OSDQUINTATHQuinta TH - Handheld transmitter for conference system

Quinta DIGITAL WIRELESS CONFERENCE SYSTEM Operating Instructions Quinta – Contents 2 1.Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page4 1.1Quinta CU Control Unit / Quinta Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page4 1.2Quinta MU Microphone Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page5 1.3Quinta TH Handheld Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page5 1.4Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page5 2.Quinta CU Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page7 2.1Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page7 2.2Where to Place the Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page8 2.3How to Connect the Antennae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page8 2.3.1 Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page8 2.3.2 Remote Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page8 2.4Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page9 2.5Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page9 2.6Connection of Media Control System and PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page9 2.7How to Switch the Control Unit On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10 2.8Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10 2.9Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11 2.9.1 Master Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11 2.9.2 Room Combining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12 2.9.3 Ethernet Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15 2.9.4 AVB Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16 2.9.5 RF-Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16 2.9.6 Firmware Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16 3.Quinta MU Microphone Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17 3.1Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17 3.2How to Connect the Gooseneck Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20 3.3Switching On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20 3.4Powering / Operating Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21 3.5Powering with CA 2459 Mains Power Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21 3.6Operating Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22 3.6.1 Normal Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22 3.6.2 FiFo Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22 3.6.3 Push-To-Talk Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22 3.6.4 Voice Activation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22 3.7Maintenance of the Microphone Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23 4.Programmable Functions of the Microphone Units with the Quinta Conference Software . . . . . . . . . . . . . Page 23 4.1Security Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23 4.2Programmable Function Button of the Chairman Microphone Unit . . . . . . . . . . . . . . . . . . . . . . Page 23 4.3Request-To-Talk Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25 5.Quinta CD 2 Charger in the Quinta CC 2 | CC 2 / 600 Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26 5.1How to Use the Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26 5.2Charging Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26 6.Battery Charging with External Mains Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 27 7.Quinta TH Handheld Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 [email protected] | www.beyerdynamic.com For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Contents subject to change without notice. E1 / Quinta TH (04.15) Quinta TH Digital Handheld Transmitter Order # 729.329 FEATURES • Ergonomic, anodised aluminium housing • Various interchangeable microphone heads optional available (recommended: TG V56w cardioid microphone head, electret condenser,) • Three-coloured backlit soft touch button with braille inscription to switch the microphone on or off • Direct Sequence Spread Spectrum (DSSS) provides high immunity from interference and unauthorised listening, even when using other radio systems • Wireless transmission with integrated True Diversity antenna technology for transmitting and receiving • Three selectable frequency bands : 2.4 / 5.2 / 5.8 GHz • Automatic or manual silent change to an interference-free frequency response acc. to EN 3000328 ETSI • Digital 128-bit encryption and additional 24-bit PIN code against unauthorised listening • Parameters can be programmed via the control unit and the appropriate configuration software • Automatic Power OFF when the control unit is in the stand-by mode or switched off • Charging status of the battery can be monitored and transmitted to the control unit • Operating control LED indicates the status when the minimum capacity is too low • Charging contacts for charging the rechargeable batteries in the WA-CD charging unit (optional WA-CD as double charger, charging time approx. 2.5 hours) • Operating time approx. 10 hours (depending on the battery type and frequency band) • Power supply 2x AA alkaline batteries or 2x AA NiMH batteries 1 of 4 Supplied without interchangeable microphone head Quinta TH DESCRIPTION The Quinta TH handheld transmitter is provided with a three- coloured backlit microphone button containing a braille inscription to turn the microphone on or off. The transmitter can be combined with three top microphone heads to ensure superior flexibility for different applications. With the Automatic Channel Allocation function, the transmitting channels of the microphone units / handeheld transmitters are allocated automatically. When the microphone button is pressed in the manual operating mode, the request-to-talk is received by the control unit (a possible external dual colour LED will illuminate red). The control unit checks which of the available receiving channels is free, then the control unit informs the microphone unit / handheld transmitter which channel it should use for transmitting. When the channel of the microphone unit / handheld transmitter is set and checked by the control unit, the microphone is switched on. The ready-to-talk status of the microphone is also indicated by the green lighting microphone button. In the Request-to-Talk-mode of the discussion system the request-to-talk is received, but the microphone is not switched on. The red lighting microphone button indicates that the request-to-talk has been received. The micro- phone is switched on by the operator at the PC by using the “Quinta Conference” software or a media control system. When the microphone button is pressed once again, the delegate clears his/her request-to-talk. Depending on the configuration with the “Quinta Conference” software the following operating modes are available: Override:the first microphone is switched off, when the maximum number of active microphones is exceeded. Voice activation:the microphone is switched on, when someone speaks into it. Push-To-Talk:the microphone button is held down, while the participant is speaking. The parameters of the microphone unit are adjusted via PC by using the “Quinta Conference” software. The parameters are adjusted for all microphone units and handheld transmitters. All microphone units and handheld transmitters have an individual address. Therefore, microphone units and handheld transmitters can be rented or purchased at any time to complement an existing system. In the rental business existing systems can be complemented in this way. The DSSS transmission offers high immunity against unauthorised listening with a 128-bit encryption. In addition to this, the conference system including the appropriate microphone units can be protected with PIN code (24-bit). A microphone unit that does not have the correct PIN code will be identified by the control unit and switched off immediately. The operating time of the transmitter is approx. 10 hours with two AA alkaline batteries or the supplied rechargeable batteries, depending on the participation in the discussion. When the remaining operating time is less than 1 hour, the LED on the bottom of the transmitter starts flashing. When using rechargeable batteries, the charging time for a completely empty rechargeable battery is approx. 2.5 hours by using the optional WA-CD charger. Depending on the use of the handheld transmitter, the charging time can be less. The microphone unit is switched on by briefly pressing the micro- phone button once. There are various ways to switch off the microphone unit: 1. Press the microphone button for 3 seconds. 2. Press the standby button of the Quinta CU control unit for 3 seconds to switch off all activated microphone units. 3. Switch off all microphone units via an RS 232 or TCP/IP command from the PC or media control system. 4. Switch off the control unit; after approx. 3 minutes the micro- phone unit will be switched off. beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 [email protected] | www.beyerdynamic.com For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Contents subject to change without notice. E1 / Quinta TH (04.15) 2 of 4 OPTIONALACCESSORIES Inte…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 4.5.2015 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model names OSDQUINTATH Quinta TH For the product stated above, we request permanent confidentiality for exhibits which contain Operational Description, Block Diagram, Schematics, Parts Lists or Tune Up Information. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely, (signed) Name: i.V. Ulrich Roth, Director of R&D Company: beyerdynamic GmbH & Co. KG Address: Theresienstrasse 8 74072 Heilbronn Germany Phone: +49 7131 617 155 Fax: +49 7131 617 224 Email: [email protected]

