PVB-EMJE123LITTLE BIRD

LR Quick Start GuideQuick Start GuideQuick Start GuideQuick Start GuideQuick Start GuideLittle Bird / Bluetooth® Earbuds 1 23 4 5 SELECT “Little Bird” NOTE: Controls are similar for both TWS Mode and Mono Mode 6 PRESS RIGHT TOUCH SENSOR PRESS LEFT TOUCH SENSOR DURING CALLDURING CALL 1x1x GAME / MOVIE MODE L/R3x 2x2x 2s2s 1. Initial Set Up: • Open case • Remove earbuds from case • Remove paper film from bottom of earbuds • Place earbuds in case and allow to charge for 15 minutes • Remove earbuds from case • Earbuds will automatically turn on and one side will rapid blink indicating earbuds are in pairing mode • Add "Little Bird" into your devices Bluetooth settings *Please note earbuds can be manually turned on and off without the case. When Earbuds are on, press and hold for 7 seconds to power off, press and hold 4 seconds to power on. 2. Battery Life: Place or remove an earbud from the case, LED's on bottom of case will blink to indicate case battery life. 3. Powering on and Pairing: • Remove Earbuds from the charging case they will automatically go into pairing mode. • From the Bluetooth menu, select “Little Bird” • After first pairing, earbuds will automatically pair with current device when removed from case 4. Unpairing from Device: To unpair Earbuds from a device press button 5 times. The earbuds will unpair and then be ready to pair to another device. 5. Game/Movie Mode: Tap either earbud 3 times to enter Game/Movie Mode. This mode improves the audio sync from your device and headphones making for a more enjoyable experience. Note: Battery life is decreased in this mode 6. Factory Reset: • Tap 5 times on either earbud. • Earbuds will go back into pairing mode. • Press and hold both Earbud buttons for 5 seconds. • Earbuds will flash 3 times white indicating they have been reset. • Place back in case. ------------------------------- 1. Configuration initiale: • Ouvrez l’étui. • Retirez les écouteurs de l’étui. • Retirez le film en papier du bas des écouteurs. • Placez les écouteurs dans l'étui et chargez-les pendant 15 minutes. • Retirez les écouteurs de l’étui. • Les écouteurs s'allument automatiquement et un côté clignote rapidement, indiquant que les écouteurs sont en mode d'appairage. • Ajoutez «Little Bird» dans les paramètres Bluetooth de votre appareil. *Veuillez noter que les écouteurs peuvent être allumés et éteints manuellement sans l’étui. Une fois les écouteurs allumés, appuyez pendant 7 secondes sur le bouton pour les éteindre, appuyez et maintenez enfoncé 4 secondes pour allumer. 2. Durée de vie des piles: Placez un écouteur dans l’étui ou retirez un écouteur de l’étui. Le témoin lumineux au bas de l’étui clignote pour indiquer la durée de vie des piles de l'étui. 3. Mise sous tension et appairage: • Retirez les écouteurs de l’étui de charge, et ils passeront automatiquement en mode d'appairage. • Dans le menu Bluetooth, sélectionnez «Little Bird». • Après le premier appairage, les écouteurs s'appaireront automatiquement avec l'appareil lorsqu’ils sont retirés de l’étui. 4. Pour désappairer les écouteurs: Appuyez 5 fois sur le bouton pour désappairer les écouteurs d’un appareil. Les écouteurs seront désappairés et prêts à être appairés à un autre appareil. 