PWX-AX76GSM 850/1800/1900 Mobile Phone

right page (1) of AX76, FCC, LAM-en (19.08.2005, 10:12) © Siemens AG 2004, C:\Siemens\DTP-Satz\Produkte\AX76\ output\AX76_3\AX76_V3_sug_LAM-en_FCC_050819_te\S_PegasusIVZ.fm Table of Contents1 VAR Language: en; VAR issue date: 050613 Legal notices ...................................... 2 Safety precautions ............................. 4 Antenna care ................................... 5 Phone operation .............................. 5 Electronic devices ............................ 6 Overview of the phone ...................... 9 Display symbols ................................ 10 Getting started ................................. 11 Switch on/off, PIN ............................. 12 Emergency number (SOS) .............. 12 General instructions ......................... 12 Security ............................................ 13 Codes ............................................ 13 Calling .............................................. 13 Text entry ......................................... 14 Default book ..................................... 16 Phonebook ....................................... 16 <New entry> .................................. 16 Call (search for an entry) ................ 16 Addressbook ..................................... 16 <New entry> .................................. 16 Change entry ................................. 17 Voice dialling ................................. 17 Records ............................................. 17 Duration/ charges ............................. 17 Voice message/ mailbox .................. 17 SMS ................................................... 18 MMS ................................................. 18 Message setup ................................. 19 Ring tones ........................................ 20 Surf & fun ......................................... 20 Internet browser ............................ 20 Games & more ............................... 20 Setup ................................................ 21 Profiles .......................................... 21 Call setup ...................................... 21 Clock ............................................. 21 Connectivity .................................. 22 Security ......................................... 22 Network ........................................ 23 Accessories ................................... 23 Organizer ......................................... 23 Alarm clock ................................... 23 Calendar ....................................... 23 Appointments ............................... 24 Notes ............................................ 24 Missed alarms ............................... 24 Time zones .................................... 24 Calendar setup .............................. 24 Extras ............................................... 24 Fast access key ................................. 25 Own stuff ......................................... 26 Customer Care ................................. 26 Care and maintenance ..................... 27 Product data ..................................... 28 Accessories ...................................... 29 SAR ................................................. 30 U.S. FDA ........................................... 31 FCC/Industry Canada Notice ............ 35 Ten Driving Safety Tips .................... 36 Intellectual property ........................ 38 End user license agreement ............ 39 Table of Contents © Siemens AG 2004, C:\Siemens\DTP-Satz\Pr odukte\AX76\output\AX76_3\AX76_V3_sug_LAM- left page (2) of AX76, FCC, LAM-en, (19.08.2005, 10:13) Legal notices 2 VAR Language: en; VAR issue date: 050613 Legal notices The mobile phone described in this guide is approved for use on the GSM and GPRS net- works operating on the GSM 850, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries. © 2005 Siemens Information and Communication Mobile, LLC. All rights reserved. Siemens and the AX76 model phone are trademarks or registered trademarks of Siemens AG and/or its affiliates in the United States and/or other countries. T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Disclaimer The information contained in the User Guide is written for the AX76 phone. Siemens reserves the right to make changes and improvements to the products and any of the features of the products described in this document without prior notice. The contents of the user guide are provided "AS IS". Except as required by applicable law, no warranties of any kind, either ex- press or implied, including, but not limited to, the implied warranties of merchantabili- ty and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Siemens re- serves the right to revise the user guide or withdraw it at any time without prior no- tice. Under no circumstances shall Siemens be responsible for any loss of data or in- come or any special, incidental, consequen- tial or indirect damages howsoever caused. Export Information The mobile phone may be subject to export regulation of the United States and other countries. Diversion contrary to law is pro- hibited. You must comply with all applica- ble export laws, restrictions and regulations of the United States foreign agencies or au- thorities, and may not export, or transfer for the purpose of re-export, the mobile phone or any part of the phone in violation of any applicable restrictions, laws or regu- lations, or without all necessary approvals. Network Services A number of features included in this guide are called Network Services. They are special services provid…

Text truncated - open the document above for the full version.

Siemens Communications, Inc. Siemens Communications, Inc. 16745 West Bernardo Drive Suite 120 San Diego, CA 92127 Tel. 858-521-3200 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 August 22, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Siemens Communications, Inc requests confidentiality for the following products: FCC ID Number Product Title/Model PWX – AX76 Tri -Band/AX76 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Parts List 4) Technical Description Required for section 2.1003 (c) • Operational Description 5) Tune-up Procedure No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Siemens Communications, Inc trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Kevin Wolentarski Regulatory Engineer

Siemens Communications, Inc. AX76 Front View. Siemens Communications, Inc. AX76 Back View Siemens Communications, Inc. AX76 Side View Siemens Communications, Inc. AX76 Side View

Date 25.04.2005 Approval label Name Li Gang AX76/IMEI-Label/Standard MP PD LPD Z30880-Z9999-Z27-* 1 25.04.05 Li_G LETTERING PLAN Version Date Token SIEMENS AG DIS 144684 Page 1 From 1 A24850-V1-A4-2 VORSTD.DOC White label with black lettering Label according to DIS 144684 Figure 1 Placement of IMEI label on AX76

Siemens Communications, Inc. AX76 Open Battery Cover (Final label: See extra exhibit) Siemens Communications, Inc. AX76 Disassembly Step 1 Siemens Communications, Inc. AX76 Disassembly Step 2 Siemens Communications, Inc. AX76 Disassembly Step 3 Siemens Communications, Inc. AX76 Back view shields removed Siemens Communications, Inc. AX76 Back view repair lid installed Siemens Communications, Inc. AX76 Tri-Band Antenna

DAT-P-152/98-01 SAR Report, Siemens_6620_529_FCC_850_1900_AX76 Appendix for the Report Dosimetric Assessment of the Siemens AX76 (FCC ID: PWX-AX76) According to the FCC Requirements August 12, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16745 West Bernado Drive, Suite 400 San Diego-CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory.

