P9I-WGPPTR58EAS System

58Khz Premier Guard TM Installation Manual Version: Jan 2006 Manual Part Number: WG-PGTR58-IM (011306A) WG SECURITY PRODUCTS INC. 3031 Tisch Way, Suite 602, San Jose, CA 95128 (USA) http://www.wgspi.com Technical Support Contact Information North America South America Tel: 818-763-9186 Fax: 818-255-0514 Email: [email protected] Rest of World Tel: 408-241-8000 Fax: 408-241-8082 Email: [email protected] WARRANTY DISCLAIMER WG Security Products Inc. makes no representation or warranty with respect to the contents hereof and specifically disclaims any implied warranties o f merchantability or fitness for any particular purpose. Further, WG Security Products Inc. reserves the right to revise this publication and make changes from time to time in the content hereof without obligation of WG Security Products Inc. to notify any person of such revision or changes. CRITICAL NOTE As specified by FCC Regulations 15.21, any changes or modifications not expressly approved by the party responsible for compliance of this equipment, will void the user’s permission and authority to operate this equipment. FCC ID: P9I-WGPPTR58 “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.” TABLE OF CONTENTS OVERVIEW .............................................................................................................................1 SYSTEM OVERVIEW................................................................................................................1 SYSTEM CONFIGURATION.......................................................................................................2 PREMIER GUARD FEATURES & BENEFITS.................................................................................2 SPECIFICATIONS....................................................................................................................3 PRE-INSTALLATION INFORMATION ....................................................................................4 PREMIER LINE CONTROL UNIT (PLCU) DIMENSIONS................................................................4 PREMIER GUARD PEDESTAL DIMENSIONS................................................................................5 P REMIER G UARD B ASE F OOTPRINT D IMENSIONS ......................................................................6 CONNECTION DIAGRAM..........................................................................................................7 INSTALLATION.......................................................................................................................8 INSTALLATION SITE POWER SUPPLY VERIFICATION...................................................................8 PARTS LIST –PREMIER GUARD SYSTEM...................................................................................8 QUICK START FOR SYSTEM CONNECTIONS..............................................................................9 Transformer Box............................................................................................................10 Installing the PLCU........................................................................................................11 Connecting the Pedestal ...............................................................................................12 CABLE AND CONNECTOR CONNECTIONS................................................................................14 POWER CORD NOTICES........................................................................................................18 North American Power Supply Cords ............................................................................18 International Power Supply Cord ...................................................................................18 EXTERNAL RELAY INTERFACE...............................................................................................19 FUSE REPLACEMENT INFORMATION.......................................................................................20 IR REMOTE CONTROL KEYPAD DESCRIPTION ...............................................................23 TUNING PROCEDURES & TIPS...........................................................................................24 REMOTE CONTROL PROGRAMMING ................................................................................25 ADDENDUM 1 .......................................................................................................................33 PEDESTAL SENSITIVITY ADJUSTMENT GUIDE..........................................................................33 Premier Guard Installation Manual 1 OVERVIEW System Overview Premier Guard systems consist of one a transceiver pedestal, a 58Khz Premier Line Control Unit (WGPLCU58), and a stepdown power transformer box. The PLCU provides all the control functions for the transceiver, including tag detection and alarm notification. Detection Range (either side of pedestal) Europe USA Micro Pencil Tag 0.9 m 3 ft Premier Line Control Unit WGPLCU58 24vac Stepdown Transformer WGPS2490-1 Transceiver Antenna (Pedestal) Premier Guard Installation Manual 2 System Configuration The PLCU controls the transceiver through the TX control cable. All detection information is received through the RX cable. The Transformer power box powers the PLCU and transceiver through two separate cables. The following diagram illustrates the connections. Premier Guard Features & Benefits • Digital Signal Processing The Premier Guard applies the latest and most advanced DSP technology for anti- theft solutions, virtually eliminating false alarms while maintaining considerable detection range. • Self Tuning Electronics Benefiting from its fully digital electronics, the Premier Guard constantly evaluates the environment, automatically adapting t…

Text truncated - open the document above for the full version.

