PGK-P32NBUSB PC Camera

L&S LS-P32NB USB PC CAMERA Owner’s Manual FCC INFO RMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: -. Reorient or relocate the receiving antenna. -. Increase the separation between the equipment and receiver. -. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -. Consult the dealer or an experienced radio/TV technician for help. WA RN ING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment . Chapter 1. Installation 1. To install driver, click ‘LS-P32NB Driver Install’. 2. To continue, click PC-Camera Driver Install. Notice to take out the PC Camera from USB Port will appears. If you didn’t connect PC Camera to USB port, click ‘Yes’. After system is restarted, please connect the PC Camera to USB Port 3. To install CapVStudio, click ‘CapVStudio’. 4. Click ‘Next’. 5. Dialogue box for selecting folder to be installed will appear. You may use default folder, or click ‘Browser’ to specify other folder you want. 6. Type a new folder name, or select one from the existing Folder list. And click ‘Next’. 7. Dialogue box that notifies finishing the complete setup will appear. Click ‘Finish’ to finish installation. Chapter 2 Program Manual 1. Studio ON/OFF Click the button no.1) Studio ON/OFF to turn on or off the display window. 1).Studio ON/OFF 4) Option 7) Help 9) Viewing still image album 3) Capturing Still Image 2) Capturing Video 8) Viewing video album 5) Quality/Speed Control 10) Exit 6) Display windows size Display window Album window forMoving picure Album window forStill image 2. Capturing Video If you click the button no.2) Capturing Video, the controlling box will appear. Please input file name, enter capturing time duration (Default time : 5second), and check to capture audio. After finished the setting, click ‘Capture’ to start video capturing. After completed capturing video, captured video file (in the form of AVI file format) will be saved in the video album automatically (c:/program/lookandsay/capvstudio/video). 3. Capturing Still Image Click the button no.3) Capturing Still Image to capture still image. Select picture number and interval time to capture still image. After selected, click ‘Capture’. Captured image file will be saved in the still image album automatically (c:/program/lookandsay/capvstudio/album/picture). 4. Setting Options Click the button no.4) Option to set up the suitable configuration with the place using the PC camera. After finished setting, click ‘Application’. Enter the file name Set up capturing ti me d uration Check to record audio [ If LS_A32NB is connected to USB Port, please control the options as below ] Control zoom value to zoom in the screen. On screen zoomed in, you can turn the screen focus right and left / up and down. Set up auto exposure / auto white balance. After finished setting, click ‘Application’. [ If LS_A32AV is connected to USB Port, please control the options as below ] Select NTSC or PAL to capture and download video from the camcorder, VCR or DVD/VCD into the computers. Click ‘Sync’ for synchronous. After finished setting, click ‘Application’. 5. Setting Quality / Speed no.5) Quality/Speed Control The 3-level setup for the Quality/Speed is possible. Setup appropriate level what you desire. (As moving the button to the right, the quality gets better and the speed will be slower. Moving the button to the left, the quality gets worse and the speed will be gets faster.) 6. Setting Display Size no.6) Setting Display Size From the left, each button indicates the display window size of 160 X 120, 320 X 240, 640 x 480 pixel, respectively. The larger the window size is, the slower the displaying speed is. Adjust the window size suitable for the purpose what you want. 7. Help If there is any question about the program and camera, click the button no.7)Help to find the answer.. 8. Viewing Video Album Click the button no.8) Viewing video album to display video album. This window allows you to look the captured video briefly. Double click any one displayed on the video album to play captured video. (When clicking the right button of the mouse. The menu (such as View, Delete, and Save As) will be appeared. The menu ‘View’ is used to play the video, the menu ‘Delete’ is used to remove it, and the menu ‘Save As’ is used to copy the selected video to the other location.) 9. Viewing Album of Still Images Click the button no.9) Viewing Still Image to display still image album. The window allows you to look still images briefly. Double click any picture to see or edit (Need the image editing program). 10. Exit The button will stop the running program and exit it. 11. Sending Video/Picture by e-mail How to process sending video/picture by e-mail is as followings. 1. Start running e-mail program. 2. To attach the file, drag or select video or image files which you want to send. ( Note: Only for the video data, you must attach ‘initCodec’ and send it together that is needed to play the video by the receiver. But for sending the still images, no need attach ‘initCodec’. )

Block Diagram Block Diagram Block Diagram Block Diagram CMOS Image Sensor USB Connector USB Interface Compression Engine Zoom Engine MemoryInterface Serial Interface Video Interface 256K x 16 EDO DRAM

