PVBEMJA003MIBag of Riddim Bluetooth Audio System

1 Bag of Riddim Portable Bluetooth ® Audio System 12 Bag of Riddim Portable Bluetooth ® Audio System Greetings and Welcome to the House of Marley We are honored you have selected Bag of Riddim to become part of your music experience. Bag of Riddim is a portable, two-way, stereo sound system which works with Bluetooth ® devices connected wirelessly and hundreds of other devices via the auxiliary input. The system uses two high-output, long-throw 4.5” (114mm) woofers in a ported enclosure, two 1” (25mm) tweeters and a powerful amplifier. The system includes a convenient REWIND™ carry bag composed of reclaimed hemp, organic cotton, and recycled plastic bottles (RPET). Additional bag options make it easy to change the look of your Bag of Riddim. Check out all of the options at www.thehouseofmarley.com. Everything You Need to Jam The Bag of Riddim comes with the following items: Sound System REWIND™ Carry Bag AC Power Supply (100-240 VAC) 3.5mm Stereo Mini Cable Power Cord for Wall Outlet Powering Your Bag of Riddim Bag of Riddim can be powered by a wall outlet, six (6) D-cell batteries (not included) or an optional 12VDC car power outlet (not included). Using a Wall Outlet 1. Insert the AC power supply cord into the Bag of Riddim. 2. Insert wall plug cord connector into the power supply. 3. Insert wall plug into an appropriate wall outlet. Using Batteries Note: Use only high quality alkaline batteries. 1. Remove the battery door on the bottom of your Bag of Riddim by loosening the two screws with a coin or flat-head screwdriver. 2. Install six (6) D-cell batteries in the orientations shown on the floor of the battery compartment. 3. Replace the battery door making sure the two screws are securely tightened. NOTE: Optional rechargeable batteries available at www.thehouseofmarley.com Using a Car Power Outlet (Not Included) Note: For more information on ordering a car power adaptor, contact The House of Marley. Contact information can be found in the warranty section of this instruction book. 1. Plug the power cord into your Bag of Riddim. 2. Plug the car power plug into a car power outlet. Connecting Your Music Device(s) Pairing Mode (Blinking Blue LED) Bag of Riddim automatically goes into pairing mode for 5 minutes as soon as you turn it on. You can also manually put Bag of Riddim into pairing mode by holding the for 3 seconds. Note: Holding the for 3 seconds will kick off the device currently connected to Bag of Riddim and go into Pairing Mode. (1)(2) (3) Connected Mode (Solid Blue LED) Pair to Bag of Riddim from your Bluetooth-enabled device. Bag of Riddim does not require a pairing password. Once paired, the LED will glow solid blue. Note: Bag of Riddim will automatically pair with the last device connected to it when turned ON (when possible). Connecting other devices The auxiliary input on the front of the Bag of Riddim allows you to connect other audio devices to the system. Simply connect your device to the AUX input on the Bag of Riddim using the 3.5mm stereo mini cable (included). Connecting multiple devices When a device is connected to Bluetooth and another device is connected via auxiliary input, the color of the indicates the source. If the LED glows blue, the Bluetooth device will play. When red, the auxiliary input will play. Toggle between inputs by briefly pressing the . Easy To Use When the system is powered and a device is connected, you are ready to enjoy your Bag of Riddim. 1. Touch the power to turn your Bag of Riddim on. Touch and hold the power icon again to turn your Bag of Riddim off. The red LED on the power icon indicates if the Bag of Riddim is on. 2. Increase or decrease the volume on the Bag of Riddim by touching and/or holding the – and + buttons until the desired volume is reached. You can also adjust the system volume using the controls on your docked music source. Charging Your Device A convenient USB port is available on the front of Bag of Riddim to charge your devices while it is on. Use the cable that came with your device to charge. NOTE: Not all devices are compatible with the USB port. If your device does not charge, use the power adapter that came with it. Important Safety Information 1. Follow and keep these instructions. 2. Heed all warnings. 3. Do not use this apparatus near water. 4. Clean only with a dry cloth. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 8. Only use attachments/accessories specified by the manufacturer. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WEEE EXPLANATION This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. BATTERY DIRECTIVE This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and hea…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: The House of Marley.LLC Address: 3000 Pontiac Trail Commerce Township, Oaklang, Michigan, United States City: Oaklang Country: United States Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dongguan Country: China is authorized to apply for Certification of the following product(s): Product description: Bag of Riddim Bluetooth Audio System Type designation: EM-JA003-MI Trademark: Marley on our behalf. Date: 2012-11-27 City: Oaklang Name: Vladislav Grodzinskiy Function: manager Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-AUG-09 RF_501, Issue 5 Page 1 of 1 Company Name: The House of Marley.LLC Address: 3000 Pontiac Trail Commerce Township, Oaklang, Michigan, United States. City: Oaklang Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: PVBEMJA003MI Reference number: EM-JA003-MI Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2012-11-27 Name and signature of applicant: Vladislav Grodzinskiy Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Neutron Engineering Inc. Project No.: 1208C241 Page 2 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 3 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 4 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 5 of 13

