PP29060MSWireless Optical Mouse

Power On. Push. Plug the receiver into the usb port. The receiver will match the mouse automatically. Open the cover to change battery. Place the battery right as the sign . ப߭䐘俠Ұㄥ࢝௵ 8'655ப߭ RAPOO FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that i nterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance cou ld void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:1) This device may not cause interference and2) This device must accept any interference, including interference that may cause undesired operation of the device.Caution!The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Su ch modifications could void the user authority to operate the equipment. Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NCC ḍ᪮Ԣࡳ⥛䳏⊶䔏ᇘᗻ䳏′′ᄣ⧚䕺⊩㽣ᅮ˖㄀कѠṱ15点ᔶᓣ䁡䄝ড়ḐПԢࡳ⥛ᇘ丏䳏′′ˈ䴲15点䀅ৃˈ݀ৌǃଚ㰳៪Փ⫼㗙ഛϡᕫ᪙㞾䅞᳈丏⥛ǃࡴ໻ࡳ⥛៪䅞᳈ॳ䀁㿜П⡍ᗻঞࡳ㛑DŽ㄀कಯṱԢࡳ⥛ᇘ丏䳏′′ПՓ⫼ϡᕫᕅ䷓亯㟾ᅝܼঞᑆ᫒ড়⊩䗮ֵ˗15点ⱐ⧒᳝ᑆ᫒⧒䈵ᰖˈឝゟेذ⫼ˈᑊᬍ୘㟇⛵ᑆ᫒ᰖᮍᕫ㑐㑠Փ⫼DŽࠡ䷙ড়⊩䗮ֵˈᣛձ䳏ֵ㽣ᅮ԰ὁП⛵㎮䳏ֵDŽԢࡳ⥛ᇘ丏䳏′′䷜ᖡফড়⊩䗮ֵ៪Ꮉὁǃ里ᅌঞ䝿Ⱆ⫼䳏⊶䔏ᇘᗻ䳏′′䀁٭Пᑆ᫒DŽ ON USB 1.5V AA*1 030372.4G Mini Receiver2.4G Frequency Range/ : 2402~2479 MHz Channel No./ : 16 Modulation Type / : GFSK Date Rate/ : 1Mbps 2.4G Mini Receiver user guide1. Plug the Mini Receiver into a USB port of your computer.2. Turn on the Wireless Optical Mouse.3. Move the Wireless Optical Mouse to get connected with the Mini Receiver. 030372.4G Mini Receiver2.4G

