PVB-GETTOGETHERBLUETOOTH SPEAKER (GET TOGETHER)

1 Get Together Portable Bluetooth ® Audio System 1 2 Easy To UseWhen the system is powered and a device is connected, you are ready to enjoy your Get Together. 1. Press the power button to turn Get Together on. Press the power button again to turn Get Together off. 2. Increase or decrease the volume on Get Together by pressing or holding the – and + buttons until the desired volume is reached. You can also adjust the system volume using the controls on your music source. 3. Quickly press the while music is playing to pause and resume playback directly from Get Together. Important Safety Information1. Follow and keep these instructions.2. Heed all warnings.3. Do not use this apparatus near water.4. Clean only with a dry cloth.5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) tha t produce heat. 7. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where the y exit from the apparatus. 8. Only use attachments/accessories specified by the manufacturer.9. Unplug this apparatus during lightning storms or when unused for long periods of time.10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, su ch as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.WEEE EXPLANATION This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. BATTERY DIRECTIVE This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points. Get TogetherPortable Bluetooth ® Audio System Greetings and Welcome to the House of Marley We are honored you have selected Get Together to become part of your music experience. Get Together is a portable stereo sound system which works with Bluetooth ® devices connected wirelessly and hundreds of other devices via the auxiliary input. The system uses two high-output, long- throw 3.5” (89mm) woofers in a ported enclosure, two 1” (25mm) tweeters and a powerful amplifier. The system uses custom-milled bamboo front and rear sections and is wrapped in REWIND™ fabric composed of reclaimed hemp, organic cotton, and recycled plastic bottles (RPET). Everything You Need to JamThe Get Together comes with the following items: Sound System AC Power Supply(100-240 VAC) 3.5mm Stereo Mini Cable Powering Your Get TogetherGet Together includes a built-in rechargeable battery that is charged by the included power supply. The LED by the power port will glow RED when the system is charging and turn off once the battery is full.Using a Wall Outlet1. Insert the AC power supply cord into the Get Together. 2. Insert wall plug into an appropriate wall outlet.Connecting Your Music Device(s)Pairing Mode (Flashing Blue LED)Get Together automatically goes into reconnect mode for 5 seconds as soon as you turn it on (flashing BLUE led). It then switches to auxiliary mode (RED led). You can pair a new device to Get Together by holding the for 3 seconds. Note: Holding the for 3 seconds will kick off the device currently connected to Get Together and go into Pairing Mode. Connected Mode (Solid Blue LED)Use your Bluetooth-enabled device to pair to Get Together. Get Together does not require a pairing password. Once paired, the LED will glow solid blue.Note: Get Together will automatically pair with the last device connected to it when turned ON (when possible).Connecting other devicesThe auxiliary input on the back of Get Together allows you to connect other audio devices to the system. Simply connect your device to the AUX input on the Get Together using the 3.5mm stereo mini cable (included). (1) (2) (1) (2) (3) EN 3 4 Get TogetherSistema de audio portátil con tecnología Bluetooth ® Saludos y bienvenido a The House of MarleyNos enorgullece que haya elegido a Get Together como parte de su experiencia con la música. El Get Together es un sistema de sonido estéreo portátil que se conecta a dispositivos con tecnología Bluetooth ® de manera inalámbrica y con cientos de otros dispositivos por medio de la entrada auxiliar.El sistema cuenta con dos parlantes de alta salida y largo alcance de 89 mm (3,5 pulg.) en una caja adaptada, dos altavoces para agudos de 25 mm (1 pulg.) y un potente amplificador. El sistema utiliza las secciones delantera y trasera de bambú molido según especificaciones y está envuelto en una tela REWIND™ compuesta por cáñamo recuperado, algodón orgánico y botellas plásticas recicladas (RPET). Todo lo que necesita para disfrutar de la músicaEl Get Together se suministra con los siguientes elementos: ES Fácil de usarUna vez que el sistema esté encendido y haya un dispositivo conectado, usted estará listo para disfrutar de su Get Together. 1. Presione el botón de encendido para encender el Get Together. Presione el botón de encendido nuevamente para apagar el Get Together. 2. Suba o baje el volumen del Get Together presionando o manteniendo presionados los botones – y + hasta alcanzar el volumen deseado. También puede ajustar el volumen del sistema usando los controles de su fuente de música…

Text truncated - open the document above for the full version.

The House of Marley. LLC Date: Sep 08, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: PVB-GETTOGETHER Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics SCH.pdf Block Diagram BlockDiagram.pdf Operational Description CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, 3000 Pontiac Trail Commerce Township , MI 48390 USA ............................................................... Signature Vladislav Grodzinskiy / Manager ............................................................... Typed name and Title

Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: Sep 09, 2013 SUBJECT: FCC Application for (FCC ID: PVB-GETTOGETHER ) To Whom It May Concern: I, the undersigned, hereby attest to the fact that I will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. 3. Pt 2.1077 contains the list of information that must be included in the Declaration of Conformity, which must be supplied with each product sold. The DoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(c)(2), the responsible party is either the Manufacturer or if the product is imported the Importer . Regards, Signature: Vladislav Grodzinskiy/ Manage: Applicant: The House of Marley. LLC Address: 3000 Pontiac Trail Commerce Township , MI 48390 USA

The House of Marley. LLC. FCC ID: PVB-GETTOGETHER POWER OF ATTORNEY Date: Sep 09, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on August 27, 2014. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, The House of Marley. LLC., are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, ................................................................................. Signature Vladislav Grodzinskiy / Manager ................................................................................. Typed name and Title

Reference No.: WTD13S0706106E Page 80 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19 Photographs - Constructional Details 19.1 EUT – External View Reference No.: WTD13S0706106E Page 81 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0706106E Page 82 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0706106E Page 83 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19.2 Adapter View Reference No.: WTD13S0706106E Page 84 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Location for model: EM-JA006-MI The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. The House of Marley. LLC Model No.: EM-JA006-MI FCC ID: PVB-GETTOGETHER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any nterference received, including interference that may cause undesired operation.

FCC Label FCC Label Sample for model: EM-JA006-MI FCC ID: PVB-GETTOGETHER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Reference No.: WTD13S0706106E Page 85 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19.3 EUT – Internal View Reference No.: WTD13S0706106E Page 86 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0706106E Page 87 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn RF module Reference No.: WTD13S0706106E Page 88 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19.4 EUT – RF Module View Reference No.: WTD13S0706106E Page 89 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn ==End of test report==

Reference No.: WTD13S0706106E Page 1 of 89 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID : PVB-GETTOGETHER Applicant : The House of Marley. LLC Address : 3000 Pontiac Trail Commerce Township , MI 48390 USA Manufacturer : Shenzhen 3nod Digital Technology Co., Ltd. Address : Building D Park 8# Road Tangxiayong Village, Industrial Zone Songgang Town, Baoan District, Shenzhen City, China Equipment Under Test (EUT) : Product Name : Bluetooth Speaker (Get together) Model No. : EM-JA006-MI Standards : FCC Part15.247:2012 Date of Test : July 30~August 06, 2013 Date of Issue : August 22, 2013 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Maikou Zhang / Project Engineer Philo Zhong / Manager Reference No.: WTD13S0706106E Page 2 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Spurious Radiated Emissions 15.205(a) 15.209 15.247(d) PASS Band edge Emissions 15.247(d) PASS Spurious RF Conducted Emissions from out of band 15.247(d) PASS Duty Cycle 15.35 PASS Conducted Emissions 15.207 PASS 20dB Bandwidth 15.215c 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separation 15.247(a)(1) PASS Number of Hopping Frequency 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTD13S0706106E Page 3 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 TEST SUMMARY................................................................................................................................................... 2 3 CONTENTS............................................................................................................................................................. 3 4 GENERAL INFORMATION.................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T.................................................................................................................. 5 4.2 DETAILS OF E.U.T........................................................................................................................................... 5 4.3 CHANNEL LIST................................................................................................................................................. 6 4.4 TEST FACILITY................................................................................................................................................. 6 4.5 TEST LOCATION............................................................................................................................................... 6 5 EQUIPMENT USED DURING TEST................................................................................................................... 7 5.1 EQUIPMENTS LIST........................................................................................................................................... 7 5.2 MEASUREMENT UNCERTAINTY........................................................................................................................ 7 5.3 TEST EQUIPMENT CALIBRATION..................................................................................................................... 7 6 CONDUCTED EMISSION..................................................................................................................................... 8 6.1 E.U.T. OPERATION.......................................................................................................................................... 8 6.2 EUT SETUP..................................................................................................................................................... 8 6.3 CONDUCTED EMISSION TEST RESULT............................................................................................................ 9 7 SPURIOUS RADIATED EMISSIONS............................................................................................................... 11 7.1 EUT OPERATION :......................................................................................................................................... 11 7.2 TEST SETUP.................................................................................................................................................. 12 7.3 SPECTRUM ANALYZER SETUP...................................................................................................................... 13 7.4 TEST PROCEDURE......................................................................................................................................... 14 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION..................................................................................... 14 7.6 SUMMARY OF TEST RESULTS....................................................................................................................... 15 8 SPURIOUS RF CONDUCTED EMISSIONS FR…

Text truncated - open the document above for the full version.

Reference No.: WTD13S0706106E Page 78 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18 Photographs – Test Setup 18.1 Conducted Emissions 18.2 Radiated Emissions Below 30MHz Reference No.: WTD13S0706106E Page 79 of 89 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn From 30-1000MHz Above 1GHz