5. Game/Movie Mode: Tap either earbud 3 times to enter Game/Movie Mode. This mode improves the audio sync from your device and headphones making for a more enjoyable experience. Note: Battery life is decreased in this mode 6. Réinitialisation aux valeurs d’usine: • Tapez 5 fois sur l’un des écouteurs. • Les écouteurs repassent en mode d'appairage. • Appuyez pendant 5 secondes sur les deux boutons de l’écouteur. • Les écouteurs clignotent 3 fois en blanc pour indiquer qu’ils ont été réinitialisés. • Replacez-les dans l’étui. ------------------------------- 1. Configuración inicial: • Abra el estuche • Saque los audífonos del estuche • Retire el papel transparente de la parte inferior de los audífonos • Coloque los audífonos en el estuche y póngalos a cargar durante 15 minutos • Saque los audífonos del estuche • Los audífonos se encenderán automáticamente y un lado parpadeará rápidamente, indicando que se encuentran en modo de vinculación • Agregue "Little Bird" en la configuración Bluetooth de sus dispositivos. *Observe que los audífonos pueden encenderse y apagarse manualmente sin el estuche. Cuando los audífonos estén encendidos, manténgalos presionados durante 7 segundos para apagarlos, o manténgalos presionados durante 4 segundos para encenderlos. 2. Duración de la batería: Coloque o retire un audífono del estuche, los LED de la parte inferior del estuche parpadearán para indicar la duración de la batería del estuche. 3. Encendido y vinculación: • Saque los audífonos del estuche de carga y pasarán automáticamente al modo de vinculación. • Seleccione "Little Bird" en el menú Bluetooth • Después de la primera vinculación, los audífonos se vincularán automáticamente con el dispositivo activo cuando se saquen del estuche. 4. Desvinculación del dispositivo: Para desvincular los audífonos de un dispositivo, presione el botón 5 veces. Los audífonos se desvincularán y después estarán listos para vincularse con otro dispositivo. 5. Game/Movie Mode: Tap either earbud 3 times to enter Game/Movie Mode. This mode improves the audio sync from your device and headphones making for a more enjoyable experience. Note: Battery life is decreased in this mode 6. Restablecimiento de fábrica: • Toque 5 veces cualquiera de los auriculares. • Los audífonos volverán al modo de vinculación • Mantenga presionados ambos botones de los auriculares durante 5 segundos. • Los audífonos parpadearán 3 veces con luz blanca indicando que se han restablecido. • Colóquelos de nuevo en el estuche. ------------------------------- 1. Impostazione iniziale: • Aprire la scatola • Estrarre gli auricolari dalla scatola • Rimuovere la pellicola di carta dal fondo degli auricolari • Collocare gli auricolari nella scatola e lasciarli caricare per 15 minuti • Est…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name The House of Marley. LLC Address 3000 Pontiac Trail, Commerce Township, Michigan, 48390, United States Grantee Code PVB FCC ID PVB-EMJE123 Authorized Contact Name Cody Brooner Contact Email [email protected] Contact Phone 8057047670 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List The House of Marley.LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The House of Marley.LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023/7/3 Print Name: Cody Brooner Title: Head of Product *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

