PVB-EMJE132Champion 2

ATTENTION: PLEASE READ THE QUICK START GUIDE BEFORE USE ATTENTION : PRIÈRE DE LIRE LE GUIDE DE DÉMARRAGE RAPIDE AVANT UTILISATION ATENCIÓN : LEA LA GUÍA DE INICIO RÁPIDO ANTES DE USARLO BEACHTUNG : VOR DEM GEBRAUCH BITTE DIE SCHNELLSTARTANLEITUNG LESEN ATTENZIONE : LEGGERE LA GUIDA DI AVVIAMENTO RAPIDO PRIMA DEL USO OPGELET : VOOR HET GEBRUIK DE SNELSTARTGIDS LEZEN PERHATIAN: HARAP BACA PANDUAN MULAI CEPAT SEBELUM MENGGUNAKAN 注 意： ご 使 用 前 にクイックスタートガ イドを 必 ず お 読 みください 。 提示：使用前請閱讀快捷使用說明 주의 : 사용 전에 빠른 시작 가이드를 읽어 주십시오. CHAMPION 2 QUICK START GUIDE Champion 2 / Bluetooth® Earbuds RED ROJO ROUGE ROT ROSSO RØD PIROS CZERWONY КРАСНЫЙ ROOD PUNAINEN RÖDzvz ΚΌΚΚΙΝΟΣ VERMELHO KIRMIZI 红 赤 빨간 = 25% = 50% = 75% = 100% DOWNLOAD THE APP Télécharger l’application / Descargar la app / Scaricare l’App / App herunterladen / Download de app (applicatie) / アプリをダウンロ ード / 下載APP / 앱 다운로드 / Mengunduh Aplikasi Quick Start GuideChampion 2 / Bluetooth® Earbuds 1 23 4 5 SELECT “Champion 2” 6 (PRESS)(PRESS) DURING CALLDURING CALL LR 1s 1s1s 2s 2s 1s 3x3x 1x1x 2x 2x 8 secL/R 1s 1s1s 1s 2s 2s2s 2s RESET PAIRING 2s4s 5x ONOFF 2ND PAIRING Quick Start GuideQuick Start GuideQuick Start Guide DURING CALL 1s 2s MONO MODE LR (PRESS) 1x 1x2x 1x 3x 1s 2s 1. Initial Set Up: • Open the case. • Remove Earbuds and remove paper film from the bottom. • Place Earbuds in case. • Earbuds will turn on and LEDs will flash white. *Please note that Earbuds can be turned on by holding down the button for 2 seconds, or turned off by holding down the button for 5 seconds. 2. Battery Life: Tap case to check battery level. LEDs on case will indicate status. 3. Powering on and Pairing: • Remove Earbuds from the charging case they will automatically go into pairing mode. • From the Bluetooth menu, select “Champion 2” 4. Quick Charge: Place the Earbuds in the Case for 15 minutes to receive 2 hours of playback. 5. Unpairing from Device: To unpair Earbuds from a device press button 5 times. The earbuds will unpair and then be ready to pair to another device. 6. Factory Reset: • Wait 5 seconds after earbuds turn off. • Press and hold both Earbud buttons for 8 seconds. • Earbuds will flash 3 times white indicating they have been reset. • Place back in case. ------------------------------- 1. Préparation initiale: • Ouvrez l’étui. • Retirez les écouteurs et ôtez les autocollants. • Placez les écouteurs dans l’étui. • Les écouteurs se mettent en marche et les voyants clignotent en blanc. *Veuillez noter que les écouteurs peuvent être activés en appuyant sur le bouton pendant 2 secondes, et ils peuvent être désactivés en appuyant sur le bouton pendant 5 secondes. 2. Durée de vie des piles: Tapez sur l’étui pour voir l’état des piles. Les voyants sur l’étui indiquent l’état des piles 3. Mise sous tension et appairage: • Retirez les écouteurs de l’étui de charge. Ils passent automatiquement en mode d’appairage. • Dans le menu Bluetooth, sélectionnez «Champion 2» 4. Charge rapide: Placez les écouteurs dans Quick Start GuideQuick Start GuideQuick Start Guide l’étui pendant 15 minutes pour une durée d’écoute de 2 heures. 5. Pour désappairer les écouteurs: Appuyez 5 fois sur le bouton pour désappairer les écouteurs d’un appareil. Les écouteurs seront désappairés et prêts à être appairés à un autre appareil. 6. Réinitialisation aux valeurs d’usine: • Éteignez les écouteurs en appuyant sur le bouton pendant 5 secondes. • Attendez 5 secondes après l’extinction des écouteurs. • Appuyez pendant 8 secondes sur les boutons des deux écouteurs. • Les écouteurs clignotent 3 fois en blanc pour indiquer qu’ils ont été réinitialisés. • Replacez-les dans l’étui. ------------------------------- 1. Configuración inicial: • Abra el estuche. • Saque los audífonos y retire la película de papel del fondo. • Coloque los audífonos en el estuche. • Los audífonos se encenderán y los LED parpadearán de color blanco. *Por favor, tenga en cuenta que los audífonos se pueden encender manteniendo el botón oprimido durante 2 segundos, o apagarse manteniendo el botón oprimido durante 5 segundos. 2. Vida de la batería: Toque el estuche para revisar el nivel de la batería. Los LED en el estuche indicarán su estado. 3. Encendido y coplamiento: • Saque los audífonos del estuche de carga. Éstos se pondrán automáticamente en modo de acoplamiento. • En el menú Bluetooth, seleccione “Champion 2” 4. Carga rápida: Coloque los audífonos en el Estuche durante 15 minutos para obtener 2 horas de reproducción. 5. Desacoplar del dispositivo: Para desacoplar los audífonos de un dispositivo, oprima el botón 5 veces.Los audífonos se desacoplarán y después estarán listos para acoplarse con otro dispositivo. 6. Reinicio de fábrica: • Encienda los audífonos manteniendo oprimido el botón durante 5 segundos. • Espere 5 segundos después de que se apaguen los audífonos. • Oprima y sostenga así los botones de ambos audífonos durante 8 segundos. • Los audífonos destellarán 3 veces en blanco indicando que se han restablecido. • Colóquelos de nuevo en el estuche. ------------------------------- 1. Predisposizione iniziale: • Aprire la scatola. • Rimuovere gli auricolari e il film di carta dal fondo. • Collocare gli auricolari nella scatola. • Gli auricolari si accendono e i LED lampeggiano bianco. *Si noti che gli auricolari possono essere accesi tenendo premuto il pulsante per 2 secondi o spenti tenendo premuto il pulsante per 5 secondi. 2. Durata della batteria: Toccare la scatola per controllare il livello della batteria. Le spie sulla scatola indicano il livello. 3. Accensione e accoppiamento: • Rimuovere gli auricolari dalla scatola di carica, passeranno automaticamente in modalità accoppiamento. • Dal menu Bluetooth, selezionare “Champion 2” 4. Ricarica rapida: Collocare gli auricolari nella scatola per 15 minuti per ricevere 2 ore di riproduzione. 5. Disaccoppiamento dal dispositivo: Per disaccoppiare gli auricolari da un dispositivo premere il pulsante 5 volte. Gli auricolari si disaccoppiano e sono pronti per l’acc…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name The House of Marley.LLC Address 3000 Pontiac Trail Commerce Township, Michigan, 48390, United States Grantee Code PVB FCC ID PVB-EMJE132 Authorized Contact Name Cody Brooner Contact Email [email protected] Contact Phone 8057047670 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List The House of Marley.LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The House of Marley.LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 4/11/2023 Print Name: Cody Brooner Title: Head of Product *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 4/11/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: The House of Marley.LLC Company Name: The House of Marley.LLC Grantee Code: PVB FRN: 0022026009 Contact Name: Cody Brooner Contact Name: Cody Brooner Address: 3000 Pontiac Trail Address: 3000 Pontiac Trail City/Province/Zip: Commerce Township/Michigan/48390 City/Province/Zip: Commerce Township/Michigan/48390 Telephone: 8057047670 Telephone: 8057047670 Fax: 2488633100 Fax: 2488633100 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: PVB-EMJE132 ATTN: Director of Certification: We, The House of Marley.LLC and The House of Marley.LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, The House of Marley.LLC and The House of Marley.LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant The House of Marley.LLC U.S. designated agent The House of Marley.LLC Name (Printed): Cody Brooner Name (Printed): Cody Brooner Title: Head of Product Title: Head of Product Signature: Signature:

