P5W-8609K004PASSIVE TAG TRANSMITTER FEIG 125 KHz; INTOUCH DATA COLLECTIVE DEVICE

Instructions for installing and maintaining the Kronos InTouch TM data collection device. Kronos InTouch ™ Installation Guide Document Revision: A The information in this document is subject to change without notice and should not be construed as a commitment by Kronos Incorporated. Kronos Incorporated assumes no responsibility for any errors that may appear in this manual. This document or any part thereof may not be reproduced in any form without the written permission of Kronos Incorporated. All rights reserved. Copyright 2011. Altitude, Altitude Dream, Cambridge Clock, CardSaver, Datakeeper, Datakeeper Central, eForce, Gatekeeper, Gatekeeper Central, Imagekeeper, Jobkeeper Central, Keep.Trac, Kronos, Kronos Touch ID, the Kronos logo, My Genies, PeoplePlanner, PeoplePlanner & Design, Schedule Manager & Design, ShiftLogic, ShopTrac, ShopTrac Pro, StarComm, StarPort, StarSaver, StarTimer, TeleTime, Timekeeper, Timekeeper Central, TimeMaker, Unicru, Visionware, Workforce Accruals, Workforce Central, Workforce Decisions, Workforce Express, Workforce Genie, and Workforce TeleTime are registered trademarks of Kronos Incorporated or a related company. Altitude MPP, Altitude MPPXpress, Altitude Pairing, Altitude PBS, Comm.Mgr, CommLink, DKC/Datalink, eDiagnostics, Experts at Improving the Performance of People and Business, FasTrack, Hireport, HR and Payroll Answerforce, HyperFind, Kronos 4500 Touch ID, Kronos 4500, Kronos 4510, Kronos Acquisition, Kronos e-Central, Kronos KnowledgePass, Kronos TechKnowledgy, KronosWorks, KVC OnDemand, Labor Plus, Momentum Essentials, Momentum Online, Momentum, MPPXpress, Overall Labor Effectiveness, Schedule Assistant, Smart Scheduler, Smart View, Start Quality, Start WIP, Starter Series, StartLabor, Timekeeper Decisions, Timekeeper Web, VisionPlus, Winstar Elite, WIP Plus, Workforce Absence Manager, Workforce Acquisition, Workforce Activities, Workforce Analytics, Workforce Attendance, Workforce Central Portal, Workforce Connect, Workforce Employee, Workforce ESP, Workforce Forecast Manager, Workforce HR, Workforce Leave, Workforce Manager, Workforce MobileTime, Workforce Operations Planner, Workforce Payroll, Workforce Record Manager, Workforce Recruiter, Workforce Scheduler, Workforce Smart Scheduler, Workforce Tax Filing, Workforce Timekeeper, Workforce View, and Workforce Worksheet are trademarks of Kronos Incorporated or a related company. The source code for Equinox is available for free download at www.eclipse.org. All other trademarks or registered trademarks used herein are the property of their respective owners and are used for identification purposes only. When using and applying the information generated by Kronos products, customers should ensure that they comply with the applicable requirements of federal and state law, such as the Fair Labor Standards Act. Nothing in this Guide shall be construed as an assurance or guaranty that Kronos products comply with any such laws. FCC Compliance - After testing, this equipment complies with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, it can cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user, and not Kronos Incorporated, is required to correct the interference. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and television reception. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; or consult the dealer or an experienced radio/TV technician for help. You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402. FCC Notice (for U.S. Customers) - This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules. Canadian DOC Compliance - This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numerique respecte les limites de rayonnement de bruits radio electriques applicables aux appareils numeriques de classe A, prevues au Reglement sur le materiel brouilleur du ministere des Communications du Canada. Ce dispositif est conforme à la norme d'Industrie Canada exempts de licence RSS (s). L'opération est soumise aux deux condi…

Text truncated - open the document above for the full version.

P5W-8609K004, Kronos part numbers: 8609000-004 and 8609000-054 External Photos: Front Rear:

Product Label FCC Label

FCC label FCC ID:P5W‐8609K004 IC:1416A‐8609K004 would be used with part numbers: 8609000‐004, 8609000‐054 (Feig 125 KHz reader)

P5W-8609K004, Kronos part numbers: 8609000-004 and 8609000-054 Internal Photos:

