PP20F0032.4G Audio Transmitter

H3070 Wireless sZKXKUNKGJYKZ 7[OIQ9ZGXZ-[OJK (V1.0) 无线立体声麦克风耳机 快速开始指南 無線立體聲麥克風耳機 快速開始指南 8'655ப߭ 䤚 ֘ذ-஺栴䤚֘ذ- '[JOU:XGTYSOZZK ֺ垹͹, 1 1 2 3 B DCA on/off 12 on/off 0F003 ' ֺ垹E.!դ䱺E䐘俠ॹ檥利湬ұ梏৶㷬=OXKRKYYYZKXKUNKGJYKZ ( ֺ垹E,!դ䱺E-஺栴䤚֘ذ-'[JOU:XGTYSOZZK 45 67 Windows 7/ Vista 2× 89 1011 Windows XP Index LanguagePage English1 2 3 4 12 3 Installation Configuration Trouble Shooting noituloSmelborP If your problem is not solved, please contact the helpdesk at www.rapoo.com/H3070/faq 2 A. Headset B. Transmitter C. USB charging cable D. 3.5mm to USB cable No sound at all My friend on msn/skype does not hear what I’m saying Bad sound quality Sound drop out when changing the volume Volume control under wired mode You can not rotate the ear cover -Before using the headset and the transmitter need to be fully charged. -Connect the USB charging cable to the headset, the transmitter and a computer to charge them. -The red LED on headset or transmitter will be on when charging. -The corresponding red LED will go off when the headset or the transmitter is fully charged. -The corresponding red LED will blink when the headset or transmitter is low battery. Wireless mode -Connect the transmitter to an audio device with a 3.5mm audio hole or USB port. -Turn on the transmitter and the headset. -The green LED will blink and then stay on when the headset is connected. -Make sure you have charged the headset. -Make the headset as your default audio device. Refer to step “5” and “10”. -Restart the media player. -Connect the transmitter to another USB port. -Check if the headset is under USB mode. -Check if the headset is set as your default device. Refer to step “5” and “10”. -Increase the microphone volume and increase the volume from the msn/skype software. -Check if the headset is set as your default device on msn/skype software. -Maximum wireless range is 8m, but walls