The House of Marley.LLC Authority letter FCC Date: 4/11/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PVB-EMJE132 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with The House of Marley.LLC. This authorization is valid until further written notice from the applicant. Name (Printed): Cody Brooner Title: Head of Product Signature: On behalf of Company: The House of Marley.LLC

The House of Marley.LLC Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: The House of Marley.LLC 3000 Pontiac Trail Commerce Township, Michigan, 48390, United States Regarding: Confidentiality Request regarding application for FCC ID: PVB-EMJE132 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Cody Brooner Title: Head of Product Signature: On behalf of Company: The House of Marley.LLC

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 7 Appendix External Photos for Earbuds of GZCR2208001056AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 7 EUT Constructional Details (EUT Photos) Left earbud SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 5 of 7 Right earbud SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 7 of 7

EARBUDS RATING LABEL IPx5 IPx5 PVB-EMJE132 PVB-EMJE132 10613A-EMJE132 10613A-EMJE132 Laser engrave on body

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 7 Appendix Internal Photos for Earbuds of GZCR2208001056AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 7 EUT Constructional Details (EUT Photos) Left earbud BT ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 7 Right earbud BT ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 7

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 1 of 9 FCC ID: PVB-EMJE132 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2208001056AT Applicant:The House of Marley. LLC Address of Applicant:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer:The House of Marley. LLC Address of Manufacturer:3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory:1.Dongguan Kailai Electronic Co., Ltd. 2. YING TONG (VIETNAM) ELECTRONIC TECHNOLOGY COMPANY LIMITED Address of Factory:1.Building 2, No.6, Baisha Road, Changping, Dongguan City, Guangdong Province, China 2.Plot No. CN02-1-2, Lot No. CN02, Binh Xuyen II Industrial Park, Ba Hien Commune, Binh Xuyen District, Vinh Phuc Province, Vietnam Equipment Under Test (EUT): EUT Name:Champion 2 Model No.: EM-JE132 Trade Mark:MARLEY Standard(s) : KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2022-08-25 Date of Evaluation: 2022-09-06 to 2022-09-26 2023-04-20 Date of Issue: 2023-05-26 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 2 of 9 Revision Record VersionReport No.DateRemark 01GZCR2208001056052023-05-26Original Authorized for issue by: Kevin Zhang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 3 of 9 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 KDB447498D01 General RF Exposure Guidance v06 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 4 of 9 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1RF Exposure Evaluation....................................................................................................................7 5.1.1Limit & Test Method......................................................................................................................7 5.1.2Conclusion....................................................................................................................................7 6EUT Constructional Details (EUT Photos).............................................................................................9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 5 of 9 4General Information 4.1Details of E.U.T. Power supply:Powered by built-in battery as below: Model: M1254S2 Rated: DC 3.7 V, 0.222Wh DC 5 V for charging Cable(s):DC input ports Antenna Type:FPC Antenna Antenna Gain:-2.18 dBi Antenna Number:1 Remark:The two modes of BT can not transmit at the same time For BT Classic Operation Frequency:2402MHz to 2480MHz Bluetooth Version:V5.2 Dual mode Modulation Type:GFSK, pi/4DQPSK, 8DPSK Number of Channels:79 Channel Spacing:1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) For BT BLE Bluetooth Version:V5.2 Dual mode Modulation Type:GFSK Number of Channels:40 Channel Spacing:2MHz 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR220800105605 Page: 6 of 9 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulato…

Text truncated - open the document above for the full version.

Customer Name: Kailai Product Name: EPA355 BT antenna Specifications：EPA355 FPC antennaR L Productnumber:23-0012110-0 Customer code： 23-0012110-0 Complies with environmental standards： RoHS/WEEE/PAHS/RAECH SVHC/POP-SCCP/AZ0/Prop 65 supplierCustomer Creation DateCreation Date Approved DateApproved Date Date of approval Date of approval Manufacturer：Shenzhen Kaipushen Communication Technology Co., Ltd Supplier address：2nd Floor, Building 1, Yulong Building, Longcheng Industrial Zone, No.440, Longguan Avenue, Longhua District, Shenzhen Tel：0755-29351613 Fax:0755-29351510 承 认 书 SPECIFICATION 此文件中所包含的一切信息版权归深圳市凯普深 通讯科技有限公司所有，在未得到深圳市凯普深通讯科技有限公司的书面许可下，请勿散播给任何第三方。 Contents 1、 Cover 2、 Contents 3、 ICD Drawing(BT aerial) 4、 Electrical and mechanical performance description 5、 Full dimensional measurement report 6、 QC engineering drawing 7、 inspection specification 8、 Rohs means 9、 Salt spray test report 10、 High-low temperature test 11、Package 3.ICD Drawing 5.1 electrical properties 5.1-1 specification BT antenna resonates at 2400m-2480m 。 5.1-2 Matching circuit of antenna . The matching circuit is as follows: 5.2 Standing wave ratio (SWR) test 5.2-1 Test settings The standing wave ratio (SWR) test device is connected in turn to：E5071B Network analyzer→ 50 ohm coaxial Cable→150 mm long copper tube→Test the fixture。 Test the treatment of fixture：Draw out the SMA-J connector from the PCB antenna at the 50 ohm test point with a hard cableConnect with copper tube with choke ring and connect other devices in turn。 The following table shows the standing wave ratio of the edge frequency points of the working The following table, shown as：Standing Wave Ratio of Edge Frequency Points in the Operating Frequency Band of BT Antennas Fre(MHZ) 240224402480 LSRW2.11.32.6 The following table, shown as：Standing Wave Ratio of Edge Frequency Points in the Operating Frequency Band of BT Antennas Fre(MHZ) 240224402480 RSRW2.21.11.9 The above diagram shows the standing wave ratio curve 6.2-4 Whole machine active test data ： Main antenna test data： Passive Efficiency and Gain of Antennas environmental treatment ： Full dimensional measurement report Customer Kailai part name BT aerialQtyMaterial Electrolytic copper Supplier KaipushenMeasure tools Quadratic Measure unitmmMeasure date 2023/3/8 NO. Size （DIMENSION） U p p e r + TOL.- TOL. L o w e r Act mea 1 Act mea 2 Act mea 3 Act mea 4 Act mea 5 Act mea 6 Act mea 7 UPPER≦100%LOWER≦100% 1 13.79 13.89 0.10 0.10 24.9513.81 13.78 13.77 13.81 13.82 13.82 13.77 30%20% 2 10.72 10.82 0.10 0.10 10.6210.71 10.70 10.70 10.71 10.73 10.73 10.73 10%20% 5 13.79 13.89 0.10 0.10 24.9513.82 13.82 13.77 13.81 13.82 13.81 13.78 30%20% 6 10.72 10.82 0.10 0.10 10.6210.70 10.71 10.73 10.73 10.70 10.70 10.74 20%20% 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Table：ChenjianAudit：Wuxingtuo Date：April 6th, 2023 深圳市凯普深通讯科技有限公司 QCschedule drawing file numberKPS--QPA-QA004 Enactment Date Shenzhen cape deep communication technology co., LTD file versionA/01Pagepage 1 technological process Control focus management responsibility methodInspection methodcorrective action Order Number Main Proces s project name aControl ProjectRegulatory standards person liable Normal sampling number person in charge Inspectio n method Examines the tool Record typeSolution begin 1 Receivi ng quantity/product name/specifications 《Engineering BOM》 《Material receiving operation instruction》 Material clerk 《Electronic account》 Contact the supplier and issue 《 returning note》 2 Incomin g inspect ion specifications/model/ pack 《Engineering BOM》 《Sampling inspection plan 》 《IQC incoming material inspection instruction》 IQC MA=0.25 MI=0.65 IQC 1.visual 2.Machine test 3.sample Two dimensional vernier caliper 《IQC incoming inspection record 》 Inspection: OK, stamped with pass seal，The inspection ng shall be labeled as nonconforming product and issued at the same time《8D Report Problem Solving Report 》，Notify the supplier of return and improve 。 