Test Number: 316-11 Issue Date: 08/02/2011 Page 20 of 21 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com 7. Measurement Data (continued) 7.10. Public Exposure to Radio Frequency Energy Levels ((47 CFR 1.1307(b) RSS-GEN 5.6, RSS 102 Power Density Channel MPE Distance (cm) DUT Peak Output Power (dBm) DUT Antenna Gain (dBi) (mW/cm2) (W/m2) Limit (mW/cm2) Result (1) (2) (3) (4) (5) N/A 20.0 -27.27 1.0 0.0000005 0.0000047 1 Compliant • PD = Power Density (mW/cm 2 ) • OP = DUT Peak Output Power (dBm) • AG = DUT Antenna Gain (dBi) • d = MPE Distance (cm) 1. Reference CFR 2.1093(b): For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. 2. Section 7.5, table column 3 of this test report. Converted to peak output power. 3. Data supplied by the client. Antenna specification data of worst case antenna used by the DUT. 4. Power density is calculated from field strength measurement and antenna gain. 5. Reference CFR 1.1310, Table 1: Limits for Maximum Permissible Exposure (MPE), Section (B): Limits for General Population/Uncontrolled Exposure. OP + AG (4 x π x d²) PD =

Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 COMPLIANCE WORLDWIDE INC. TEST REPORT 316-11 In Accordance with the Requirements of FCC PART 15.209 INDUSTRY CANADA RSS 210, ISSUE 8, Annex 8 License-exempt Radio Apparatus (All Frequency Bands): Category I Issued to Kronos, Incorporated 4 Omni Way Chelmsford, MA. 01824 for the In Touch 9000 FEIG Electronic Module FCC ID: P5W-8609K004 IC: 1416A-8609K004 Report Issued on August 10, 2011 Tested by This test report shall not be reproduced, except in full, without written permission from Compliance Worldwide, Inc. (603) 887 3903 Fax 887 6445 http://www.complianceworldwide.com Test Number: 316-11 Issue Date: 08/02/2011 Page 2 of 21 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Table of Contents 1. Scope ......................................................................................................................................... 3 2. Product Details ........................................................................................................................... 3 2.1. Manufacturer ..................................................................................................................... 3 2.2. Model Number ................................................................................................................... 3 2.3. Serial Number.................................................................................................................... 3 2.4. Description of EUT ............................................................................................................ 3 2.5. Power Source .................................................................................................................... 3 2.6. EMC Modifications............................................................................................................. 3 3. Product Configuration................................................................................................................. 3 3.1. Operational Characteristics & Software............................................................................. 3 3.2. EUT Cables/Transducers .................................................................................................. 3 3.3. Support Equipment............................................................................................................ 3 3.4. Block Diagram ................................................................................................................... 4 4. Measurements Parameters ........................................................................................................ 4 4.1. Measurement Equipment Used to Perform Test ............................................................... 4 4.2. Measurement & Equipment Setup..................................................................................... 4 4.3. Test Procedure .................................................................................................................. 5 5. Choice of Equipment for Test Suites ..........................................................................................5 5.1. Choice of Model................................................................................................................. 5 5.2. Presentation ...................................................................................................................... 5 5.3. Choice of Operating Frequencies ..................................................................................... 5 6. Measurement Summary ............................................................................................................. 6 7. Measurement Data ..................................................................................................................... 7 7.1. Antenna Requirement........................................................................................................7 7.2. Minimum 26 dB Bandwidth................................................................................................ 7 7.3. 99% Bandwidth.................................................................................................................. 8 7.4. Transmitter Frequency Stability ......................................................................................... 9 7.5. Transmitter Field Strength / Output Power ...................................................................... 12 7.6. AC Power-line Conducted Emissions .............................................................................. 13 7.7. Transmitter Radiated (Spurious) Emissions .................................................................... 15 7.8. Radiated (Harmonic) Emissions ...................................................................................... 17 7.9. Receiver Spurious Emissions .......................................................................................... 18 7.10. Public Exposure to Radio Frequency Energy Levels .................................................... 20 8. Test Site Description ................................................................................................................ 21 Test Number: 316-11 Issue Date: 08/02/2011 Page 3 of 21 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com 1. Scope This test report certifies that the In Touch 9000 FEIG Electronic Module, as tested, meet the FCC Part 15.209, and Industry Canada RSS 210 requirements. The scope of this test report is limited to the test samples provided by the client, only in as much as those samples represent other production units. If any significant changes are made to the units, the changes shall be evaluated and a retest may be required. 2. Product Details 2.1. Manufacturer: Kronos, Incorporated 2.2. Model Number: FEIG Tested 8609000-X…

Text truncated - open the document above for the full version.

P5W-8609K004, Kronos part numbers: 8609000-004 and 8609000-054 Test Set up Photos: Radiated Front - Radiated Rear - Biconilog Radiated Rear – Loop Conducted Front: Conducted Rear: