PP23399dongle

1:1 A.1 11 倪逸昕2025.03.10 5V Reciever / récepteur / Empfänger / ricevitore / receptor / ontvanger / Receiver / приемник / приймач USB Charging/Data Cable (Port A to Port C) ｜ Câble de charge/données USB (port A vers port C) ｜USB-Aufla- dung/Datenkabel (Anschluss A auf Anschluss C) ｜Cavo di carica USB/dati (da porta A a porta C) ｜Cable de carga/datos USB (puerto A a puerto C) ｜USB laad-/datakabel (poort A naar poort C) ｜Cabo de carregamento/- dados USB (Porta A para Porta C) ｜USB-кабель для зарядки / передачи данных (от порта A к порту C) ｜ Кабель зарядження по USB/передачі даних (Порт А в Порт С) Wired Charging / Charge filaire / Kabelgebundene Aufladung / Carica cablata / Carga con cable / Bekabeld opladen / Carregamento com fio / Проводной способ зарядки / Дротове зарядження Wireless Charging / Charge sans fil / Kabellose Aufladung / Carica wireless / Carga inalámbrica / Draadloos opladen / Carregamento sem fios / Беспроводная зарядка / Бездротове зарядження Connecting Device B / Dispositif de connexion B / Gerät B verbinden / Connessione del dispositivo B / Conexión- del dispositivo B en curso / Apparaat B verbinden / Ligar o dispositivo B / Подключение устройства B / Підключення Пристрою В Wireless Charging Module (to be purchased seperately) / Module de charge sans fil (s’achète séparément) / Kabelloses Lademodul (separat erhältlich) / Modulo di carica wireless (da acquistare separatamente) / Módulo de carga inalámbrica (se adquiere por separado) / Module Draadloos opladen (afzonderlijk aan te schaffen) / Módulo de carregamento sem fios (a adquirir separadamente) / Модуль беспроводной зарядки (приобретается отдельно) / Модуль бездротового зарядження (слід купувати окремо) Charging Mode / Mode de charge / Lademodus / Modalità di carica / Modo de carga / Laadmodus / Modo de carregamento / Режим зарядки / Режим зарядження Device switching / Changement d'appareil / Gerätewechsel / Cambio dispositivo / Cambio de dispositivo / Apparaat omschakelen / Troca de Dispositivo / Переключение устройств / Перемикання пристрою Wired Connection: The green light of the connection indicator is on for 3 seconds, while the white light of the power indicator stays on, and charging is carried out during connection and use. Connexion filaire : L’indicateur vert de l'indicateur de connexion est allumé pendant 3 secondes, et l’indicateur blanc de l'indicateur d'alimentation reste allumé et la recharge est effectuée pendant la connexion et l'utilisation. Kabelverbindung: Die grüne Verbindungsanzeige leuchtet 3 Sekunden auf, während die weiße Betriebsan- zeige dauerhaft leuchtet und die Aufladung während der Verbindung und Verwendung durchgeführt wird. Connessione cablata: La spia verde dell'indicatore di connessione rimane accesa per 3 secondi, mentre la spia bianca dell'indicatore di alimentazione rimane accesa e la carica viene eseguita durante la connessione e l'uso. Conexión cableada: La luz verde del indicador de conexión se enciende durante 3 segundos, mientras que la luz blanca del indicador de alimentación permanece encendida y la carga se lleva a cabo durante la conexión y el uso. Bekabelde aansluiting: het groene lampje van de verbindingsindicator licht op gedurende 3 seconden terwijl het witte lampje van de voedingsindicator opgelicht blijft en het opladen wordt uitgevoerd tijdens de verbinding en het gebruik. Ligação com fio: A luz verde do indicador de ligação acende durante 3 segundos, enquanto a luz branca do indicador de energia permanece acesa, e o carregamento é efetuado durante a ligação e utilização. Проводное соединение: зеленый свет индикатора подключения будет гореть в течение 3 секунд, в то время как индикатор питания, горящий белым светом, остается включенным, зарядка будет выполняться во время подключения и использования. Дротове підключення: Зелений індикатор підключення світиться 3 секунди, а білий індикатор живлення продовжує світитися, і під час підключення і використання відбувається зарядження. Briefly press the channel switch button to change among 3 paired devices. Appuyez brièvement sur le bouton de changement de canal pour passer d'un appareil à l'autre. Drücken Sie zum Umschalten zwischen 3 gekoppelten Geräten kurz die Kanalwechsel-Taste. Premere rapidamente il pulsante per il cambio del canale per cambiare dispositivo tra i 3 dispositivi associati. Presione brevemente el botón de cambio de canal para cambiar entre 3 dispositivos emparejados. Druk even op de kanaalknop om tussen drie gekoppelde apparaten te kiezen. Pressione rapidamente o botão de troca de canal para alternar entre os 3 dispositivos pareados. Для переключения между тремя сопряженными устройствами коротко нажимайте кнопку переключения каналов. Коротко натисніть кнопку перемикання каналів, щоб перемикатися між 3 поєднаними у пару пристроями. Wired Mode / Mode filaire / Kabelmodus / Modalità cablata / Modo cableado / Bekabelde modus / modo com fios / Проводной режим / Дротовий режим Install driver / Installez le pilote / Treiber installieren / Installa driver / Instalar controlador / Stuurprogramma installeren / Instalação do controlador / Установить драйвер / Інсталяція драйвера www.rapoo.com MT760NL Cross-device transmission function / Fonction de transmission multi-appareils / Geräteübergreifende Übertragungsfunktion / Funzione trasmissione cross-device / Función de transmisión entre dispositivos / Transmissiefunctie tussen apparaten. / Função de transmissão entre dispositivos / Функция передачи данных между устройствами / Функція передачі між пристроями File transmission can be done by copying and pasting under Windows when mice is connected with NearLink USB mode, all paired devices are installed with driver and connected with same LAN in the same domain. File transmission doesn't support drag and drop among devices. La transmission de fichiers peut se faire par copier-coller sous Windows lorsque la souris est connectée en mode USB NearLink, que tous les appareils appariés disposent du pilote installé et …

