PJ7-N27-W3Cat.M1 Module

Product Specifications Issue 1.0 Date 2020-04-21 N27 Product Specifications Copyright Copyright © Neoway Technology Co., Ltd i Copyright © Neoway Technology Co., Ltd 2019. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Neoway Technology Co., Ltd. is the trademark of Neoway Technology Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice This document provides a guide for users to use N27. This document is intended for system engineers (SEs), development engineers, and test engineers. THIS GUIDE PROVIDES INSTRUCTIONS FOR CUSTOMERS TO DESIGN THEIR APPLICATIONS. PLEASE FOLLOW THE RULES AND PARAMETERS IN THIS GUIDE TO DESIGN AND COMMISSION. NEOWAY WILL NOT TAKE ANY RESPONSIBILITY OF BODILY HURT OR ASSET LOSS CAUSED BY IMPROPER OPERATIONS. THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE DUE TO PRODUCT VERSION UPDATE OR OTHER REASONS. EVERY EFFORT HAS BEEN MADE IN PREPARATION OF THIS DOCUMENT TO ENSURE ACCURACY OF THE CONTENTS, BUT ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS DOCUMENT DO NOT CONSTITUTE A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. Neoway provides customers complete technical support. If you have any question, please contact your account manager or email to the following email addresses: [email protected] [email protected] Website: http://www.neoway.com N27 Product Specifications Contents Copyright © Neoway Technology Co., Ltd ii Contents 1 About N27 ................................................................................................ 8 1.1 Product Overview ......................................................................................................................... 8 1.2 Block Diagram .............................................................................................................................. 9 1.3 Basic Features ........................................................................................................................... 10 2 Compliant Standards .............................................................................. 12 3 Module Pins ........................................................................................... 13 3.1 Pad Layout ................................................................................................................................. 13 3.2 Module Apperance ..................................................................................................................... 14 4 Electric Features and Reliability ............................................................. 15 4.1 Electric Features ........................................................................................................................ 15 4.2 Temperature Features ................................................................................................................ 16 4.3 ESD Protection ........................................................................................................................... 16 5 RF Features ........................................................................................... 17 5.1 Operating Bands ........................................................................................................................ 17 5.2 TX Power and RX Sensitivity ..................................................................................................... 18 5.3 GNSS Feature ............................................................................................................................ 20 6 Mechanical Features .............................................................................. 22 6.1 Dimensions................................................................................................................................. 22 6.2 Label ........................................................................................................................................... 23 6.3 Packing ....................................................................................................................................... 23 6.3.1 Reel Package .................................................................................................................... 23 6.3.2 Moisture ............................................................................................................................. 25 7 Mounting N27 onto Application PCB ....................................................... 26 7.1 Bottom Dimensions .................................................................................................................... 26 7.2 Application Foot Print ................................................................................................................. 27 7.3 Stencil ......................................................................................................................................... 27 7.4 Solder Paste ............................................................................................................................... 27 7.5 SMT Furnace Temperature Curve .............................................................................................. 28 8 Safety Recommendations ...................................................................... 29 Conformity and Compliance ................................................................... 30 A.1 Approvals ................................................................................................................................... 30 A.2 Chinese Notice .......................................................................................................................... 30 A.2.1 CCC Class A Digital Device Notice ................................................................................... 30 A.2.2 Environmental Protection Notice ....…

Text truncated - open the document above for the full version.

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen51800, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 1 Report Version 1 Reference No.: 191122W002 FCC ID: PJ7-N27-W3 HOTOGRAPHS OF THE EUT

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen51800, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 1 Report Version 1 Reference No.: 191122W002 FCC ID: PJ7-N27-W3 PHOTOGRAPHS OF THE EUT