9060MS Wireless Optical Mouse Quick Start Guide(V1.1) size:W297mm X H455mm 80g书纸 先风琴再对折 ON OFF - 5613-11500-222 Warranty The device is provided with one-year limited hardware warranty from the purchase day. Please see www.rapoo.com/warranty for more information. See www.rapoo.com/9060/faq for latest FAQs, drivers and quick start guide. For extensive service, register at www.rapoo.com/register. Troubleshooting Do not open or repair this device. Do not use the device in a damp environment. Clean the device with a dry cloth. Safety instructions Copyright It is forbidden to reproduce any part of this quick start guide without the permission of Rapoo Technology Co., Ltd. 质保条款 本設備提供自購買之日起1年的有限產品硬體保固服務，具體詳情請查閱www.rapoo.com/warranty。 請到www.rapoo.com/9060/faq查閱最新常見問題、請到www.rapoo.com/9060/download下載最新的 驅動和快速安裝指南。如需延長服務，請到www.rapoo.com/register註冊。 故障分析 請不要打開或修理該設備,不要在潮濕的環境使用該設備,用幹布擦拭該設備。 安全提醒 智慧財產權資訊 未經雷柏的許可，禁止複製本快速安裝指南的內容。 质保条款 本设备提供自购买之日起1年的有限产品硬件保修服务，具体详情请查阅www.rapoo.com/warranty。 请到www.rapoo.com/9060/faq查阅最新常见问题、请到www.rapoo.com/9060/download下载最新的驱动和 快速安装指南。如需延长服务，请到www.rapoo.com/register注册。 故障分析 请不要打开或修理该设备。请不要在潮湿的环境使用该设备。请用干布擦拭该设备。 安全提醒 知识产权信息 未经雷柏的许可，禁止复制本快速安装指南的内容。 보증 안전 지침 이 장치를 열거나 수리하지 마십시오. 장치를 습한 환경에서 사용하지 마십시오. 장치를 마른 걸레로 닦으십시오. 이 장치에는 구매일로부터 1년간의 유한 하드웨어 보증이 제공됩니다. 자세한 내용은 www.rapoo.com/warranty을 참조하십시오. 저작권 이 간편 시작 설명서의 어떤 부분도 Rapoo Technology Co., Ltd.의 허가 없이 복제될 수 없습니다. 최근 미국의 소리는 이런 곳, 드라이버 및 퀵 스타트 가이드에 대한 www.rapoo.com/9060/faq를 참조하십시오. 광범위한 서비스를 위해,에 등록 www.rapoo.com / 등록하십시오. 문제 해결 产品中有毒有害物质或元素的名称及含量 根据中国《电子信息产品污染控制管理办法》 电路板组件 PWAs 塑料部件Plastic parts 薄膜 Membrane 金属部件 Metal parts 橡胶圆盖 Rubber dome ○=表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006标准规定的限量 要求以下。 注：环保使用期限的参考标取决于产品正常工作的温度和湿度等条件。 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (CrVI 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 电缆 Cable 键盘 ○○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○○○○○ ○ ○○○○○○ 部件名称 有毒有害物质或元素 Company name Address Tel# AV FUTURE LINK SDN BHD NO.23A,JALAN 5/152,TAMAN PERINDUSTRIAN OUG,PUCHONG,58200 KUALA LUMPUR ,MALAYSIA (+0060)377830011 Hongkong 臺灣 中国大陆 Việt Nam Malaysia Vim Yield Company 香港九龍官塘成業街20號怡生工業大廈2字樓全層 852-31522789 DescriptionInformationCountry (or area) Company name Address Tel# Tên công ty địa chỉ điện thoại 公司名称 地址 电话 CÔNG TY CỔ PHẦN KỸ THUẬT CÔNG NGHỆ NAM THÀNH Số 7, lô 14A, khu đô thị mới Trung Yên, đường Trung Hòa, quận Cầu Giấy, Hà Nội, Việt Nam 0084-4-37834530 連鈺電子有限公司79號13樓 新北市汐止區新台五路一段 02 2698 1965 深圳雷柏电子有限公司 深圳福华三路卓越世纪中心4号楼33层 4008 887 778 公司名稱 地址 電話 补偿 在保质期内，您享有以下售后权利（1）7天内出现质量问题，根据国家“三包”规定于产 品外观与包装完整的情况下，将硬件退还给购买地点或者雷柏指定地点，凭购买的有效凭 证，退回您所支付的硬件产品货款。（2）60天内出现产品质量问题，您可以到购买地点 或者雷柏指定地点更换硬件产品，或者到雷柏指定的维修网点保修。更换之后的硬件保质 期为原保质期的剩余天数。（3）1年内出现产品质量问题，您可以到雷柏指定的维修网点 保修。（4）凡购买N系列产品的客户，1年内产品出现质量问题，您可以前往雷柏经销商 处更换新品。 质保限制 本有限质保不涵盖由于以下原因导致的问题或损坏：（1）意外事件、误用、操作不当或 任何未授权的维修、改装或者拆卸；（2）操作或维护不当，适用过程中违反产品说明或 连接到不适当的电压源；（3）或者适用并非由雷柏提供的消耗品（如备用电池），但适 用法律禁止此类限制的情况除外。 RAPOO 雷柏 RAPOO FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Power on. Push. Press down the button. Remove the cover and change the battery correctly. Close the cover. NCC 根據低功率電波輻射性電機管理辦法規定： 第十二條 經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，并改善至 無干擾時方得繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電 波輻射性電機設備之干擾。 ON 03037 2.4G Mini Receiver 2.4G USB Plug the receiver into the usb port. The receiver will match the mouse automatically. 2.4G Mini Receiver user guide 1. Plug the Mini Receiver into a USB port of your computer. 2. Turn on the Wireless Optical Mouse. 3. Move the Wireless Optica…

