PED-SURESIGNALSURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR

• W A R N I N G • Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. Sure Signal Sure Signal Max Sure Signal CSR Installation Manual For U.L. Listed Applications Version 1.0 FCC COMPLIANCE STATEMENT CAUTION : Changes or modifications not expressly approved by Sur-Gard Security Systems Ltd. could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 and Part 22 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4. INDUSTRY CANADA COMPLIANCE STATEMENT This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur du Canada. WARNING:To satisfy FCC RF exposure requirements for transmitting devices, a separation distance of 30 cm or more must be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Table of Contents Programming Sections4 [01]-[05] Zone Definition.....................................................4 [06] Configuration Options..................................................4 [10] First Account Number..................................................4 [11] Second Account Number.............................................4 [15] First Receiver Man Number..........................................4 [16] Second Receiver Man Number.....................................4 [20] Communicator Format Options...................................4 [21] Network Connection Selections...................................4 [22] Transmission Options...................................................4 [23] Number of Attempts to Each Man...............................4 [24] Response Wait Time.....................................................4 [30]-[78] Individual Event - Transmission Toggle................4 Activating the Sure Signal5 Transmitting and Receiving..................................................5 Test Transmissions...............................................................5 Sure Signal Trouble Supervision5 Sure Signal Trouble Shooting5 [803] Sure Signal Programming (PC5010/580/1555/5015)6 For Your Records14 Appendix A – SIA Reporting Codes15 Antenna Relocation Diagram17 Standard Connection with DSC Control Panel18 Limited Warranty/How to Contact Us Inside Back Contentsii Important Information...........................................................ii Sure Signal Glossary of Terms..................................................ii Introducing the Sure Signal1 Specifications.......................................................................1 Antenna...............................................................................1 RF Power Output..................................................................1 Power Supply.......................................................................1 Dimension............................................................................1 Weight.................................................................................1 How the Sure Signal Works1 Installation2 Mounting the Sure Signal.....................................................2 Mounting the Antenna.........................................................2 Wiring Connections..............................................................2 Keybus Connection...............................................................2 Bell IN Terminal....................................................................2 Bell OUT Terminal................................................................2 Tamper Terminal..................................................................2 Secure Installation................................................................2 UL Requirements..................................................................2 Connection Diagram3 Enrolling the Sure Signal Radio4 Relocating the Antenna4 Relocating the Sure Signal4 i Contents Important Information This manual is based on the production version of the included wireless device. Software changes may have occurred after the revision of this manual. Caution Any changes or modifications not expressly approved in this document could void your warranty for this equipment and void your authority to use this equipment. Warning Only use the antenna provided by SG Wireless Communica- tions. The use of any other type will invalidate the warranty and may be dangerous. Customer Service For customer support please call SG Wireless Technical Support at 416-665-0051 ext. 1, toll free at 1-88…

Text truncated - open the document above for the full version.











   
         !"  

 !"#$%&' ( )*+$$,$ -./0 1&2*&'3 45   *6$,$7 # 6*-    6 "  6  89  6 
  #*  6  !#   "$$%&%'*6$,$7 ((%%%) $$*%%
*%'*%'*%'%)+$*% '%$$+,%-.+(*'$%
 /0%-  0)!12!!& ! /!314"5 ! /!314"5"6! /!314"5 !*$%%)37 8
395"7 2 2:(%)%) '(&%9  ;5$% <(+% 9=2 0
,*&9 7>7 ?@ 19= *%0$904  0),$%)%$$*%A%)$&''& %$$*% %'';%%8)*%%  **%+%:-B(%$$'33.+ )&%)@%!21!*%!%5%'%%%% $$+**&%
.*4%*" 2  -  3')+, $%)%%%*%*%055
//9    0/5/.?4/4-9 2 22   C%    0)5 .-/&-  D-.- /&&   05#?  



 










2












 
 
 




  


!"#$%
& '




!"#!

