OSHPTI88M7KNKMTERFM Hands-Free Kit

PROPOSED FCC ID LABEL AND LOCATION PRIORITY TECH., INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: OSHPTI88M7KNKMTER FCC ID LABEL

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT TESTED TO FCC PART 15 REQUIREMENTS For INTENTIONAL RADIATOR FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE MODEL NO: HFK-DDB-MT00STARBK HFK-SSB-NK006190BK, HFK-DDB-ER000788BK FCC ID: OSHPTI88M7KNKMTER REPORT NO: 00U0186-1 ISSUE DATE: MAY 03, 2000 Prepared for PRIORITY TECH, INC. 46771 GREMONT BLVD. FREMONT, CA 94538 USA Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089, USA TEL: (408) 752-8166 FAX: (408) 752-8168 REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE....................................1 2. PRODUCT DESCRIPTION...........................................2 3. TEST FACILITY .................................................2 4. MEASUREMENT STANDARDS.........................................2 5. TEST METHODOLOGY ..............................................2 6. MEASUREMENT EQUIPMENT USED....................................2 7. RADIATED EMISSION LIMITS......................................3 8. SYSTEM TEST CONFIGURATION.....................................3 9. TEST PROCEDURE ................................................4 10. SETUP PHOTOS .................................................6 11. TEST RESULT ..................................................7 TEST DATA REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 1 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. VERIFICATION OF COMPLIANCE COMPANY NAME : PRIORITY TECH, INC. 46771 FREMONT BLVD. FREMONT, CA 94538 USA CONTACT PERSON : C. H. PAN/ PRESIDENT TELEPHONE NO. : (510) 226-7800 EUT DESCRIPTION : FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE MODEL NAME/NUMBER : HFK-DDB-MT00STARBK, HFK-DDB-NK006190BK HFK-DDB-ER000788BK DATE TESTED : MAY 03, 2000 REPORT NUMBER : 00U0186 TYPE OF EQUIPMENT FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE EQUIPMENT TYPE 88.7MHz RECEIVER MEASUREMENT PROCEDURE ANSI C63.4 / 1992 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15 The above equipment was tested by Compliance Engineering Services, Inc. for compliance with the requirements set forth in CFR 47, PART 15. This said equipment in the configuration described in this report shows that maximum emission levels emanating from equipment are within the compliance requirements. Warning : This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification will constitute fraud and shall nullify the document. T. N. COKENIAS / ENGIEERING DIRECTOR COMPLIANCE CERTIFICATION SERVICES REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 2 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2. PRODUCT DESCRIPTION Fundamental Frequency88.7 MHz Power SourceFROM VEHICLE DC UsageVEHICLE HANDS-FREE KIT Power Requirement12 VDC Antenna RequirementPermanently attached 3. TEST FACILITY The 3/10/30 meter open area test site and conducted measurement facility used to collect the radiated data is located at 561F Monterey Road, Morgan Hill, California, U.S.A. A detailed description of the test facility was submitted to the Commission on May 27,1994. 4. MEASUREMENT STANDARDS The site is constructed and calibrated in conformance with the requirements of ANSI C63.4/1992. 5. TEST METHODOLOGY For an intentional radiator, the spectrum shall be investigated from the lowest radio frequency signal generated in the device, without going below 9 KHz, up to at least the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. (CFR 47 Section 15.33) 6. MEASUREMENT EQUIPMENT USED Manufacturer Model Number Description Cal Due Date H.P. 8593EM EMC RECEIVER 9K-26.5GHz 09/2000 SCHAFFUER- CHASE CBL6112B Antenna 02/2001 H.P. 8447D Preamplifier (0.1 - 1300 MHz) 09/2000 REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 3 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 7. RADIATED EMISSION LIMITS GENERAL REQUI…

Text truncated - open the document above for the full version.

