OXJHPOD40HPod

User manual FCC ID：OXJHPOD40 1， Make sure you have connected the HPod to the Glucosemeter. 2， Press the button on the HPod, the led on the HPod starts to flicker（flash once per 2 seconds）. The HPod with enter into working mode. a) If no connection is established after 1 minute, the HPod will goes into standby mode with LED off. 3， When the Bluetooth connection is established, the LED would flash once per second and the HPOD will detect the GM and try to retrieve data from the GM. The LED will flash fast. If there is data unsent to the peer device, the HPod would send them to the peer device. After the data is sent out, the HPod will enter into standby mode. a) If no data is needed to sent to the peer device, the led will stop flashing and enter into standby mode. Note： a) For the Abbott GMS, if “PC” displays on the GM when plugging the cable onto it, we should unplug the cable to take another measurement. b) For the JNJ GMS, after send the data, “PC” will display on it, if we want to take another measure, we should wait 3 minute or press the “OK” button on the GMS until the PC disappear. c) We could set the local “correct” time on the GM. But with Nipro, there is a limitation that we need to specify the timezone on NantLife.com for the server to know the correct time. d) The HPod will send all records in the memory again at the first time when we change the GM with the HPOD and only the new records would be displayed on the app. IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Sep Fed Aut FCC Re: Pur s requ 1: B 2: C 3: O 4: P Th e rele app Th e all a app Sin c Nan Con p. 05, 2012 deral Comm thorization C ID: OXJH : Confiden suant to Se uests confid Block Diagra Circuit Diagra Operational D Parts List e above mat ased to the licant and p e Applicant u accompanyi lication. cerely, ntCare LLC ntact Peop 2 munication and Evalu HPOD40 ntiality Re ctions 0.457 ential treatm m am Description terials conta e public. The rovide unjus understands ng docume n C ple: Rechar n Commiss uation Divis quest 7 and 0.459 ment of infor ain trade se e public dis stified benef that pursua ntation will rd Binier sion sion 9 of the Com rmation appl ecrets and p sclosure of t fits to its com nt to Rules 0 not be mad mmission’s R ied this app proprietary these matte mpetitors. 0.457, disclo e before th Rules, the a lication as o information ers might be osure of this e date of th applicant he outlined belo not custom e harmful to s Application he Grant for ereby ow: marily o the n and r this

PHOTOGRAPHS OF THE EUT Top View of EUT Button View of EUT Front of EUT Back View of EUT Left View of EUT Right View of EUT

Label&Label Location HPod Model：HPod4.0 Brand：NantLife FCC ID: OXJHPOD40

Open View-1 of EUT Open View-2 of EUT Front View of PCB Back View of PCB Bluetooth Antenna

FCC Test Report Report No.: AGC026120602‐6F2B FCC ID : OXJHPOD40 IC : 10549A‐HPOD40 PRODUCT DESIGNATION : HPod BRAND NAME : NantLife TEST MODEL : HPod4.0 CLIENT : NantCare LLC DATE OF ISSUE : Sep.13, 2012 STANDARD(S) : FCC Part 15 Rules& RSS‐210 Attestation of Global Compliance (Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC026120602-6F2B Page 1 of 25 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ··············································································································· 3 2. GENERAL INFORMATION ···························································································································· 4 2.1.PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ····················································· 4 2.2. TEST STANDARDS ································································································································ 4 2.3. RELATED SUBMITTAL(S)/GRANT(S) ···································································································· 4 2.4. TEST METHODOLOGY ·························································································································· 5 2.5. TEST FACILITY ······································································································································· 5 2.6. ACCESSORIES EQUIPMENT LIST AND DETAILS ················································································ 5 2.7. EUT PORT&CABLE LIST AND DETAILS ································································································ 5 3. SUMMARY OF TEST RESULTS ··················································································································· 6 4. TEST MODES ················································································································································ 6 5. §15.203 - ANTENNA REQUIREMENT ·········································································································· 7 5.1. STANDARD APPLICABLE ······················································································································ 7 5.2. TEST RESULT ········································································································································ 7 6. §15.209, §15.249 RADIATED EMISSION ······································································································ 8 6.1. MEASUREMENT UNCERTAINTY ·········································································································· 8 6.2. STANDARD APPLICABLE ······················································································································ 8 6.3. TEST EQUIPMENT LIST AND DETAILS································································································· 9 6.4. TEST PROCEDURE ······························································································································· 9 6.5. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ································································· 10 6.6. TEST RESULTS ···································································································································· 12 7. §15.249 EMISSION BANDWIDTH ··············································································································· 17 7.1. STANDARD APPLICABLE ···················································································································· 17 7.2. TEST EQUIPMENT LIST AND DETAILS······························································································· 17 7.3. TEST PROCEDURE ····························································································································· 17 7.4. SUMMARY OF TEST RESULTS/PLOTS ······························································································ 17 Report No.: AGC026120602-6F2B Page 2 of 25 APPENDIX 1 ················································································································································ 20 PHOTOGRAPHS OF TEST SETUP ················································································································ 20 APPENDIX 2 ···················································································································································· 21 PHOTOGRAPHS OF EUT ······························································································································· 21 Report No.: AGC026120602-6F2B Page 3 of 25 1. VERIFICATION OF COMPLIANCE Applicant: NantCare LLC Applicant Address: 2929 N. 44th Street, Suite 110 Phoenix, AZ 85018 Manufacturer: Shenzhen Jian Lang Technology Co., Ltd Manufacturer Address: 202,2F,Block 1,Nanyou Tian'an Industry Town SZ.R.P.C Product Description: HPod Brand Name: NantLife Model Name: HPod4.0 FCC ID: OXJHPOD40 IC 10549A-HPOD40 Report Number: AGC026120602-6F2B Date of Test: Aug.20,2012 to Aug.27,2012 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.249. Tested By : Huang Wall Sep.13, 2012 Review By : Forrest Lei Sep.13, 2012 Approved By: Solger Zhang Sep.13, 2012 Report No.: AGC026120602-6F2B Page 4 of 25 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION FOR EQUIPMENT UNDER T…

Text truncated - open the document above for the full version.

PHOTOGRAPHS OF THE TEST SETUP RADIATED SPURIOUS EMISSION