PVB-EMJC000One Drop (wireless charger)

FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.

The House of Marley.LLC Authority letter FCC Date: 4/2/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PVB-EMJC000 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with The House of Marley.LLC. This authorization is valid until further written notice from the applicant. Name (Printed): Josh Poulsen Title: Director of Product Development Signature: On behalf of Company: The House of Marley.LLC

The House of Marley.LLC Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: The House of Marley.LLC 3000 Pontiac Trail Commerce Township, Michigan, 48390, United States Regarding: Confidentiality Request regarding application for FCC ID: PVB-EMJC000 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Josh Poulsen Title: Director of Product Development Signature: On behalf of Company: The House of Marley.LLC

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Declaration Letter Applicant Legal Business Name The House of Marley.LLC Address 3000 Pontiac TrailCommerce Township, 48390, Michigan, United States Grantee Code PVB FCC ID PVB-EMJC000 Authorized Contact Name Josh Poulsen Contact Email [email protected] Contact Phone (248) 863-3001 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 4/2/2022 Print Name: Josh Poulsen Title: Director of Product Development *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

The House of Marley.LLC Cover Letter‐Wireless Charger Approval FCC ID:PVB-EMJC000 Date: 4/2/2022 Gentlemen: There’s a Wireless charging puck, that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Wireless charging puck, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company: The House of Marley.LLC Product Name: Wireless charging puck Model Number: EM-JC000 FCC ID: PVB-EMJC000 KDB 680106 D01 Section 5.b) Requirements: Product Technical Specification： Result: (1) Power transfer frequency is less than 1 MHz. 113.800- 138.163 kHz Complied (2) Output power from each primary coil is less than or equal to 15 watts. 10Watts Complied (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Only single primary coils Complied (4) Client device is placed directly in contact with the transmitter. The WPT client device is placed in direct contact with the WPT source. Complied (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Mobile exposure condition Complied (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Refer to MPE report GZCR220100005202 Complied Sincerely, Name (Printed): Josh Poulsen Title: Director of Product Development Signature: On behalf of Company: The House of Marley.LLC