Neutron Engineering Inc. Project No.: 1208C241 Page 6 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 7 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 8 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 9 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 10 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 11 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 12 of 13 Neutron Engineering Inc. Project No.: 1208C241 Page 13 of 13

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: PVBEMJA003MI Project No. : 1208C241 Equipment : Bag of Riddim Bluetooth Audio System with USB port Model : EM-JA003-MI Applicant : The House of Marley, LLC Address : 3000 Pontiac Trail Commerce Township， Oaklang, Michigan, United States According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Ant. Brand name Model Name Antenna TypeConnector Gain (dBi) 1 N/A N/A PIFA AntennaN/A -1.95 TEST RESULTS EUT： Bag of Riddim Bluetooth Audio System Model Name ： EM-JA003-MI Temperature： 25 °C Relative Humidity： 58 % Pressure： 1009 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/ CH39 /CH78 -1Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result -1.95 0.6383 6.61 4.5814 0.000582 1 Complies -1.95 0.6383 5.81 3.8107 0.000484 1 Complies -1.95 0.6383 5.2 3.3113 0.000421 1 Complies EUT： Bag of Riddim Bluetooth Audio System Model Name ： EM-JA003-MI Temperature： 25 °C Relative Humidity： 58 % Pressure： 1009 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/ CH39 /CH78 -3Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result -1.95 0.6383 4.97 3.1405 0.000399 1 Complies -1.95 0.6383 4.28 2.6792 0.000340 1 Complies -1.95 0.6383 3.71 2.3496 0.000299 1 Complies

Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 1 of 112 FCC/IC Radio Test Report FCC ID: PVBEMJA003MI IC: 10613A-EMJA003MI This report concerns (check one) : Original Grant Class II Change Issued Date : Oct. 22, 2012 Project No. : 1208C241 Equipment : Bag of Riddim Bluetooth Audio System Model Name : EM-JA003-MI Applicant : The House of Marley, LLC Address : 3000 Pontiac Trail Commerce Township MI-48390 The USA Manufacturer : The House of Marley, LLC Address : 3000 Pontiac Trail Commerce Township MI-48390 The USA Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 24, 2012 Date of Test: Sep. 24, 2012 ~ Oct. 20, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 2 of 112 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 3 of 112 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 30 5 . NUMBER OF HOPPING CHANNEL 66 5.1 APPLIED PROCEDURES / LIMIT 66 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 66 5.1.2 TEST PROCEDURE 66 5.1.3 DEVIATION FROM STANDARD 66 5.1.4 TEST SETUP 66 5.1.5 EUT OPERATION CONDITIONS 66 5.1.6 TEST RESULTS 67 6 . AVERAGE TIME OF OCCUPANCY 69 Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 4 of 112 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 69 6.1.1 MEASUREMENT INSTRUMENTS LIST 69 6.1.2 TEST PROCEDURE 69 6.1.3 DEVIATION FROM STANDARD 69 6.1.4 TEST SETUP 70 6.1.5 EUT OPERATION CONDITIONS 70 6.1.6 TEST RESULTS 71 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 83 7.1 APPLIED PROCEDURES / LIMIT 83 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 83 7.1.2 TEST PROCEDURE 83 7.1.3 DEVIATION FROM STANDARD 83 7.1.4 TEST SETUP 83 7.1.5 EUT OPERATION CONDITIONS 83 7.1.6 TEST RESULTS 84 8 . BANDWIDTH TEST 88 8.1 APPLIED PROCEDURES / LIMIT 88 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 88 8.1.2 TEST PROCEDURE 88 8.1.3 DEVIATION FROM STANDARD 88 8.1.4 TEST SETUP 88 8.1.5 EUT OPERATION CONDITIONS 88 8.1.6 TEST RESULTS 89 9 . PEAK OUTPUT POWER TEST 93 9.1 APPLIED PROCEDURES / LIMIT 93 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 93 9.1.2 TEST PROCEDURE 93 9.1.3 DEVIATION FROM STANDARD 93 9.1.4 TEST SETUP 93 9.1.5 EUT OPERATION CONDITIONS 93 9.1.6 TEST RESULTS 94 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 98 10.1 APPLIED PROCEDURES / LIMIT 98 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 98 10.1.2 TEST PROCEDURE 98 10.1.3 DEVIATION FROM STANDARD 98 10.1.4 TEST SETUP 98 10.1.5 EUT OPERATION CONDITIONS 98 10.1.6 TEST RESULTS 99 11 . EUT TEST PHOTO 111 Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 5 of 112 1. CERTIFICATION Equipment : Bag of Riddim Bluetooth Audio System Brand Name : Marley Model Name : EM-JA003-MI Applicant : The House of Marley, LLC Factory : Premium Loudspeakers (Huizhou) Co., Ltd Address : Tymphany Industrial Area Xinlian Village, Xinxu Tow, Huizhou City, Guangdong, P.R China Date of Test : Sep. 24, 2012 ~ Oct. 20, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1208C241) were obtained utilizing the test procedures…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 111 of 112 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1208C241 Page 112 of 112 Radiated Measurement Photos