FCC ID. : PGK-P32NB ONETECH Testing & Evaluation Lab . IDENTIFICATION LABEL LOCATION: PROPOSED FCC ID LABEL The label of FCC ID. will be affixed to the bottom side of product. FCC ID : PGK-P32NB Model Name: LS-P32NB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations LOOK & SAY CO., LTD Made in Korea

FCC ID : PGK-P32NB Model Name: LS-P32NB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations

Page 1 of 13 FCC ID. : Error! Unknown docume nt prope rty name . File No. : Error! Unknown docume nt prope rty name . This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- K un, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . ELECTROMAGNETIC EMISSION COMPLIANCE REPORT Test report file number : E011R-033 Applicant : LOOK & SAY CO., LTD. Addre ss: 5F., Donghun Bldg., 733-22, Yeoksam-Dong, Kangnam-Gu, Seoul, 135-080, Korea Manufacturer : LOOK & SAY CO., LTD. Addre ss: 5F., Donghun Bldg., 733-22, Yeoksam-Dong, Kangnam-Gu, Seoul, 135-080, Korea Type of Equipme nt : USB PC CAMERA (Pe riphe ral De vice for Class B Computing De vice ) FCC ID: PGK-P32NB Model / Type No. : LS-P32NB Se rial numbe r: N/ A Total page of Report: 13 pages (including this page) Date of Incoming: December 09, 2000 Date of Issuing : January 26, 2001 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART B, SECTION 15.101 This test report contains only the results of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. Prepared by: Approved by: G. W. Lee/ Ass. Chief EngineerS. S. Hong / Managing Director EMC Dept.ONETECH Corp. ONETECH Corp. Page 2 of 13 FCC ID. : Error! Unknown docume nt prope rty name . File No. : Error! Unknown docume nt prope rty name . This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon- Gu, Seongnam- C ity, K yunggi- Do, 462-121, Korea (TEL: 82- 31-746-8500 FAX: 82-31-746-8700 ) EM C Te s ting De pt : 426-1 Daessangryung- Ri, C howol- Myun, K wangju- K un, K yunggi- Do 464-860 Korea. (TEL: 82- 31-765-8289 FAX: 82-31-766-2904) ONETECH Testing & Evaluation Lab . CONTENTS Page 1. VERIFICATION OF COMPLIANCE ................................................................................................................ 3 2. GENERAL INFORMATION .................................................................................................................................. 4 2.1 P RODUCT D ESCRIPTION ............................................................................................................................................. 4 2.2 R ELATED S UBMITTAL ( S ) / G RANT ( S ) ....................................................................................................................... 4 2.3 T EST S YSTEM D ETAILS .............................................................................................................................................. 5 2.4 T EST M ETHODOLOGY ................................................................................................................................................ 5 2.5 T EST F ACILITY ............................................................................................................................................................ 5 3. SYSTEM TEST CONFIGURATION ................................................................................................................... 6 3.1 J USTIFICATION ............................................................................................................................................................. 6 3.2 EUT EXERCISE S OFTWARE ........................................................................................................................................ 6 3.3 C ABLE D ESCRIPTION .................................................................................................................................................. 6 3.4 N OISE S UPPRESSION P ARTS ON C ABLE ................................................................................................................... 7 3.5 E QUIPMENT M ODIFICATIONS .................................................................................................................................... 7 3.6 C ONFIGURATION OF T EST S YSTEM .......................................................................................................................... 7 4. PRELIMINARY TEST .............................................................................................................................................. 8 4.1 AC P OWER LINE C ONDUCTED E MISSION T EST ..................................................................................................... 8 4.2 R ADIAT ED E MISSION T EST ........................................................................................................................................ 8 5. FINAL RESULT OF MEASURMENT ............................................................................................................... 9 5.1 C ONDUCTED E MISSION T EST .................................................................................................................................... 9 5.2 R ADIAT ED E MISSION T EST ...................................................................................................................................... 10 6. FIELD STRENGTH CALCULATION ............................................................................................................. 14 7. LIST OF TEST EQUIPMENT ............................................................................................................................. 15 Page 3 of 13 FCC ID. : Error! Unknown docume nt prope rty name . File No. : Error! Unknown docume nt prope rty name . This report shall not be reproduced except in full without our written approval.EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdae…

Text truncated - open the document above for the full version.

Conducted Emission Test Radiated Emission Test