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 5 Appendix External Photos for GZCR2201000052AT Test Model No.: EM-JC000 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 4 Appendix Internal Photos for GZCR2201000052AT Test Model No.: EM-JC000 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 2 of 4 EUT Constructional Details (EUT Photos) WPC ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220100005202 Page: 1 of 12 FCC ID: PVB-EMJC000 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2201000052AT Applicant:The House of Marley.LLC Address of Applicant:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer:The House of Marley.LLC Address of Manufacturer:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory:1. Dongguan Kailai Electronic Co., Ltd 2. YING TONG (VIETNAM) ELECTRONIC TECHNOLOGY COMPANY LIMITED Address of Factory:1. Building 2, No.6, Baisha Road, Changping, Dongguan City, Guangdong Province, China 2. Plot No. CN02-1-2, Lot No. CN02, Binh Xuyen II Industrial Park, Ba Hien Commune, Binh Xuyen District, Vinh Phuc Province, Vietnam Equipment Under Test (EUT): EUT Name:One Drop (wireless charger) Model No.: EM-JC000 Trade Mark:MARLEY Standard(s) : 47 CFR Part 1.1310 KDB 680106 D01 Date of Receipt: 2022-01-13 Date of Test: 2022-02-23 Date of Issue: 2022-04-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005202 EMC-TRF-01 Rev 1.0 Page: 2 of 12 Revision Record VersionReport No.DateRemark 01GZCR2201000052022022-04-13Original Authorized for issue by: Kevin Zhang /Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005202 EMC-TRF-01 Rev 1.0 Page: 3 of 12 2Test Summary Radio Spectrum Matter Part ItemStandardMethodRequirementResult Electric Field & Magnetic field strength 47 CFR Part 1.1310 KDB 680106 D01 47 CFR Part 1.1310 & KDB 680106 D01 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005202 EMC-TRF-01 Rev 1.0 Page: 4 of 12 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Description of Support Units..............................................................................................................5 4.3Measurement Uncertainty.................................................................................................................5 4.4Test Location.....................................................................................................................................5 4.5Test Facility.......................................................................................................................................6 4.6Deviation from Standards..................................................................................................................6 4.7Abnormalities from Standard Conditions...........................................................................................6 5Equipment List.........................................................................................................................................7 6Radio Spectrum Matter Test Results.....................................................................................................8 6.1Electric Field & Magnetic field strength.............................................................................................8 6.1.1E.U.T. Operation...........................................................................................................................8 6.1.2Test Mode Description..................................................................................................................9 6.1.3Test Setup Diagram......................................................................................................................9 6.1.4Measurement Procedure and Data............................................................................................10 7Test Setup Photo....................................................................................................................................11 8EUT Constructional Details (EUT Photos)...........................................................................................12 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005202 EMC-TRF-01 Rev 1.0 Page: 5 of 12 4General Information 4.1Details of E.U.T. Power supply:DC 5V 3A / DC 9V 2A (QC/AFC) Cable(s):Type C input ports with unshielded cables (0.8m) Test Voltage:AC 120 V, 60 Hz powered by DC adapter refer to section 4.2 Operational Frequency: 113.800 kHz to 138.163 kHz Modulation Type:Load Modulation Antenna Type:Loop Antenna Remark: Test were conducted in all load modes (mobile phone, earphone box and Wireless changing resistor load) with different output power and the worst mode (charging for mobile phone) with max output power was reported in each test item. 4.2Description of Support Units DescriptionManufacturerModel No.Serial No. DC Power AdapterCullpower DBS15QC (Input: AC 100-240V, 50/60 Hz; Output: DC5V/3A, DC9V/2A, DC12V/1.5A) / Wireless changing resistor load /5W/7.5W/10W/15W/ EarphoneAppleA2566REF.No.SEA10DO0 Mobile PhoneSAMSUNGGT-I9500RV1D82X8W9X 4.3Measurement …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR220100005201 Page: 1 of 30 FCC ID: PVB-EMJC000 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2201000052AT Applicant:The House of Marley.LLC Address of Applicant:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer:The House of Marley.LLC Address of Manufacturer:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory:1. Dongguan Kailai Electronic Co., Ltd 2. YING TONG (VIETNAM) ELECTRONIC TECHNOLOGY COMPANY LIMITED Address of Factory:1. Building 2, No.6, Baisha Road, Changping, Dongguan City, Guangdong Province, China 2. Plot No. CN02-1-2, Lot No. CN02, Binh Xuyen II Industrial Park, Ba Hien Commune, Binh Xuyen District, Vinh Phuc Province, Vietnam Equipment Under Test (EUT): EUT Name:One Drop (wireless charger) Model No.: EM-JC000 Trade Mark:MARLEY Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2022-01-13 Date of Test: 2022-01-17 to 2022-02-09 Date of Issue: 2022-04-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005201 EMC-TRF-01 Rev 1.0 Page: 2 of 30 Revision Record VersionReport No.DateRemark 01GZCR2201000052012022-04-13Original Authorized for issue by: Kevin Zhang /Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005201 EMC-TRF-01 Rev 1.0 Page: 3 of 30 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass 20dB Bandwidth ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR220100005201 EMC-TRF-01 Rev 1.0 Page: 4 of 30 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................6 4.4Test Location.....................................................................................................................................6 4.5Test Facility.......................................................................................................................................7 4.6Deviation from Standards..................................................................................................................7 4.7Abnormalities from Standard Conditions...........................................................................................7 5Equipment List.........................................................................................................................................8 6Radio Spectrum Technical Requirement.............................................................................................10 6.1Antenna Requirement......................................................................................................................10 6.1.1Test Requirement:.......................................................................................................................10 6.1.2Conclusion..................................................................................................................................10 7Radio Spectrum Matter Test Results...................................................................................................11 7.1Conducted Emissions at AC Mains Power Port (150kHz-30MHz)..................................................11 7.1.1E.U.T. Operation.........................................................................................................................11 7.1.2Test Mode Description................................................................................................................11 7.1.3Test Setup Diagram....................................................................................................................11 7.1.4Measurement Procedure and Data............................................................................................12 7.2Radiated Emissions (30MHz-1GHz)................................................................................................15 7.2.1E.U.T. Operation.…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 1 of 3 Appendix Test Setup Photos for GZCR220100005201 Test Model No.: EM-JC000 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 2 of 3 EUT Constructional Details (EUT Photos) Conducted Emissions at AC Mains Power Port (150kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 3 of 3 Radiated Emissions (30MHz-1GHz) Radiated Emissions (9kHz-30MHz)

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 1 of 2 Appendix Test Setup Photos for GZCR220100005202 Test Model No.: EM-JC000 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 2 of 2 EUT Constructional Details (EUT Photos) Magnetic field strength