1.4 SGS_FCC_U.S. agent Letter_DO-EDIT UNITED STATES DESIGNATED AGENT LETTER Date: 2023/7/3 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: The House of Marley. LLC Company Name: The House of Marley. LLC Grantee Code: PVB FRN: 0022026009 FRN: 0022026009 Contact Name: Cody Brooner Contact Name: Cody Brooner Address: 3000 Pontiac Trail Address: 3000 Pontiac Trail City/Province/Zip : Commerce Township, Michigan, 48390 City/Province/Zip : Commerce Township, Michigan, 48390 Country United States Country United States Telephone: 8057047670 Telephone: 8057047670 Fax: 2488633100 Fax: 2488633100 Email: [email protected] m Email: [email protected] m Applicable Equipment: FCC ID: PVB-EMJE123 ATTN: Director of Certification: We, The House of Marley. LLC and The House of Marley. LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, The House of Marley. LLC and The House of Marley. LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name: Cody Brooner Name: Cody Brooner Title: Head of Product Title: Head of Product Signature: Signature:

The House of Marley.LLC Authority letter FCC Date: 2023/7/3 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PVB-EMJE123 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Cody Brooner Title: Head of Product Signature: On behalf of Company: The House of Marley.LLC

The House of Marley.LLC Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: The House of Marley.LLC 3000 Pontiac Trail , Commerce Township, Michigan, 48390, United States Regarding: Confidentiality Request regarding application for FCC ID: PVB-EMJE123 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Cody Brooner Title: Head of Product Signature: On behalf of Company: The House of Marley.LLC

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 7 Appendix External Photos for GZCR2306000649AT Test Model No.: EM-JE123 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 7 EUT Constructional Details (EUT Photos) Right earbuds SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 5 of 7 Left earbuds SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 7 of 7

25.5mm 45.16 56.58 8.37MM 15.6MM 19.35mm WWYY WWYY Made In China

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 5 Appendix Internal Photos for GZCR2306000649AT Test Model No.: EM-JE123 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 5 EUT Constructional Details (EUT Photos) For left earbud. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 5 For right earbud. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 1 of 8 FCC ID: PVB-EMJE123 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2306000649AT Applicant:The House of Marley. LLC Address of Applicant:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer:The House of Marley. LLC Address of Manufacturer:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory:GuangZhou U&I Technology Company Limited Address of Factory:Buliding 1, Mingsheng Industrial Park, South 2nd Road, Shibei Avenue, Dashi Town, Panyu District, Guangzhou, Guangdong, China Equipment Under Test (EUT): EUT Name:LITTLE BIRD Model No.: EM-JE123 Trade Mark:Marley Standard(s) : KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2023-06-29 Date of Evaluation: 2023-07-17 Date of Issue: 2023-08-23 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 2 of 8 Revision Record VersionReport No.DateRemark 01GZCR2306000649032023-08-23Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 3 of 8 2Evaluation Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult RF Exposure KDB447498 D01 General RF Exposure Guidance v06 KDB447498 D01 General RF Exposure Guidance v06 KDB447498 D01 General RF Exposure Guidance v06 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 4 of 8 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1RF Exposure Evaluation....................................................................................................................7 5.1.1Limit & Test Method......................................................................................................................7 5.1.2Conclusion....................................................................................................................................7 6EUT Constructional Details (EUT Photos).............................................................................................8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 5 of 8 4General Information 4.1Details of E.U.T. Power supply:DC 3.7V powered by built-in battery as below for normal working: ST 500909 Rated: DC 3.7V, 35mAh. DC 5 V for charging. Cable(s):For earphone: DC input ports. Type-C charging port. Operation Frequency:2402MHz to 2480MHz Modulation Type:GFSK, pi/4DQPSK, 8DPSK Number of Channels:79 Channel Spacing:1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type:Chip Antenna Antenna Gain:3.4 dBi Antenna Number:1 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR230600064903 Page: 6 of 8 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ● ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC S…

Text truncated - open the document above for the full version.

