OVJW307Bluetooth Wristband

BT (BLUE TOOTH) PAIRING: In first time BT pairing, increase the unit to the BT device list in your Smart Phone as below: 1. After installed the App into your Smart Phone, turn on your Smart Phone BT, found the logo of App in your Smart Phone then open it, the follows figure will appear on the screen: 2. After setting personal data, touch “back”, it will appear below figure; then touch “ ” on the upside of the screen to enter, the follows figure will appear on the screen: Watch Strap LOCATION OF CONTROLS 2 FCC INFORMATION FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not used these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: ~ Reorient or relocate the receiving antenna ~ Increase the separation between the equipment and receiver. ~ Connect the equipment into an outlet on circuit different from that to which the receiver is connected. ~ Consult the dealer or an experienced radio radio/TV technician for help. 1 LED Display Current Time Month/Day Battery Power Meter Touch Mode 12 Hours System The unit has a built in DC 3.7V Li-polymer rechargeable battery, recharge it before first time use (or when the battery was consumed, appear on the display) as follows: 1. Take out the unit from the Watch Strap as the figure below: 2. Connect the small round plug from the supplied Charging Cable to the DC IN Jack on the unit. 3. Connect the full size USB plug to the USB port on a computer or any USB charger with DC 5V output. Charging will auto start. During charging, the scale bars on the Battery Power Meter will blink. When finished, it will stop blinking. Notes: Your battery will last longer if you following these simple guidelines for charging and storing. A. Recharging and store the unit within the temperature range of 5°C~35°C (40°F~ 95°F). B. Do not over charge (longer than 1 hour). Excessive charging or discharging may shorten the battery’s life. C. Battery life naturally shortens slowly over time. D. The rechargeable battery incorporated in this product is not user replaceable. Before first time use, download and installed the suitable App (Application) from the iPhone store/Google Play Store as below: If you are using smart Phone, download and installed the App “Craig Tracker” from iPhone Store/Google Play Store or into your cell phone. List of compatible phones: 6 APPS (APPLICATIONS) INSTALLATION 5 POWER SOURCE BrandPhone TypeOperaƟng SystemApp StoreBluetooth iPhoneiPhone 4SiOS 7.0.0 aboveiPhone Store Bluetooth 4.0 above iPhone 5iOS 7.0.0 aboveiPhone Store iPhone 5CiOS 7.0.0 aboveiPhone Store iPhone 5SiOS 7.0.0 aboveiPhone Store iPhone 6iOS 7.0.0 aboveiPhone Store iPhone 6plusiOS 7.0.0 aboveiPhone Store iPodiOS 7.0.0 aboveiPhone Store iPadiOS 7.0.0 aboveiPhone Store SamsungGalaxy S3Android 4.3 abovePlay Store Galaxy S4Android 4.3 abovePlay Store Galaxy S5Android 4.3 abovePlay Store Galaxy S6Android 4.3 abovePlay Store Note IIAndroid 4.3 abovePlay Store Note IIIAndroid 4.3 abovePlay Store Note IVAndroid 4.3 abovePlay Store GoogleNexus4/Nexus7/AboveAndroid 4.3 aboveGoogle Play MEIZUMX4Android 4.3 aboveGoogle Play MAIN FUNCTIONS ‡7UDQVPLWGDWDYLD%OXHWRRWK/RZ(QHUJ\ %OXHWRRWK  ‡7LPHPRGHGLVSOD\PLQXWHKRXUGD\PRQWKDQGSRZHU status. ‡'DWDGLVSOD\FXUUHQWVWHSVFDORULHVGLVWDQFH exercise time and target completion rate. ‡6OHHSPRQLWRULQJ ‡GD\VWRWDOZRUNRXWPHPRU\ ‡4XDQWLW\RIXQUHDGPHVVDJHDQGLQFRPLQJFDOOVKRZ incoming phone No.and call name in English (Android OS). FUNCTIONS OF WRISTBAND 3 MAIN MODES Time Step Calorie Goal Progress Exersice Time Distance Alarm Missing Call Unread Message Incoming call Name(in English) & Phone No. Sleep Mode READ BEFORE USING WRISTBAND 4 1. For the first time to use Activity Tracker, touch and hold for 5s to wake up the tracker and go to time mode. Time will default display 12:00. 2. Each touching the mode will wake up the display and it will enter power saving mode automatically after no operation for 20s under any mode display. 3. Clear all data(steps, calories burned, distance, target goal) of the day at midnight. 4. Touch and hold for 5s at any mode, it will enter sleep mode. At sleep monitor mode, touch and hold for 5s to wake up the wristband and go back to the mode before sleep monitor. When alarm rings under sleep mode, the vibration will also wake up the wristband. 5When in Sleep Mode, datas could not be synced to the apps. 6. Android Phones: after paired with wristband, the wristband could display incoming phone name in English and phone NO., quantity of missing call and unread message. ANDROID APP 7 3. Touch “BT Pairing”, the follows figure will appear on the screen; 4.Wait until the Name “CC431”, of the unit appear on the screen (During searching make sure the display of the unit is illuminate. If it is auto turned off, touch the Button to turn it on again.) 8 910111213 wait approx. 2 seconds 5. Touch the device No. “CC431”, and keep the wristband illuminate, this column to start pairing. 6. When paired, a small “ ” will pop up on the screen as the figure below. ~Touch the paired device address, can connect and unpair the unit. 7.Touch “Back”, below screen will appear. SETTINGS: After BT paired, set or reset the personal information into the unit as bellows: ~ Daily Goal: Set or reset your step goal. ~ Stride: Set or reset your stride in inch. ~ Wear Way: Set o…

Text truncated - open the document above for the full version.

Million Concept Electronic (Shenzhen) Co., Ltd No.98,Xiashanmen Road, Songgang Town, Bao'anDistrict, Shenzhen 518105, China TEL: 86-755-33663118 FAX: 86-755-33925026 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/30/2015 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: OVJW307 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Million Concept Electronic (Shenzhen) Co., Ltd Contact person: Yiqin Liu Title: Manager

Million Concept Electronic (Shenzhen) Co., Ltd No.98,Xiashanmen Road, Songgang Town, Bao'anDistrict, Shenzhen 518105, China TEL: 86-755-33663118 FAX: 86-755-33925026 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/30/2015 Request for Confidentiality Company name: Million Concept Electronic (Shenzhen) Co., Ltd FCC ID: OVJW307 FCC Part 15 Certification Gentlemen, In accordance with CFR 47 § 0.459, Million Concept Electronic (Shenzhen) Co., Ltd hereby requests confidentiality of following attachments: (1) schematic diagrams, (2) detailed block diagrams, (3) detailed operational descriptions, (4) parts lists. These documents contain detailed system and equipment description and related information about the product which Million Concept Electronic (Shenzhen) Co., Ltd considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Million Concept Electronic (Shenzhen) Co., Ltd considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature [Yiqin Liu] [Manager] Million Concept Electronic (Shenzhen) Co., Ltd No.98,Xiashanmen Road, Songgang Town, Bao'anDistrict, Shenzhen 518105, China

External Photos TOTAL VIEW OF EUT-1 TOTAL VIEW OF EUT-2 TOP VIEW OF EUT BOTTOM VIEW OF EUT USB Metal FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location Brand: isport Model:W307 FCC ID: OVJW307

Internal Photos OPEN VIEW OF EUT-1 OPEN VIEW OF EUT-2 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 Antenna

RF Exposure evaluation Product Description:Bluetooth Wristband Model Number: W307 FCC ID: OVJW307 According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation According to the follow transmitter output power（P t ）formula： P t =（E x d） 2 /（30 x g t ） P t =transmitter output power in watts g t =numeric gain of the transmitting antenna (unitess) E=electric field strength in V/m d=measurement distance in meters (m) According to the above test data, Emax=90.66dBuv/m=0.034V/m,d=3m,g t =1 P t =（E x d） 2 /（30 x g t ）=(0.034x3) 2 /(30x1)=0.000347W=0.35mW The result is rounded to one decimal place for comparison Worse case is as below: [2440MHz -0.35mW output power] (0.35mW /5mm) .[√2.440(GHz)]= 0.109<3.0 for 1-g SAR Then SAR evaluation is not required NOTE: For the maximum power, you can refer FCC test report.

Page 1 of 49 FCC Test Report Report No.: AGC00929150601FE03 FCC ID : OVJW307 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Wristband BRAND NAME : isport MODEL NAME : W307 CLIENT : Million Concept Electronic(Shenzhen) Co.,Ltd. DATE OF ISSUE : July 28,2015 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00929150601FE03 Page 2 of 49 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid VersionNotes V1.0 / July 27,2015 Valid Original Report Report No.: AGC00929150601FE03 Page 3 of 49 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ............................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. PRODUCT DESCRIPTION ..................................................................................................................... 6 2.2. TABLE OF CARRIER FREQUENCYS ..................................................................................................... 6 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 7 4. DESCRIPTION OF TEST MODES ................................................................................................................. 7 5. SYSTEM TEST CONFIGURATION ............................................................................................................... 8 5.1. CONFIGURATION OF EUT SYSTEM ..................................................................................................... 8 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 8 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 8 6. TEST FACILITY ............................................................................................................................................. 9 7 ALL TEST EQUIPMENT LIST ........................................................................................................................ 9 8. RADIATED EMISSION ................................................................................................................................. 10 8.1TEST LIMIT ............................................................................................................................................. 10 8.2. MEASUREMENT PROCEDURE ............................................................................................................ 11 8.3. TEST SETUP ......................................................................................................................................... 13 8.4. TEST RESULT ....................................................................................................................................... 15 9. BAND EDGE EMISSION ............................................................................................................................. 28 9.1. MEASUREMENT PROCEDURE ........................................................................................................... 28 9.2 TEST SETUP .......................................................................................................................................... 28 9.3 RADIATED TEST RESULT ..................................................................................................................... 29 10 20DB BANDWIDTH .................................................................................................................................... 33 10.1. MEASUREMENT PROCEDURE ......................................................................................................... 33 10.2. TEST SET-UP ..................................................................................................................................... 33 10.3. LIMITS AND MEASUREMENT RESULTS ........................................................................................... 33 11. FCC LINE CONDUCTED EMISSION TEST ............................................................................................... 36 Report No.: AGC00929150601FE03 Page 4 of 49 11.1. LIMITS OF LINE CONDUCTED EMISSION TEST ............................................................................... 36 11.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST ............................................................. 36 11.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................... 37 11.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ......................................................... 37 11.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ................................................................... 38 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ........................................................................................ 40 APPENDIX B: PHOTOGRAPHS OF EUT ....................................................................................................... 43 Report No.: AGC00929150601FE03 Page 5 of 49 1. VERIFICATION OF CONFORMITY Applicant Million Concept Electronic(Shenzhen) Co.,Ltd. Address No.98, Xiashanmen Road, Songgang Town, Bao'an District, Shenzhen, China Manufacturer Million Concept Electronic(Shenzhen) Co.,Ltd Address No.98, Xiashanmen Road, Songgang Town, Bao'an District, Shenzhen, China Product Designation Bluetooth Wristband Brand Name isport Test Model W307 Date of test May 24,2015 to May 27,2015 Deviation None Condition of Test Sample Norma…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP FCC LINE CONDUCTED EMISSION TEST SETUP FCC RADIATED EMISSION TEST SETUP