58Khz Premier Pro TM Installation Manual Version: January 2006 Manual Part Number: WG-PPTR58-IM (010606A) WG SECURITY PRODUCTS INC. 3031 Tisch Way, Suite 602, San Jose, CA 95128 (USA) http://www.wgspi.com TECHNICAL SUPPORT CONTACT INFORMATION North America South America Tel: 818-763-9186 Fax: 818-255-0514 Email: [email protected] Rest of World Tel: 408-241-8000 Fax: 408-241-8082 Email: [email protected] WARRANTY DISCLAIMER WG Security Products Inc. makes no representation or warranty with respect to the contents hereof and specifically disclaims any implied warranties o f merchantability or fitness for any particular purpose. Further, WG Security Products Inc. reserves the right to revise this publication and make changes from time to time in the content hereof without obligation of WG Security Products Inc. to notify any person of such revision or changes. CRITICAL NOTE As specified by FCC Regulations 15.21, any changes or modifications not expressly approved by the party responsible for compliance of this equipment, will void the user’s permission and authority to operate this equipment. FCC ID: P9I-WGPPTR58 "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation." TABLE OF CONTENTS OVERVIEW .............................................................................................................................1 SYSTEM OVERVIEW................................................................................................................1 SYSTEM CONFIGURATION.......................................................................................................2 PREMIER PRO FEATURES & BENEFITS.....................................................................................2 SPECIFICATIONS....................................................................................................................3 PRE-INSTALLATION INFORMATION ....................................................................................4 PREMIER LINE CONTROL UNIT (PLCU) DIMENSIONS................................................................4 PREMIER PRO PEDESTAL DIMENSIONS....................................................................................5 P REMIER P RO B ASE F OOTPRINT D IMENSIONS ..........................................................................6 CONNECTION DIAGRAM..........................................................................................................7 INSTALLATION.......................................................................................................................8 INSTALLATION SITE POWER SUPPLY VERIFICATION...................................................................8 PARTS LIST –PREMIER PRO SYSTEM.......................................................................................8 QUICK START FOR SYSTEM CONNECTIONS..............................................................................9 Transformer Box............................................................................................................10 Installing the PLCU........................................................................................................11 Connecting the Pedestal ...............................................................................................12 CABLE AND CONNECTOR CONNECTIONS................................................................................14 EXTERNAL RELAY INTERFACE...............................................................................................18 FUSE REPLACEMENT INFORMATION.......................................................................................19 IR REMOTE CONTROL KEYPAD DESCRIPTION ...............................................................22 TUNING PROCEDURES & TIPS...........................................................................................23 REMOTE CONTROL PROGRAMMING ................................................................................24 ADDENDUM 1 .......................................................................................................................32 PEDESTAL SENSITIVITY ADJUSTMENT GUIDE..........................................................................32 Premier Pro Installation Manual 1 OVERVIEW System Overview Premier Pro systems consist of one a transceiver pedestal, a 58Khz Premier Line Control Unit (WGPLCU58), and a stepdown power transformer box. The PLCU provides all the control functions for the transceiver, including tag detection and alarm notification. Detection Range (Either side of pedestal) Europe USA Micro Pencil Tag 1.4 m 4.5 ft Premier Line Control Unit WGPLCU58 24vac Stepdown Transformer WGPS2490-1 Transceiver Antenna (Pedestal) Premier Pro Installation Manual 2 System Configuration The PLCU controls the transceiver through the TX control cable. All detection information is received through the RX cable. The Transformer power box powers the PLCU and transceiver through two separate cables. The following diagram illustrates the connections. Premier Pro Features & Benefits • Digital Signal Processing The Premier Pro applies the latest and most advanced DSP technology for anti-theft solutions, virtually eliminating false alarms while maintaining considerable detection range. • Self Tuning Electronics Benefiting from its fully digital electronics, the Premier Pro constantly evaluates the environment, automatically adapting to changes in the environment to enhance its performance. • Integrated Audible and Visual Notification Alarm notification is built into the Premier Pro on both the pedestal and controller. Connections Legend Power Bus TX Control Signal RX Signal Premier Pro Transceiver Antenna 24vac 24vac Transforme r PLCU 110/220vac 24vac Premier Pro Installation Manual 3 …

Text truncated - open the document above for the full version.

