PD5-WAP561Wireless AP with PoE

Quick Start Guide DRAFT -- CISCO CONFIDENTIAL Cisco Small Business WAP551 Single-Radio 450Mbps 802.11n Access Point with PoE and WAP561 Dual-Radio 450Mbps 802.11n Access Point with PoE Versión en Español para México en el CD Version en français sur CD Versione italiana sul CD Deutsch Version auf CD 2Cisco Small Business WAP551 and WAP561 Wireless-N Access Point with PoE DRAFT -- CISCO CONFIDENTIAL Welcome Thank you for choosing the Cisco Small Business WAP551 or WAP561 Wireless Access Point. The Cisco WAP551 is a single-radio, selectable- band, 450Mbps data rate 802.11n access point, and the Cisco WAP561 is a dual-radio variant of the Cisco WAP551. This guide is designed to familiarize you with the general layout of the access point, describe how to deploy the device in your network, and describe how to configure the device. Your access point has more features and functionality than what is described in this guide. For additional information, see the Administration Guide. A link to the Administration Guide is found in “Where to Go From Here” on page 11. Package Contents •Wireless Access Point •Mounting kit •This Quick Start Guide •Product CD •Ethernet Cable Before You Begin Before you begin the installation, make sure that you have the following equipment and services: •A computer with Browser support for: –Internet Explorer v7.0 or later –Chrome v5.0 or later –Firefox v3.0 or later –Safari v3.0 or later •Tools for installing the hardware •One or more Ethernet network switches •Uninterruptible Power Supply (UPS) to provide backup power to essential devices 1 Cisco Small Business WAP551 and WAP561 Wireless-N Access Point with PoE3 DRAFT -- CISCO CONFIDENTIAL Cisco WAP551 and WAP561 Wireless-N Access Point Features Front Panel The front panel of the devices consists of three lights: Power, WLAN, and LAN. For full descriptions of the colors of the lights and their indications, see “Verifying the Hardware Installation”. A Kensington lock slot is found under the lights. Back Panel The back panel of the devices consists of: •Power Button—Use this button to turn the power on and off. It is not applicable when using PoE. •Power Jack—Use this jack if you are not using PoE. •Kensington Lock Slot—Use to attach a cable and lock to the device. •Reset—See “Rebooting the Devices or Returning them to their Factory Default Settings” for information on the Reset button. •RJ-45 Ethernet Port—Use this auto-sensing, Gigabit Ethernet (802.3) port to connect to network devices, such as computers, routers, or switches. Cisco strongly recommends using Cat5 or better cable for Gigabit connectivity. You may use the Ethernet port to power your device using PoE. Default Settings If you are using a Cisco Small Business RV Series router, the default range for the DHCP assigned address is from 192.168.1.100 to 192.168.1.254. Any device connecting to the same LAN will be assigned an IP address in this range. ParameterDefault Value Usernamecisco Passwordcisco LAN IP Address DHCP address assigned by server Fallback LAN IP192.168.1.245 Subnetwork Mask255.255.255.0 2 4Cisco Small Business WAP551 and WAP561 Wireless-N Access Point with PoE DRAFT -- CISCO CONFIDENTIAL Mounting the Cisco WAP551 and WAP561 Wireless-N Access Points You can place your access point on a desktop, or mount it on a wall or ceiling. Placement Tips • Ambient Temperature—To prevent the access point from overheating, do not operate it in an area that exceeds an ambient temperature of 104°F (40°C). •Air Flow—Both side panels have vents which must be unobstructed to prevent overheating. • Mechanical Loading—The device should be level, stable, and secure to prevent it from sliding or shifting out of position. Wall and Ceiling Mounting The Cisco WAP551 and WAP561 can be wall or ceiling-mounted. There is a mounting kit packed with your device. The kit is designed to install your device to the wall or the ceiling. The dimensions for the mount kit screws are as follows: WARNINGInsecure mounting might damage the device or cause injury. Cisco is not responsible for damages incurred by insecure wall or ceiling mounting. 17.8 to 8.3 mm/ .31 to .33 in 221.8 to 22.3 mm/ .86 to .88 in 35.5 to 6.0 mm/ .22 to .24 in 417.5 to 18.2mm/ .69 to .72 in 3 1 2 4 3 196243 Cisco Small Business WAP551 and WAP561 Wireless-N Access Point with PoE5 DRAFT -- CISCO CONFIDENTIAL To mount the WAP device to a wall or ceiling: STEP1Determine where you want to mount the device. Verify that the surface is smooth, flat, dry, and sturdy. STEP2Drill two pilot holes into the surface x.xx inches (xx mm) apart for your Cisco WAP device. STEP3Insert a screw into each hole, leaving a gap between the surface and the base of the screw head. STEP4Place the upper slots of the bracket over the screws, adjust the screws accordingly, and slide the bracket down until the screws fit snugly into the slots. STEP5Using the bracket as a template, drill two more holes for the lower screws. STEP6Insert a screw into each lower hole. STEP7Slide the WAP device into the bracket, placing the cables or cords through the break-out tab found in the back of the bracket. Connecting the Cisco WAP551 and WAP561 Wireless-N Access Points These instructions assume that your will be using PoE to power your WAP device. If PoE is not provided, power adaptors are sold separately; see Where to Go From Here, page 11. To connect the device to the network: STEP1Connect the Ethernet cable to the Ethernet port of a switch or a router. STEP2Connect the other end of the network Ethernet cable to the Ethernet port of the wireless access point. After installation, all lights should be active. Refer to Verifying the Hardware Installation, page 6 for details about the different lights on each switch. 4 6Cisco Small Business WAP551 and WAP561 Wireless-N Access Point with PoE DRAFT -- CISCO CONFIDENTIAL Verifying the Hardware Installation To verify the hardware installation, complete the following tasks: •Check the cable connections. •Check the s…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Models Name/Part Name/ Artwork Number/ Artwork Rev./ Unit:mm SPEC LABEL 00 Diecut display only Designed/Date/ PANTONE BLACK 30 Nov. ‘12Camille Liu NET8-701500 CISCO WAP561N-EU-R DELTA NETWORKS, INC. THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA NETWORKS. AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT PERMISSION . Graphic Layout Scale/ 1:1 Colors Printed/ Dimensions/ WIDTH HEIGHT 78 mm x 59.5 mm 生產地變更時,需更換地名 IC: 3970A-WAP561 FCC ID: PD5-WAP561 Model: WAP561 Made in China Fabriqué en Chine PoE(IEEE802.3af) Complies with IDA Standards DA00518 Made in Taiwan Fabriqué à Taïwan Wireless-N Dual Radio Selectable-Band Access Point with Single Point Setup Point d'accès Wireless-N double radio à sélection de bande avec configuration de point unique

