PL6-2500-BTS3-R1Base Transceiver Station

Page 1 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt 2496–2690 MHz BTS-MX 100-240 VACREGULATORY & ID LabelNon-RoHS BTS-MXRoHS label Made in U.S.A. Model No. 2.5-2.6-BTS3A-R1Part No. 92-92600-00 Input: 100-240 VAC 50/60Hz 10A Freq. Range: 2496-2690 MHz 2.72 +/-.03 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) 40-00325-01R Navini Networks ® Ripwave MX BTS 3.58 +/-.03 Part No. 40-00325-01R FCC ID: PL6-2500-BTS3-R1 Page 2 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt 2496–2690 MHz BTS-MX 100-240 VACREGULATORY & ID LabelRoHS BTS-MXRoHS label Made in U.S.A. Model No. 2.5-2.6-BTS3A-R1Part No. 92-92600-00R Input: 100-240 VAC 50/60Hz 10A Freq. Range: 2496-2690 MHz 2.72 +/-.03 40-00325-02R Navini Networks ® Ripwave MX BTS 3.58 +/-.03 Part No. 40-00325-02R FCC ID: PL6-2500-BTS3-R1 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) Page 3 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt Made in U.S.A. Model No. 2.5-2.6-BTS3T-R1Part No. 92-92624-00 Input: +24 VDC 40A Freq. Range: 2496-2690 MHz 3.58 +/-.03 40-00325-03R 2496–2690 MHz BTS-MX + 24 VDCREGULATORY & ID LabelNon-RoHS BTS-MXRoHS label 2.72 +/-.03 Part No. 40-00325-03R Navini Networks ® Ripwave MX BTS FCC ID: PL6-2500-BTS3-R1 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) Page 4 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt Made in U.S.A. Model No. 2.5-2.6-BTS3T-R1Part No. 92-92624-00R Input: +24 VDC 40A Freq. Range: 2496-2690 MHz 3.58 +/-.03 40-00325-04R 2496–2690 MHz BTS-MX + 24 VDCREGULATORY & ID LabelRoHS BTS-MXRoHS label 2.72 +/-.03 Part No. 40-00325-04R Navini Networks ® Ripwave MX BTS FCC ID: PL6-2500-BTS3-R1 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) Page 5 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt Made in U.S.A. Model No. 2.5-2.6-BTS3F-R1Part No. 92-92648-00 Input: – 48 VDC 30A Freq. Range: 2496-2690 MHz 40-00325-05R 2496–2690 MHz BTS-MX –48 VDCREGULATORY & ID LabelNon-RoHS BTS-MX RoHS label 2.72 +/-.03 3.58 +/-.03 Part No. 40-00325-05R Navini Networks ® Ripwave MX BTS FCC ID: PL6-2500-BTS3-R1 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) Page 6 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. © 2006 Navini Networks Description: LABEL: Regulatory & I.D. for: BTS, RFS, FI LTER (All Freq.) Document Ref: Original is 67-00333-00 Rev. B, May 10, 2006 060616a_For Larry_Navini_BTS-MX_RFS_FILTER_Labels_67-00333-00B.ppt Made in U.S.A. Model No. 2.5-2.6-BTS3F-R1Part No. 92-92648-00R Input: – 48 VDC 30A Freq. Range: 2496-2690 MHz 40-00325-06R 2496–2690 MHz BTS-MX –48 VDCREGULATORY & ID LabelRoHS BTS-MX RoHS label 2.72 +/-.03 3.58 +/-.03 Part No. 40-00325-06R Navini Networks ® Ripwave MX BTS FCC ID: PL6-2500-BTS3-R1 CLEAR WINDOW FOR NAVINI BAR CODE (1.5000 X .375, SIZE OF LABEL) Page 7 of 151 Proprietary Information: The information contained in this docum ent is the property of Navini Networks. Except as specifically authorized in writing by Navini Networks, the holder of this document shall keep all info rmation c…

Text truncated - open the document above for the full version.

Base Station Output Power Tune up procedures; The BTS transmitter output power is tuned and set during BTS calibration, one of the standard steps in BTS installation & commissioning procedure. BTS tunes its output power by varying the gain of the transmitter chain. For each TX gain setting, the transmitter output power is measured through the calibration cable and compared with the maximum output power setting at EMS (1 watt). When the output power reaches the EMS setting, the TX output power tuning will be terminated and the corresponding TX gain will be kept un-changed. Description of all active components in the system The Base station consists of a RF shelf and a digital shelf. RF shelf contains 8 RF modules and channel filters. Digital shelf contains two synthesizer modules (one active, one spare for redundancy), two IF modules, two channel processor modules, two modulator/demodulator modules, and two communication modules (one active, one spare for redundancy). - RF module: RF module basically does two functions: Frequency conversions and high power amplification during transmitter period. It works in TDD mode. During receive period, it amplifies and converts the received RF signal to IF signal. During transmission period, it converts the IF signal received from IF module and amplifies the RF signal to a high level set by EMS during I&C. Some filtering is carried out at RF module as well. - IF module: During the receive period, the IF signal received from RF module will be quadrature demodulated into base band signal and sent to channel processor module. During the transmitter period, the base band signal from channel processor module will be quadrature modulated into IF signal. IF module provides the majority of the filtering required for receiver selectivity. - Channel processor module: Both the up and down link beam forming (antenna array) are performed at channel processor modules. It also performs the multi-carrier channelization during uplink and summation during the downlink. - Modulation/Demodulation module: The modulation/demodulation modules perform modulation during down link period and demodulation during uplink period. - Communication module: It provides the network interference between network backhaul and Navini BTS. - Synthesizer module: It provides all the frequencies required for IF and RF conversions. - Channel Filter: 10MHz Bandwidth. It rejects transmitter out-of- band noise for FCC out-of-band emission compliance. Operational description The BTS operates in TDD mode. During the transmission period, the data received from network will have the following sequence of the operations: format conversion at communication module, modulation at modulation/demodulation module, summation (multi-carriers) and beam forming (antenna array) at channelization module, frequency conversion (from base band to IF) at IF module, and frequency conversion (from IF to RF) and amplification at RF module. During the receive period, the data received from the antenna will have the following sequence of the operations: amplification (small signal) and frequency conversion (from RF to IF) at RF module, frequency conversion (from base band to IF) at IF module, beam forming (antenna array) and channelization (multi- carriers) at channelization module, demodulation at modulation/demodulation module, and format conversion at communication module.

Nemko Test Report: 6L0170RUS1 rev 1 Applicant: Navini Networks 2240 Campbell Creek Blvd. Suite 110 Richardson, TX 75082 Equipment Under Test: 2.5-2.6-BTS3A-R1 2.5-2.6-BTS3T-R1 2.5-2.6-BTS3F-R1 In Accordance With: FCC PART 27, Subpart C Broadband Radio Service and Educational Broadband Service Tested By: Nemko USA Inc. 802 N. Kealy Lewisville, Texas 75057-3136 Authorized By: David Light, Senior Wireless Engineer Date: 14 June 2006 Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 2 of 58 Table of Contents Section 1. Summary of Test Results ....................................................................................... 3 Section 2. General Equipment Specification .......................................................................... 5 Section 3. RF Power Output ................................................................................................... 7 Section 4. Occupied Bandwidth.............................................................................................. 8 Section 5. Spurious Emissions at Antenna Terminals .......................................................... 15 Section 6. Field Strength of Spurious ................................................................................... 27 Section 7. Frequency Stability .............................................................................................. 29 Section 8. Test Equipment List ............................................................................................. 48 ANNEX A - TEST DETAILS ...................................................................................................... 49 ANNEX B - TEST DIAGRAMS.................................................................................................. 55 Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 3 of 58 Section 1. Summary of Test Results Manufacturer: Navini Networks Model No.: 2.5-2.6-BTS3A-R1 2.5-2.6-BTS3T-R1 2.5-2.6-BTS3F-R1 Serial No.: None General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 27, Subpart M. New Submission Production Unit Class II Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. NONE Nemko USA Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 4 of 58 Summary Of Test Data NAME OF TEST PARA. NO.SPEC. LIMIT RESULT RF Power Output 2.1046 33 dBW + 10log(X/Y) dBW Complies Occupied Bandwidth 2.1049 5.5 MHz Complies Spurious Emissions @ Antenna Terminals 2.1051 -13 dBm Complies Field Strength of Spurious Radiation 2.1053 -13 dBm Complies Frequency Stability 2.1055 Must remain within authorized bandwidth Complies Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 5 of 58 Section 2. General Equipment Specification Power Supply 120 Vac Frequency Range 2503 to 2683.5 MHz Type(s) of Modulation: F3E (Voice) F1D F2D W7D F9W Emission Designator 5M00F9W and 4M76W7D Output Impedance: 50 ohms RF Power Output: 33 dBm Conducted Duty Cycle: 50% TDD Selection Of Operating Frequency: Not selectable by operator Power Output Adjustment Capability: Not selectable by operator Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 6 of 58 Description of EUT 2.5-2.6-BTS3A-R1 2.5-2.6-BTS3T-R1 2.5-2.6-BTS3F-R1 Is a Point to Multi point base station. System Diagram Refer to separate exhibit. Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 7 of 58 Section 3. RF Power Output NAME OF TEST: RF Power Output PARA. NO.: 2.1046 TESTED BY: Kevin Rose DATE: 05/28/2006 Test Results: Complies Measurement Data: See Tables. Test Equipment: 1659, 1055, 1081, 1474, 1471, 2071, 2072. MAX RF POWER OUTPUT Navini Mode Freq Power (dBm) Power (Watts) 2.503 33.2 2 2.590 33.0 2 2.6835 33.3 2 OFDM Mode Freq Power (dBm) Power (Watts) 2.503 33.1 2 2.590 33.2 2 2.6835 33.2 2 Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 8 of 58 Section 4. Occupied Bandwidth NAME OF TEST: Occupied Bandwidth PARA. NO.: 2.1049 TESTED BY: Kevin Rose DATE: 05/27/2006 Test Results: Complies Measurement Data: See attached plots. Test Equipment: 1659, 1055, 1081, 1474, 1471, 2071,2072. Nemko USA, Inc. FCC PART 27, SUBPART C Broadband Radio Service and Educational Broadband Service EQUIPMENT: 2.5-2.6-BTS3T-R1 PROJECT NO.:6L0170RUS1 rev 1 Page 9 of 58 Test Data – Occupied Bandwidth 2.503 GHz Navini Mode Ref 20.7 dBm 2.5005 GHz Att 20 dB 2.5005 GHz Offset 33.2 dB 2.5005 GHz A 2.5005 GHz LVL 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 2.5005 GHz 1 MHz/ 2.5005 GHz Center 2.503 GHz 2.5005 GHz Span 10 MHz 2.5005 GHz …

Text truncated - open the document above for the full version.