or big objects may reduce the range. -Move other working wireless devices away from the transmitter and headset. -This is normal behaviour. But if it is bothering, you can use the volume control of your media playing software. -Please push the headband to the bottom and then rotate the ear cover to flat them. 4 5 6 7 8 9 10 11 Go to “Playback Devices” to configure the microphone. Set the “Rapoo Wireless Audio” as your default device. - Select the “Recording” tab. - Double click on the “Microphone”. Set the level to 100%. Windows XP Go to “Adjust Audio Properties” to configure the microphone. - Set the “Rapoo Wireless Audio” as your default device. - Go to the “Voice” tab. Click on the “Volume” of the Voice recording. Set the level to 100% . Windows 7/ Vista Wired mode -Connect the headset to an audio device with a 3.5mm to USB audio cable. Note:It is recommended to turn off the headset under wired mode. 21 -Under wired mode, the volume control on the headset can not work. You can use the volume control of your PC or media playing software. 1 2 3 Ҿጎօየ! ದዃ 2 ۙবᅼଉ้܏ᅼ ᆶ၍ఇ๕ -ॽ4/6nnገVTCᅼೕ၍ᇑܺ஛ࢅᅼೕยԢ૶থă !ጀǖॺᅱሞᆶ၍ఇ๕ူ࠲Կܺ஛ă ࿮၍ఇ๕ -ॽ݀พഗ૶থ4/6ټڟnnᅼೕথ੨ईVTC܋੨ڦᅼೕยԢă -ă࠲ᇸਸۉڦ஛ܺࢅพഗ݀ਸوٴ -ଋă׉ࢫ෻ຮڨ୴ڦพഗ݀ࢅ஛้ܺLjࠀׯ૶থ 1 2 4 5 6 7 8 9 10 11 -ۅऍĐխݣยԢđದዃ஛ਖ਼ޅă -ॽĐSbqpp!Xjsfmftt!BvejpđยྺఐණยԢă -჋ስĐ୤዆đ჋ၜă -ມऍĐ஛ਖ਼ޅđă -ॽᅼଉยྺ211&ă Windows XPWindows 7/ Vista B/ܺ஛! C/݀พഗ D/VTC؊ۉ၍ E/4/6nnገVTCᅼೕ၍ -ăۉ஢؊Ⴔۼพഗ݀ࢅ஛ܺ๑ᆩമ -ॽVTC؊ۉ၍ݴ՚ᇑܺ஛Ă݀พഗۉࢅస૶থन੗؊ۉă -ăۉଋ՗๖ኟሞ؊׉ڨࢤڦพഗ݀஛ईܺ -ăׯྜۉ௶՗๖؊ڨࢤڦพഗ݀஛ईܺ -ଉփፁăۉ׾ۉ෻ຮ՗๖၎ᆌڨࢤڦพഗ݀஛ईܺ -ۅऍĐۙኝᅼೕຌႠđದዃ஛ਖ਼ޅă -ॽĐSbqpp!Xjsfmftt!BvejpđยྺఐණยԢă -ۅऍĐᇕᅼđ჋ၜă -ۅऍĐᅼଉđă -ॽᅼଉยྺ211&ă ဆݴቱࠤ ࿚༶঴ਦӸ݆ ுᆶําᅼ -ඓԍܺ஛ᅙ؊ۉă -ॽܺ஛ยྺఐණᅼೕยԢă൩֖੊6ڼօ21ڼࢅօă -ዘႎਸഔܠ௃༹խݣഗă -ॽ݀พഗ૶ۉڟసڦഄ໱VTC܋੨ă ವᆷሞnto0tlzqfฉདփڟ ࿢ڦําᅼ -൩ॠֱܺ஛๟تޏᇀVTCఇ๕ă -൩ॠֱܺ஛๟ޏ๟ఐණยԢă൩֖੊6ڼօ21ڼࢅօă -ۙۇٴ஛ਖ਼ޅᅼଉࢅnto0tlzqfᅼଉă -൩ॠֱܺ஛๟ޏ๟nto0tlzqfఐණยԢă ᅼዊփࡻ -ܺ஛ڦፌدۇٴ๼ਐ૗ྺ9nLjڍ഻Մईڦۇٴ࿿༹੗ీࣷ३ၭد๼ਐ૗ă -ॽഄ໱ኟሞ߾ፕڦ࿮၍ยԢᇺ૗݀พഗܺࢅ஛ă -ኄ๟ኟ׉၄ၡLj౞੗ᅜ๑ᆩᅼೕխݣ෉ॲۙবᅼଉă ᆶ၍ఇ๕ڦᅼଉۙব-ᆶ၍ఇ๕ူLjܺ஛ڦᅼଉۙবփీ๑ᆩă౞੗ᅜ๑ᆩۉసईܠ௃༹խݣ෉ॲۙবᅼଉă ۯቸփీገܺ -൩ॽཀྵټླྀ዁ڹեւም჉ገݣೝă ස౞ڦ࿚༶࣏ு঴ਦLj൩ک୤xxx/sbqpp/dpn0I41810gbră 3 1 2 3 ᙔ恀、糭 ದዃ ⤽丒ⷱ᳊ -ᝍOO欭75$磮祫丒唛列莇઴磮祫拂ұ沬⏕ă !