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12

FCC ID: PD5-WAP561 Report No.: RF120926C25 Operational Description This device is a Wireless AP with PoE, which operates in both of 5GHz and 2.4GHz bands; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 48Vdc form POE. The device is used antenna list as below. The other instruction, please have a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA120926C25 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120926C25 MODEL NO.: WAP561 FCC ID: PD5-WAP561 RECEIVED: Sep. 26, 2012 TESTED: Oct. 04 ~ Oct. 31, 2012 ISSUED: Nov. 01, 2012 APPLICANT: Delta Networks, Inc. ADDRESS: No. 252, Shang Ying Road, Kuei San, Taoyuan Hsien 333, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA120926C25 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................ 4 2. RF EXPOSURE .............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................ 5 2.2 MPE CALCULATION FORMULA ................................................................................... 5 2.3 CLASSIFICATION .......................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................. 6 Report No.: SA120926C25 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120926C25 Original release Nov. 01, 2012 Report No.: SA120926C25 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Wireless AP with PoE MODEL NO.: WAP561 BRAND: CISCO APPLICANT: Delta Networks, Inc. TESTED: Oct. 04 ~ Oct. 31, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: WAP561) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Nov. 01, 2012 Maggie Wu / Specialist APPROVED BY : , DATE :Nov. 01, 2012 Ken Lin / Manager Report No.: SA120926C25 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120926C25 6 of 6 Report Format Version 5.0.0 2.4 Calculation result of maximum conducted power FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 28.08 5.5 20 0.454 1 5180-5240 12.72 5.8 20 0.014 1 5745-5825 26.51 5.8 20 0.339 1 CONCULSION: Both of the WLAN 2.4G & 5.0G can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4G + WLAN 5.0G = 0.454 + 0.339 = 0.793 Therefore, the maximum calculation of this situation is 0.793, which is less than the “1” limit.

Report No.: RF120926C25 1 of 100 Report Format Version 5.1.0 FCC TEST REPORT (15.247) REPORT NO.: RF120926C25 MODEL NO.: WAP561 FCC ID: PD5-WAP561 RECEIVED: Sep. 26, 2012 TESTED: Oct. 04 ~ Oct. 31, 2012 ISSUED: Nov. 01, 2012 APPLICANT: Delta Networks, Inc. ADDRESS: No. 252, Shang Ying Road, Kuei San, Taoyuan Hsien 333, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120926C25 2 of 100 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 5 1. CERTIFICATION ......................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................................ 7 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 7 3. GENERAL INFORMATION ......................................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................................... 11 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................... 15 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 16 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ............................................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 17 4.1.2 TEST INSTRUMENTS .............................................................................................................. 18 4.1.3 TEST PROCEDURES .............................................................................................................. 19 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................... 19 4.1.5 TEST SETUP ............................................................................................................................ 20 4.1.6 EUT OPERATING CONDITIONS ............................................................................................. 20 4.1.7 TEST RESULTS (A) .................................................................................................................. 21 4.1.8 TEST RESULTS (B) .................................................................................................................. 34 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 47 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................ 47 4.2.2 TEST INSTRUMENTS .............................................................................................................. 47 4.2.3 TEST PROCEDURES .............................................................................................................. 48 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................... 48 4.2.5 TEST SETUP ............................................................................................................................ 48 4.2.6 EUT OPERATING CONDITIONS ............................................................................................. 48 4.2.7 TEST RESULTS (A) .................................................................................................................. 49 4.3 6dB BANDWIDTH MEASUREMENT ........................................................................................ 51 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ..................................................................... 51 4.3.2 TEST SETUP ...........…

Text truncated - open the document above for the full version.

Report No.: RF120926C25-1 1 of 57 Report Format Version 5.1.0 FCC TEST REPORT (15.407) REPORT NO.: RF120926C25-1 MODEL NO.: WAP561 FCC ID: PD5-WAP561 RECEIVED: Sep. 26, 2012 TESTED: Oct. 04 ~ Oct. 31, 2012 ISSUED: Nov. 01, 2012 APPLICANT: Delta Networks, Inc. ADDRESS: No. 252, Shang Ying Road, Kuei San, Taoyuan Hsien 333, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120926C25-1 2 of 57 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION .......................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 6 3. GENERAL INFORMATION .......................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................ 10 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................................. 12 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 13 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 13 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 14 4. TEST TYPES AND RESULTS ................................................................................................... 15 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................... 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT................................. 15 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ............................ 15 4.1.3 TEST INSTRUMENTS ............................................................................................................... 16 4.1.4 TEST PROCEDURES ............................................................................................................... 17 4.1.5 DEVIATION FROM TEST STANDARD ..................................................................................... 17 4.1.6 TEST SETUP ............................................................................................................................. 18 4.1.7 EUT OPERATING CONDITION ................................................................................................ 18 4.1.8 TEST RESULTS (A)................................................................................................................... 19 4.1.9 TEST RESULTS (B)................................................................................................................... 28 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................ 37 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ......................................................... 37 4.2.2 TEST INSTRUMENTS ............................................................................................................... 37 4.2.3 TEST PROCEDURES ............................................................................................................... 38 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................................... 38 4.2.5 TEST SETUP .............................................................................................................. ............... 38 4.2.6 EUT OPERATING CONDITIONS .............................................................................................. 38 4.2.7 TEST RESULTS (B).................................................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (Mode A) 3 RADIATED EMISSION TEST (Mode B)