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 ShenZhen Rapoo Technology Co., Ltd. Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: ShenZhen Rapoo Technology Co., Ltd. FCC ID: PP23399 To whom it may concern, ShenZhen Rapoo Technology Co., Ltd. (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. Jerry Guo Director ShenZhen Rapoo Technology Co., Ltd. 2025.12.24

ShenZhen Rapoo Technology Co., Ltd. [2025.5.13] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement ShenZhen Rapoo Technology Co., Ltd. FCC ID: PP23399 To Whom It May Concern: We, ShenZhen Rapoo Technology Co., Ltd., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number PP23399 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 13 May 2025). The Limited Agency Agreement expires on (12 May 2026), unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Jerry Guo Director

[2025.5.13] Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Jerry Guo Director ShenZhen Rapoo Technology Co., Ltd.

1(2) ShenZhen Rapoo Technology Co., Ltd. Attention: Certification reviewer RE: Request for Confidentiality FCC ID: PP23399 To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description Tune-up Procedure 2(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, Jerry Guo Director 2025.5.13

TEST REPORT TEST REPORT TEST REPORT

3mm 12mm

TEST REPORT 2.4G Antenna TEST REPORT

INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is a dongle with 2.4G function operating in 2402-2480MHz. The EUT is powered by DC 5V by USB. For more details information pls. refer to the user manual. 2.4G function: Antenna Type: Integral antenna Antenna Gain: 1.92 dBi max Modulation Type: GFSK The nominal conducted output power specified: -4.15 dBm (+/-2dB). The nominal radiated output power (e.i.r.p) specified: -2.23dBm (+/-2dB). According to the KDB 447498 V07: The maximun peak radiated emission for the EUT is 93.0dBμV/m at 3m in the frequency 2480MHz The EIRP = [(FS*D) ^2 / 30] mW = -2.23dBm which is within the production variation. The maximun conducted output power specified is -4.15 dBm = 0.384592mW The source- based time-averaging conducted output power = 0.384592mW 1-mW Test Exemption: Since the source-based time-averaging conducted output power is well below 1-mW Test Exemption, per KDB 447498 V07 and §1.1307 (b) (3) (i) (A), the EUT is considered to comply with SAR requirement without testing and no evaluation is required. FCC ID: PP23399

ShenZhen Rapoo Technology Co., Ltd. TEST REPORT SCOPE OF WORK FCC TESTING–03060N REPORT NUMBER 250513030SZN-001 ISSUE DATE [REVISED DATE] 30 December 2025 [---------------------] PAGES 28 DOCUMENT CONTROL NUMBER FCC ID 249_C © 2017 INTERTEK Intertek Report No.: 250513030SZN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen, P.R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 28 FCC ID 249_C Test Report ShenZhen Rapoo Technology Co., Ltd. Application For Certification FCC ID: PP23399 dongle Model: 03060N Brand Name: RAPOO 2.4GHz Transceiver Report No.: 250513030SZN-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-24] Prepared and Checked by: Approved by: Draven Li Sr. Project Engineer Johnny Wang Project Engineer Date: 30 December 2025 Intertek Report No.: 250513030SZN-001 Version: 01-November-2017 Page: 2 of 28 FCC ID 249_C Test Report MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class I Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-24 Edition] provision. Report prepared by: Draven Li Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen, P.R. China Tel / Fax: 86-755-8614 0743/86-755-8601 6661 Intertek Report No.: 250513030SZN-001 Version: 01-November-2017 Page: 3 of 28 FCC ID 249_C Test Report Table of Contents 1.0 Summary of Test Result ................................................................................................. 4 2.0 General Description ...................................................................................................... 5 2.1 Product Description .................................................................................................... 5 2.2 Related Submittal(s) Grants ......................................................................................... 5 2.3 Test Methodology ...................................................................................................... 5 2.4 Test Facility ............................................................................................................... 5 3.0 System Test Configuration ............................................................................................. 6 3.1 Justification ............................................................................................................... 6 3.2 EUT Exercising Software .............................................................................................. 6 3.3 Special Accessories ..................................................................................................... 6 3.4 Equipment Modification .............................................................................................. 7 3.5 Measurement Uncertainty .......................................................................................... 7 3.6 Support Equipment List and Description ........................................................................ 7 4.0 Emission Results ........................................................................................................... 8 4.1 Radiated Test Results .................................................................................................. 8 4.1.1 Field Strength Calculation ......................................................................................... 8 4.1.2 Radiated Emission Configuration Photograph .............................................................. 9 4.1.3 Radiated Emissions .................................................................................................. 9 4.1.4 Transmitter Spurious Emissions ............................................................................... 12 4.2 Conducted Emission Configuration Photograph ............................................................ 16 4.2.1 Conducted Emission ............................................................................................... 16 5.0 Equipment Photographs .............................................................................................. 19 6.0 Product Labelling ........................................................................................................ 19 7.0 Technical Specifications ............................................................................................... 19 8.0 Instructi…

Text truncated - open the document above for the full version.

Page 1 of 1 TEST REPORT CONDUCTED EMISSION TEST SET-UP Front View Slide View

Page 1 of 2 TEST REPORT RADIATED EMISSION TEST SET-UP Front View (Below 1GHz) Back View (Below 1GHz) The EUT is placed at the center of turntable Page 2 of 2 TEST REPORT Front View (Above 1GHz) Back View (Above 1GHz) The EUT is placed at the center of turntable