PP2H6020Bluetooth stereo headset

安裝步驟 Installation 1 2 3 耳麥在關機狀態下，長按電源開關約8秒，電源指示燈亮起并快速閃爍，即進入配對狀態。 When the headset is off, Press the power button for 8 seconds, the Power LED blinks quickly indicating entering pairing mode. 設備顯示連接成功，電源指示燈進入慢閃狀態即可正常使用。 注：藍牙耳麥自動存儲配對連接設備的資訊，後續使用時耳麥直接開機 即可自動連接，無需重新進行配對連接操作。 語音通話Calling control 90°旋轉式耳罩90° rotatable ear cover 可將耳罩旋轉90 ° 平放，方便攜帶。 耳麥開機狀態下，30分鐘無連接將會自動關機。 自動關機功能 Automatically Power Off When being used, the headset will automatically power off if no connection in 30 minutes. 藍牙耳麥支援語音通話功能。與手機連接時，如有電話打入，耳麥 會發出提醒音，短按電源開關即可接通電話。通話結束時，短按電 源開關鍵即可掛斷電話。長按電話開關可拒接電話。 If there is an incoming call while listening to music, you will get a note from the headset. Shortly press power button to answer/end the call, and long press it to reject the call. The power LED blinking slowly means the Bluetooth connected successfully. Note: The Bluetooth headset will save connected device automatically, you don’t have to pair it. Package contents 1.Headset 2.USB charging cable 包裝內容 1.耳麥 2.USB充電線 H6020 Bluetooth Stereo Headset Quick Installation Guide 1)電源開關 2)電源指示燈 3)USB充電接口 4)充電指示燈 5)內置麥剋風 Headset scheme 1)Power button 2)Power LED 3)USB charging port 4)Charging LED 5)Built-in microphone １）電源開關 ２）配對 ３）接聽 ４）掛斷 ５）拒接 ６）播放/暫停 ７）音量加減 1)Power button 2)Pairing 3)Answering a call 4)Ending a call 5)rejecting a call 6)Play/Pause 7)Volume+/- 電源開關的功能Power button functions Volume+ Volume- On 90° 耳麥功能示意圖 On On 耳麥兩側的頭帶可以伸縮，可根據個人情況調節頭帶長度，以便更舒適更輕鬆地 享受音樂。 注：將頭帶旋轉90 °平放後，不能再拉頭帶，否則會將頭帶拉壞。調節頭帶時， 將頭帶拉到位後，再用大力拉會拉壞頭帶。 頭帶調節 Pull out and in the headband to adjust the length of the headband for different users. Note: Please do not pull the headband after it is rotated 90 ° , or it will go bad easily.Please do not pull the headband heavily when it is pushed in place,or it will go bad. Headband adjustment 啟動設備的藍牙功能，設備搜索到藍牙耳麥。輸入連接密碼為 “0000”,連接藍牙耳麥。 Start the device Bluetooth function, the headset found a Bluetooth device. Input the “0000” to connect the Bluetooth device. 充電 耳麥內置鋰電池，可用隨機 附贈的USB充電線充電。 將耳機連接到USB充電線， 將充電線的另一端連接到電 腦的USB埠上即可充電。 充電時充電指示燈長亮，充 電時間約3小時，充滿電時 充電指示燈會熄滅，電源指 示燈常亮。 當電壓不足時，充電指示燈 閃爍，提醒充電後使用。 The headset has a built-in Lithium battery, which can be charged by the attached USB cable. Connect the headset to the USB charging cable, and connect the cable to your computer. The charging LED will be on when charging, the full charging time is about 3 hours, and it will be off when the battery is fully chargedthe power LED will be on. While being used, a blinking charging LED on the headset means the headset needs charging. Charging 1 2 故障分析 現象：配對連接不成功 解決辦法：1. 確認連接設備的藍牙功能已經開啟並工作正常； 2. 檢查耳麥電池是否電量不足，充電後再使用； 3. 匹配過程中, 不要同時打開多台藍牙耳麥或藍牙設備，同時有多台藍牙耳麥時， 確認匹配耳 麥為開 機狀態,關閉其他耳麥，防止干擾匹配過程； 4. 確認耳麥處於匹配狀態和輸入的藍牙配對密碼正確； 5. 如以上方法仍不能解決此問題，請重新配對，參考耳麥配對與連接說明。 現象：接收距離短 解決辦法：藍牙耳麥與家用無線網路設備、微波爐、無線電等同頻率時使用可能會互相干擾，使用時儘量與 上述設備保持距離。 現象：無法通過耳麥聽音樂或接打電話 解決辦法：1.增大耳麥的音量； 2.確認此時耳麥與所連設備已經成功連接。 現象：與筆記本連接成功，但播放音樂時耳麥沒有聲音 解決辦法：對於部分帶藍牙功能的筆記本，並不一定帶有支援身歷聲藍牙耳麥功能的驅動(具體請參見筆記本 的系統說明)。此時建議下載免費的藍牙驅動，如IVT軟體等，然後重新連接藍牙耳麥。 Troubleshooting Problem: Unsuccessful connection Solution: 1.Make sure you have started the Bluetooth function of device,and it works normally,; 2.Make sure you have charged the headset; 3.Please do not turn on several Bluetooth devices or Bluetooth headsets , make sure the paired headset is turned on, and turned off other devices or headsets to prevent interfering pairing. 4.Make sure the headset is at pairing status and the pairing passkey is right. 5.Please pair it again according to pairing description, if you can not solve it yet. Problem: Interference with other devices Solution: Move the bluetooth headset away from other wireless devices working at the same frequency, such as wireless network device, microwave oven, wireless telephone and so on. Problem: I can not hear music sound or my friend does not hear what I’m saying Solution: Increase the headset volume and check if wireless headset is connected to the device. Problem: I can not hear music sound even though it is connected to the device. Solution: Some Bluetooth laptops does not have sterio Bluetooth driver(please see the system description of laptop for more information), it is recommended to download a free Bluetooth driver such as IVT software, and then connect the laptop to the headset again. 符合性聲明 深圳雷柏科技股份有限公司特此聲明：本設備符合1995/5/EC指令的基本要求和其他相關條款。 Declaration of conformity Hereby, Shenzhen Rapoo Technology Co., Ltd declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC. 安全提醒 請不要打開或修理該設備。請不要在潮濕的環境使用該設備。請用幹布擦拭該設備。 Safety instructions Do not open or repair this device. Do not use the device in a damp environment. Clean the device with a dry cloth. 質保條款 本設備提供自購買之日起2年的有限產品硬體保修服務，具體詳情請查閱www.rapoo.com/warranty Warranty The device is provided with two-year limited hardware warranty from the purchase day. Please see www.rapoo.com/warranty for more information. 知識產權信息 未經雷柏的許可，禁止複製本快速安裝指南的內容。 Copyright It is forbidden to reproduce any part of this quick start guide without the permission of Rapoo Technology Co., Ltd. The ear cover can be rotated 90 ° to be parallel with headband,which facilitates you. H6020 Bluetooth Stereo Headset Quick Installation Guide DGT警语 根據交通部低功率管理辦法規定： 第十二條 經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更 原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，并改善至無 干擾時方的繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波 輻射性電機設備之干擾 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause har…

