PP2E1050Wireless Keyboard

8'655ப߭ PUSH Open the cover to change battery. 1.5V AA*1 Place the battery right as the sign . 03037 2.4G Mini Receiver 2.4G USB Plug the receiver into the usb port. The receiver will match the keyboard automatically. Frequency Range/ : 2402~2479 MHz Channel No./ : 16 Modulation Type / : GFSK Date Rate/ : 1Mbps RAPOO FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NCC ḍ᪮Ԣࡳ⥛䳏⊶䔏ᇘᗻ䳏′′ᄣ⧚䕺⊩㽣ᅮ˖ ㄀कѠṱ 15点ᔶᓣ䁡䄝ড়ḐПԢࡳ⥛ᇘ丏䳏′′ˈ䴲15点䀅ৃˈ݀ৌǃଚ㰳៪Փ⫼㗙ഛϡᕫ᪙㞾䅞᳈丏⥛ǃࡴ໻ࡳ⥛៪䅞 ᳈ॳ䀁㿜П⡍ᗻঞࡳ㛑DŽ ㄀कಯṱ Ԣࡳ⥛ᇘ丏䳏′′ПՓ⫼ϡᕫᕅ䷓亯㟾ᅝܼঞᑆ᫒ড়⊩䗮ֵ˗15点ⱐ⧒᳝ᑆ᫒⧒䈵ᰖˈឝゟेذ⫼ˈᑊᬍ୘㟇 ⛵ᑆ᫒ᰖᮍᕫ㑐㑠Փ⫼DŽ ࠡ䷙ড়⊩䗮ֵˈᣛձ䳏ֵ㽣ᅮ԰ὁП⛵㎮䳏ֵDŽԢࡳ⥛ᇘ丏䳏′′䷜ᖡফড়⊩䗮ֵ៪Ꮉὁǃ里ᅌঞ䝿Ⱆ⫼䳏 ⊶䔏ᇘᗻ䳏′′䀁٭Пᑆ᫒DŽ M/N˖ Rating: Approval No: CMIIT ID:

Shenzhen Rapoo Technology Co., Ltd. To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: PP2E1050 Dear FCC TCB: 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Schematic Block diagram Operational description Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Sincerely, Date: 2012-11-7 City: Shenzhen Name: Charles Tsou Function: Director of Research and Development Centre Signature:

Declaration of Authorization We Name: Shenzhen Rapoo Technology Co., Ltd Address: 22, Jinxiu Road East, Pingshan District，Shenzhen，China Declare that: Name Representative of agent: Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s): Product description: Wireless keyboard Type designation: E1050 Trademark: RAPOO on our behalf. Date: 2012-11- 7 City: Shenzhen Name: Charles Tsou Function: Director of Research and Development Centre Signature:

Neutron Engineering Inc. Project No.: 1111C076C Page 2 of 6 1111C076C 1111C076 C

E1050 LABEL AND LABDE LOCATON

Neutron Engineering Inc. Project No.: 1111C076C Page 3 of 6 1111C076C 1111C076 C Neutron Engineering Inc. Project No.: 1111C076C Page 4 of 6 1111C076C 1111C076 C Neutron Engineering Inc. Project No.: 1111C076C Page 5 of 6 1111C076C 1111C076 C Neutron Engineering Inc. Project No.: 1111C076C Page 6 of 6 1111C076C

Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 1 of 56 FCC/IC Radio Test Report FCC ID: PP2E1050 IC: 7497B-E1050 This report concerns (check one): Original Grant Class II Change Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 18, 2012 Date of Test: Oct. 18, 2012 ~ Nov. 03, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Issued Date : Nov. 05, 2012 Project No. : 1111C076C Equipment : Wireless Keyboard Model Name : E1050 Applicant : Shenzhen Rapoo Technology Co., Ltd. Address : 22,Jinxiu Road East,Pingshan District, Shenzhen, China Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 2 of 56 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 3 of 56 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 MEASUREMENT INSTRUMENTS LIST 17 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BELOW 30MHz) 22 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 23 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 31 5 . BANDWIDTH TEST 45 5.1 MEASUREMENT INSTRUMENTS LIST 45 5.2 TEST PROCEDURE 45 5.3 DEVIATION FROM STANDARD 45 5.4 TEST SETUP 45 5.5 EUT OPERATION CONDITIONS 45 5.6 TEST RESULTS 46 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 48 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 4 of 56 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 48 6.1.1 MEASUREMENT INSTRUMENTS LIST 48 6.1.2 TEST PROCEDURE 48 6.1.3 DEVIATION FROM STANDARD 48 6.1.4 TEST SETUP 48 6.1.5 EUT OPERATION CONDITIONS 48 6.1.6 TEST RESULTS 49 7 . EUT TEST PHOTO 54 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 5 of 56 1. CERTIFICATION E q u i p m e n t : Wireless Keyboard Brand Name : RAPOO Model Name. : E1050 A p p l i c a n t : Shenzhen Rapoo Technology Co., Ltd. Date of Test : Oct. 18, 2012 ~ Oct. 26, 2012 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2009; Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1111C076C) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 6 of 56 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission N/A Note(1) 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) The EUT used new battery. Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 7 of 56 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Method Measurement Frequency …

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 54 of 56 7. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 55 of 56 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C076C Page 56 of 56 Radiated Measurement Photos Above 1000MHz