PP203041B2.4G Nano Receiver

Wireless Touch Optical Mouse 雷柏無線光學觸摸滑鼠 Quick Start Guide(V1.0) See www.rapoo.com/T6/faq for latest FAQs, drivers and quick start guide. For extensive service,register at www.rapoo.com/register. Troubleshooting Do not open or repair this device. Do not use the device in a damp environment. Clean the device with a dry cloth. Safety instructions Copyright It is forbidden to reproduce any part of this quick start guide without the permission of Rapoo Technology Co., Ltd. CE Declaration of Conformity We the manufacturer Shenzhen Rapoo Technology Ltd., Co. Fax: 0755-2732 7498 Declare that the product Product Name Wireless Touch Optical Mouse Model No T6 Complies with t he following norms of : EN 60950-1 2006 / A11:2009 EN 301 489-1 V1.8.1 (2008-04) EN 301-489-3 V1.4.1(2002-08) EN 300 440-1 V1.5.1(2009-03) EN 300 440-2 V1.3.1(2009-03) The product is in compliance with the essential requirements of Council Directives 2006/95/EC and 99/5/EC, and the ROHS European directives 2002/95/EC dated on January 27th 2003 amended by directive 2005/618/EC dated on August 18th 2005. Manufacturer/Authorised representative ________________________________________ Charles Zou, Manager R&D Department Date of Issue: Jun. 9, 2011 USB 297×420mm 80g 5601-06K00-222 www.rapoo.com/T6/faqwww.rapoo.com/ 1620/download www.rapoo.com/register 안전 지침 이 장치를 열거나 수리하지 마십시오. 장치를 습한 환경에서 사용하지 마십시오. 장치를 마른 걸레로 닦으십시오. 저작권 이 간편 시작 설명서의 어떤 부분도 Rapoo Technology Co., Ltd.의 허가 없이 복제될 수 없습니다. 최근 미국의 소리는 이런 곳, 드라이버 및 퀵 스타트 가이드에 대한 www.rapoo.com/T6/faq를참조하십시오. 광범위한 서비스를 위해,에 등록 문제 해결 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. NCC 警告語 根據交通部低功率管理辦法規定： 第十二條 經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用， 并改善至無干擾時方的繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及 醫療用電波輻射性電機設備之干擾。 Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Declaration of Conformity Hereby, ShenZhen Rapoo Technology Co., Ltd, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. RAPOO Power on Press Open Insert the battery Please plug the receiver into the USB port, wait about 3 seconds to use 03041B 2.4G Nano Receiver

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Shenzhen Rapoo Technology Co., Ltd would like the following documents regarding this submission for FCC ID: PP203041B to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Cha rles Zou Sep 28, 2011

Sep 28, 2011 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Shenzhen Rapoo Technology Co., Ltd. Sincerely, Signature: ....................................... Name: Charles Zou Title: R&D Manager

Shenzhen Rapoo Technology Co., Ltd Mailing address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China Telephone: +86 755 2732 7528 Fax No.: +86 755 2732 7498 Attestation Letter To whom it may concern: We, the undersigned, Name: Shenzhen Rapoo Technology Co., Ltd Address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn City: Shenzhen Declare that: Product Name: 2.4G Nano Receiver Model Name: 03041B Brand Name: RAPOO Hereby the DoC procedure will be carried out prior to marketing the product in the USA. on our behalf. Date: 2011-10-06 City: Shenzhen Name: Charles Zou Title: R&D Manager Signature:

Neutron Engineering Inc. Project No.: 1109C042A Page 2 of 5 1109C042A 1109C042A Neutron Engineering Inc. Project No.: 1109C042A Page 2 of 5 1109C042A 1109C042A

03041B LABEL

Neutron Engineering Inc. Project No.: 1109C042A Page 3 of 5 1109C042A 1109C042A Neutron Engineering Inc. Project No.: 1109C042A Page 3 of 5 1109C042A 1109C042A Neutron Engineering Inc. Project No.: 1109C042A Page 4 of 5 1109C042A 1109C042A Neutron Engineering Inc. Project No.: 1109C042A Page 4 of 5 1109C042A 1109C042A Neutron Engineering Inc. Project No.: 1109C042A Page 5 of 5 1109C042A

Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 1 of 66 FCC/IC Radio Test Report FCC ID: PP203041B IC: 7497B-03041B This report concerns (check one): Original Grant Class II Change Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 06, 2011 Date of Test: Sep. 06, 2011 ~ Sep. 13, 2011 Testing Engineer : (Ivan Cao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Issued Date : Sep. 15, 2011 Project No. : 1109C042A Equipment : 2.4G Nano Receiver Model Name : 03041B Applicant : ShenZhen Rapoo Technology Co., Ltd. Address : Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone ,Fenghuang Fuyong, BaoAn , Shenzhen，P.R.CHINA Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 2 of 66 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 3 of 66 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BELOW 30MHz) 22 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 23 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 35 4.2.10 TEST RESULTS (2400 – 2483.5 MHz) 53 5 . BANDWIDTH TEST 54 5.1 MEASUREMENT INSTRUMENTS LIST 54 5.2 TEST PROCEDURE 54 5.3 DEVIATION FROM STANDARD 54 5.4 TEST SETUP 54 5.5 EUT OPERATION CONDITIONS 54 5.6 TEST RESULTS 55 Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 4 of 66 Table of Contents Page 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 57 6.1 APPLIED PROCEDURES / LIMIT 57 6.1.1 MEASUREMENT INSTRUMENTS LIST 57 6.1.2 TEST PROCEDURE 57 6.1.3 DEVIATION FROM STANDARD 57 6.1.4 TEST SETUP 57 6.1.5 EUT OPERATION CONDITIONS 57 6.1.6 TEST RESULTS 58 7 . EUT TEST PHOTO 63 Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 5 of 66 1. CERTIFICATION E q u i p m e n t : 2.4G Nano Receiver Brand Name : RAPOO Model Name. : 03041B A p p l i c a n t : ShenZhen Rapoo Technology Co., Ltd. Date of Test : Sep. 06, 2011 ~ Sep. 13, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2003 ; Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1109C042A) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 6 of 66 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FICP-1-1109C042A Page 7 of 66 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximat…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 51 of 54 7. EUT TEST PHOTO Conducted Measurement Photos Normal Link Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 51 of 54 7. EUT TEST PHOTO Conducted Measurement Photos Normal Link Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 52 of 54 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 52 of 54 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 53 of 54 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 53 of 54 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 54 of 54 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1109C042A Page 54 of 54 Radiated Measurement Photos Above 1000MHz