( ) *

+++,-  # ), '
.' *

,-  /0' , 

SUR-GARD Security Systems Ltd. 401 Magnetic Drive Units 24-29, Downsview, Ontario, Canada M3J 3H9, Tel: 416-665-4494 January 24, 2001 Federal Communications Commission, 7435 Oakland Mills Road, Columbia, Maryland 21046 AUTHORITY TO ACT AS AGENT TO THE FEDERAL COMMUNICATIONS COMMISSION Applicant: Sur-Gard Security Systems Ltd. Product: SG-Sure Signal Model: Sure Signal, Sure Signal Max, Sure Signal CSR FCC ID:PED-SURESIGNAL I hereby appoint UltraTech Engineering Labs. Inc. (UltraTech) to act as my agent in preparation of this application to F.C.C. for authorization of equipment under F.C.C. Rules. I also certify that the information provided, properly described the device or system for which authorization is required Regards, Dan Nita Approvals Supervisor

RESEARCH IN MOTION Research In Motion Limited 295 Phillip Street Waterloo, Ontario Canada N2L 3W8 +1 519 888 7465, fax +1 519 888 6906 E-mail: [email protected] Our Ref: 01947-CERT-FCC-COVER-021February 21, 2001 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21045 Reference :FCC ID : L6AR902M-2-O Subject :Letter requesting confidentiality of R902M-2-O radio modem device FCC Certification application. Pursuant to CFR 47 Chapter 1 Section 0.459, Research In Motion Limited (RIM) requests that the following identified detailed technical information regarding the R902M-2-O device be held confidential by the Federal Communication Commission (FCC) and as such be withheld from public inspection. RIM does not disclose proprietary confidential information about our products to any third parties and as such we request that the FCC does the same and forward the confidentiality acceptance letter to RIM. Our FCC submissions are considered proprietary confidential information. Pursuant to CFR 47 Chapter 1 Sections 0.457(d) and 0.457(d)(2)(i) the exhibits contain details of trade secrets and technical data that is customarily guarded from competitors and not released to the public by Research In Motion Limited. The specific parts of the Exhibits indicated in this letter are considered confidential by RIM and as such should be prevented from disclosure to public and competitors. RIM has taken necessary measures to have limited access to confidential documents only to RIM internal employees on a need-to-know basis, and have signed confidentiality agreements with employees. If the disclosure of such information is made public, it will cause serious competitive harm to RIM. Previously, none of the requested confidential Exhibits have been disclosed to third parties by RIM. The following Exhibits with specific sections described, submitted with the Form 731 Attachments should be held confidential: Exhibit Parts List/Tune Up InfoSection 010-9-1 and 010-9-2, CFR 47 Section 2.983(d)(9) - Description of operational, test, and device tune-up technical procedure-“DOC-01606-007”, and operators’ manual-“DOC- 01606-008” Section 010-10, CFR 47 Section 2.983(d)(10) - Description of frequency stabilizing circuitry Exhibit Parts List/Tune Up InfoSection 010-11-1, CFR 47 Section 2.983(d)(11) - Description of circuits for suppression of spurious radiation Section 010-11-2, CFR 47 Section 2.983(d)(11) - Description of circuits for modulation limiting Section 010-11-3, CFR 47 Section 2.983(d)(11) - Description of circuits for power limiting Exhibit Operational DescriptionSection 010-12 and 010-12-1, CFR 47 Section 2.983(d)(12) - Description of digital modulation format and necessary bandwidth Exhibit Parts List/Tune Up InfoSection 010-12-2 and 010-12-3, CFR 47 Section 2.983(d)(12) – Modulation generation methods and circuits. Detailed diagrams of modulation format and generation methods and circuits Exhibit Operational DescriptionSection 011-1 and 011-2, CFR 47 Sections 2.975(a)(3), 2.983(d)(6) and 2.1033(b)(4) - Detailed system and functional description Exhibit Parts List/Tune Up InfoSection 011-3, CFR 47 Sections 2.975(a)(3), 2.983(d)(6) and 2.1033(b)(4) - Detailed technical RF and electrical circuit description Exhibit Block Diagram01947-CERT-FCC-BLOCK-“R902M-2-O RADIO BLOCK”, CFR 47 Section 2.983(d)(6) – Detailed technical radio modem block diagram Exhibit Schematics“Tadpole OEM” SCH-01947-001, CFR 47 Section 2.983(d)(7) - Complete technical schematic circuit diagrams Yours truly, MasudS.Attayi,P.Eng. Senior Certification Engineer Research In Motion Limited ( 519 ) 888 – 7465 x 2442 [email protected] RESEARCH IN MOTION Research In Motion Limited 295 Phillip Street Waterloo, Ontario Canada N2L 3W8 +1 519 888 7465, fax +1 519 888 6906 E-mail: [email protected] Our Ref: 01947-CERT-FCC-Cover-022February 21, 2001 Federal Communications Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Rd. Columbia, Md. 21046 FCC ID:L6AR902M-2-O Subject:FCC Part 90 Certification Application for Research In Motion Limited, Model R902M-2-O This is to inform that Research In Motion is submitting the technical documentation of our radio modem Model R902M-2-O (existing FCC ID: L6AR902M-2-O ) in support of the application for Certification of our integrator, SG-SURE Signal , with FCC ID: PED-SURESIGNAL . The Model R902M-2-O is a radio modem intended for integration into other equipment to allow wireless data communication. All required documents in compliance with Parts 2 and 90 of the FCC Rules have been provided in the attached Exhibits. Research In Motion would like to request confidentiality as indicated in the Form 731, Item 8 and as requested in the letter Ref: 01947-CERT-FCC-COVER-021, under Exhibit “Covering Letters”. Please do not hesitate to call at (519) 888-7465 x2442 or email at [email protected] should you require additional information or have any questions. Yours truly, MasudS.Attayi,P.Eng. Senior Certification Engineer Research In Motion Limited ( 519 ) 888 – 7465 x 2442 [email protected]


 
 


 
 
 

 ! !
" 
#
$%
$&
' ()
***+

, (
-


   
.$+
"/(
 ((
 
# ( 0 

*


 !"#$ #% %"%#%! &#' %"%#$%!%!%$$%!%!(  $$%! )*% &&# ( +  *)"!%      * ,  *  -.   *  
  +)  * 
 
 1

2 
)*% &&# ,
! (
( /

3 
4
4
#% %"%#%! &# ' %"%#
 0  
! 4
4
,,(  
5
 5  
0
! 44 (
5 
, 0(
  ( 

,
  
+
5
6##
 ( 
'4 
3 



4
,   
5
  
+.78
5
4
#   9
 ( 

  
++70878
5
4
6  
5
:5  
 
'4 
  
 4 ;


! 44 ( 
5 
, 0(
,  
 (
!4 4
! (
0
,  (  



5
(!
5
  
0
4
,  
 0  
4 

 (
!4 4
! (
 
  (
0
(  

4
, 0(
0
4
,  

'4
  ( 
5   (
 (

(  

5 (( !)

(%!" (  (


<
:=
:
 
$
>#?
..
$+


<
:=
:
 
$
 4 
..*-

$

+

:5

4

3 
,( 

 
4  

 

0

'"
6<<
 0 )


"
'<<>&"=<
=")
------.-$-


@ 
 (


= 
,, (
 ,  

Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 1 of 6 Complete Assembly of the Sur-Gard SG-Sure Signal The complete assembly consists of S-G I/O Communication Board, RIM 902M Radio Modem Module (FCC ID: L6AR902M-2-O) and Max Lion Corporation B-27 T antenna (Top View) Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 2 of 6 Complete Assembly of the Sur-Gard SG-Sure Signal The complete assembly consists of S-G I/O Communication Board, RIM 902M Radio Modem Module (FCC ID: L6AR902M-2-O) and Max Lion Corporation B-27 T antenna (Bottom View) Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 3 of 6 RIM 902M Radio Modem Module, Model R902M-2-O, FCC ID: L6AR902M-2-O Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 4 of 6 RIM 902M Radio Modem Module, Model R902M-2-O, FCC ID: L6AR902M-2-O Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 5 of 6 RIM 902M Radio Modem Module, Model R902M-2-O, FCC ID: L6AR902M-2-O Exhibit 10 - External EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 6 of 6 Max Lion Corporation, B-27 T Antenna, Gain = 3 dBi


 
 


 
 
 

 ! !
" 
#
$%
$&
' ()
***+




  












  (
, )
  





 (
, )
------------












#



























'. 
 
/( 
! .
0 
+
1
.
2##
( 





"/  

 34 

.
1 (( ! 
!
  )
56
'. 
 

 
 
. 1 (
 1  

56
'. 
 
 
 /

 1 
 
 (  

 1 
.

 
  
/  

2##
7)
0887,


#
9  1  
 3 :



'.
2##
3 (
5;
-
;6

/( 

.
3 <
1
.
 (
3  < 
.
. (
.
0#=

.

  
0( 

 . 
 ! 





%  




, 
// (
 /  


 
 


 
 
 

 ! !
" 
#
$%
$&
' ()
***+



  












, 










  (
- )
    










 (
- )
............






/
#





































'0 
 
1( 
! 0
2 
+
3
0
,##
( 





"1  

 45 

0
3 (( ! 
!
  )
67
'0 
 

 
 
0 3 (
 3  

67
'0 
 
 
 1

 3 
 
 (  

 3 
0

 
  
1  

,##
/)
288/-

#
9  3  
 4 :
























; <








 
  


'0
,##
4 (
6=
.
=7

1( 

0
4 <
3
0
 (
4  < 
0
0 (
0
2#;

0

  
2( 

 0 
 ! 





%  




- 
11 (
 1  
8
/-
;"''"
8'
;#>8'

Exhibit 11 - Internal EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 1 of 4 S-G I/O Communication Board (Top View) Exhibit 11 - Internal EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 2 of 4 S-G I/O Communication Board (Bottom View) Exhibit 11 - Internal EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 3 of 4 RIM 902M Radio Modem Module, Model R902M-2-O, FCC ID: L6AR902M-2-O Exhibit 11 - Internal EUT Photos Sur-Gard Security Systems Ltd SG-Sure Signal, Models SURE SIGNAL, SURE SIGNAL MAX & SURE SIGNAL CSR FCC ID: PED-SURESIGNAL Photo 4 of 4 RIM 902M Radio Modem Module, Model R902M-2-O, FCC ID: L6AR902M-2-O

#%9&'" ?# " @   #-33 6*-" $  6 "  6  89  6 
 #*  6 
 46 #
?
A% *
8   =%* + % 5?1
 "%''3  0-G97 2 72  
;-G97 2 72  /9+)-%%*)H$%*-* B%9)%%$9##(((-%%*)2-*  • "3038 E:$%%= 4D5".8 !":"**%%=I""#" !0/58"%: D38F$: • "**%3%8:"25"=8/$#""./#": • *&@#5%
8 !": •                          
 
 

@  



 A7C
9*
4,70*,7+
>7/0*@
73
09*
A->>-.738
0+<>*
/9+>>
<*
2/*@
0-
*D+>2+0*
09*
*3D7,-3=*30+>
7=:+40
-A
92=+3
*;:-/2,*
0-
,+@7-CA,*12*345
 
,+@7+07-3
+/
/:*47A7*@
73
(!<























23,132&$'.
*&#'8
'/

2/*&(
$+&2.,* $

M
 %Π, 
M
 %Π, 


M

 





M




 %


&9*,*$
$
:-.*,
73:20
0-
09*
+30*33+
73
=&

 $
127D+>*30
*AA*407D*
7/-0,-:74
,+@7+0*@
:-.*,

$
:-.*,
@*3/705
=&%4= 

$
32=*,74
8+73
-A
+30*33+
,*>+07D*
0-
7/-0,-:74
,+@7+0-,

,$
@7/0+34*
0-
4*30*,
-A
,+@7+07-3
73
4=

 
M
#
@"=
M
#(
=&
=+;
*7,:
=*+/2,*@
+0
)(
6


M
#)%((
=&%4= 
>7=70/
A-,
8*3*,+>
:-:2>+07-3%234-30,->>*@
*;:-/2,*


  
#(
 

4=



9*
=737=2=
/+A*05
@7/0+34*
7/
+::,-;7=+0*>5

4=

3
09*
2/*,
=+32+>E

*;:-/2,*
/0+0*=*30
.7>>
/:*47A7*@
+
/+A*05
@7/0+34*
-A
(
4=

   
    6*-  7  6 "  6  89  6 
 #*  6 

 *6$,$7          

  


,,$,,$$(
) 
 !"#%&'( )
 .;$
 7% *
8
 0)0%$%3%)"%)%' 0-5 .'/&  D*.%'/&& %0*)1$'5  %9
       $%.$9?)   0%9?&0) 
3#/30*)*    3%9
     0%%9F  
    
                       .


 
 
 



  


!"#$%








& '




!"#!
<$:::7.*$7, ,+.=7.>$,7

#%9&'" ?# " @   $ 6*-" $  6 "  6  89  6 
 #*  6 
 46 #
?
A% *
8   =%* + % 5?1
 "%''3  0-G97 2 72  
;-G97 2 72  /9+)-%%*)H$%*-* B%9)%%$9##(((-%%*)2-*  • "3038 E:$%%= 4D5".8 !":"**%%=I""#" !0/58"%: D38F$: • "**%3%8:"25"=8/$#""./#": • *&@#5%
8 !": •                          
 
  ?
   

  

  


  

 

 
  


 
  

 
   

 
 
 
 
   


   
   

 

 
   

  
    




  
   

 
  


 
 


  
 
  

  
 
   

   
 
  



 
  




 
  

 

 !

 "

  



 
 !


   
  

 
 

 
   !

 
    #

 
      #

 
 
  $#

  %  
  

  
"

  $#


&

'

(

)(()
 
 ! "  "

#$%  #$&$$"
 
'$ ()&$ "

'$
$$

'$ *

  
   %  
  
 
'

)((
 
 ! "   

#$%  #$&$$…

Text truncated - open the document above for the full version.

ELECTROMAGNETIC EMISSIONS TEST REPORT BY COM-SERVE CORPORATION KITCHENER, ONTARIO CANADA RESULTS R902M-2-O COMPLIANCE (yes) (no) RF POWER OUTPUT Transmitter: 2.985 ( ) ( ) OCCUPIED BANDWIDTH Transmitter: 2.989 ( X ) ( ) SPURIOUS EMISSIONS AT THE ANTENNA TERMINALS Transmitter: 2.991 ( X ) ( ) FIELD STRENGTH OF SPURIOUS RADIATION Transmitter: 2.993 ( X ) ( ) FREQUENCY STABILITY Transmitter: 2.995 ( ) ( ) BANDWIDTH LIMITATIONS Transmitter: 90.210(j) ( X ) ( ) SYSTEM DESCRIPTION The R902M-2-O Radio Modem Device The R902M-2-O radio modem is intended for integration into other equipment to allow wireless data communication. The R902M-2-O has a standard TTL level serial asynchronous interface allowing it to communicate directly with embedded controllers and host processors. Radio evaluation and application development is facilitated by the radio monitor board (PCB-02120-001). The radio monitor board translates the TTL serial interface signals to standard RS-232 level signals. The RS-232 level signals can be directly interfaced to a personal computer serial port. The radio monitor board acts as an interface between a standard serial I/O and the RIM R902M-2-O radio. The board translates the 3.0 volt serial interface signals to standard RS-232 level signals. The radio monitor board also provides a regulated and filtered 4.3 VDC to the RIM R902M-2-O radio. The radio power and the level translation circuit power, are derived from a 05V @ 2.4A AC/DC power adapter, model number WR91A2400CCP. The R902M-2-O radio, radio monitor board, AC adapter, 9123 Eclipse II cellular antenna and all required interface cables will be typically marketed as the “RIM 902M Radio Evaluation and Development Kit”. The OEM 900 MHz packet data radio modem is formally known as model R902M-2-O . The RIM radio monitor board, RS-232 converter is formally model 02120-001 . The antenna used for testing and to be included in the evaluation and development kit is an ECLIPSE II magnet mount cellular antenna Model 9123 from the Antenna Company International Limited. Please refer to the attached data sheet for Model 9123. The model 9123 is a semi-custom device with a 6 feet RG58A/U cable and a SMA male connector. All other specifications are the same as standard models 9110, 9114, or 9119. Normal radio modem operation for live use is called burst packet activity. The radio is normally in receive mode listening to all network activity. When a data packet is received that is explicitly addressed to the radio, it then transmits a short acknowledgment packet. When data is to be transmitted from the radio modem, the radio modem first receives system information from the network to determine when to transmit. There is no dete…

Text truncated - open the document above for the full version.