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT TESTED TO FCC PART 15 REQUIREMENTS For INTENTIONAL RADIATOR FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE MODEL NO: HFK-DDB-MT00STARBK HFK-SSB-NK006190BK, HFK-DDB-ER000788BK FCC ID: OSHPTI88M7KNKMTER REPORT NO: 00U0186-1 ISSUE DATE: MAY 03, 2000 Prepared for PRIORITY TECH, INC. 46771 GREMONT BLVD. FREMONT, CA 94538 USA Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089, USA TEL: (408) 752-8166 FAX: (408) 752-8168 REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE....................................1 2. PRODUCT DESCRIPTION...........................................2 3. TEST FACILITY .................................................2 4. MEASUREMENT STANDARDS.........................................2 5. TEST METHODOLOGY ..............................................2 6. MEASUREMENT EQUIPMENT USED....................................2 7. RADIATED EMISSION LIMITS......................................3 8. SYSTEM TEST CONFIGURATION.....................................3 9. TEST PROCEDURE ................................................4 10. SETUP PHOTOS .................................................6 11. TEST RESULT ..................................................7 TEST DATA REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 1 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. VERIFICATION OF COMPLIANCE COMPANY NAME : PRIORITY TECH, INC. 46771 FREMONT BLVD. FREMONT, CA 94538 USA CONTACT PERSON : C. H. PAN/ PRESIDENT TELEPHONE NO. : (510) 226-7800 EUT DESCRIPTION : FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE MODEL NAME/NUMBER : HFK-DDB-MT00STARBK, HFK-DDB-NK006190BK HFK-DDB-ER000788BK DATE TESTED : MAY 03, 2000 REPORT NUMBER : 00U0186 TYPE OF EQUIPMENT FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE EQUIPMENT TYPE 88.7MHz RECEIVER MEASUREMENT PROCEDURE ANSI C63.4 / 1992 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15 The above equipment was tested by Compliance Engineering Services, Inc. for compliance with the requirements set forth in CFR 47, PART 15. This said equipment in the configuration described in this report shows that maximum emission levels emanating from equipment are within the compliance requirements. Warning : This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification will constitute fraud and shall nullify the document. T. N. COKENIAS / ENGIEERING DIRECTOR COMPLIANCE CERTIFICATION SERVICES REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 2 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2. PRODUCT DESCRIPTION Fundamental Frequency88.7 MHz Power SourceFROM VEHICLE DC UsageVEHICLE HANDS-FREE KIT Power Requirement12 VDC Antenna RequirementPermanently attached 3. TEST FACILITY The 3/10/30 meter open area test site and conducted measurement facility used to collect the radiated data is located at 561F Monterey Road, Morgan Hill, California, U.S.A. A detailed description of the test facility was submitted to the Commission on May 27,1994. 4. MEASUREMENT STANDARDS The site is constructed and calibrated in conformance with the requirements of ANSI C63.4/1992. 5. TEST METHODOLOGY For an intentional radiator, the spectrum shall be investigated from the lowest radio frequency signal generated in the device, without going below 9 KHz, up to at least the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. (CFR 47 Section 15.33) 6. MEASUREMENT EQUIPMENT USED Manufacturer Model Number Description Cal Due Date H.P. 8593EM EMC RECEIVER 9K-26.5GHz 09/2000 SCHAFFUER- CHASE CBL6112B Antenna 02/2001 H.P. 8447D Preamplifier (0.1 - 1300 MHz) 09/2000 REPORT NO: 00U0186FCC ID: OSHPTI88M7KNKMTER DATE: MAY 03, 2000 EUT: FM WIRELESS HANDS FREE KIT TO BE USED WITH CELL PHONE INSIDE A VEHICLE Page No: 3 COMPLIANCE ENGINEERING SERVICES, INC.CCS DOCUMENT NO:CCSUP4020B 1366 BORDEAUX DRIVE, SUNNYVALE, CA 94089, USATEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 7. RADIATED EMISSION LIMITS GENERAL REQUI…

Text truncated - open the document above for the full version.