PP203037I2.4G Mini Receiver

Power On. Push. Plug the receiver into the usb port. The receiver will match the mouse automatically. Open the cover to change battery. Place the battery right as the sign . ப߭䐘俠Ұㄥ࢝௵ 8'655ப߭ RAPOO FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that i nterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance cou ld void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:1) This device may not cause interference and2) This device must accept any interference, including interference that may cause undesired operation of the device.Caution!The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Su ch modifications could void the user authority to operate the equipment. Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NCC ḍ᪮Ԣࡳ⥛䳏⊶䔏ᇘᗻ䳏′′ᄣ⧚䕺⊩㽣ᅮ˖㄀कѠṱ15点ᔶᓣ䁡䄝ড়ḐПԢࡳ⥛ᇘ丏䳏′′ˈ䴲15点䀅ৃˈ݀ৌǃଚ㰳៪Փ⫼㗙ഛϡᕫ᪙㞾䅞᳈丏⥛ǃࡴ໻ࡳ⥛៪䅞᳈ॳ䀁㿜П⡍ᗻঞࡳ㛑DŽ㄀कಯṱԢࡳ⥛ᇘ丏䳏′′ПՓ⫼ϡᕫᕅ䷓亯㟾ᅝܼঞᑆ᫒ড়⊩䗮ֵ˗15点ⱐ⧒᳝ᑆ᫒⧒䈵ᰖˈឝゟेذ⫼ˈᑊᬍ୘㟇⛵ᑆ᫒ᰖᮍᕫ㑐㑠Փ⫼DŽࠡ䷙ড়⊩䗮ֵˈᣛձ䳏ֵ㽣ᅮ԰ὁП⛵㎮䳏ֵDŽԢࡳ⥛ᇘ丏䳏′′䷜ᖡফড়⊩䗮ֵ៪Ꮉὁǃ里ᅌঞ䝿Ⱆ⫼䳏⊶䔏ᇘᗻ䳏′′䀁٭Пᑆ᫒DŽ ON USB 1.5V AA*1 030372.4G Mini Receiver2.4G Frequency Range/ : 2402~2479 MHz Channel No./ : 16 Modulation Type / : GFSK Date Rate/ : 1Mbps 2.4G Mini Receiver user guide1. Plug the Mini Receiver into a USB port of your computer.2. Turn on the Wireless Optical Mouse.3. Move the Wireless Optical Mouse to get connected with the Mini Receiver. 030372.4G Mini Receiver2.4G

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Shenzhen Rapoo Technology Co., Ltd would like the following documents regarding this submission for FCC ID: PP203 037I to be kept confidential. 1. Schematic 2. Block diagram 3. Operational description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Charles Zou Nov 10, 2011

Oct 27, 2011 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Shenzhen Rapoo Technology Co., Ltd. Sincerely, Signature: Name: Charles Zou Title: R&D Manager

Shenzhen Rapoo Technology Co., Ltd Mailing address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China Telephone: +86 755 2732 7528 Fax No.: +86 755 2732 7498 Attestation Letter To whom it may concern: We, the undersigned, Name: Shenzhen Rapoo Technology Co., Ltd Address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn City: Shenzhen Declare that: Product Name: 2.4G Mini Reciver Model Name: 030 37 Brand Name: RAPOO Hereby the DoC procedure will be carried out prior to marketing the product in the USA. on our behalf. Date: 2011- 10-27 City: Shenzhen Name: Charles Zou Title: R&D Manager Signature:

Neutron Engineering Inc. Project No.: 1110C211A Page 2 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 2 of 6 1110C211A 1110C211A

03037 LABEL AND LABEL LOCATION

Neutron Engineering Inc. Project No.: 1110C211A Page 3 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 3 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 4 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 4 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 5 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 5 of 6 1110C211A 1110C211A Neutron Engineering Inc. Project No.: 1110C211A Page 6 of 6 1110C211A

Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 1 of 63 FCC/IC Radio Test Report FCC ID: PP203037I IC: 7497B-03037 This report concerns (check one): Original Grant Class II Change Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 25, 2011 Date of Test: Oct. 25, 2011 ~ Nov. 01, 2011 Testing Engineer : (Ivan Cao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Issued Date : Nov. 02, 2011 Project No. : 1110C211A Equipment : 2.4G Mini Receiver Model Name : 03037 Applicant : ShenZhen Rapoo Technology Co., Ltd. Address : Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone ,Fenghuang Fuyong, BaoAn , Shenzhen，P.R.CHINA Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 2 of 63 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 3 of 63 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST 18 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHz) 23 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 32 4.2.10 TEST RESULTS (2400 – 2483.5 MHz) 50 5 . BANDWIDTH TEST 51 5.1 MEASUREMENT INSTRUMENTS LIST 51 5.2 TEST PROCEDURE 51 5.3 DEVIATION FROM STANDARD 51 5.4 TEST SETUP 51 5.5 EUT OPERATION CONDITIONS 51 5.6 TEST RESULTS 52 Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 4 of 63 Table of Contents Page 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 54 6.1 APPLIED PROCEDURES / LIMIT 54 6.1.1 MEASUREMENT INSTRUMENTS LIST 54 6.1.2 TEST PROCEDURE 54 6.1.3 DEVIATION FROM STANDARD 54 6.1.4 TEST SETUP 54 6.1.5 EUT OPERATION CONDITIONS 54 6.1.6 TEST RESULTS 55 7 . EUT TEST PHOTO 60 Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 5 of 63 1. CERTIFICATION E q u i p m e n t : 2.4G Mini Receiver Brand Name : RAPOO Model Name. : 03037 A p p l i c a n t : ShenZhen Rapoo Technology Co., Ltd. Date of Test : Oct. 25, 2011 ~ Nov. 01, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2003 ; Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1110C211A) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 6 of 63 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 7 of 63 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 60 of 63 7. EUT TEST PHOTO Conducted Measurement Photos Normal Link Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 60 of 63 7. EUT TEST PHOTO Conducted Measurement Photos Normal Link Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 61 of 63 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 61 of 63 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 62 of 63 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 62 of 63 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 63 of 63 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211A Page 63 of 63 Radiated Measurement Photos Above 1000MHz