SymbolsLWTA Dimensions1.60±0.200.80±0.200.80±0.200.30±0.10 NumberTerminal Name ① INPUT ② NC Dimensions（Unit：mm） L w ①② T ( Side View ) ( Bottom View ) ( Top View ) A Features 1.Surface Mounted Devices with a small dimension of 1.6 x 0.8 x 0.8 mm meet future miniaturization trend. 2,Embedded and LTCC (low temperature co-fired ceramic) technology is able to integrate with system design as well as beatifying the housing of final product. 3.High stability and low tolerance. Applications 1.Bluetooth 2.Wireless LAN 3.ISM band 2.4GHz wireless applications www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 1 P/N: SURL160808 SRF08 2nd Floor, Building B25, Hezhou Hengfeng Industrial City, Xixiang, Bao'an District, Shenzhen City, Guangdong Province TEL:0755-82790675 FAX:0755-82809726 Evaluation Board and Matching Circuits www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 2 P/N: SURL160808 SRF08 Electrical Characteristics Characteristic curve www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 3 FeatureSpecification 1 Central frequency2445MHz 2 Bandwidth>100MHz 3 Peak gain>3dBi 4 VSWR<2 5 PolarizationLinear 6 Azimuth beamwidthOmnidirectional 7 Impedance50 Ω P/N: SURL160808 SRF08 Radiation Pattern coordinates： Y-Z Plane X-Z Plane www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 4 P/N: SURL160808 SRF08 3D Radiation Pattern www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 5 X-Y Plane Frequency 2400MHz2450MHz2500MHz Avg. gain-1.14-0.85-1.30 Peak gain23.42.5 Efficiency77%82%78% P/N: SURL160808 SRF08 Moisture Proof Temperature：40±2°C Humidity：90~95%RH Duration：500h Recovery conditions：Room temperature Recovery Time：24h (Class1) or 48h (Class2) Sol derabi li ty At least 95% of the terminal electrode is covered by new solder.Preheating conditions:80 to 120°C; 10~30s. SolderTe m p e r at u r e :2 3 5 ± 5°C Duration:2 ±0.5s , SolderTempe r atu re:24 5±5°C Du rat ion:2±0.5s Optimum Solder Amount for Reflow Soldering www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 6 Dependability Test Test Temperature: Operating Temperature Temperature Relative Humidity 25°C±3°C -25°C~+85°C 5~40°C 20~70% Too much solderCracks tend to occur due to large stress. Not enough solder Weak holding forcemay cause bad connection between the capacitor and PCB. Recommended Soldering amounts The optimal solder fillet amounts for re-flow soldering 天线厚度 以下 The optimal solder fillet amounts for wave soldering P/N: SURL160808 SRF08 Temperature Cycle Test 10±1S Applied Force: 5NDuration: 10±1S Preheating conditions: up-category temperature, 1h Recovery time: 24±1h Initial Measurement Cycling Times: 5 times, 1 cycle, 4 steps: www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 7 Resistanceto SolderingHeat Preheating80 to 120°C; 10~30s.SolderTemperature:235±5°C Duration:2±0.5s，SolderTemperature:245±5°C Duration:2±0.5s，Preheating100to200°C;10±2min. Solder Temperature: 265±5°C Duration: 10±1s Clean the capacitor with solvent and examine it with a 10X(min.) microscope. Recovery Time: 24±2h Recovery condition: Room temperature Resistance to Flexure of Substrate Test Board: Al 2 O 3 or PCBWarp: 1mm Speed: 0.5mm/sec. Unit: mm The measurement should be made with the board in the bending position. P/N: SURL160808 SRF08 www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 8 While in preheating,please keep the temperature difference between soldering temperature and surface temperature of chips as: T≤150°C. P/N: SURL160808 SRF08 Dimensions of paper taping for 0603types Reel（4000 pcs/Reel） Storage Period The guaranteed period for solderability is 6 months(Under deliver package condition).Temperature5~40°C /Relative Humidity20~70% www.surbaner.com.cn SBR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SBR Communication Technology. . Page 9 P/N: SURL160808 SRF08 Unit：mm

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230600064902 Page: 1 of 149 FCC ID: PVB-EMJE123 Ricky Liu Manager TEST REPORT Application No.: GZCR2306000649AT Applicant: The House of Marley. LLC Address of Applicant: 3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer: The House of Marley. LLC Address of Manufacturer: 3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory: GuangZhou U&I Technology Company Limited Address of Factory: Buliding 1, Mingsheng Industrial Park, South 2nd Road, Shibei Avenue, Dashi Town, Panyu District, Guangzhou, Guangdong, China Equipment Under Test (EUT): EUT Name: LITTLE BIRD Model No.: EM-JE123 Trade Mark: Marley Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-06-29 Date of Test: 2023-07-07 to 2023-07-17 Date of Issue: 2023-08-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230600064902 Page: 2 of 149 Revision Record Version Report No. Date Remark 01 GZCR230600064902 2023-08-23 Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR230600064902 Page: 3 of 149 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section…

Text truncated - open the document above for the full version.