Text truncated - open the document above for the full version.

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY (DoC) FOR THE FOLLOWING EQUIPMENT: PRODUCT NAME: Bluetooth stereo headset MODEL NO.: H6020 TRADE NAME: RAPOO IS HEREWITH CONFIRMED AND FOUND TO COMPLY WITH THE REQUIREMENTS OF CFR 47 PART 15 REGULATION. THE RESULTS OF ELECTROMAGNETIC EMISSION EVALUATION ARE SHOWN IN THE REPORT NO.: NEI-FCCE-1-1107C026, ISSUED ON Jul. 15, 2011 Testing lab: Neutron Engineering, Inc. Address: B1,No.37,Lane 365,Yang Guang St.,NeiHu District 114.,Taipei,Taiwan THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND; (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THE FOLLOWING MANUFACTURER/IMPORTER IS RESPONSIBLE FOR THIS DECLARATION: Shenzhen Rapoo Technology Co., Ltd (COMPANY NAME) Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, China (COMPANY ADDRESS) TEL : +86 755 2732 7528 Charles Zou, R&D Manager (NAME) (TITLE) _____________________________________________ 2011-08-15 (SIGNATURE) (DATE)

DATE：2011-07-18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: PP2H6020 Product Name: Bluetooth stereo headset Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2011-07-18 By: Charles Zou Signature Printed Title: R&D Manager On behalf of : ShenZhen Rapoo Technology Co., Ltd. Telephone: +86 755 2732 7528