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Shenzhen Rapoo Technology Co., Ltd would like the following documents regarding this submission for FCC ID: PP29060MS to be kept confidential. 1. Schematic 2. Block diagram 3. Operational description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Charles Zou Oct 27, 2011

Oct 27, 2011 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Shenzhen Rapoo Technology Co., Ltd. Sincerely, Signature: ....................................... Name: Charles Zou Title: R&D Manager

Model Declaration Letter We, the undersigning company Company Name: ShenZhen Rapoo Technology Co., Ltd. Address: Block A1,B1, B2, 1st second stage, 1st Industrial Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China Hereby confirm that the following products: Product description: Wireless Optical Mouse Type designation: 9060MS;1620 Brand: RAPOO That The Model 9060MS and 1620 are electrically equal and only the enclosures and model name differs. Company Name: ShenZhen Rapoo Technology Co., Ltd. Address: Block A1,B1, B2, 1st second stage, 1st Industrial Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China Telephone: +86-755-2732 7528 FAX: +86-755-2732 7498 E-mail: [email protected] Signature: ________________________ Name: Charles Zou

Neutron Engineering Inc. Project No.: 1110C211 Page 2 of 8 Model: 9060MS 1110C211 1110C211 Neutron Engineering Inc. Project No.: 1110C211 Page 2 of 8 Model: 9060MS 1110C211 1110C211 Neutron Engineering Inc. Project No.: 1110C211 Page 3 of 8 Model: 1620 Neutron Engineering Inc. Project No.: 1110C211 Page 3 of 8 Model: 1620

9060MS Label & Label location 1620 Label& Label location

Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 1 of 57 FCC/IC Radio Test Report FCC ID: PP29060MS IC: 7497B-9060MS This report concerns (check one): Original Grant Class II Change Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 25 2011 Date of Test: Oct. 25, 2011 ~ Oct. 31, 2011 Testing Engineer : (Ivan Cao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Issued Date : Nov. 02, 2011 Project No. : 1110C211 Equipment : Wireless Optical Mouse Model Name : 9060MS;1620 Applicant : ShenZhen Rapoo Technology Co., Ltd. Address : Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone ,Fenghuang Fuyong, BaoAn , Shenzhen, P.R.CHINA Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 2 of 57 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 3 of 57 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 MEASUREMENT INSTRUMENTS LIST 17 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BELOW 30MHz) 22 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 23 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 31 4.2.10 TEST RESULTS (2400 – 2483.5 MHz) 45 5 . BANDWIDTH TEST 46 5.1 MEASUREMENT INSTRUMENTS LIST 46 5.2 TEST PROCEDURE 46 5.3 DEVIATION FROM STANDARD 46 5.4 TEST SETUP 46 5.5 EUT OPERATION CONDITIONS 46 5.6 TEST RESULTS 47 Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 4 of 57 Table of Contents Page 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 49 6.1 APPLIED PROCEDURES / LIMIT 49 6.1.1 MEASUREMENT INSTRUMENTS LIST 49 6.1.2 TEST PROCEDURE 49 6.1.3 DEVIATION FROM STANDARD 49 6.1.4 TEST SETUP 49 6.1.5 EUT OPERATION CONDITIONS 49 6.1.6 TEST RESULTS 50 7 . EUT TEST PHOTO 55 Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 5 of 57 1. CERTIFICATION Equipment : Wireless Optical Mouse Brand Name : RAPOO Model Name. : 9060MS;1620 A p p l i c a n t : ShenZhen Rapoo Technology Co., Ltd. Date of Test : Oct. 25, 2011 ~ Oct. 31, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2003 ; Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1110C211) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 6 of 57 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission N/A Note(1) 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) The EUT used new battery. Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 7 of 57 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，provid…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 55 of 57 7. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 55 of 57 7. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 56 of 57 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 56 of 57 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 57 of 57 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1110C211 Page 57 of 57 Radiated Measurement Photos Above 1000MHz