PEG362802.4GHz Cordless Phone Base and Handset System

1 112803A-1 OWNER’S MANUAL # 36122 ver. 112803A-1 Page: 1 ENGLISH VERSION IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at http://www.nwbphones.com for technical support and information on our other products. WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of excess moisture. If accidentally dropped into water, the AC adapter should immediately be unplugged from the wall along with the telephone line cord. THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE OWNER'S MANUAL. Excursion ® 36122 CARTON CONTENTS • 36122 Base and Handset • Rechargeable Ni-Cd Battery Pack • Telephone Line Cord(Short and Long) • AC Adaptor • User’s Manual • Warranty Card • Accessory Order Form • Wall Mount Screws and Hardware 2 112803A-1 OWNER’S MANUAL # 36122 ver. 112803A-1 Page: 2 ENGLISH VERSION SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating. These openings should never be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contractor when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. 112803A-1 3 OWNER’S MANUAL # 36122 ver. 112803A-1 Page: 3 ENGLISH VERSION C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. INSTALLATION PRECAUTIONS 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. MAINTENANCE 1. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. 2. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction. read and follow these instructions: 1. Use only the 3.6V, 350 mAh, Ni-Cd battery pack . 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4 112803A-1 OWNER’S MANUAL # 36122 ver. 112803A-1 Page: 4 ENGLISH VERSION 4. Exercise care in handling the battery in order not to short the battery with conducting …

Text truncated - open the document above for the full version.

SENTON Enterprises Limited Flat 10, 17/F, Fo Tan Industrial Centre, 26-28 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 1710 Tel: (852) 2687-1712 Fax: (852) 2687-4125 : () () E-mail address: [email protected] : ( ) APPENDIX A "I, an officer of SENTON Enterprises Limited do hereby authorize Intertek Testing Services to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 1992) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,853(a). By Signature Printed Title Engineering Manager

Photo 1: External photo of EUT (Base) Photo 2: External photo of EUT (Base) Photo 3: External photo of EUT (Base) 36122 Photo 4: External photo of EUT (Base) 36122 Photo 5: External photo of EUT (Base) Photo 6: External photo of EUT (Base) Photo 7: External photo of EUT (Base) 36122 Photo 8: External photo of EUT (Base) 36122 Photo9: External photo of Series model (Base) Photo 10: External photo of Series model (Base) Photo 11: External photo of Series model (Base) 36121 Photo 12: External photo of Series model (Base) 36121

Photo 1: External photo of EUT (Handset) Photo 2: External photo of EUT (Handset) Photo 3: External photo of EUT (Handset) 36122 Photo 4: External photo of EUT (Handset) 36122

FCC ID Location FCC ID Location

Photo 1: Internal photo of EUT (Base) 36122 Photo 2: Internal photo of EUT (Base) 36122 Photo 3: Internal photo of EUT (Base) 36122 Photo 4: Internal photo of EUT (Base) 36122 Photo 5: Internal photo of EUT (Base) 36122 Photo 6: Internal photo of EUT (Base) 36122 Photo 7: Internal photo of EUT (Base) 36122 Photo 8: Internal photo of EUT (Base) 36122 Photo 9: Internal photo of EUT (Base) 36122 Photo 10: Internal photo of EUT (Base) 36122 Photo 11: Internal photo of EUT (Base) 36122 Photo 12: Internal photo of EUT (Base) 36122 Photo 13: Internal photo of EUT (Base) 36122 Photo 14: Internal photo of EUT (Base) 36122 Photo 15: Internal photo of EUT (Base) 36122 Photo 16: Internal photo of EUT (Base) 36122 Photo 17: Internal photo of EUT (Base) 36122 Photo 18: Internal photo of EUT (Base) 36122 Photo 19: Internal photo of Series model (Base) 36121 Photo 20: Internal photo of Series model (Base) 36121 Photo 21: Internal photo of Series model (Base) 36121 Photo 22: Internal photo of Series model (Base) 36121 Photo 23: Internal photo of Series model (Base) 36121 Photo 24: Internal photo of Series model (Base) 36121 Photo 25: Internal photo of Series model (Base) 36121 Photo 26: Internal photo of Series model (Base) 36121 Photo 27: Internal photo of Series model (Base) 36121 Photo 28: Internal photo of Series model (Base) 36121 Photo 29: Internal photo of Series model (Base) 36121 Photo 30: Internal photo of Series model (Base) 36121 Photo 31: Internal photo of Series model (Base) 36121 Photo 32: Internal photo of Series model (Base) 36121 Photo 33: Internal photo of Series model (Base) 36121

Photo 1: Internal photo of EUT (Handset) 36122 Photo 2: Internal photo of EUT (Handset) 36122 Photo 3: Internal photo of EUT (Handset) 36122 Photo 4: Internal photo of EUT (Handset) 36122 Photo 5: Internal photo of EUT (Handset) 36122 Photo 6: Internal photo of EUT (Handset) 36122 Photo 7: Internal photo of EUT (Handset) 36122 Photo 8: Internal photo of EUT (Handset) 36122 Photo 9: Internal photo of EUT (Handset) 36122 Photo 10: Internal photo of EUT (Handset) 36122 Photo 11: Internal photo of EUT (Handset) 36122 Photo 12: Internal photo of EUT (Handset) 36122 Photo 13: Internal photo of EUT (Handset) 36122 Photo 14: Internal photo of EUT (Handset) 36122

FCC ID. : PEG36121-2 Report No.: EME-040211 Page 1 of 44 EMC TEST REPORT Report No. : EME-040211 Model No. : 36122 Issued Date : Mar. 31, 2004 Applicant : SENTON Enterprises Limited Flat 10, 17/F., Fotan Ind. Centre, 26-28 Au Pui Wan St., Fo Tan Shatin, N.T. Hong Kong Test By : Intertek Testing Services Taiwan Ltd. No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li, Shiang-Shan District, Hsinchu City, Taiwan This test report consists of 44 pages in total. It may be duplicated completely for legal use with the allowance of the applicant. It shall not be reproduced except in full, without the written approval of Intertek Laboratory. The test result in this report only applies to the tested sample. Kevin Chen Project Engineer Reviewed By Elton Chen FCC ID. : PEG36121-2 Report No.: EME-040211 Page 2 of 44 Table of Contents Summary of Tests.........................................................................................................3 1. General information..................................................................................................4 1.1 Identification of the EUT....................................................................................4 1.2 Additional information about the EUT................................................................4 1.3 Antenna description.............................................................................................5 1.4 Peripherals equipment.........................................................................................5 1.5 Supporting equipment.........................................................................................5 2. Test specifications.....................................................................................................6 2.1 Test standard.......................................................................................................6 2.2 Operation mode...................................................................................................6 2.4 Test equipment....................................................................................................7 3. Radiated emission test FCC 15.249 (C).....................................................................8 3.1 Operating environment........................................................................................8 3.2 Test setup & procedure........................................................................................8 3.3 Emission limit.....................................................................................................9 3.3.1 Fundamental and harmonics emission limits.....................................................9 3.3.2 General radiated emission limits.....................................................................10 3.4 Radiated spurious emission test data.................................................................11 3.4.1 Measurement results: frequencies equal to or less than 1 GHz........................11 3.4.2 Measurement results: frequency above 1GHz.................................................18 4. Conducted emission test FCC 15.207......................................................................24 4.1 Operating environment......................................................................................24 4.2 Test setup & procedure......................................................................................24 4.3 Emission limit...................................................................................................25 4.4 Conducted emission data FCC 15.207...............................................................26 5. Radiated emission on the band edge FCC 15.249(C)...............................................32 FCC ID. : PEG36121-2 Report No.: EME-040211 Page 3 of 44 Summary of Tests 2.4GHz Cordless Phone -Model: 36122 FCC ID: PEG36121-2 Test Reference Results Conducted Emission of AC Power 15.207 Complies Radiated Emission test 15.249(c), 15.209 Complies FCC ID. : PEG36121-2 Report No.: EME-040211 Page 4 of 44 1. General information 1.1 Identification of the EUT Applicant : SENTON Enterprises Limited Product : 2.4GHz Cordless Phone Model No. : 36122 FCC ID. : PEG36121-2 Frequency Range : 2402.55~ 2475.95MHz Channel Number : 40 channels Frequency of Each Channel (Base) : Tx: 2402.55 ＋ 0.05k MHz, k=0~39 Rx: 2474.00＋0.05k MHz, k=0~39 Frequency of Each Channel (Handset) : Tx: 2474.00 ＋ 0.05k MHz, k=0~39 Rx: 2402.55 ＋ 0.05k MHz, k=0~39 Type of Modulation : FM Power Supply (Base) : 120Vac, 60Hz with adapter Rated Power (Handset) : 3.6Vdc battery Power Cord : N/A Sample Received : Mar. 12, 2004 Test Date(s) : Mar. 15, 2004 to Mar. 24, 2004 1.2 Additional information about the EUT The EUT is a Cordless Phone, it consists one handset, which operated at 2474MHz – 2475.95MHz and one base that operated at 2402.55 – 2404.50MHz. We verify that 36121 is series model to 36122 (EUT), because 36121 and 36122 use the same handset, and the difference is only on the circuit of charger of base unit. The EUT has two types of base, one of which can connect with RJ-11 port, and the other has charger function only. Under this condition, we define the base as charger 1 (with RJ-11 port) and charger 2 (charger function only) for EUT in this report. For detailed test items, please see table below: Radiated Emission Test Conduction test Test Item Model No. Below 1GHz Above 1Ghz 36121(Series model) ̧ ̧ ̧ 36122 (with charger 1) ̧ ̧ ̧ 36122 (with charger 2) ̧ ̧ We test the Radiated Emission for handset of EUT only. For more detail features, please refer to User's manual as file name “Installation guide.pdf” FCC ID. : PEG36121-2 Report No.: EME-040211 Page 5 of 44 1.3 Antenna description The EUT uses a permanently connected antenna. Antenna Gain : 0dBi Antenna Type : Copper Wire Connector Type : Soldering 1.4 Peripherals equipment Peripherals Manufacturer Product No. Serial No. FCC ID Phone Tentel K-903S 0514000941 FCC DoC Approved …

Text truncated - open the document above for the full version.

Photo 1: Conducted Emission Test Set-up Photo 2: Conducted Emission Test Set-up Photo 3: Conducted Emission Test Set-up Photo 4: Conducted Emission Test Set-up Photo 5: Conducted Emission Test Set-up Photo 6: Conducted Emission Test Set-up Photo 7: Conducted Emission Test Set-up Photo 8: Conducted Emission Test Set-up Photo 9: Conducted Emission Test Set-up

Photo 1: Radiated Emission Test Set-up (Base) Photo 2: Radiated Emission Test Set-up (Base) Photo 3: Radiated Emission Test Set-up (Base) Photo 4: Radiated Emission Test Set-up (Base) Photo 5: Radiated Emission Test Set-up (Base) Photo 6: Radiated Emission Test Set-up (Base) Photo 7: Radiated Emission Test Set-up (Handset)