DATE：2011-7-18 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Company name: Neutron Engineering Inc. Ms. Cathy Wang Address:No.3, JinShaGang 1 st Road, ShiXia, DaLang Town， City: Dong Guan Country: China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Company name: ShenZhen Rapoo Technology Co., Ltd. .Address: Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, City: Shenzhen Country: China Dated this 2011-07-18 Agency agreement expiration date: Usually Give 8 - 12 Months By: Charles Zou Signature Printed Title: R&D Manager On behalf of : ShenZhen Rapoo Technology Co., Ltd. Telephone: +86 755 2732 7528

Neutron Engineering Inc. Project No.: 1107C026 Page 2 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 2 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 3 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 3 of 9 1107C026 1107C026

Neutron Engineering Inc. Project No.: 1107C026 Page 4 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 4 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 5 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 5 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 6 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 6 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 7 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 7 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 8 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 8 of 9 1107C026 1107C026 Neutron Engineering Inc. Project No.: 1107C026 Page 9 of 9 1107C026

Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 1 of 110 FCC/IC Radio Test Report FCC ID: PP2H6020 IC: 7497B-H6020 This report concerns (check one) : Original Grant Class II Change Issued Date : Jul. 15, 2011 Project No. : 1107C026 Equipment : Bluetooth stereo headset Model Name : H6020 Applicant : ShenZhen Rapoo Technology Co., Ltd. Address : Block A1,B1,B2,1st second stage, 1st Industrial Park, 3rd Industrial Zone, Fenghuang Fuyong, BaoAn, Shenzhen, P.R.CHINA Testing Engineer : (Ivan Cao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul. 07, 2011 Date of Test: Jul. 07, 2011 ~ Jul. 14, 2011 Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 2 of 110 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limit ation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 3 of 110 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 26 5 . NUMBER OF HOPPING CHANNEL 62 5.1 APPLIED PROCEDURES / LIMIT 62 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 62 5.1.2 TEST PROCEDURE 62 5.1.3 DEVIATION FROM STANDARD 62 5.1.4 TEST SETUP 62 5.1.5 EUT OPERATION CONDITIONS 62 5.1.6 TEST RESULTS 63 Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 4 of 110 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 65 6.1 APPLIED PROCEDURES / LIMIT 65 6.1.1 MEASUREMENT INSTRUMENTS LIST 65 6.1.2 TEST PROCEDURE 65 6.1.3 DEVIATION FROM STANDARD 65 6.1.4 TEST SETUP 66 6.1.5 EUT OPERATION CONDITIONS 66 6.1.6 TEST RESULTS 67 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 79 7.1 APPLIED PROCEDURES / LIMIT 79 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 79 7.1.2 TEST PROCEDURE 79 7.1.3 DEVIATION FROM STANDARD 79 7.1.4 TEST SETUP 79 7.1.5 EUT OPERATION CONDITIONS 79 7.1.6 TEST RESULTS 80 8 . BANDWIDTH TEST 84 8.1 APPLIED PROCEDURES / LIMIT 84 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 84 8.1.2 TEST PROCEDURE 84 8.1.3 DEVIATION FROM STANDARD 84 8.1.4 TEST SETUP 84 8.1.5 EUT OPERATION CONDITIONS 84 8.1.6 TEST RESULTS 85 9 . PEAK OUTPUT POWER TEST 89 9.1 APPLIED PROCEDURES / LIMIT 89 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 89 9.1.2 TEST PROCEDURE 89 9.1.3 DEVIATION FROM STANDARD 89 9.1.4 TEST SETUP 89 9.1.5 EUT OPERATION CONDITIONS 89 9.1.6 TEST RESULTS 90 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 94 10.1 APPLIED PROCEDURES / LIMIT 94 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 94 10.1.2 TEST PROCEDURE 94 10.1.3 DEVIATION FROM STANDARD 94 10.1.4 TEST SETUP 94 10.1.5 EUT OPERATION CONDITIONS 94 Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 5 of 110 Table of Contents Page 10.1.6 TEST RESULTS 95 11 . RF EXPOSURE TEST 107 11.1 APPLIED PROCEDURES / LIMIT 107 11.1.1 MPE CALCULATION METHOD 107 11.1.2 DEVIATION FROM STANDARD 107 11.1.3 EUT OPERATION CONDITIONS 107 11.1.4 TEST RESULTS 108 12 . EUT TEST PHOTO 109 Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 6 of 110 1. CERTIFICATION E q u i p m e n t : Bluetooth stereo headset Brand Name : RAPOO Model Name : H6020 A p p l i c a n t : ShenZhen Rapoo Technology Co., Ltd. Date of Test: Jul. 07, 2011 ~ Jul. 14, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 / Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Re…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 94 of 95 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 109 of 110 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 95 of 95 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1107C026 Page 110 of 110 Radiated Measurement Photos