Test report no.: 1-8141/14-01-01_AnnexA Page 1 of 6 Annex A This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: Marco Bertolino Radio Communications & EMC Test report no.: 1-8141/14-01-01_AnnexA Page 2 of 6 External ph ot os o f t he EU T Photo 1: Photo 2: Test report no.: 1-8141/14-01-01_AnnexA Page 3 of 6 Photo 3: Photo 4: Test report no.: 1-8141/14-01-01_AnnexA Page 4 of 6 Photo 5: Photo 6: Test report no.: 1-8141/14-01-01_AnnexA Page 5 of 6 Photo 7: Photo 8: Test report no.: 1-8141/14-01-01_AnnexA Page 6 of 6 Docu men t his to r y Version Applied changes Date of release Initial release 2015-04-13

Test report no.: 1-8141/14-01-01_AnnexB Page 1 of 8 Annex B This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: Marco Bertolino Radio Communications & EMC Test report no.: 1-8141/14-01-01_AnnexB Page 2 of 8 Inter nal p ho tos of the E UT Photo 1: Photo 2: Test report no.: 1-8141/14-01-01_AnnexB Page 3 of 8 Photo 3: Photo 4: Test report no.: 1-8141/14-01-01_AnnexB Page 4 of 8 Photo 5: Photo 6: Test report no.: 1-8141/14-01-01_AnnexB Page 5 of 8 Photo 7: Photo 8: Test report no.: 1-8141/14-01-01_AnnexB Page 6 of 8 Photo 9: Photo 10: Test report no.: 1-8141/14-01-01_AnnexB Page 7 of 8 Photo 11: Test report no.: 1-8141/14-01-01_AnnexB Page 8 of 8 Docu men t his to r y Version Applied changes Date of release Initial release 2015-04-17

FCC ID: OSDQUINTATH IC: 3628A-QUINTATH Model: QUINTA TH SAR test exclusion according to KDB447498 (General RF Exposure Guidance v05) Equation from Chapter 4.3.1: Standalone SAR test exclusion considerations page 11 and ff. (1) Standalone SAR test exclusion for 100 MHz to 6 GHz at test separation distances ≤ 50mm ( Threshold 1-g;10-g ) * d seperation / f 0.5 where Threshold 1-g;10-g is 3 for 1-g; 7.5 for 10-g d seperation is the min. test separation distance; 5mm is used if the distance is less f is the RF channel transmit frequency The table below gives the calculated maximal power that could be used for source based time averaged conducted power, adjusted for tune up tolerance. If this is below the calculated value SAR testing is obsolete. f in [MHz] d separation [mm]Threshold 1-g;10-g Powerlimit [mW] P max-declared [mW] Exclusion 2412703 135 63yes 5180703 92 16yes 5814703 87 20yes ------------------------------------------- Marco Bertolino CETECOM ICT Services GmbH Untertürkheimer Str.6-10 - 66117 Saarbrücken - Germany

TEST REPORT Test report no.: 1-8141/14-01-10 Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-00 beyerdynamic GmbH & Co. KG Theresienstraße 8 74072 Heilbronn / GERMANY Phone: +49 7131 617-0 Fax: +49 7131 617-215 Contact: Ulrich Roth e-mail: [email protected] Phone: +49 7131 617-155 Manufacturer beyerdynamic GmbH & Co. KG Theresienstraße 8 74072 Heilbronn / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications Radio Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS - 210 Issue 8 Amendment 1 RSS-210, Amendment 1 — Licence-Exempt, Low-Power Radio Apparatus Operating in the Television Bands (February 2015) For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Wireless Microphone System Model name: Quinta FCC ID: OSDQUINTATH IC: 3628A-QUINTATH Frequency: DTS band 2400 MHz to 2483.5 MHz Technology tested: Proprietary DSSS Antenna: 2 Integrated antennas Power supply: 3.0 V DC by battery Temperature range: 0°C to +40°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: Marco Bertolino Christoph Schneider Radio Communications & EMC Radio Communications & EMC Test report no.: 1-8141/14-01-10 Page 2 of 95 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 3.1 Measurement guidance ....................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 5.1 Additional information ........................................................................................................................ 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Description of the test setup ......................................................................................................................... 5 7.1 Radiated measurements chamber F .................................................................................................. 5 7.2 Radiated measurements chamber C ................................................................................................. 6 7.3 Radiated measurements 12.75 GHz to 26 GHz ................................................................................. 7 7.4 Conducted measurements ................................................................................................................. 8 8 Summary of measurement results ............................................................................................................... 9 9 Additional comments ................................................................................................................................... 10 10 Measurement results ................................................................................................................................ 11 10.1 Antenna gain .................................................................................................................................. 11 10.2 Maximum output power ................................................................................................................. 17 10.3 Power spectral density .................................................................................................................. 19 10.4 DTS bandwidth – 6 dB ................................................................................................................... 27 10.5 Occupied bandwidth – 99% emission bandwidth....................................................................... 29 10.6 Detailed spurious emissions @ the band edge - conducted .................................................... 37 10.7 Band edge compliance radiated ................................................................................................... 42 10.8 TX spurious emissions conducted .............................................................................................. 48 10.9 TX spurious emissions radiated......................................................................…

Text truncated - open the document above for the full version.

Test report no.: 1-8141/14-01-01_AnnexD Page 1 of 6 Annex D This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: Marco Bertolino Radio Communications & EMC Test report no.: 1-8141/14-01-01_AnnexD Page 2 of 6 EUT Test se tu p p h otos Photo 1: Photo 2: Test report no.: 1-8141/14-01-01_AnnexD Page 3 of 6 Photo 3: Photo 4: Test report no.: 1-8141/14-01-01_AnnexD Page 4 of 6 Photo 5: Photo 6: Test report no.: 1-8141/14-01-01_AnnexD Page 5 of 6 Photo 7: Photo 8: Test report no.: 1-8141/14-01-01_AnnexD Page 6 of 6 Docu men t his to r y Version Applied changes Date of release Initial release 2015-04-13