P65ALR9890RRNon-multilateration ALR 9890 RFID Reader

ALIEN TECHNOLOGY ® HARDWARE SETUP GUIDE ALR-9890 - RR Aug 2006 ALR-9890 - RR Legal Notices Copyright ©2006 Alien Technology Corporation. All rights reserved. Alien Technology Corporation has intellectual property rights relating to technology embodied in the products described in this document, including without limitation certain patents or patent pending applications in the U.S. or other countries. This document and the products to which it pertains are distributed under licenses restricting their use, copying, distribution and decompilation. No part of this product documentation may be reproduced in any form or by any means without the prior written consent of Alien Technology Corporation and its licensors, if any. Third party software is copyrighted and licensed from Licensors. Alien, Alien Technology, the Alien logo, Nanoblock, FSA, Gen2Ready, Squiggle, the Squiggle logo, Nanoscanner and other graphics, logos, and service names used in this document are trademarks of Alien Technology Corporation in the U.S. and other countries. All other trademarks are the property of their respective owners. U.S. Government approval required when exporting the product described in this documentation. Federal Acquisitions: Commercial Software -- Government Users Subject to Standard License Terms and Conditions. U.S. Government: If this Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in the Software and accompanying documentation shall be only as set forth in this license; this is in accordance with 48 C.F.R. 227.7201 through 227.7202-4 (for Department of Defense (DoD) acquisitions) and with 48 C.F.R. 2.101 and 12.212 (for non- DoD acquisitions). DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARANTEES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGMENT ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. FCC Compliance (RF Devices) This equipment has been tested and found to comply with Part 90 of the FCC Rules and Regulations. A separate site license is required for each installation. It is the responsibility of the system integrator/installer or user to obtain the site license. FCC Compliance (Digital Devices) This equipment had been tested and found to comply with the limits of Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense. Any change or modification to this product voids the user authority to operate per FCC Part 15 Subpart A. Section 15.21 regulations. Caution The ALR 9890 – RR is a source of RF energy. When connected to a system including an antenna the radiated RF emissions must be evaluated in accordance with FCC OET Bulletin 56 “Hazards of radio frequency and electromagnetic fields” and Bulletin 65 “Human exposure to radio frequency electromagnetic fields” and appropriate precautions implemented. All individuals working on or near the antenna should not be closer than 1.71 feet (52 CM) to the antenna when the RFID reader is operating into a 10 dBi antenna. This is the minimum distance for human exposure recommended by FCC OET Bulletin 56. TABLE OF CONTENTS ALR-9890 – RR HARDWARE SETUP GUIDE DOC. CONTROL #8102XXX-000 REV A i Alien Technology ® Hardware Setup Guide ALR-9890 - RR Aug 2006 Table of Contents CHAPTER 1 INTRODUCTION ..................................................................................................................... 1 Audience ....................................................................................................................................................... 1 RFID Reader Overview ................................................................................................................................. 1 UHF RFID Tags ............................................................................................................................................2 Requirements ................................................................................................................................................ 2 Specifications ................................................................................................................................................ 3 RFID Reader........................................................................................................................................... 3 Mechanical: Reader Physical Size ........................................................................................................ 4 RS-232 Port Pinouts ............................................................................................................................... 5 RS-232 Connector (Female) – Looking at Reader .......................................................................... 5 IO Port Terminal Interface ...................................................................................................................... 5 I/O Port Screw Terminal (Female) – Looking at Reader.................................................................. 6 System Architecture ............................................................................................................................... 6 CHAPTER 2 READER HARDWARE INSTALLATION AND OPERATION ................................................ 7 Receiving the R…

Text truncated - open the document above for the full version.

External Photos ALR-9890-RR External View I/O Side External View Antenna Side External Photos ALR-9890-RR, continued... Close up of LED indicators

Frequency Range: 910.75 - 920.75 MHz FCC ID: P65ALR9890RR FCC Part 90 Location and Monitoring Service Non-Multiliteration. Site license is required for the use of this product. Phone: 866-RFID-NOW www.alientechnology.com Alien Technology AAR S-918 Enterprise Scalable RFID Reader 0400166-001 08/21/06 A/W, PRODUCT LABEL, ALR-9890-RR 1 4 3 5 2 Pin1,2: Common Pin3:+9.75 V Pin4:+5.75 V Pin5:-5.75 V MODEL: ALR-9890-RR US C

Internal Photos ALR-9890-RR RF Internal Top, With Digital Assembly Internal Photos ALR-9890-RR, continued... RF Internal Top, With Daughter PCA NOT Installed RF Internal Bottom, With Daughter PCA NOT Installed Internal Photos ALR-9890-RR, continued... Digital Internal Top Digital Internal Bottom View Display LED PCA