ጀǖᲦ敮ົ⤽丒ⷱ᳊č疨甝列莇뺔 㣣丒ⷱ᳊ ᝍ䆺ᝉඅ沬⏕ܧ᬴OO磮祫⏕৑d75$䤑৑䇂磮祫拂ұ뺔 ⇦甠䆺ᝉඅ઴列莇䇂睛㒼甠疨뺔 沬⏕viiߗ쩪뺕列莇઴䆺ᝉඅ䇂䶙㧲甗㩛ᶭᬷǩ뺔 1 2 4 5 6 7 8 9 10 11 Windows XPWindows 7/ Vista ́㽡ݓ列莇઴䆺ᝉඅ湍睠׉㕿睛뺔 ᝍ75$׉睛丒ܙۮ唛列莇뺓䆺ᝉඅ઴睛同沬⏕पৠ׉睛뺔 列莇d䆺ᝉඅ䇂䱔㧲ᬷǩ彜䗨⿽ົ׉睛뺔 列莇d䆺ᝉඅ䇂䱔㧲㔙彜䗨׉睛ᙚvii뺔 列莇d䆺ᝉඅ䇂䱔㧲甗㩛彜䗨䉱⃾睛ᆒ睛濞ď梦뺔 䔕·列莇᫓׉睛뺔 ᝍ列莇拂㡓菩掄磮祫拂ұ뺔搈ঠ净䥮、઴䥮、뺔 濜✤甠௧ᆪᑲ綗▇♷අ뺔 ᝍ䆺ᝉඅ沬ܧ睛同䇂ؗȠ75$ྼ뺔 #列莇 $䆺ᝉඅ %75$׉睛丒 &OO欭75$磮祫丒 菴▲q▇♷拂ұr滢傢莇ב稄뺔 ᝍq4CRQQ9KTGNGUU#WFKQr拂㡓菩掄拂ұ뺔 浫▯q熣ܲr浫礔뺔 眞▲q莇ב稄r뺔 ᝍ磮濞拂㡓뺔 菴▲q揰⛅磮祫៤Ẍr滢傢莇ב稄뺔 ᝍq4CRQQ9KTGNGUU#WFKQr拂㡓菩掄拂ұ뺔 菴▲q措磮r浫礔뺔 菴▲q磮濞r뺔 ᝍ磮濞拂㡓뺔 ⚀皮ۮ⨀ ொ禆戮ㆴ殧(日) ㇖⤽劖磮 ⤿ভົOUPUM[RGČ励ďܧ ix䇂劖磮 搈⺹⩰列莇⟶ਤ쭅✺75$ⷱ᳊뺔 搈⺹⩰列莇⟶ਤ⟶菩掄拂ұ뺔搈ঠ净䥮、઴䥮、뺔 揰ᆼ莇ב稄磮濞઴OUPUM[RG磮濞뺔 搈⺹⩰列莇⟶ਤ⟶OUPUM[RG菩掄拂ұ뺔 磮枎ďቃ 列莇䇂⤱ᆼӢ欍棟眱㡓O뺕ʴ㪼ᄥdᆼ䇂㫹綗ৠ印⤵㐆᝚Ӣ欍棟眱뺔 ᝍؗȠ⿽ົᫀː䇂㣣丒拂ұ洱眱䆺ᝉඅ઴列莇뺔 揰䩂磮濞좹✱磮 沓⟶⿽ᬷ㵊暸뺕ὁৠȵ́㽡磮祫▇♷檃綗䇂磮濞揰䩂뺔 ⤽丒ⷱ᳊䇂磮濞⏙ܲ ⤽丒ⷱ᳊č뺕列莇䇂磮濞⏙ܲď印́㽡뺔ὁৠȵ́㽡睛同dᆪᑲ綗▇♷檃綗⏙ܲ磮濞뺔 列傛ď印欭ࠤ 搈ᝍ祗᬴⏚哶ᯓ温ض❘欭♷ᮔ뺔 ቎ὁ䇂ொ禆涊㇖戮ㆴ뺕搈䆸熣YYYTCRQQEQO*HCS뺔 1 2 3 4 - OO75$   - OO75$  - -.'& 1 2 4 5 6 7 8 9 10 11 Windows XPWindows 7/ Vista A. B. C. USB D. 3.5mm - USB -"Playback Devices"(). -"Rapoo Wireless Audio"(Rapoo ). -"Voice"(). - "Volume"(). - 100%. -"Adjust Audio Properties"() . -"Rapoo Wireless Audio"(Rapoo ) . -"Voice"(). - "Volume"(). - 100%. - -  -75$ -.'& -.'& -.'& -  - - -75$ -75$ - -/505-;2' -/505-;2' -O - - -2%  ƻ 㸼冫䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼6-7ᷛޚ㾘ᅮⱘ䰤䞣㽕∖ҹ下。 ⊼˖⦃ֱՓ⫼ᳳ䰤ⱘখ㗗ᷛপއѢѻકגᐌᎹ԰ⱘ⏽ᑺ੠⑓ᑺㄝᴵӊDŽ 铅 Pb 汞 Hg 镉 Cd 六价铬 Cr 多溴联苯 （PBB） 多溴二苯醚 PBDE 耳麦／发射器 有毒有害物质或元素 Plastic parts ○○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ PWAs ○○ ○ ○ ○○ Cable ○○ ○ ○ ○○ Metal parts ○○ ○ ○ ○○ Rubber parts ○○ ○ ○ ○○ 产品中有毒有害物质或元素的名称及含量 根据中国《电子信息产品污染控制管理办 法 》 Company name Address Tel# Vim Yield Company 香港九龍官塘成業街20號怡生工業大廈2字樓全層  AV FUTURE LINK SDN BHD 12$-$/$17$0$13(5,1'8675,$1 28*38&+21*.8$/$/803850$/$<6,$   Hongkong 中国大陆 Việt Nam Malaysia DescriptionInformationCountry(or area) Company name Address Tel# Tên công ty địa chỉ đ…

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Shenzhen Rapoo Technology Co., Ltd would like the following documents regarding this submission for FCC ID: PP20F003 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Charles Zou July 28, 2011

Sep 28, 2011 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Shenzhen Rapoo Technology Co., Ltd. Sincerely, Signature: ....................................... Name: Charles Zou Title: R&D Manager

Shenzhen Rapoo Technology Co., Ltd Mailing address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China Telephone: +86 755 2732 7528 Fax No.: +86 755 2732 7498 Attestation Letter To whom it may concern: We, the undersigned, Name: Shenzhen Rapoo Technology Co., Ltd Address: Block A1,B1,B2,1st second stage, 1st Industrial, Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn City: Shenzhen Declare that: Product Name: 2.4G Audio Transmitter Model Name: 0F003 Brand Name: RAPOO Hereby the DoC procedure will be carried out prior to marketing the product in the USA. on our behalf. Date: 2011-10-11 City: Shenzhen Name: Charles Zou Title: R&D Manager Signature:

Neutron Engineering Inc. Project No.: 1107C062B Page 2 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 2 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 3 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 3 of 9 1107C062B 1107C062B

其他必须资料放置于说明书及使用手册中。

Neutron Engineering Inc. Project No.: 1107C062B Page 4 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 4 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 5 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 5 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 6 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 6 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 7 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 7 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 8 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 8 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 9 of 9 1107C062B 1107C062B Neutron Engineering Inc. Project No.: 1107C062B Page 9 of 9 1107C062B 1107C062B

Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 1 of 55 FCC/IC Radio Test Report FCC ID: PP20F003 IC: 7497B-0F003 This report concerns (check one): Original Grant Class II Change Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul. 12, 2011 Date of Test: Jul. 12, 2011 ~ Jul. 19, 2011 Testing Engineer : (Ivan Cao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Issued Date : Jul. 22, 2011 Project No. : 1107C062B Equipment : 2.4G Audio Transmitter Model Name : 0F003 Applicant : ShenZhen Rapoo Technology Co., Ltd. Address : Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone ,Fenghuang Fuyong, BaoAn , Shenzhen, P.R.CHINA Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 2 of 55 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 3 of 55 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST 18 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHz) 23 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 28 4.2.10 TEST RESULTS (2400 – 2483.5 MHz) 42 5 . BANDWIDTH TEST 43 5.1 MEASUREMENT INSTRUMENTS LIST 43 5.2 TEST PROCEDURE 43 5.3 DEVIATION FROM STANDARD 43 5.4 TEST SETUP 43 5.5 EUT OPERATION CONDITIONS 43 5.6 TEST RESULTS 44 Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 4 of 55 Table of Contents Page 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 46 6.1 APPLIED PROCEDURES / LIMIT 46 6.1.1 MEASUREMENT INSTRUMENTS LIST 46 6.1.2 TEST PROCEDURE 46 6.1.3 DEVIATION FROM STANDARD 46 6.1.4 TEST SETUP 46 6.1.5 EUT OPERATION CONDITIONS 46 6.1.6 TEST RESULTS 47 7 . EUT TEST PHOTO 52 Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 5 of 55 1. CERTIFICATION E q u i p m e n t : 2.4G Audio Transmitter Brand Name : RAPOO Model Name. : 0F003 A p p l i c a n t : ShenZhen Rapoo Technology Co., Ltd. Date of Test : Jul. 12, 2011 ~ Jul. 19, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2003 ; Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1107C062B) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 6 of 55 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) The EUT used rechargeable Li-ion battery. Neutron Engineering Inc. RVC-1110005 Report No.: NEI-FICP-1-1107C062B Page 7 of 55 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expende…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 52 of 55 7. EUT TEST PHOTO Conducted Measurement Photos Normal link Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 52 of 55 7. EUT TEST PHOTO Conducted Measurement Photos Normal link Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 53 of 55 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 53 of 55 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 54 of 55 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 54 of 55 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 55 of 55 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C062B Page 55 of 55 Radiated Measurement Photos Above 1000MHz