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 8 Report Version 1 Test Report No.: SA191122W002 RF EXPOSURE REPORT Applicant: Shenzhen Neoway Technology Co.,Ltd. Address: 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Manufacturer or Supplier: Shenzhen Neoway Technology Co.,Ltd. Address: 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Product: Cat.M1 Module Brand Name: neoway Model Name: N27-W3 FCC ID: PJ7-N27-W3 Date of tests: Nov. 23, 2019 ~ Jan. 09, 2020 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: IEEE C95.1 FCC Part 2.1091 KDB 447498 D01 General RF Exposure Guidance v06 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Alex Chen Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Jan. 13, 2020 Date: Jan. 13, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 8 Report Version 1 Test Report No.: SA191122W002 TABLE OF CONTENTS RF EXPOSURE REPORT ............................................................................................. 1 RELEASE CONTROL RECORD .................................................................................. 3 1 GENERAL INFORMATION ............................................................................ 4 1.1 GENERAL DESCRIPTION OF EUT ................................................................... 4 2 RF EXPOSURE .............................................................................................. 6 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................ 6 2.2 MPE CALCULATION FORMULA ....................................................................... 6 2.3 CLASSIFICATION .............................................................................................. 7 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ..................... 8 2.5 CONCLUSION OF SIMULTANEOUS TRANSMITTERError! Bookmark not defined. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 3 of 8 Report Version 1 Test Report No.: SA191122W002 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA191122W002 Original release Jan. 13, 2020 BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 4 of 8 Report Version 1 Test Report No.: SA191122W002 1 GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF EUT PRODUCT Cat.M1 Module MODEL NAME neoway NOMINAL VOLTAGE N27-W3 OPERATING TEMPERATURE RANGE Vmin=3.1Vdc, Vnor=3.6Vdc, Vmax=4.3Vdc MODULATION TYPE GPS/ GLONASS / BDS/ GALILEO BPSK GSM/GPRS/ED GE GMSK, 8PSK LTE CAT-M1 QPSK/16QAM OPERATING FREQUENCY GPS/ GLONASS/ BDS/ GALILEO 1559MHz ~ 1610MHz GSM 824.2MHz ~ 848.8MHz (FOR GSM 850) 1850.2MHz ~ 1909.8MHz (FOR GSM 1900) LTE CAT-M1 1850.7MHz ~ 1909.3MHz (FOR LTE Band2) 1710.7MHz ~ 1754.3MHz (FOR LTE Band4) 824.7MHz ~ 848.3MHz (FOR LTE Band5) 699.7MHz ~ 715.3MHz (FOR LTE Band12) 779.5MHz ~ 784.5MHz (FOR LTE Band13) 790.5MHz ~ 795.5MHz (FOR LTE Band14) 1850.7MHz ~ 1914.3MHz (FOR LTE Band25) 814.7MHz ~ 848.3MHz (FOR LTE Band26) 1710.7MHz ~ 1779.3MHz (FOR LTE Band66) 700.5MHz -713.5MHz (FOR LTE Band85) ANTENNA GAIN GSM 850 Monopole antenna with 1dBi gain GSM 1900 Monopole antenna with 2dBi gain LTE Band 2 Monopole antenna with 2dBi gain LTE Band 4 Monopole Antenna with 2dBi gain LTE Band 5 Monopole antenna with 1dBi gain LTE Band 12 Monopole Antenna with 1dBi gain LTE Band 13 Monopole Antenna with 1dBi gain LTE Band 14…

Text truncated - open the document above for the full version.

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 146 Test Report No.: RF191122W002-1 FCC TEST REPORT (PART 22) Applicant: Shenzhen Neoway Technology Co.,Ltd. Address: 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Manufacturer or Supplier: Shenzhen Neoway Technology Co.,Ltd. Address: 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Product: Cat.M1 Module Brand Name: neoway Model Name: N27-W3 FCC ID: PJ7-N27-W3 Date of tests: Nov. 23, 2019 ~ Jan. 09, 2020 The tests have been carried out according to the requirements of the following standard: FCC PART 22, Subpart H FCC Part 2 ANSI/TIA/EIA-603-D ANSI C63.26-2015 ANSI/TIA/EIA-603-E CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Alex Chen Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Jan. 13, 2020 Date: Jan. 13, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 146 Test Report No.: RF191122W002-1 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................... 4 1 SUMMARY OF TEST RESULTS ............................................................................................................ 5 1.1 MEASUREMENT UNCERTAINTY ............................................................................................... 5 1.2 TEST SITE AND INSTRUMENTS ................................................................................................ 6 2 GENERAL INFORMATION ................................ ................................................................................... 7 2.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 2.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 10 2.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 2.4 TEST ITEM AND TEST CONFIGURATION................................................................................ 11 2.5 EUT OPERATING CONDITIONS ............................................................................................... 16 2.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 17 3 TEST TYPES AND RESULTS ............................................................................................................. 18 3.1 OUTPUT POWER MEASUREMENT ......................................................................................... 18 3.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ............................................................... 18 3.1.2 TEST PROCEDURES ........................................................................................................ 18 3.1.3 TEST SETUP ...................................................................................................................... 19 3.1.4 TEST RESULTS ................................................................................................................. 19 3.2 FREQUENCY STABILITY MEASUREMENT ............................................................................. 30 3.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .................................................. 30 3.2.2 TEST PROCEDURE ........................................................................................................... 30 3.2.3 TEST SETUP ...................................................................................................................... 30 3.2.4 TEST RESULTS ................................................................................................................. 31 3.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................................ 42 3.3.1 TEST PROCEDURES .................…

Text truncated - open the document above for the full version.

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 1 of 172 Test Report No.: RF191122W002-2 FCC TEST REPORT (PART 24) Applicant: Shenzhen Neoway Technology Co.,Ltd. Address: 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Manufacturer or Supplier Shenzhen Neoway Technology Co.,Ltd. Address 4F-2#,Lianjian Science&Industry Park, Huarong Road, Dalang,Longhua District, Shenzhen City, Guangdong Province, P.R.China Product Cat.M1 Module Brand Name neoway Model Name N27-W3 FCC ID PJ7-N27-W3 Date of tests Nov. 23, 2019 ~ Jan. 09, 2020 The tests have been carried out according to the requirements of the following standard: FCC PART 24, Subpart E FCC PART 2 ANSI/TIA/EIA-603-D ANSI/TIA/EIA-603-E ANSI C63.26-2015 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Alex Chen Engineer / Mobile Department Approved by Luke Lu Manager / Mobile Department Date: Jan. 14, 2020 Date: Jan. 14, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 2 of 172 Test Report No.: RF191122W002-2 TABLE OF CONTENTS RELEASE CONTROL RECORD ....................................................................................................... 4 1 SUMMARY OF TEST RESULTS .................................................................................................. 5 1.1 ME ASUREMENT UNCERTAINTY .......................................................................................... 5 1.2 TEST SITE AND INST RUMENTS ........................................................................................... 6 2 GENERAL INFORMATION .......................................................................................................... 7 2.1 GENERAL DESCRIPTION OF EUT ........................................................................................ 7 2.2 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 11 2.3 DESCRIPTION OF SUPPORT UNITS .................................................................................. 12 2.4 TEST ITEM AND TEST CONFIGURATION .......................................................................... 12 2.5 EUT OPERATING CONDITIONS ........................................................................................ 17 2.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ..................................................... 17 3 TEST TYPES AND RESULTS .................................................................................................... 18 3.1 OUTPUT POWER MEASUREMENT .................................................................................... 18 3.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ......................................................... 18 3.1.2 TEST PROCEDURES ................................................................................................... 18 3.1. 3 TEST SETUP ................................................................................................................. 18 3.1.4 TEST RESULTS ............................................................................................................... 19 3.2 FREQUENCY STABILITY MEASUREMENT ........................................................................ 33 3.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT ............................................ 33 3.2.2 TEST PROCEDURE...................................................................................................... 33 3.2.3 TEST SETUP ................................................................................................................. 33 3.2.4 TEST RESULTS ............................................................................................................ 34 3.3 OCCUPIED BANDWIDTH MEASUREMENT ....................................................................... 48 3.3.1 TEST PROCEDURES ................................................................................................... 48 3.3.2 TEST SETUP .....................................…

Text truncated - open the document above for the full version.

BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 100 of 172 Test Report No.: RF191122W002-2 5MHz / QPSK CHANNEL 26065 CHANNEL 26365 FREQUENCY RANGE : 30MHz~20.0GHz FREQUENCY RANGE : 30MHz~20.0GHz CHANNEL 26665 FREQUENCY RANGE : 30MHz~20.0GHz BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 101 of 172 Test Report No.: RF191122W002-2 10MHz / QPSK CHANNEL 26090 CHANNEL 26365 FREQUENCY RANGE : 30MHz~20.0GHz FREQUENCY RANGE : 30MHz~20.0GHz CHANNEL 26640 FREQUENCY RANGE : 30MHz~20.0GHz BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 102 of 172 Test Report No.: RF191122W002-2 15MHz / QPSK CHANNEL 26115 CHANNEL 26365 FREQUENCY RANGE : 30MHz~20.0GHz FREQUENCY RANGE : 30MHz~20.0GHz CHANNEL 26615 FREQUENCY RANGE : 30MHz~20.0GHz BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 103 of 172 Test Report No.: RF191122W002-2 20MHz / QPSK CHANNEL 26140 CHANNEL 26365 FREQUENCY RANGE : 30MHz~20.0GHz FREQUENCY RANGE : 30MHz~20.0GHz CHANNEL 26590 FREQUENCY RANGE : 30MHz~20.0GHz BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 104 of 172 Test Report No.: RF191122W002-2 3.6 RADIATED EMISSION MEASUREMENT 3.6.1 LIMITS OF RADIATED EMISSION MEASUREMENT The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit equal to –13dBm. 3.6.2 TEST PROCEDURES a. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. b. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value “ of step a. Record the power level of S.G c. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1MHz/3MHz. 3.6.3 DEVIATION FROM TEST STANDARD No deviation BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 105 of 172 Test Report No.: RF191122W002-2 3.6.4 TEST SETUP < Frequency Range 30MHz~1GHz > <Frequency Range above 1GHz> Note: Above 1G is a directional antenna depends on the EUT height and the antenna 3dB beamwidth both, refer to section 7.3 of CISPR 16- 2-3. For the actual test configuration, please refer to the attached file (Test Setup Photo). Ant. Tower 1-4m Turn Table EUT Ground Plane Spectrum 0.8m 3m 3m 1-4m* Bore Sight Turn Table EUT& Support Units Ground Plane Test Receiver 0.8m Absorber Ant. Tower Pre-amplifier Variable BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Area, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China Tel: +86 755 8869 6566 Fax: +86 755 8869 6577 Email: [email protected] Page 106 of 172 Test Report No.: RF191122W002-2 3.6.5 TEST RESULTS BELOW 1GHz WORST-CASE DATA 30 MHz – 1GHz data: LTE CAT-M1 Band 2 CHANNEL BANDWIDTH: 10MHz / QPSK MODE TX channel 18900 FREQUENCY RANGE Below 1000MHz ENVIRONMENTAL CONDITIONS 23deg. C, 70%RH INPUT POWER DC 5V from adapter TESTED BY Tony Xiong ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M BV 7Layers Communications Technology (Shenzhen) Co. Ltd No.B102, Dazu Chuangxin Mansion, North of Beihuan Avenue, North Ar…

Text truncated - open the document above for the full version.