P45TD2020B24GTToy RC Phantom Destroyer 1 16

FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD

Click to zoom

Application Details

Equipment Class: DXX - Part 15 Low Power Communication Device Transmitter
Date of Grant: Nov 09, 2020
Application Purpose: Original Equipment
Date of Application: Nov 09, 2020
Equipment Note: Toy RC Phantom Destroyer 1 16
Frequency Range: 2405.00000000 - 2475.00000000
Company: FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

If the car does not drive straight, use the Wheel Alignment dial PHANTOM DESTROYER / RUGGED RUNNER / THUNDER THRASHER OPERATING INSTRUCTIONS The truck requires 4 "AA" 1.5V batteries (not included). The controller requires one 9V battery (not included). When changing batteries, adult supervision is required. Use alkaline batteries for the best performance. Locate the battery door on the bottom of the truck. Pull the latch on the door and lift up to access the battery compartment. Insert 4 “AA” batteries while observing the correct polarity. Replace the battery compartment door. Slide the battery door on the back of the controller down to open. Insert one 9V battery while observing the correct polarity. Replace the battery compartment door. iiiiii Switch both car and remote buttons to “ON” position. For best result use the car on hard surfaces such as wood or tile. iiiiii Carefully remove items from package. Left Turn Right Turn Wheel Alignment 6+ Battery Cover On/O Switch On/O Switch Led Power Indicator The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displaced, published or used for any purpose without prior written permission. Altering, removing or reproducing any of the trademark or copyright notices on this package is not permitted. Distributed by and ©2019 MerchSource, LLC. Irvine, CA 92618. All rights reserved. PRINTED IN CHINA • Do not operate during thunderstorms or rain. • Avoid water, sand and snow when operating car. • Do not submerge truck or controller in water. • Never operate your truck on the street or highway. • Never operate your truck in a confined or crowded area, and do not use people or animals as obstacles. • Do not run your truck into furniture, objects or hard surface, as this will cause damage to both the objects and your car. • Keep fingers, hair and loose clothing away from the tires. gears and motor while the car is switched to “ON”. • Do not leave truck or remote control near source of heat or under direct sunlight for long periods of time. • Do not leave truck or remote control outside overnight. Dampness is harmful to interior components • Remove all batteries when not in use to avoid accidental operation • Adult supervision is recommended when operating this car. Due to continuous product improvements, the pictures on this manual may dier slightly from the actual product. SAFETY PRECAUTIONS 1-800-374-2744 FOR TECHNICAL SUPPORT, PLEASE CALL Screw This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. BATTERY WARNING: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. • Insert batteries using the correct polarity. Do not short-circuit the supply terminal. • Remove batteries when not in use. Recycle or dispose of exhausted batteries according to federal, state, and local laws. Do not dispose of batteries in a fire - they may leak or explode. • Only use manufacture specified battery(ies), charger(s) and/or adapter, if applicable, specified by the manufacturer. • Always use, replace, and recharge (if applicable) batteries under adult supervision. • Keep these instructions for future reference. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Forward Reverse

Cover Letter(s)

SCS-F018: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] W ebsite: https://www.cps.bureauveritas.com/ Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 Updated References and Contact info 6.0 7.0 Aug-30-202 SCS-F018: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 7.0 FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD 2020.11.5 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: P45TD2020B24GT Product Description: Toy RC Phantom Destroyer 1 16 Model: TD2020B, 1012788, 1013590 Sincerely, Client’s signature Client’s name / title : Kelvin Ou/Manager Contact information / address Trangulation Point Shenqiao Town, Zhaoan County, Zhangzhou City, Fujian Province P.R .China

Cover Letter(s)

SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] W ebsite: https://www.cps.bureauveritas.com/ Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 Updated References and Contact Info 6.0 7.0 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0 FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD 2020.11.5 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc: Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: P45TD2020B24GT Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagram Short Term External Photos Short Term Permanent i Internal Photos Short Term Permanent Operational Description/ Theory of Operation Short Term Permanent Parts List Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent i User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Kelvin Ou/Manager Contact information / address : Trangulation Point Shenqiao Town, Zhaoan County, Zhangzhou City, Fujian Province P.R .China i Permanent confidentiality may be requested in accordance with FCC KDB 72692

Cover Letter(s)

FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD Declaration of Identical Product Hereby, Name of manufacturer: FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD Address: Trangulation Point Shenqiao Town, Zhaoan County, Zhangzhou City, Fujian Province P.R .China City: Shantou Country: China declares that: Product description: Toy RC Phantom Destroyer 1 16 Type designation(s): 1012788, 1013590 Trademark: Sharper Image Family name is technically identical to: Product description: Toy RC Phantom Destroyer 1 16 Type designation: TD2020B Trademark: Sharper Image Certificate number (if applicable) They are identical with the test model TD2020B except the model name and appearance for trading purpose. Date: 2020.11.5 City: Shantou Name: Kelvin Ou Signature

External Photos

ID Label/Location Info

FCCIDLabelTX SIZE:35mmW*12mmH FCC ID: P45TD20 20B24GT This device compl ies with Part 15 of the F CC Rules. Operation is subje ct to the following two conditions ： (1)this device may not cause harmful inte rference, and (2)this device mus t accept any interferenc e received. including interfere nce that may cause und esired operation.

Internal Photos

Test Report

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 26 Report Version 1 Test Report No.: RF200715N020 TEST REPORT Applicant: FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD Address: Trangulation Point Shenqiao Town, Zhaoan County, Zhangzhou City, Fujian Province P.R .China Manufacturer or Supplier FUJIAN TEAMDA PHOTOELECTRICITY CO., LTD Address Trangulation Point Shenqiao Town, Zhaoan County, Zhangzhou City, Fujian Province P.R .China Product: Toy RC Phantom Destroyer 1 16 Brand Name: Sharper Image Model: TD2020B Additional Model & Model Difference 1012788, 1013590; see items 3.1 Date of tests: Jul. 15, 2020 ~ Jul. 31, 2020 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.249 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Ryan Lu Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Nov. 05, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 26 Report Version 1 Test Report No.: RF200715N020 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS .................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 5 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 8 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 8 4. TEST TYPES AND RESULTS ........................................................................................................ 9 4.1 RADIATED EMISSION MEASUREMENT ................................................................................... 9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ...................................................... 9 4.1.2 TEST INSTRUMENTS ..................................................................................................... 10 4.1.3 TEST PROCEDURES ...................................................................................................... 11 4.1.4 DEVIATION FROM TEST STANDARD ............................................................................ 11 4.1.5 TEST SETUP ................................................................................................................... 12 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 13 4.1.7 TEST RESULTS .............................................................................................................. 14 4.2 20dB BANDWIDTH MEASUREMENT ...................................................................................... 21 4.2.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT ........................................................... 21 4.2.2 TEST INSTRUMENTS ...................................................................................................... 21 4.2.3 TEST PROCEDURE ......................................................................................................... 22 4.2.4 DEVIATION FROM TEST STANDARD ............................................................................. 22 4.2.5 TEST SETUP .................................................................................................................... 22 4.2.6 EUT OPERATING CONDITIONS ..................................................................................... 22 4.2.7 TEST RESULTS ..........................…

Text truncated - open the document above for the full version.

Test Setup Photos