P9P0030211Bluetooth Access Point

Product Name : Bluetooth Access Point Model No : BT60 Features ÿ Bluetooth specification v1.1 compliant ÿ Bluetooth standard application profiles Generic Access LAN Access Serial Port Personal Area Network FAX Cordless Telephony Intercom Dial Up ÿ Ethernet accessibility with 10Mbps ÿ Operation range up to 100 meters (Class 1) ÿ LED indicators showing power on, system ready, LAN/ADSL/56K Modem connection and Bluetooth connection ÿ Web based system administration and configuration. ÿ Security features providing authorization and authentication ÿ Up to 7 users simultaneously access to Internet/ Intranet ÿ Provides three network connections (uplink) including, Ethernet connection with either DHCP assigned or fixed IP address ADSL connection via the PPP over Ethernet (PPPoE) protocol Dial-up connection made via an external 56K MODEM ÿ Dimension 140x107x30 mm (Not including the stand) Scope of Supply ÿ One piece of master unit (Bluetooth Access Point) ÿ One AC power adapter ÿ One CD with user manuals and download program ÿ LAN cable (1 meter) System Requirements for system upgrade or reading user manuals ÿ Pentium III PC or higher ÿ Windows 98/98SE/Me/2000/XP ÿ CD ROM drive Packaging ÿ 4 color gift box Country of Origin ÿ China International Standard ÿ Bluetooth V1.1, CE, FCC The Bluetooth trademarks are owned by Bluetooth SIG, Inc. USA and licensed to ATO Technology Ltd.

From: S. S. Liou Sent: Friday, January 17, 2003 12:23 AM To: Mike Kuo Subject: Re: ATO Technology Ltd., FCC ID:P9P0030211, AN02T2489 Hello Mike, For your questions, Ans. #1: Please find attached file "91r09-068-04hopping.pdf" for revised test report. The 20dB bandwidth plots and test data were revised. There is another mistake in the former test report. The data and plots of "channel bandwidth" and "separation of adjacent channel" were misplaced. This mistake is also corrected in the revised test report. Ans. #2: Please refer to attached file "PowerDensityPlots.pdf" for test plots. Ans. #3: Please refer to attached file "Exhibit-E-User_Manual(revised).pdf" for revised user manual. Ans. #4: The power can be controlled by software automatically according to the connection situation. When the connection is weak the power will be adjusted in the range of rated high and low power level. The "HI" and "LO" power data in the test report are measured with the power adjusted to highest and lowest level respectively. For conducted output power measurement, the power was adjusted to the highest level. Please contact me if there is any problem. Thank you very much! Best regards, S. S. Liou ETC ----- Original Message ----- From: "Mike Kuo" <[email protected]> To: "Will Yauo (E-mail)" ; "Willyauo (E-mail)" Sent: Wednesday, January 01, 2003 2:24 AM Subject: FW: ATO Technology Ltd., FCC ID:P9P0030211, AN02T2489 > > > -----Original Message----- > From: CERTADM > Sent: Tuesday, December 31, 2002 10:23 AM > To: '[email protected]' > Subject: ATO Technology Ltd., FCC ID:P9P0030211, AN02T2489 > > > Notice_content > ------------- > Question #1: The occupied bandwidth in section 15.247(a)(1)(ii) requires > 20dB bandwidth not 26dB bandwidth as displayed in the test report, please > provide 20dB bandwidth plots and update the test report. > > Question #2: Please provide power spectra density test plots when the > Bluetooth device is in the acquisition mode. > > Question #3: The RF Exposure warning statement does not provide adequate > information. Suggested wordings may include " Important Note: The antenna > used for this transmitter must be installed to provide a separation distance > of at least 20cm from all persons and must not be co-located or operating in > conjunction with any other antenna or transmitter. . ." > > Question #4: In the spurious radiated emission tests, two power levels were > indicated ( high and low power ). However, there is only one power level > recorded during conducted output power measurement. Please explain what is > the rated power of high power and low power and how the power level is > controlled. > > Best Regards > > Mike Kuo > The items indicated above must be submitted before processing can continue > on the above referenced application. Failure to provide the requested > information within 60 days of the original e-mail date may result in > application dismissal and forfeiture of the filing fee. Also, please note > that partial responses increase processing time and should not be submitted. > Any questions about the content of this correspondence should be directed to > the e-mail address listed below the name of the sender.

ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Front View of EUT Rear View of EUT ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Top View of EUT Bottom View of EUT ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 ONSTRUCTED PHOTOS of EUT Side View of EUT Side View of EUT ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Front View of Adaptor Rear View of Adaptor

ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT Internal View of EUT ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Internal View of EUT Component View of PCB ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Solder View of PCB Component View of PCB ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Solder View of PCB Component View of PCB ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT Solder View of PCB 18. Internal View of Adaptor PCB ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 CONSTRUCTED PHOTOS of EUT 19. Component View of Adaptor PCB 20. Solder View of Adaptor PCB

The product provides a complete 2.4GHz Bluetooth system for wireless data and voice communications. It is a multi-functional device which works as an Internet, Fax, Modem and IP Phone gateway providing the service of Internet access sharing, personal area networking, FAX, Modem dial up and IP phone. Its uplink connection includes RS232C to 56K modem, Ethernet to ADSL, and LAN. Its downlink connection is Bluetooth v1.1 supporting up to seven data service users or up to three voice service users

Rev. No 2.0 FCC Part 15 EMI TEST REPORT of E.U.T. : Bluetooth Access Point MODEL : BT60 FCC ID. : P9P0030211 for APPLICANT : ATO Technology Ltd. ADDRESS : Unit 1310-11, Grand Century Place Tower 2, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 34, LIN 5, DING FU TSUN, LINKOU HSIANG, TAIPEI HSIEN, TAIWAN, R.O.C. Tel:(02)26023052, 26023054 Fax:(02)26010910 Report Number : ET91R-09-068-04 ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.1 TEST REPORT CERTIFICATION Applicant : ATO Technology Ltd. Unit 1310-11, Grand Century Place Tower 2, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Manufacturer : Antonio Preceise Products Manufactory Ltd. Rm. 1314-16, 13/F, Block B1, Yau Tong Industrial City, 17 Ko Fai Road, Yau Tong, Kowloon, Hong Kong Description of EUT : a) Type of EUT : Bluetooth Access Point b) Trade Name : ATA c) Model No. : BT60 d) Power Supply : Adaptor Model No35A-D06-500 I/P:AC 120V 60Hz 6.5W O/P:DC 6V 500mA 3VA Regulation Applied : FCC Rules and Regulations Part 15 Subpart B & C (2001) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.4, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relates only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Dec. 15, 2002 Test Engineer : ( Ion. Lin ) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.1 Table of Contents Page 1 GENERAL INFORMATION.......................................................................................................1 1.1 Product Description........................................................................................................................1 1.2 Characteristics of Device................................................................................................................1 1.3 Test Methodology..........................................................................................................................1 1.4 Test Facility....................................................................................................................................1 2 PROVISIONS APPLICABLE.......................................................................................................2 2.1 Definition........................................................................................................................................2 2.2 Requirement for Compliance...........................................................................................................3 2.3 Restricted Bands of Operation........................................................................................................5 2.4 Labeling Requirement.....................................................................................................................5 2.5 User Information............................................................................................................................6 3. SYSTEM TEST CONFIGURATION...........................................................................................7 3.1 Justification.....................................................................................................................................7 3.2 Devices for Tested System.............................................................................................................7 4 RADIATED EMISSION MEASUREMENT..............................................................................8 4.1 Applicable Standard.......................................................................................................................8 4.2 Measurement Procedure.................................................................................................................8 4.3 Measuring Instrument...................................................................................................................10 4.4 Radiated Emission Data................................................................................................................11 4.4.1 Fundatmental and Harmonics....................................................................................................11 4.4.2 Other Emissions.......................................................................................................................17 4.5 Field Strength Calculation.............................................................................................................17 4.6 Photos of Radiation Measuring Setup............................................................................................18 5 CONDUCTED EMISSION MEASUREMENT........................................................................19 5.1 Standard Applicable.....................................................................................................................19 5.2 Measurement Procedure...............................................................................................................19 5.3 Conducted Emission Data.............................................................................................................20 5.4 Result Data Calculation.................................................................................................................23 5.5 Conducted Measurement Equipment.............................................................................................23 5.6 Photos of Conduction Measuring Setup........................................................................................24 6 ANTENNA REQUIREMENT............................................…

Text truncated - open the document above for the full version.

ETC Report No. : ET91R-09-068-04 Sheet 41 of 44 Sheets FCC ID. : P9P0030211 Rev. No 2.0 Appendix 4 : Plotted Data for Channel Bandwidth ETC Report No. : ET91R-09-068-04 Sheet 42 of 44 Sheets FCC ID. : P9P0030211 Rev. No 2.0 Appendix 5 : Plotted Data for Channel Dwell Time ETC Report No. : ET91R-09-068-04 Sheet 43 of 44 Sheets FCC ID. : P9P0030211 Rev. No 2.0 Appendix 6 : Plotted Data for Output Peak Power ETC Report No. : ET91R-09-068-04 Sheet 44 of 44 Sheets FCC ID. : P9P0030211 Rev. No 2.0 Appendix 7 : Plotted Data for 100 kHz Bandwidth from Band Edge

ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 Photos of Radiation Measuring Setup ETC Report No. : ET91R-09-068-04 FCC ID. : P9P0030211 Rev. No 2.0 Photos of Conduction Measuring Setup