3 materia l quantity/product name/specifications 《 production instruction》 《Material receiving operation instruction》 Material clerk 《Material requisition and distribution registration form 4pack pack quantity/indicate 《Finished product packaging operation instruction 》 packager 5 Deliver y inspect ion product appearance bad record Dimensional test Bad sign Good product packaging ROHS compliance 《Engineering BOM》 《Sampling inspection plan 》 《OQCFinal inspection operation instruction 》 OQC MA=0.25 MI=0.65 OQC 1.visual 2.Machine test 3. sample Two dimensiona l vernier caliper 《OQC finished product inspection record 》 If the number of times of the same type of the same type missing in the daily inspection is greate，OQC issues the 8D report problem solving report to the production manager for analysis and improve 6 deliver y product namespecification quantity delivery note 《Finished product shipping operation instruction 》 Material clerk 《Electronic account》 finish charac ter Revision dateRevised content Revised ; Revised Acknowl edged by Fiction auditin g approv al ① ② datedate date ③ Shenzhen Kaipushen Communication Technology Co., Ltd file NO Enactment Date FPC antenna inspection specification Page editionA0 1．Purpose and purpose： rigorous testing ，Control the use of defective products and ensure product quality requirements。 2．applicable scope：FPC aerial。 3．content itemcontenttool Inspection standards and technical requirements Defect Description stratum packin g characteristicvisual The outer package is clearlylabeled， Indicate，product name、 specifications、 quantity、date。 The identification is not clear and cannot be identified。 MIN Mattervisual Uniform packaging， Clean and tidy， unabroken ，No impact on handling 、Storage，No wrong installation 、mixed 、Less clothes。 Inconsistent packaging，Dirty、 damp、damaged.，Affect handling 、Storage。 MIN appeara nce surfacevisual FPC is not damaged、 Copper Exposured、 dehiscence、chromatic aberration、 Yijiao,Gold finger is free of oxidation and brittle crack。 FPC is …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR220800105606 Page: 1 of 105 FCC ID: PVB-EMJE132 Ricky Liu Manager TEST REPORT Application No.: GZCR2208001056AT Applicant: The House of Marley. LLC Address of Applicant: 3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Manufacturer: The House of Marley. LLC Address of Manufacturer: 3000 Pontiac Trail, Commerce Township, Michigan 48390 United States Factory: 1.Dongguan Kailai Electronic Co., Ltd. 2. YING TONG (VIETNAM) ELECTRONIC TECHNOLOGY COMPANY LIMITED Address of Factory: 1.Building 2, No.6, Baisha Road, Changping, Dongguan City, Guangdong Province, China 2.Plot No. CN02-1-2, Lot No. CN02, Binh Xuyen II Industrial Park, Ba Hien Commune, Binh Xuyen District, Vinh Phuc Province, Vietnam Equipment Under Test (EUT): EUT Name: Champion 2 Model No.: EM-JE132 Trade Mark: MARLEY Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-08-25 Date of Test: 2023-04-17 to 2023-04-19 Date of Issue: 2023-05-26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR220800105606 Page: 2 of 105 Revision Record Version Report No. Date Remark 01 GZCR220800105606 2023-05-26 Original Authorized for issue by: Kevin Zhang/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR220800105606 Page: 3 of 105 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spu…

Text truncated - open the document above for the full version.