PMF-MI-TR-201Microscan

ATTESTATION STATEMENT FCC ID: PMF-MI-TR-201 Radio Frequency Identification MICROSCAN SUMMARY: All tests according to FCC Part Subpart C Paragraph 15.209 ! - Performed The equipment under test ! - Fulfills the general approval requirements of FCC Part Subpart C Paragraph 15.209 - MIKES BABT PRODUCT SERVICE GmbH - Responsible Engineer _____________________________ Josef Knab

FCC ID: PMF-MI-TR-201 Attachment E 1 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760 FCC ID: PMF-MI-TR-201 Attachment E 2 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760 FCC ID: PMF-MI-TR-201 Attachment E 3 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760

FCC ID: PMF-MI-TR-201 Label MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760

FCC ID: PMF-MI-TR-201 Attachment E 4 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760 FCC ID: PMF-MI-TR-201 Attachment E 5 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760 FCC ID: PMF-MI-TR-201 Attachment E 6 MICROSCAN File-No. T 20558-00 KJ MIKES BABT Product Service GmbH ! Ohmstrasse 2-4 ! 94342 Strasskirchen ! Tel.: +49 9424-94070 ! Fax: +49 9424-940760

FCC ID: PMF-MI-TR-201 TTI - P-G 009 / 98-00 TTI - P-G 089 / 94-50 File No. T 20558-1-00 KJ , Page 1 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 E M I S S I O N -- T E S T R E P O R T Testreport file no. : T 20558-1-00 KJ ______________ Date : May 09, 2001 of issue _________________ Model / Type No. : MICROSCAN ______________________________________________ Kind of product : Radio Frequency Identification ______________________________________________ Applicant : DTE Automation GmbH ______________________________________________ Manufacturer : DTE Automation GmbH ______________________________________________ Licence holder : DTE Automation GmbH ______________________________________________ Address : Heidestrasse 38 ______________________________________________ 32051 Herford, Germany ______________________________________________ Test result accrdg. to the regulation(s) at page 3 : POSITIVE This testreport with appendix consists of 32 pages. The testresult only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the testlaboratory. FCC ID: PMF-MI-TR-201 File No. T 20558-1-00 KJ , Page 2 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 D I R E C T O R Y Page A) Documentation Directory2________ Testregulations3________ General information4-5________ Discovery of worst case condition 6________ Equipment under Test17________ Summary18________ B) Testdata Conducted emissions 10/150 kHz - 30 MHz 7________ Spurious emissions (magnetic field) 10 kHz - 30 MHz 8-9 ________ Spurious emissions (electric field) 30 MHz - 1000 MHz 10-11 ________ Spurious emissions (electric field) 1 GHz - 18 GHz 12-13 ________ Raiated power of the fundamental wave 14-15 ________ Conducted power of the fundamental wave measured on 16 the antenna terminals ________ Attachment A) Testdata / Bandwith plots A1-A3________ B) List of Test Equipment B1________ C) Photos of the test setup C1________ D) Technical description of the test sample D1-D3 (e.g.CDF, Declaration) ________ E) Photos of the EuTE1-E6________ F) Measurement Protocol for FCC, VCCI and AUSTEL --________ FCC ID: PMF-MI-TR-201 File No. T 20558-1-00 KJ , Page 3 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 T E S T R E G U L A T I O N S The tests were performed according to following regulations : o - EN 50081-1 / 2.1991 o - EN 50081-2 / 7.1993 -------------------------------------------------------------------------------- o - EN 55011 / 3.1991 o - Group 1 o - Group 2 o - class A o - class B o - EN 55014 / 4.1993 o - Household appliances and similar o - tools o - Semiconductor devices o - EN 55014 / A2:1990 o - EN 55104 / 5.1995 Category: o - EN 55015 / A1:1990 o - EN 55015 / 12.1993 o - EN 55022 / 5.1995 o - class A o - class B o - prEN 55103-1/ 3.1995 o - prEN 50121-3-2 / 3.1995 o - EN 60601-1-2 / 4.1994 o - VCCI o - class 1 o - class 2 !- Part 15 Subpart C (15.209) o - Part 15 Subpart C (15.231) FCC ID: PMF-MI-TR-201 File No. T 20558-1-00 KJ , Page 4 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 A D D R E S S O F T H E T E S T L A B O R A T O R Y !-MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 D - 94342 Strasskirchen o - ______________________________________ ______________________________________ ______________________________________ E N V I R O N M E N T A L C O N D I T I O N S Temperature: 15-35 ° C______ Humidity 45-60 %______ Atmospheric pressure 860-1060 mbar_________ POWER SUPPLY SYSTEM UTILIZED Power supply system : Unom = 5 V DC STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error of ±4dB. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) The EuT is a transponder read/write device. Number of received/tested samples: 1 / 1 Serial Number: 01516 DEFINITIONS FOR SYMBOLS USED IN THIS TEST REPORT ! - Black box indicates that the listed condition, standard or equipment is applicable for this Report. o - Blank box indicates that the listed condition, standard or equipment was not applicable for this Report. FCC ID: PMF-MI-TR-201 File No. T 20558-1-00 KJ , Page 5 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 M E A S U R E M E N T P R O T O C O L F O R F C C , V C C I A N D A U S T E L Test Methodology Conducted and radiated emission testing is performed according to the procedures in International Special Committee on Radio Interference (CISPR) Publication 22 (1993), European Standard EN 55022 and Australian Standard AS 3548 (which are based on CISPR 22). The Japanese standard, "Voluntary Control Council for Interference (VCCI) by Data Processing Equipment and Electronic Office Machines, Technical Requirements" is technically equivalent to CISPR 22 (1993). For official compliance, a conformance report must be sent to and accepted by the VCCI. In compliance with FCC Docket 92-152, "Harmonization of Rules for Digital Devices Incorporate International Standards", testing for FCC compliance may be done following the ANSI C63.4-1992 procedures and using the FCC limits or the CISPR 22 Limits. Measurement Error The test system for conducted emissions is defined as the LISN, tuned receiver and coaxial cable. The test system for spurious emissions is defined as the antenna, the pre-amplifier, the tuned receiver and the coaxial cable. These…

Text truncated - open the document above for the full version.

FCC ID: PMF-MI-TR-201 TTI - P-G 009 / 98-00 TTI - P-G 089 / 94-50 File No. T 20558-1-01 KJ , Page 1 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 E M I S S I O N -- T E S T R E P O R T Testreport file no. : T 20558-1-01 KJ ______________ Date : November 27, 2001 of issue __________________ Model / Type No. : MICROSCAN ______________________________________________ Kind of product : Radio Frequency Identification ______________________________________________ Applicant : DTE Automation GmbH ______________________________________________ Manufacturer : DTE Automation GmbH ______________________________________________ Licence holder : DTE Automation GmbH ______________________________________________ Address : Heidestrasse 38 ______________________________________________ 32051 Herford, Germany ______________________________________________ Test result accrdg. to the regulation(s) at page 3 : POSITIVE This testreport with appendix consists of 32 pages. The testresult only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the testlaboratory. FCC ID: PMF-MI-TR-201 File No. T 20558-1-01 KJ , Page 2 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 D I R E C T O R Y Page A) Documentation Directory 2 ________ Testregulations 3 ________ General information 4-5 ________ Discovery of worst case condition 6 ________ Equipment under Test 17 ________ Summary 18 ________ B) Testdata Conducted emissions 10/150 kHz - 30 MHz 7 ________ Spurious emissions (magnetic field) 10 kHz - 30 MHz 8-9 ________ Spurious emissions (electric field) 30 MHz - 1000 MHz 10-11 ________ Spurious emissions (electric field) 1 GHz - 18 GHz 12-13 ________ Raiated power of the fundamental wave 14-15 ________ Conducted power of the fundamental wave measured on 16 the antenna terminals ________ Attachment A) Testdata / Bandwith plots A1-A3 ________ B) List of Test Equipment B1 ________ C) Photos of the test setup C1 ________ D) Technical description of the test sample D1-D3 (e.g.CDF, Declaration) ________ E) Photos of the EuT E1-E6 ________ F) Measurement Protocol for FCC, VCCI and AUSTEL -- ________ FCC ID: PMF-MI-TR-201 File No. T 20558-1-01 KJ , Page 3 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 T E S T R E G U L A T I O N S The tests were performed according to following regulations : o - EN 50081-1 / 2.1991 o - EN 50081-2 / 7.1993 -------------------------------------------------------------------------------- o - EN 55011 / 3.1991 o - Group 1 o - Group 2 o - class A o - class B o - EN 55014 / 4.1993 o - Household appliances and similar o - tools o - Semiconductor devices o - EN 55014 / A2:1990 o - EN 55104 / 5.1995 Category: o - EN 55015 / A1:1990 o - EN 55015 / 12.1993 o - EN 55022 / 5.1995 o - class A o - class B o - prEN 55103-1 / 3.1995 o - prEN 50121-3-2 / 3.1995 o - EN 60601-1-2 / 4.1994 o - VCCI o - class 1 o - class 2 n - Part 15 Subpart C (15.209) o - Part 15 Subpart C (15.231) FCC ID: PMF-MI-TR-201 File No. T 20558-1-01 KJ , Page 4 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 A D D R E S S O F T H E T E S T L A B O R A T O R Y n - MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 D - 94342 Strasskirchen o - ______________________________________ ______________________________________ ______________________________________ E N V I R O N M E N T A L C O N D I T I O N S Temperature: 15-35 ° C ______ Humidity 45-60 % ______ Atmospheric pressure 860-1060 mbar _________ POWER SUPPLY SYSTEM UTILIZED Power supply system : Unom = 5 V DC STATEMENT OF MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error of ±4dB. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) The EuT is a transponder read/write device. Number of received/tested samples: 1 / 1 Serial Number: 01516 DEFINITIONS FOR SYMBOLS USED IN THIS TEST REPORT n - Black box indicates that the listed condition, standard or equipment is applicable for this Report. o - Blank box indicates that the listed condition, standard or equipment was not applicable for this Report. FCC ID: PMF-MI-TR-201 File No. T 20558-1-01 KJ , Page 5 of 18 MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel:+9424-9407-0 Fax:+9424-9407-60 Rev.No. 8.6 M E A S U R E M E N T P R O T O C O L F O R F C C , V C C I A N D A U S T E L Test Methodology Conducted and radiated emission testing is performed according to the procedures in International Special Committee on Radio Interference (CISPR) Publication 22 (1993), European Standard EN 55022 and Australian Standard AS 3548 (which are based on CISPR 22). The Japanese standard, "Voluntary Control Council for Interference (VCCI) by Data Processing Equipment and Electronic Office Machines, Technical Requirements" is technically equivalent to CISPR 22 (1993). For official compliance, a conformance report must be sent to and accepted by the VCCI. In compliance with FCC Docket 92-152, "Harmonization of Rules for Digital Devices Incorporate International Standards", testing for FCC compliance may be done following the ANSI C63.4-1992 procedures and using the FCC limits or the CISPR 22 Limits. Measurement Error The test system for conducted emissions is defined as the LISN, tuned receiver and coaxial cable. The test system for spurious emissions is defined as the antenna, the pre-amplifier, the tuned receiv…

Text truncated - open the document above for the full version.

Attachment C1 of C1: Photo documentation FCC ID: PMF-MI-TR-201 File No.: T 20558-1-01 KJ MIKES BABT PRODUCT SERVICE GmbH w Ohmstrasse 2-4 w D-94342 Strasskirchen w Tel.:+49 94 24 94 07-0 w Fax:+49 94 24 94 07-60 Rev.Nr. 8.5 Test-Setup: Radiated emission 9 KHz - 30 MHz (front view) Test-Setup: Radiated emission 9 KHz - 30 MHz (back view)