PN4FPX110BFuture Secuway PCI Card

Future SecuwayPCI Operator’s Guide 2 SecuwayPCI Operator’s Guide printed in 7/16/01 10:01 AM 2 Registered trademarks ※ Future SecuwaySuite is a registered trademark of Future System Co., Ltd. ※ Future SecuwayCenter is a registered trademark of Future System Co., Ltd. ※ Future SecuwayGate is a registered trademark of Future System Co., Ltd. ※ Future SecuwayPCI is a registered trademark of Future System Co., Ltd. ※ Future SecuwayClient is a registered trademark of Future System Co., Ltd. Note This Operator’s Guide was last modified in July 18, 2000. This guide is subject to change without prior notice to reflect changes and improvement in product and to correct errata that might take place during the printing. All rights reserved. No part of this guide may be cited, reproduced or transmitted in any forms or by any means without the written permission of Future System Co., Ltd. Copyright  1997—2000 Future Systems, Inc., All Rights Reserved. Head office, R&D Center: 1009-1,7&8Fl. Korea Land Corp. Bldg., Daechi-dong, Gangnam-ku, Seoul, Korea 135-851 Tel: 82-2-578-8925 / Fax: 82-2-578-8929 Factory: Ma-905, Factory complex, Yatap-dong, Bundang-ku, Seongnam-shi, Gyeonggi province, Seoul, Korea 463-070 Tel: 82-342-709-3875/ Fax: 82-342-709-3875 http://www.future.co.kr Preface 3 printed in 7/16/01 10:01 AM 3 Preface Thank you for purchasing SecuwayPCI—security device that enables you to protect banking and financial transactions from unauthorized access. The Future Systems Inc. specialized in network security solutions development is delighted to introduce the SecuwayPCI—a system security device that performs user authentication and encrypts TCP/IP communications. SecuwayPCI is designed to protect the delivering of business-critical data containing confidential financial transactions information. SecuwayPCI works in conjunction with SecuwayCenter and SecuwayGate to ensure safe data transmission, regardless of production location: within the financial institutions, cross-institutional networks, ATMs, high amount transactions systems. etc. SecuwayPCI protects the financial transactions information that is extremely crucial to individuals, organizations, and governments. 4 SecuwayPCI Operator’s Guide printed in 7/16/01 10:01 AM 4 Before getting started 1. About SecuwayPCI Operator’s Guide SecuwayPCI supports the standard PCI interface allowing users to operate SecuwayPCI through their personal computers where Window NT is installed. * Window 98 is to be supported soon. This guide consists of four chapters. Chapter 1: “The Introduction to SecuwayPCI” contains the general information about SecuwayPCI its features. Chapter 2: “Configuring SecuwayPCI” is a complete guide to PCI Security board installation and software configuring. Chapter 3: “How to use SecuwayPCI” deals with using Secuway PCI. Chapter 4: “Automatic Upgrade” explains you you how to perform the automatic upgrade. 2. Notations References Warnings ! Terminology definitions * For more details, see footnotes or references. | “Or” command [ ] Optional parameters Underline Underlined characters refer to the remote system 차례 5 Contents Preface ..................................................................................................................................... 3 Before getting started ............................................................................................................... 4 Contents ................................................................................................................................... 5 Chapter 1: Introduction To SecuwayPCI .............................................................7 1. Introduction to Secuway PCI ............................................................................................... 8 2. Features of Secuway PCI .....................................................................................................9 Chapter 2: Configuring of SecuwayPCI .............................................................44 1. Before the Secuway PCI Configuring ................................................................................ 45 1. Operating Environment for SecuwayPCI............................................................ 45 2. Hardware Specifications ....................................................................................... 46 3. External Interface.................................................................................................. 47 2. Installation & Configuration .............................................................................................. 49 1. Installation step by step......................................................................................... 49 2. Secuway PCI Installation ...................................................................................... 49 3. Configuring the Software ...................................................................................... 49 4. Preparation for the key insertion ......................................................................... 54 3. Getting Started ................................................................................................................... 55 1. Log-on..................................................................................................................... 55 2. SecuwayPCI administrator log-on for ATM operations. ................................... 56 3. Close........................................................................................................................57 4. Main Window..................................................................................................................... 58 Chapter 3: How to use SecuwayPCI....................................................................27 1. Security Token Information ............................................................................................... 28 6 SecuwayPCI Operator’s Guide printed in 7/16/01 10:…

Text truncated - open the document above for the full version.

