PAB2LFS002Scuderia FS1 Air

User Manual Scuderia FS1 Air (2LFS002) AirPlay wireless speaker system English 2 Safety Instructions 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Please keep the unit in a good ventilation environment. 16. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 18. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user -serviceable parts inside. Refer servicing to qualified personnel. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 19. No naked flame sources, such as lighted candles, should be placed on the apparatus. 20. Attention should be drawn to environmental aspects of battery disposal. 21. 22. Use of the apparatus in moderate climates. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. AVERTISSEMENT:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR English 3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux c…

Text truncated - open the document above for the full version.

Logic3 plc Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Logic3 plc would like the following documents regarding this submission for FCC ID: PAB2LFS002 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description 4. Part List The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: Michael Kirkham Title: Director Feb 25, 2013

Neutron Engineering Inc. Project No.: 1206C089A Page 2 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 3 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 4 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 5 of 22

Model: 2LFS001 Scuderia FS1 Power source:AC 100-240V~50/60Hz Power consumption: 80 W USB rating: 5V 2100mA SAA Approval No.:XXXXX FCC ID:PAB2LFS001 IC :10556A-2LFS001 CMIIT ID: R 206-000286 N136 MODEL: Logic3 120W型號貼紙(沒有airplay版本) DATE:2012/10/27 EDITION：A4 MODEL: Logic3 120W型號貼紙(有airplay版本) DATE:2012/8/27 EDITION：A3 4006184 Model: 2LFS002 Scuderia FS1 Air Power source:AC 100-240V~50/60Hz Power consumption: 80 W USB rating: 5V 2100mA SAA Approval No.:XXXXX FCC ID:PAB2LFS002 IC :10556A-2LFS002 CMIIT ID: R XXX-XXXXXX N136 4006184 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. N136 4006184

Neutron Engineering Inc. Project No.: 1206C089A Page 6 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 7 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 8 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 9 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 10 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 11 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 12 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 13 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 14 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 15 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 16 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 17 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 18 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 19 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 20 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 21 of 22 Neutron Engineering Inc. Project No.: 1206C089A Page 22 of 22

Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 1 of 103 FCC/IC Radio Test Report FCC ID: PAB2LFS002 IC: 10556A-2LFS002 This report concerns (check one) : Original Grant Class II Change Issued Date : Nov. 14, 2012 Project No. : 1206C089A Equipment : Scuderia FS1 Air Model Name : 2LFS002 Applicant : Logic3 plc Address : Rhodes Way, Watford, WD24 4YW, UK Manufacturer : Dongguan Kenwin Digital Technology Limited Address : No.8, Lin Chang Lu, Pinshan 188 Industry District, Tang Xia Town, Dongguan City, Guangdong Province, China. Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 11, 2012 Date of Test: Sep. 11, 2012 ~ Nov. 13, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 2 of 103 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 3 of 103 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 31 5 . NUMBER OF HOPPING CHANNEL 55 5.1 APPLIED PROCEDURES / LIMIT 55 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 5.1.2 TEST PROCEDURE 55 5.1.3 DEVIATION FROM STANDARD 55 5.1.4 TEST SETUP 55 5.1.5 EUT OPERATION CONDITIONS 55 5.1.6 TEST RESULTS 56 Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 4 of 103 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 58 6.1 APPLIED PROCEDURES / LIMIT 58 6.1.1 MEASUREMENT INSTRUMENTS LIST 58 6.1.2 TEST PROCEDURE 58 6.1.3 DEVIATION FROM STANDARD 58 6.1.4 TEST SETUP 59 6.1.5 EUT OPERATION CONDITIONS 59 6.1.6 TEST RESULTS 60 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 72 7.1 APPLIED PROCEDURES / LIMIT 72 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 72 7.1.2 TEST PROCEDURE 72 7.1.3 DEVIATION FROM STANDARD 72 7.1.4 TEST SETUP 72 7.1.5 EUT OPERATION CONDITIONS 72 7.1.6 TEST RESULTS 73 8 . BANDWIDTH TEST 77 8.1 APPLIED PROCEDURES / LIMIT 77 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 77 8.1.2 TEST PROCEDURE 77 8.1.3 DEVIATION FROM STANDARD 77 8.1.4 TEST SETUP 77 8.1.5 EUT OPERATION CONDITIONS 77 8.1.6 TEST RESULTS 78 9 . PEAK OUTPUT POWER TEST 82 9.1 APPLIED PROCEDURES / LIMIT 82 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 9.1.2 TEST PROCEDURE 82 9.1.3 DEVIATION FROM STANDARD 82 9.1.4 TEST SETUP 82 9.1.5 EUT OPERATION CONDITIONS 82 9.1.6 TEST RESULTS 83 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 87 10.1 APPLIED PROCEDURES / LIMIT 87 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 87 10.1.2 TEST PROCEDURE 87 10.1.3 DEVIATION FROM STANDARD 87 10.1.4 TEST SETUP 87 10.1.5 EUT OPERATION CONDITIONS 87 10.1.6 TEST RESULTS 88 Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 5 of 103 Table of Contents Page 11 . EUT TEST PHOTO 100 Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 6 of 103 1. CERTIFICATION Equipment : Scuderia FS1 Air Brand Name : Logic3 Model Name : 2LFS002 Applicant : Logic3 plc Factory : Dongguan Kenwin Digital Technology Limited Address : No.8, Lin Chang Lu, Pinshan 188 Industry District, Tang Xia Town, Dongguan City, Guangdong Province, China. Date of Test : Sep. 11, 2012 ~ Nov. 13, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 100 of 103 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 101 of 103 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1206C089A Page 103 of 103 Radiated Measurement Photos Above 1000MHz