PD5SGCM-W50TI ZigBee communication module

SGCM-W50 User Manual DNI Smart Grid Communication Module series Rev. 1.0 2014/11/12 Notice: 1. Delta Networks Inc. reserves the right to change specifications detailed in this document at any time without notice, and assumes no responsibility for any errors within this document. 2. This document contains proprietary technical information in which is the property of the Delta Networks inc. and shall not be disclosed to others in whole or in part, reproduced, copied, or used as the basis for design, manufacturing, or sale of apparatus without written permission of Delta Networks Inc. DNI SGDC-W50 specification i Table of Content 1. PRODUCT OVERVIEW ........................................................................................................................................... 1 1.1. GENERAL DESCRIPTION ......................................................................................................................................... 1 1.2. FEATURES .............................................................................................................................................................. 1 2. PIN ASSIGNMENT .................................................................................................................................................... 2 2.1. 2 × 5 PIN CONNECTOR ............................................................................................................................................ 2 2.2. CONNECT ANTENNA TO IPEX................................................................................................................................. 3 2.3. LED ....................................................................................................................................................................... 3 3. SOFTWARE ARCHITECTURE ............................................................................................................................... 4 4. REVISION HISTORY ............................................................................................................................................... 5 DNI SGDC-W50 specification 1 1. Product Overview 1.1. General Description DNI Communication module – SGCM-W50 is a ZigBee communication module based on TI CC2538 SoC solution, which combines a powerful ARM Cortex M3-based MCU and a low power IEEE 802.15.4 radio. In order to increase the application feasibility of SGCM-W50 module, a PA TI CC2592 is adopted to provide +20dBm transmit power for some long distance transmission requirements, especially for applying in outdoor environment. An on board PCB antenna with IPEX connectors can support either internal PCB antenna or external antenna to increase the flexibility of different applications. The module is provided with TI ZigBee Pro compatible Stack and users are easily to develop their application software. It will be conveniently used in various wireless communication scenarios including home automation, building automation, environment monitoring, smart grid as well as internet of things applications. Figure 1. SGCM-W50 ZigBee module block diagram. 1.2. Features
2.4GHZ, IEEE 802.15.4, ZigBee Pro compatible
ARM Cortex M3-based MCU with 256kB flash and 32kB RAM.
Increase transmission power up to +20dBm.
Support either PCB antenna or external antenna.
Industrial temperature for outdoor or critical environment (−30°C to +70°C)
Lead-free and RoHS compliant DNI SGDC-W50 specification 2 2. Pin assignment 2.1. 2 × 5 pin connector Figure 2 SGCM-W50 2x5 connector. Pin # Pin Function Description 1 DI/O 4 General purpose digital I/O (SW define) 2 DI/O 3 General purpose digital I/O (SW define) 3 ZigBee_RST Reset input 4 DI/O 2 (programming mode detection) General purpose digital I/O (SW define) 5 5Vin Power supply +5v (Core voltage range +4v ~ +5v) 6 GND Ground 7 UART_RxD Receive data input (to ZigBee) 8 UART_TxD Transmit data output (from ZigBee) 9 DI/O 0 General purpose digital I/O (SW define) 10 DI/O 1 General purpose digital I/O (SW define) Note: All the general purpose digital I/O can be defined as other peripheral, such as UART, SSI, I2C, time and so on. For more information, please refer to TI CC2538 specification. DNI SGDC-W50 specification 3 2.2. Connect antenna to IPEX Figure 3 SGCM-W50 IPEX. Antenna Description PCB Connect IPEX1 and IPEX2 using cable coaxial External Connect external antenna using IPEX2 2.3. LED Figure 4 SGCM-W50 LED. LED Description LED1 Power LED2 User define LED3 User define DNI SGDC-W50 specification 4 3. Software architecture We can provide two different roles of SGCM-W50, one is Coordinator Communication Module and the other is Terminal Communication Module. The module is provided with TI ZigBee Pro Stack or IEEE802.15.4 Stack. The module will handle network formation, network join, routing, data transmission, data forwarding, and etc. Users can implement UART protocol between user device and the module, and application protocol between CCM and TCM. Figure 5 SGCM-W50 software architecture. DNI SGDC-W50 specification 5 4. Revision History Revision Date By Whom Revised notes 1.0 2014/11/12 YaoChing Hsieh  1 st released. DNI SGDC-W50 specification 6 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications…

Text truncated - open the document above for the full version.

FCC ID: PD5SGCM-W50 Report No.: RF141006C28 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 20, 2014 Dear Application Examiner, Delta Networks, Inc., It’s a TI ZigBee communication module, FCC ID: PD5SGCM-W50 would like to have your authorization as a modular device. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip CC2538NF23. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is CC2538NF23. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: PD5SGCM-W50 Report No.: RF141006C28 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Robert Huang Senior Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT

Label location

Page 2 Page 3

Report No.: SA141006C28 1 of 5 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA141006C28 MODEL NO.: SGCM-W50 FCC ID: PD5SGCM-W50 RECEIVED: Oct. 06, 2014 TESTED: Oct. 16 ~ Oct. 28, 2014 ISSUED: Nov. 03, 2014 APPLICANT: Delta Networks, Inc. ADDRESS: 252, Shang Ying Road, Kuei San Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA141006C28 2 of 5 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................................. 3 1. CERTIFICATION ............................................................................................................... 4 2. RF EXPOSURE ................................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................... 5 2.2 MPE CALCULATION FORMULA ...................................................................................... 5 2.3 CLASSIFICATION ............................................................................................................. 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................... 5 Report No.: SA141006C28 3 of 5 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA141006C28 Original release. Nov. 03, 2014 Report No.: SA141006C28 4 of 5 Report Format Version 5.0.1 1. CERTIFICATION PRODUCT:TI ZigBee communication module MODEL:SGCM-W50 BRAND:Tatung APPLICANT:Delta Networks, Inc. TESTED:Oct. 16 ~ Oct. 28, 2014 TEST SAMPLE:ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (model: SGCM-W50) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Nov. 03, 2014 Polly Chien / Specialist APPROVED BY : , DATE : Nov. 03, 2014 Ken Liu / Senior Manager Report No.: SA141006C28 5 of 5 Report Format Version 5.0.1 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 23.71 2.76 20 0.088 1 ---END---

Report No.: RF141006C28 1 of 37 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF141006C28 MODEL NO.: SGCM-W50 FCC ID: PD5SGCM-W50 RECEIVED: Oct. 06, 2014 TESTED: Oct. 16 ~ Oct. 28, 2014 ISSUED: Nov. 03, 2014 APPLICANT: Delta Networks, Inc. ADDRESS: 252, Shang Ying Road, Kuei San Taoyuan Shien 333, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141006C28 2 of 37 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 17 4.1.7 TEST RESULTS .......................................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 22 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 22 4.2.2 TEST INSTRUMENTS ................................................................................................................. 22 4.2.3 TEST PROCEDURES ................................................................................................................. 23 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 23 4.2.5 TEST SETUP ............................................................................................................................... 23 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 23 4.2.7 TEST RESULTS .......................................................................................................................... 24 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 26 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST