PL4CT170117-inch LCD Monitor

TABLE OF CONTENTS ADJUSTING YOUR LCD MONITOR -------------- 2 • General safety precautions ..................................... 2 • Unpacking your monitor ....................................... 5 • Viewing angle ................................................... 6 • Connecting your monitor ................................. 7 • User controls ...................................................... 8 • OSD Functions and adjustments ................................. 9 • Menu adjustments ................................................ 10 • Refining the picture ............................................. 12 APPENDIX ----------------------------------- - 13 • Power management function ................................... 13 • Video input terminal ........................................... 13 • Display modes ................................................. 14 • Troubleshooting ................................................ 15 • Specifications ................................................... 17 Adjusting your lcd monitor 2 General safety precautions This Monitor has been engineered and manufactured to assure your safety. Please read this manual and comply with the warnings and the procedures to avoid any serious electrical shock and other serious damage. 1. 2. 3. 4. Do not place anything heavy, wet or magnetic on the monitor or power cord. Do not cover the ventilation openings nor touch them with metallic or flammable material. High temperature can cause troubles. Avoid operating the monitor in extreme heat, humidity or dusty areas. Extreme temperature may cause discoloration or damages. Ambient Temperature : 0C ~ 40C Do not use a solvent, such as benzene, to clean the monitor to prevent any damages to the LCD surface. Do not use fine tools such as a pin or a pencil near the monitor to prevent any scratch to the LCD surface. Adjusting your lcd monitor 3 5. 6. 7. 8. Place the monitor on a flat surface to prevent it from falling. Do not apply any mechanical shocks to the machine. Install it in a well-ventilated area or secure enough space for ventilation. Turn the monitor off before connecting it to the power outlet. Adjusting your lcd monitor 4 CAUTION : RISK OF ELECTRIC SHOCK, DO NOT OPEN 9. 10. 11. Make sure that the power cord and the other cords are properly connected. Overloaded AC outlets and extension cords are dangerous. Also, the frayed power cords and the broken plugs may cause electric shock or fire. Do not open the monitor. There are no user-serviceable components inside. There is a risk of exposure to high- voltage electricity inside, even when power is turned off. If the display monitor does not operate properly, unplug the power cord and contact your dealer. Handling the electrical equipment carelessly will cause a serious electrical shock and other hazards. Adjusting your lcd monitor 5 Unpacking your monitor Please make sure the following items are included with your monitor. If you find that any of these items are missing or appear damaged, contact your dealer immediately. The power cord can be different depending upon different voltage areas. Adjusting your lcd monitor 6 Viewing angle Your monitor was designed to allow you to adjust it to a comfortable viewing angle. The viewing angle can be adjusted 2? to 90? forward and backward respectively as indicated by the arrow marks below. ? ? Caution Basically when the monitor is in used, please make sure that the monitor is at the safe angle less then 45 degrees. Adjusting your lcd monitor 7 Connecting your monitor Be sure to turn the computer off before connecting the monitor ? Connect the power adaptor cord to the monitor and then to the power supply. ? After powering on the computer, adjust the display using the various controls provided. For further information on the installation procedure, please refer to the operating guide of the computer being used. Adjusting your lcd monitor 8 User controls Front control buttons AUTO MENU SELECT DOWN UP LED POWER No. Key name Description 1 AUTO Activates the auto adjustment function. 2 MENU Opens the OSD menu. 3 SELECT Selects the main menu items and sub-menu items. 4 Moves to the lower menu item or sub-menu item. Decreases the value of the parameter. 5 Moves to the upper menu item or sub-menu item. Increases the value of the parameter. 6 LED Indicates the status of the monitor. • Green : Normal operation. • Blinking : Power saving mode or disconnected signal cable. 7 POWER Turns on/off the monitor. Adjusting your lcd monitor 9 OSD Functions and adjustments Main menu and control selection Press the MENU key to access the main menu. Place the color box on the control icon you wish to adjust by pressing using the or key. Press the SELECT key to access the control. Exit menu Press the MENU key to exit the OSD screen. Auto exit The OSD menu will disappear automatically after a few second of inactivity. Auto save The monitor automatically saves the new values when OSD closes. Normal mode When the video signal is working in normal display mode, power LED is lit green. DPMS mode The LED indicates different status when this unit operates in different power-saving modes. Out of Range When an unsuitable signal is detected, the OSD displays an Out of Range message. Adjusting your lcd monitor 10 Menu adjustments Icon Settings and sub-menus Description BRIGHTNESS • IMAGE BRIGHTNESS CONTROL CONTRAST • IMAGE CONTRAST CONTROL AUTO-ADJUST • AUTOMATICALLY IMAGE SHARPNESS CONTROL AND NOISE ELIMINATION. POSITION • H&V POSITION, CLOCK & PHASE CONTROL. H-Position • IMAGE H-POSITION CONTROL V-Position • IMAGE V-POSITION CONTROL Phase • IMAGE WIDTH CONTROL Clock • IMAGE SHARPNESS CONTROL AND NOISE ELIMINATION Adjusting your lcd monitor 11 Icon Settings and sub-menus Description COLOR • WHITE BALANCE CONTROL Preset Color 1 • ONE OF FACTORY SET OF WHITE BALANCE Preset Color 2 • ONE OF FACTORY SET OF WHITE BALANCE User Color • USER CAN CHANGE THE WHITE LEVEL LANGUAGE • LANGUAGE SELECTION OSD ADJUST • OSD WIN…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE :FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 3.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.2 Label Location Photos

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. PRODUCT COMPLIANCE TEAM SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATION FCC Rule Part(s): Part 15 & 2; ET Docket 95-19 Classification: FCC Class B Peripheral Device (JBP) Standard(s): FCC Class B: 1998 (CISPR 22) Equipment(EUT) Type: 17” LCD Monitor Max Resolution: 1280 X 1024 Non-interlaced (@80KHz/ 75Hz) Port/ Connector(s) 17pin D-sub VGA connector The device bearing the trade name and model specified above, has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992.(See Test Report if any modifications were made for compliance) I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. HYUNDAI C-Tech. certifies that no party to application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse of 1988,21 U.S.C.853(a). Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. EMC LAB. PL4CT1701 CT1701 Manufacture; CORNEA TECHNOLOGY CO ., Ltd. Rm#201, Na Dong,Shilla-Technoville,39-3 Dong-Dong, Kunpo-Shi, Kyunggi-Do, Korea CORNEA : 0006-5809-55 Date of Issue: FEBRUARY 20, 2002 Test Report No.: HCT-F02-0204 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : MODEL / TYPE : REPORT NO : HCT-F02-0204 FCC ID :PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNGKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 TABLE OF CONTENTS PAGE 1. GENERAL INFORMATION........................................................................................ 1.1 Product Description........................................................................................... 1.2 Related submittal(s)/Grant(s).......................................................................... . 1.3 Tested System Details........................................................................................ 1.4 Test Methodology.............................................................................................. 1.5 Test Facility..................................................................................................... 2. SYSTEM TEST CONFIGURATION............................................................................. 2.1 Justification...................................................................................................... 2.2 EUT Exercise Software..................................................................................... 2.3 Cable Description............................................................................................. 2.4 Noise Suppression Parts on Cable..................................................................... 2.5 Equipment Modifications................................................................................. 2.6 Configuration of Tested System......................................................................... 3. PRELIMINARY TESTS.............................................................................................. 3.1 Power line Conducted Emissions Tests............................................................. 3.2 Radiated Emissions Tests................................................................................. 4. FINAL CONDUCTED AND RADIATED EMISSION TESTS SUMMARY....................... 4.1 Conducted Emission Tests............................................................................... 4.2 Conducted Emission Tests............................................................................... 4.2 Radiated Emission Tests.................................................................................. 5. FIELD STRENGTH CALCULATION........................................................................... 6. LIST OF TEST EQUIPMENT ..................................................................................... ATTACHMENT A ......................................................ID Label / Location Info. ATTACHMENT B.......................................................External Photos. ATTACHMENT C ......................................................Block Diagram.. ATTACHMENT D ......................................................Test Setup Photos. ATTACHMENT E ......................................................User’s Manual. ATTACHMENT F ......................................................Internal Photos. 2 3 3 3 4 4 4 5 5 5 6 6 7 8 9 9 9 10 11 12 13 14 REPORT NO : HCT-F02-0204 FCC ID :PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNGKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 1. GENERAL INFORMATION 1.1 Product Description The CORNEA TECHNOLOGY CO., LTD. Model CT1701 (referred to as the EUT in this report) is a 17"LCD Monitor with HOR. Freq. 80KHz (Max) and Resolution of 1280 X 1024 (Non-Interlaced). Product specification information described herein was obtained from product data sheet or user's manual. CHASSIS TYPE PLASTIC LIST OF EACH OSC. OR XTAL. FREQ.(FREQ. 1MHz) 12MHz , 14.318MHz POWER REQUIREMENT AC 100 - 240 V, 50/60Hz Input 12V, 5A Max DC Output NUMBER OF LAYERS MAIN BOARD 4 LAYER OSD BOARD 1 LAYER POWER BOARD 1 LAYER INVERTER BOARD 2 LAYER MAX. RESOLUTION 1280 X 1024 NON-INTERLACED (@80KHz/ 75Hz) H-SYNC FREQUENCY RANGE 31.5KHz 80KHz V-SYNC FREQUENCY RANGE 56Hz 75Hz LCD TYPE 17" ( LCD Type :HT17E11-200, HYUNDAI) 1.2 Related Submittal(s) / Grant(s)…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr [RADIATED MEASUREMENT PHOTO] REPORT NO : HCT-F02-0204 FCC ID : PL4CT1701 DATE : FEBRUARY 20, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr .