PAB1LFS004Cavallino GT1 Air

User Manual AirPlay wireless speaker system Cavallino GT1 Air (1LFS004) English 2 Safety In structions 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11.Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.Unplug the apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.Please keep the unit in a good ventilation environment. 16.CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 17.This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 18. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert AVERTISSEMENT:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user -serviceable parts inside. Refer servicing to qualified personnel. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 19.No naked flame sources, such as lighted candles, should be placed on the apparatus. 20.Attention should be drawn to environmental aspects of battery disposal. 21. Use of the apparatus in moderate climates. 22.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 23. 24. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. English 3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this devi…

Text truncated - open the document above for the full version.

Logic3 plc Ad Hoc Mode Declaration We, the undersigning company Company Name: Logic3 plc Address: Rhodes Way, Watford, WD24 4YW UK City: Watford Country: United Kingdom Hereby confirm that the following products: Product description: Cavallino GT1 Air Type designation: 1LFS004 Tra d e m a r k : Logic3 Doesn’t have Ad Hoc Mode function on “non-US frequencies”. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US. For this product, only channels 1~11 will be used in USA. Country code selection is disabled. Signature: ________________________ Name: Michael Kirkham / Director

Logic3 plc Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Logic3 plc would like the following documents regarding this submission for FCC ID: PAB1LFS004 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: Michael Kirkham Title: Director Oct 31, 2012

Neutron Engineering Inc. Project No.: 1206C176B Page 1 of 26 ATTACHMENT PHOTOGRAPHS OF EUT Neutron Engineering Inc. Project No.: 1206C176B Page 2 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 3 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 4 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 5 of 26

Model: 1LFS003 Cavallino GT1 Power source:AC 100-240V~50/60Hz Power consumption:180 W USB rating: 5V 2100mA SAA Approval No.:XXXXX IC :10556A-1LFS003 FCC ID:PAB1LFS003 CMIIT ID: R 206-000274 N136 4006184 Model: 1LFS004 Cavallino GT1 Air Power source:AC 100-240V~50/60Hz Power consumption:180 W USB rating: 5V 2100mA SAA Approval No.:XXXXX IC :10556A-1LFS004 FCC ID:PAB1LFS004 CMIIT ID: R XXX-XXXXXX N136 4006184 MODEL: Ferrari 350W型號貼紙(沒有airplay版本) DATE:2012/10/27 EDITION：A4 MODEL: Ferrari 350W型號貼紙(有airplay版本) DATE:2012/10/27 EDITION：A3 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Neutron Engineering Inc. Project No.: 1206C176B Page 6 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 7 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 8 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 9 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 10 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 11 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 12 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 13 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 14 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 15 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 16 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 17 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 18 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 19 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 20 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 21 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 22 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 23 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 24 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 25 of 26 Neutron Engineering Inc. Project No.: 1206C176B Page 26 of 26

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: PAB1LFS004 Project No. : 1206C176B Equipment : Cavallino GT1 Air Model : 1LFS004 Applicant : Logic3 plc Address : Rhodes Way, Watford, WD24 4YW, UK According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna TEST RESULTS EUT： Cavallino GT1 Air Model Name ： 1LFS004 Temperature： 24 °C Relative Humidity： 60 % Pressure： 1016 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX B MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2 1.5849 14.82 30.3389 0.009571 1 Complies 2 1.5849 14.50 28.1838 0.008891 1 Complies 2 1.5849 14.51 28.2488 0.008911 1 Complies Neutron Engineering Inc. EUT： Cavallino GT1 Air Model Name ： 1LFS004 Temperature： 24 °C Relative Humidity： 60 % Pressure： 1016 hPa Test Voltage ： AC 120V/60Hz Test Mode ： TX G MODE /CH01, CH06, CH11 Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 2 1.5849 17.72 59.1562 0.018662 1 Complies 2 1.5849 17.80 60.2560 0.019009 1 Complies 2 1.5849 17.87 61.2350 0.019317 1 Complies

Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 1 of 83 FCC/IC Radio Test Report FCC ID: PAB1LFS004 IC: 10556A-1LFS004 This report concerns (check one) : Original Grant Class II Change Issued Date : Nov. 23, 2012 Project No. : 1206C176B Equipment : Cavallino GT1 Air Model Name : 1LFS004 Applicant : Logic3 plc Address : Rhodes Way, Watford, WD24 4YW, UK Manufacturer : Dongguan Kenwin Digital Technology Limited Address : No.8, Lin Chang Lu, Pinshan 188 Industry District, Tang Xia Town, Dongguan City, Guangdong Province, China. Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 13, 2012 Date of Test: Sep. 13, 2012 ~ Nov. 22, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 2 of 83 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 3 of 83 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS (RADIATED MODE) 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 23 4.2.7 TEST RESULTS (BELOW 30MHZ) 24 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 25 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 32 5 . BANDWIDTH TEST 56 5.1 APPLIED PROCEDURES / LIMIT 56 5.1.1 MEASUREMENT INSTRUMENTS LIST 56 5.1.2 TEST PROCEDURE 56 5.1.3 DEVIATION FROM STANDARD 56 5.1.4 TEST SETUP 57 5.1.5 EUT OPERATION CONDITIONS 57 5.1.6 TEST RESULTS 58 Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 4 of 83 Table of Contents Page 6 . MAXIMUM OUTPUT POWER TEST 62 6.1 APPLIED PROCEDURES / LIMIT 62 6.1.1 MEASUREMENT INSTRUMENTS LIST 62 6.1.2 TEST PROCEDURE 62 6.1.3 DEVIATION FROM STANDARD 62 6.1.4 TEST SETUP 62 6.1.5 EUT OPERATION CONDITIONS 62 6.1.6 TEST RESULTS 63 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 64 7.1 APPLIED PROCEDURES / LIMIT 64 7.1.1 MEASUREMENT INSTRUMENTS LIST 64 7.1.2 TEST PROCEDURE 64 7.1.3 DEVIATION FROM STANDARD 64 7.1.4 TEST SETUP 64 7.1.5 EUT OPERATION CONDITIONS 64 7.1.6 TEST RESULTS 65 8 . POWER SPECTRAL DENSITY TEST 75 8.1 APPLIED PROCEDURES / LIMIT 75 8.1.1 MEASUREMENT INSTRUMENTS LIST 75 8.1.2 TEST PROCEDURE 75 8.1.3 DEVIATION FROM STANDARD 75 8.1.4 TEST SETUP 75 8.1.5 EUT OPERATION CONDITIONS 75 8.1.6 TEST RESULTS 76 9 . EUT TEST PHOTO 80 Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 5 of 83 1. CERTIFICATION Equipment : Cavallino GT1 Air Brand Name : Logic3 Model Name : 1LFS004 Applicant : Logic3 plc Factory : Dongguan Kenwin Digital Technology Limited Address : No.8, Lin Chang Lu, Pinshan 188 Industry District, Tang Xia Town, Dongguan City, Guangdong Province, China. Date of Test : Sep. 13, 2012 ~ Nov. 22, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 / Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-2-1206C176B) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Test result included in this report is only for the 802.11b/g approval part of the product. Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 6 of 83 2. SUMMARY OF TEST RESULTS FCC Part15 (15.247) , Subpart C / RSS-210: 2010 Standard Section Test Item Judgment Remark RSS-GEN 7.2.2 15.207 Conducted Emission PASS RSS-210 A8.5 15.247 (d) Antenna conducted Spurio…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 80 of 83 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 81 of 83 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 82 of 83 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-2-1206C176B Page 83 of 83 Radiated Measurement Photos Above 1000MHz