April 7 2006 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen: In reference to the application under FCC ID: P9I-WGPPTR58 and pursuant to Sections 0.457(d) (l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematics Block Diagrams Theory of Operation . These documents contain detailed system and equipment description and related information about the product that WG Security Products, Inc. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, WG Security Products, Inc. considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Regards, Graham Handyside Vice president Global Operations WG 3031 Tisch Way Suite 602 San Jose CA 95128 USA. Phone: 408 241 8000 Fax: 408 241 8082 [email protected]

June 22, 2007 Compliance Certification Services 47173 Benicia Street Fremont, CA 94538 Attn: Certification Department As requested, here are the differences between the following products. Premier Guard Premier Pro Mono Plus 1. All three systems use the same circuit boards. 2. All three systems use the same external 24vac power transformer unit. 3. All three systems use the same external PLCU (controller unit). 4. Premier Guard and Premier Pro housings are made of the same Plexiglas type material. 5. The Premier Pro is a wider unit so that it can house a larger antenna for greater tag detection range (approximately 4.5 feet on either side of the pedestal). I trust this satisfactorily answers your questions. If not, please feel free to call me directly. Sincerely, Mac Copas CCTV Sales Manager WG Security Products Inc., 3031 Tisch Way, Suite 602, San Jose, CA 95128 • Tel: 408-241-8000 • Fax: 408-241-8082 • wgspi.com

PROPOSED FCC ID LABEL AND LOCATION WG SECURITY PRODUCT INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P9I-WGPPTR58 FCC ID LABEL Bottom of EUT

FCC CFR47 PART 15 SUBPART C ATTESTATION TEST REPORT FOR EAS SYSTEM MODEL NUMBER: WGPPTR58-1 FCC ID: P9I-WGPPTR58 REPORT NUMBER: 05U3485-12, Revision B ISSUE DATE: July 5, 2007 Prepared for WG SECURITY PRODUCTS, INC 3031 TISCH WAY, STE 602 SAN JOSE, CA 95128 U.S.A. Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, MORGAN HILL, CA 95037, USA TEL: (408) 463-0885, FAX: (408) 463-0888 REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 2 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By A 10/03/05 Initial Issue Thu Chan B 07/05/07 Minor changes per TCB Review. S. Radecki REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 3 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS............................................................................................. 4 2. TEST METHODOLOGY .................................................................................................................. 5 3. FACILITIES AND ACCREDITATION .......................................................................................... 5 4. CALIBRATION AND UNCERTAINTY.......................................................................................... 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 4.2. MEASUREMENT UNCERTAINTY ............................................................................................... 5 5. EQUIPMENT UNDER TEST............................................................................................................6 5.1. DESCRIPTION OF EUT ..............................................................................................................6 5.2. TEST CONFIGURATION .............................................................................................................6 5.3. MODE(S) OF OPERATION ......................................................................................................... 6 5.4. SOFTWARE AND FIRMWARE .................................................................................................... 7 5.5. MODIFICATIONS ........................................................................................................................ 7 5.6. DETAILS OF TESTED SYSTEM .................................................................................................. 7 6. TEST AND MEASUREMENT EQUIPMENT ................................................................................ 9 7. APPLICABLE LIMITS AND TEST RESULTS ........................................................................... 10 7.1. RADIATED EMISSIONS.............................................................................................................10 7.2. AC MAINS LINE CONDUCTED EMISSIONS ........................................................................... 16 8. SETUP PHOTOS .............................................................................................................................. 20 REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 4 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: WG SECURITY PRODUCTS, INC. 3031 TISCH WAY, STE 602 SAN JOSE, CA 95128 U.S.A. EUT DESCRIPTION: EAS System MODEL: WGPPTR58-1 SERIAL NUMBER (TRANSFORMER): CS 01545 SERIAL NUMBER (CONTROLLER): CS 01546 SERIAL NUMBER (ANTENNA): CS 01548 DATE TESTED: JUNE 21, 2005 SEPTEMBER 13 - 20, 2005 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART C NO NON-COMPLIANCE NOTED Compliance Certification Services, Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. No part of this report may be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any government agency. Approved & Released For CCS By: Tested By: THU CHAN FRANK IBRAHIM EMC SUPERVISOR EMC ENGINEER COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 5 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4-2003. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 561F Monterey Road, Morgan Hill, California, USA. The sites are constructed in conformance with the requirements of…

Text truncated - open the document above for the full version.

REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 20 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. 8. SETUP PHOTOS RADIATED EMISSION (30-1000 MHz) RADIATED EMISSIONS (FRONT) REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 21 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED EMISSIONS (BACK) REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 22 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. AC MAINS LINE CONDUCTED EMISSION (0.15-30 MHz) LINE CONDUCTED EMISSION (FRONT) REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 23 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. LINE CONDUCTED EMISSION (BACK) REPORT NO: 05U3485-12B DATE: JULY 5, 2007 EUT: EAS SYSTEM FCC ID: P9I-WGPPTR58 Page 24 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED EMISSIONS (0.009-30 MHz) END OF REPORT RADIATED EMISSIONS (0.009-30 MHz)