KTI01E-F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 1 of 2 External photo External photoExternal photo External photo- -- -Front FrontFront Front KTI01E-F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 2 of 2 External photo External photoExternal photo External photo- -- -Rear RearRear Rear

Korea Technology Institute Co., Ltd. Page 1 of 1 FCC ID Sample Label Model Number: FPX110B FCC ID : PN4FPX110B Future Systems, Inc. Made in Korea This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.

Korea Technology Institute Co., Ltd. Page 1 of 1 Label location

KTI01E-F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 1 of 3 Internal photo Internal photoInternal photo Internal photo

KTI01F0624 FCC ID : PN4FPX110B 0 Korea Technology Institute Co., Ltd. Page 1 of 13 Certificate of Compliance Test Report No.: KTI01F0624 Registration No.: 99058 Applicant: Future Systems, Inc. Applicant Address: Ma-Dong.905,Sungnam Apt-Factort 151,yatap-Dong,Bundang-Gu,Sungnam- City, Kyunggi-Do,Korea Product: Future SecuwayPCI Card FCC ID: PN4FPX110B Model No. FPX110B Receipt No.: KTI20010427-1 Date of receipt: Apr, 27, 2001 Date of Issue: Apr, 27, 2001 Testing location Korea Technology Institute Co., Ltd. 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea Test Standards: ANSI. C63.4 : 1992 Rule Parts: FCC Part 15, Subpart B Equipment Class: Class B Test Result: The above mentioned product has been tested and passed. Prepare by: J. H. Lee Tested by: S. B. Kim/ Engineer Approved by: G. C. Min/ President Signature Date Signature Date Signature Date Other Aspects : Abbreviations :  OK, Pass=passed  Fail=failed  N/A=not applicable ☞  This test report is not permitted to copy partly without our permission.  This test result is dependent on only equipment to be used.  This test result is based on a single evaluation of one sample of the above mentioned.  This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S Government.  We certify this test report has been based on the measurement standards that is traceable to the national or international standards. KTI01F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 2 of 13 ≫≫ ≫≫≫≫ ≫≫ Contents ≪≪ ≪≪≪≪ ≪≪ 1. 2. 3. 4. 5. 6. Annex1 Annex2 Contents List of Tables List of Figures List of Photographs General Test Site 2.1 Location 2.2 List of Test and Measurement Instruments 2.3 Test Data 2.4 Test Environment Description of the tested samples 3.1 Rating and Physical characteristics 3.2 Submitted documents Measurement conditions 4.1 Modes of operation 4.2 Additional equipments 4.3 Uncertainty 4.4 Test Setup Emission Test 5.1 Conducted Emissions 5.2 Radiated Emissions Photographs of the Test Set-up Label Photographs of EUT 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 6 6 7 8 11 12 14 15 16~19 ≫ ≫≫ ≫ List of Tables Table 1 List of test and measurement equipment Table 2 Test Data. Conducted Emissions Table 3 Test Data. Radiated Emissions ≫ ≫≫ ≫ List of Figures Figure 1 Spectral Diagram, LINE-PE Figure 2 Spectral Diagram, Neutral-PE ≫ ≫≫ ≫ List of Photographs Photograph 1 Setup for Conducted Emissions Photograph 2 Setup for Radiated Emissions 4 11 13 9 10 16 17 KTI01F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 3 of 13 1. General This equipment has been shown to be capable of compliance with the applicable technical standards and was tested in accordance with the measurement procedures as indicated in this report. We attest to the accuracy of data. All measurements reported herein were performed by Korea Technology Institute Co., LTD. And were made under Chief Engineer’s supervision. We assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. 2. Test Site Korea Technology Institute Co., LTD 2.1 Location 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea The Test Site is in compliance with ANSI C63.4/1992 for measurement of radio Interference. KTI01F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 4 of 13 KTI01F0624 FCC ID : PN4FPX110B 2.2 List of Test and Measurement Instruments Table 1 : List of Test and Measurement Equipment    Conducted Emissions Kind of Equipment Type S/N Calibrated until Spectrum Analyzer R3261C 61720427 11.2001 Field Strength Meter ESPC 832827/011 11.2001 LISN ESH3-Z5 8254601019 5.2002 LISN KNW407 8-1097-7 11.2001 Pulse limiter ESH3Z2 357.8810.52 11.2001 Conducted Cable N/A N/A 11.2001    Radiated Emissions Kind of Equipment Type S/N Calibrated until Field Strength Meter ESPC 832827/011 11.2001 Spectrum Analyzer R3261C 61720427 11.2001 Pre Amplifier 8447D 2944A06874 11.2001 Log Periodic Antenna 3146 9105-1343 11.2001 Biconical Antenna 3110 9105-3100 11.2001 Open Site Cable N/A N/A 11.2001 Antenna Mast DETT-03 N/A N/A Antenna & Turntable controller DETT-03 91X519 N/A 2.3 Test Date Date of Application : Apr. 27, 2001 Date of Test : Jun. 09, 2001 2.4 Test Environment See each test item’s description . Korea Technology Institute Co., Ltd. Page 5 of 13 KTI01F0624 FCC ID : PN4FPX110B 3. Description of the tested samples The EUT is Future SecurityPCI Card. 3.1 Rating and Physical Characteristics ! Processor: 32-bit RISC processor ! Memory: 16MB ! Operating Voltage range: +3.3VDC ~ +5.0VDC ! Operating Current: 2A ! Dimensions: 170mm x 110mm x 13mm (W x D x H) 3.2 Submitted Documents  User’s Guide  Block Diagram KTI01F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 6 of 13 4. Measurement Conditions Testing Input Voltage: DC 5.0V. 4.1 Modes of Operation The EUT was in the following operation mode during all testing; Prior to a measurement, the PDA Module shall be operated until stabilization has been reached. 4.2 Additional Equipment DEVICE TYPE Manufacturer M/N S/N FCC ID PC Atech Co., Ltd. Att None - Monitor Samsung Electonics 750P(T) P015H2GN503475 - Keyboard Solid Year Co., Ltd TRI-270 910090345 - Mouse Microsoft ITE78CJ 1048611-5 - Mouse Sejin SMB-400 0CIM004047 - Printer Hewlett Packard C4569A SG78M1H0CF - 4.3 Uncertainty 1) Radiated disturbance UC (Combined standard Uncertainty) = ± 1.8dB Expanded uncertainty U=Kuc K = 2 ∴ U = ± 3.6dB 2) Conducted disturbance UC = ± 0.88dB U = Kuc=2xUc = ± 1.8dB KTI01F0624 FCC ID : PN4FPX110B Korea Technology Institute Co., Ltd. Page 7 of 13 KTI01F0624 FCC ID : PN4FPX110B 4.4 Test setup Korea Technology Institute Co., Ltd. Page 8 of 13 PRINTER PC MONITER MOUSE KEYBOARD MOUSE KTI01F0624 FCC ID : PN4FPX110B 5. EMISSION Test 5.1 Conducted Emissions Result : Pass The line-conducted facility is located inside a 2.3M x 3.5M x 5.5M shielded closure. The shielding effectiveness of …

Text truncated - open the document above for the full version.

Korea Technology Institute Co., Ltd. Page 1 of 2 6. Photograph of the Test Set-Up Photograph 1 : Setup for radiated Emissions Korea Technology Institute Co., Ltd. Page 2 of 2 Photograph 2 : Setup for Conducted Emissions