OV8-LOGREP3-1Repeater for extending the operating distance of the LOG N-3 M

Consultation with SebaKMT 1 User Manual Noise Level and Frequency Logger Sebalog N3 1 (08/2011) - ENG Mess- und Ortungstechnik Measuring and Locating Technologies Elektrizitätsnetze Power Networks Kommunikationsnetze Communication Networks Rohrleitungsnetze Water Networks Abwassernetze Sewer Systems Leitungsortung Line Locating Consultation with SebaKMT 2 Consultation with SebaKMT 3 Consultation with SebaKMT The present system manual has been designed as an operating guide and for reference. It is meant to answer your questions and solve your problems in as fast and easy a way as possible. Please start with referring to this manual should any trouble occur. In doing so, make use of the table of contents and read the relevant paragraph with great attention. Furthermore, check all terminals and connections of the instruments involved. Should any question remain unanswered, please contact: Seba Dynatronic Mess- und Ortungstechnik GmbH Hagenuk KMT Kabelmesstechnik GmbH Dr.-Herbert-Iann-Str. 6 D - 96148 Baunach Phone: +49 / 9544 / 68 – 0 Fax: +49 / 9544 / 22 73 Röderaue 41 D - 01471 Radeburg / Dresden Phone: +49 / 35208 / 84 – 0 Fax: +49 / 35208 / 84 249 E-Mail: [email protected] http://www.sebakmt.com  SebaKMT All rights reserved. No part of this handbook may be copied by photographic or other means unless SebaKMT have before-hand declared their consent in writing. The content of this handbook is subject to change without notice. SebaKMT cannot be made liable for technical or printing errors or shortcomings of this handbook. SebaKMT also disclaim all responsibility for damage resulting directly or indirectly from the delivery, supply, or use of this matter. Terms of Warranty 4 Terms of Warranty SebaKMT accept responsibility for a claim under warranty brought forward by a customer for a product sold by SebaKMT under the terms stated below. SebaKMT warrant that at the time of delivery SebaKMT products are free from manufacturing or material defects which might considerably reduce their value or usability. This warranty does not apply to faults in the software supplied. During the period of warranty, SebaKMT agree to repair faulty parts or replace them with new parts or parts as new (with the same usability and life as new parts) according to their choice. SebaKMT reject all further claims under warranty, in particular those from consequential damage. Each component and product replaced in accordance with this warranty becomes the property of SebaKMT. All warranty claims versus SebaKMT are hereby limited to a period of 12 months from the date of delivery. Each component supplied by SebaKMT within the context of warranty will also be covered by this warranty for the remaining period of time but for 90 days at least. Each measure to remedy a claim under warranty shall exclusively be carried out by SebaKMT or an authorized service station. To register a claim under the provisions of this warranty, the customer has to complain about the defect, in case of an immediately detectable fault within 10 days from the date of delivery. This warranty does not apply to any fault or damage caused by exposing a product to conditions not in accordance with this specification, by storing, transporting, or using it improperly, or having it serviced or installed by a workshop not authorized by SebaKMT. All responsibility is disclaimed for damage due to wear, will of God, or connection to foreign components. For damage resulting from a violation of their duty to repair or re-supply items, SebaKMT can be made liable only in case of severe negligence or intention. Any liability for slight negligence is disclaimed. Contents 5 Contents Consultation with SebaKMT ........................................................................................... 3 Terms of Warranty ........................................................................................................... 4 Contents ........................................................................................................................... 5 1 Technical description ...................................................................................... 7 1.1 Technical data .................................................................................................... 9 1.2 Scope of delivery and accessories ................................................................... 12 1.3 Optional accessories ........................................................................................ 12 2 Important and common terms ...................................................................... 13 3 The loggers ..................................................................................................... 15 3.1 Function ............................................................................................................ 15 3.2 Design .............................................................................................................. 16 3.3 Switching on and off ......................................................................................... 17 3.4 Memory............................................................................................................. 17 3.5 Power supply .................................................................................................... 17 4 The Commander ............................................................................................. 18 4.1 Function ............................................................................................................ 18 4.2 Device design ................................................................................................... 19 4.3 Design of the user interface ............................................................................. 20 4.4 Basics of operation ........................................................................................... 21 4.5 User mode ...........................................…

Text truncated - open the document above for the full version.

Request for Confidentiality Date: 05.10.2012 Subject: Confidentiality Request for: FCC ID: OV8-LOGREP3-1 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Seba Dynatronic Mess- und Ortungstechnik GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Manager Certification Thomas Ring (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 26 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 7 P h o t o d o c u m e n t a t i on 7.1 External photos of the EUT Left side view / label placement (Label for European market) Label view (Label for European market) FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 27 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 Right side view (on/off magnetic switch) Front view FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 28 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 Top view Bottom view

FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 30 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 7.2 Internal photos of the EUT Open casing FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 31 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 Antenna / PCB side view FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 32 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 PCB top view PCB bottom view FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 33 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 RF module top view (zoom)

FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 1 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 EMI − T E S T R E P O R T - FCC Part 90.217 - Test Report No. : T35704-00-00KJ 12 October 2012 ______________________________________________________________________________________________ Date of issue Type / Model Name : LOG Repeater 3-M Product Description : Repeater for extending the operating distance of the LOG N-3M Applicant : Seba Dynatronic Mess- und Ortungstechnik GmbH Address : Dr.-Herbert-Iann-Str. 6 96148 BAUNACH, GERMANY Manufacturer : Seba Dynatronic Mess- und Ortungstechnik GmbH Address : Dr.-Herbert-Iann-Str. 6 96148 BAUNACH, GERMANY Licence holder : Seba Dynatronic Mess- und Ortungstechnik GmbH Address : Dr.-Herbert-Iann-Str. 6 96148 BAUNACH, GERMANY Test Result according to the standards listed in clause 1 test standards: POSITIVE The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 2 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 Contents 1 T E S T S T A N D A R D S 3 1.1 Test result summary 3 2 G e n e r a l r e m a r k s 4 2.1 Final assessment 4 3 E Q U I P M E N T U N D E R T E S T 5 3.1 Power supply system utilised 5 3.2 Short description of the equipment under test (EUT) 5 4 T E S T E N V I R O N M E N T 6 4.1 Address of the test laboratory 6 4.2 Environmental conditions 6 4.3 Statement of the measurement uncertainty 6 4.4 Measurement protocol for FCC 7 5 T E S T C O N D I T I O N S A N D R E S U L T S 9 5.1 Conducted emissions 9 5.2 Maximum output power radiated 10 5.3 Spurious emissions radiated (electric field) 12 5.4 Modulation characteristics 14 5.5 Occupied bandwidth 17 5.6 Frequency stability 20 5.8 Receiver spurious emissions, radiated 23 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 25 7 P h o t o d o c u m e n t a t i o n 26 7.1 External photos of the EUT 26 7.2 Internal photos of the EUT 30 FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 3 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC 47 CFR Part 2: 2011 Frequency allocations and radio treaty matters; General rules and regulations FCC 47 CFR Part 15: 2011 Radio frequency devices FCC 47 CFR Part 90: 2011 Private land mobile radio services ANSI/TIA-603-C: 2004 Land Mobile FM or PM-Communications Equipment - Measurement and Performance Standards ANSI C63.4: 2003 Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. KDB 412172 D01: 2010 Determining ERP and EIRP 1.1 Test result summary Wireless repeater using digital modulation: Operating in the frequency band from 902 MHz to 928 MHz: Description FCC Rule Part Test Procedure Result AC power line conducted emissions 15.107(a) ANSI C63.4:2003 not applicable Maximum output power 90.217 ANSI/TIA-603-C-2004 passed Spurious emissions radiated 90.217(a) ANSI/TIA-603-C-2004 passed Modulation characteristics 90.217(a) ANSI/TIA-603-C-2004 passed Occupied bandwith General ANSI/TIA-603-C-2004 passed Frequency stability 90.213(a)(b) ANSI/TIA-603-C-2004 passed Receiver spurious emissions 15.109 ANSI C63.4:2003 passed FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 4 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 2 G e n e r a l r e m a r k s Items Description Power supply 3.6 V DC powered (lithium battery) Type of modulation FSK Operating frequency 913.02 MHz Frequency band 902 MHz to 928 MHz Data rate 9.6 kBd Channel spacing - Number of channels 1 Antenna type Internal circular F-antenna Antenna connector Integral Antenna gain 2.1 dBi Lowest internal frequency 32.768 kHz Highest internal frequency 26.0 MHz 2.1 Final assessment The equipment under test fulfills the EMI requirements cited in clause 1 test standards. Date of receipt of test sample : acc. to storage records Testing commenced on : 30. November 2011 Testing concluded on : 14. June 2012 Checked by: Tested by: Klaus Gegenfurtner Dipl. Ing.(FH) Manager: Radio Group Josef Knab Radio Senior Expert FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 5 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 3 E Q U I P M E N T U N D E R T E S T 3.1 Power supply system utilised Power supply voltage : 3.6 V DC (lithium battery) V nom = 3.6 V V min = 3.0 V V max = 3.7 V Max. current: TX mode 35 mA RX mode 20 mA 3.2 Short description of the equipment under test (EUT) The EUT is a wireless repeater for water leak detection system. Number of tested samples: 1 Serial number: 0821000448 EUT operation mode: The equipment under test was operated during the measurement under the following conditions: - cont. TX at 913.02 MHz (unmodulated) - cont. TX at 913.02 MHz (modulated) - cont. RX mode EUT configuration: (The CDF filled by the applicant can be viewed at the test laboratory.) The following peripheral devices and interface cables were connected during the measurements: - Model : - Model : - Model : FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 6 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 4 T E S T E N V I R O N M E N T 4.1 Address of the test laboratory mikes-testingpartners gmbh Ohmstrasse 2-4 94342 STRASSKIRCHEN GERMANY 4.2 Environmental conditions During the measure…

Text truncated - open the document above for the full version.

FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 10 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 5.2 Maximum output power radiated For test instruments and accessories used see section 6 Part CPR 2. 5.2.1 Description of the test location Test location: OATS 1 Test distance: 3 m 5.2.2 Photo documentation of the test set-up FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 12 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 5.3 Spurious emissions radiated (electric field) For test instruments and accessories used see section 6 Part SER 2, SER 3. 5.3.1 Description of the test location Test location: OATS 1 Test location: Anechoic chamber 2 Test distance: 3 m 5.3.2 Photo documentation of the test set-up FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 14 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 5.4 Modulation characteristics For test instruments and accessories used see section 6 Part MB. 5.4.1 Description of the test location Test location: METROLOGY 5.4.2 Photo documentation of the test set-up FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 17 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 5.5 Occupied bandwidth For test instruments and accessories used see section 6 Part MB. 5.5.1 Description of the test location Test location: METROLOGY 5.5.2 Photo documentation of the test set-up FCC: OV8-LOGREP3-1 mikes-testingpartners gmbh File No. T35704-00-00KJ, page 20 of 33 Ohmstrasse 2-4  94342 STRASSKIRCHEN  GERMANY Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481240 Rev. No. 1.2, 25.8.2011 5.6 Frequency stability For test instruments and accessories used see section 6 Part MB. 5.6.1 Description of the test location Test location: METROLOGY 5.6.2 Photo documentation of the test setup