MPE Exposure Formula: S = ( P X G ) / ( 4 X π X d^2 ) where: S = power density P = transmitter conducted power in (mW) G = antenna numeric gain d = distance to radiation center (m) or (.02^2 ) = .020 m 910.75 MHz Gain =10.0NumericEUT ant.:10dBi Power = 1995mWEUT power:33dBm Frequency =910.75MHzMPE limit:0.607 mW/cm^2 Cable Loss =0dB EIRP =19952.62mW19952.62mW R (cm) = S (20cm) = 915.75 MHz Gain =10.0NumericEUT ant.:10dBi Power = 1995mWEUT power:33dBm Frequency =915.75MHzMPE limit:0.611 mW/cm^2 Cable Loss =0dB EIRP =19952.62mW19952.62mW R (cm) = S (20cm) = 920.75 MHz Gain =10.0NumericEUT ant.:10dBi Power = 1995mWEUT power:33dBm Frequency =920.75MHzMPE limit:0.614 mW/cm^2 Cable Loss =0dB EIRP =19952.62mW19952.62mW R (cm) = S (20cm) = Enter Data in Linear Units 3.96951.1376902 Enter Data in Linear Units 50.99789313.969 Enter Data in Linear Units 50.85923623.969

File: R65316 Rev 1 Page 1 of 20 2016-01 Electromagnetic Emissions Test Report In Accordance With Industry Canada Radio Standards Specification 119 Issue 6, FCC Part 90 on the Alien Technology Transmitter Model: ALR 9890-RR FCC ID NUMBER: P65ALR9890RR GRANTEE: Alien Technology 18220 Butterfield Blvd. Morgan Hill, CA 95037 TEST SITE: Elliott Laboratories, Inc. 684 W. Maude Avenue Sunnyvale, CA 94086 REPORT DATE: September 12, 2006 FINAL TEST DATE: August 1, August 15, August 28 and August 30, 2006 AUTHORIZED SIGNATORY: ______________________________ Juan Martinez Senior EMC Engineer Elliott Laboratories, Inc. is accredited by the A2LA, certificate number 2016-01, to perform the test(s) listed in this report. This report shall not be reproduced, except in its entirety, without the written approval of Elliott Laboratories, Inc. Elliott Laboratories, Inc. -- EMC Department Test Report Report Date: September 12, 2006 File: R65316 Rev 1 Page 2 of 20 pages REVISION HISTORY Revision # Date Comments Modified By 1 September 21, 2006 Initial Release David Guidotti Elliott Laboratories, Inc. -- EMC Department Test Report Report Date: September 12, 2006 File: R65316 Rev 1 Page 3 of 20 pages TABLE OF CONTENTS COVER PAGE............................................................................................................................................................. 1 REVISION HISTORY ..............................................................................................................................................2 TABLE OF CONTENTS ..........................................................................................................................................3 FCC CERTIFICATION INFORMATION .............................................................................................................5 DECLARATIONS OF COMPLIANCE ..................................................................................................................7 SCOPE........................................................................................................................................................................8 OBJECTIVE ..............................................................................................................................................................8 SUMMARY OF TEST RESULTS ...........................................................................................................................9 PART 90 AND RSS-119 TEST SUMMARY.............................................................................................................9 MEASUREMENT UNCERTAINTIES .................................................................................................................10 EQUIPMENT UNDER TEST (EUT) DETAILS ..................................................................................................11 GENERAL............................................................................................................................................................11 EUT ANTENNA DETAILS ................................................................................................................................11 ENCLOSURE .......................................................................................................................................................11 MODIFICATIONS ...............................................................................................................................................11 SUPPORT EQUIPMENT.....................................................................................................................................12 EUT INTERFACE PORTS ..................................................................................................................................12 EUT OPERATION DURING TESTING .............................................................................................................12 TEST SITE ...............................................................................................................................................................13 GENERAL INFORMATION ...............................................................................................................................13 CONDUCTED EMISSIONS CONSIDERATIONS.............................................................................................13 RADIATED EMISSIONS CONSIDERATIONS.................................................................................................13 MEASUREMENT INSTRUMENTATION ..........................................................................................................14 RECEIVER SYSTEM ..........................................................................................................................................14 INSTRUMENT CONTROL COMPUTER ..........................................................................................................14 PEAK POWER METER ......................................................................................................................................14 FILTERS/ATTENUATORS.................................................................................................................................14 ANTENNAS .........................................................................................................................................................15 ANTENNA MAST AND EQUIPMENT TURNTABLE .....................................................................................15 INSTRUMENT CALIBRATION.........................................................................................................................15 TEST PROCEDURES.............................................................................................................................................16 SPECIFICATION LIMITS AND SAMPLE CALCULATIONS .................................................…

Text truncated - open the document above for the full version.