DAT-P-152/98-01 SAR Report, Siemens_6620_529_FCC_850_1900_SAR Plots_AX76 Page 1 of 29 Appendix for the Report Dosimetric Assessment of the Siemens AX76 (FCC ID: PWX-AX76) According to the FCC Requirements SAR Distribution Plots August 11, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16475 West Bernado Drive, Suite 400 San Diego CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH SAR Report, Siemens_6620_529_FCC_850_1900_SAR Plots_AX76 Page 2 of 29 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Table of Contents 1 SAR DISTRIBUTION PLOTS, GSM 850 HEAD ............................................................................................. 3 2 SAR DISTRIBUTION PLOTS, GSM 850 HEAD WITH CAMERA .............................................................. 7 3 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD...........................................................................................11 4 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD WITH CAMERA............................................................ 15 5 SAR DISTRIBUTION PLOTS, GSM 850 BODY IN GSM MODE .............................................................. 19 6 SAR DISTRIBUTION PLOTS, GSM 850 BODY IN GSM MODE WITH HEADSET .............................. 20 7 SAR DISTRIBUTION PLOTS, GSM 850 BODY WITH DATA CABLE IN GPRS MODE (CLASS 8) . 21 8 SAR DISTRIBUTION PLOTS, PCS 1900 BODY IN GSM MODE .............................................................. 22 9 SAR DISTRIBUTION PLOTS, PCS 190 BODY IN GSM MODE WITH HEADSET................................ 23 10 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH DATA CABLE IN GPRS MODE (CLASS 8) . 24 11 SAR Z-AXIS SCANS (VALIDATION) ............................................................................................................ 26 12 SAR Z-AXIS SCANS (MEASUREMENTS) ................................................................................................... 28 SAR Report, Siemens_6620_529_FCC_850_1900_SAR Plots_AX76 Page 3 of 29 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH 1 SAR Distribution Plots, GSM 850 Head Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 538balm_1.da4 DUT: Siemens; Type: AX76 ; Serial: 004400012074538 Program Name: Cheek Left Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Left/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.549 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.8 V/m; Power Drift = 0.042 dB Peak SAR (extrapolated) = 0.942 W/kg SAR(1 g) = 0.593 mW/g; SAR(10 g) = 0.397 mW/g Maximum value of SAR (measured) = 0.645 mW/g SAR Report, Siemens_6620_529_FCC_850_1900_SAR Plots_AX76 Page 4 of 29 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Fig. 1: SAR distribution for GSM 850, channel 190, cheek position, left side of head (August 02, 2005; Ambient Temp.: 21.9∞ C; Liquid Temperature: 21.4∞ C). Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 538balm_2.da4 DUT: Siemens; Type: AX76 ; Serial: 004400012074538 Program Name: Tilted Left Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilted Left/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.454 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.0 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.772 W/kg SAR(1 g) = 0.439 mW/g; SAR(10 g) = 0.293 mW/g Maximum value of SAR (measured) = 0.474 mW/g SAR Report, Siemens_6620_529_FCC_850_1900_SAR Plots_AX76 Page 5 of 29 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Fig. 2: SAR distribution for GSM 850, channel 190, tilted position, left side of head (August 02, 2005; Ambient Temp.: 22.0∞ C; Liquid Temperature: 21.4∞ C). Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 538barm_1.da4 DUT: Siemens; Type: AX76 ; Serial: 004400012074538 Program Name: Cheek Right Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Right/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.483 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.8 V/m; Power Drift = -0.071 dB Peak SAR (extrapolated) = 0.878 W/kg SAR(1 g) = 0.530 mW/g; SAR(10 g) = 0.347 mW/g Maximum value of SAR (measured) = 0.575 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 1: Measurement grid: …

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR Report, Siemens_6620_529_FCC_850_1900_AX76 Page 1 of 46 Report Dosimetric Assessment of the Portable Device Siemens AX76 (FCC ID: PWX-AX76) According to the FCC Requirements August 05, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16745 West Bernado Drive, Suite 400 San Diego-CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH SAR Report, Siemens_6620_529_FCC_850_1900_AX76 Page 2 of 46 dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH Executive Summary The AX76 is a mobile phone (Portable Device) from Siemens operating in the 850 MHz, 1800 MHz and 1900 MHz frequency range. The device has an integrated antenna and the system concepts used are the GSM 850, GSM 1800 and PCS 1900 standards including GPRS Class 8 capability. The objective of the measurements done by IMST was the dosimetric assessment of one device in the GSM 850 and PCS 1900 standards. The examinations have been carried out with the dosimetric assessment system ÑDASY4ì. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. The Siemens AX76 mobile phone (FCC ID: PWX-AX76) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following configurations: Body worn with the following accessories: • GSM without accessory (10 mm distance) • GSM with headset (10 mm distance) • GPRS (Class 8) with data cable (10 mm distance) prepared by: ........................................... reviewed by: ..................................... Frank Schmidt AndrÈ van den Bosch test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gaufl-Strafle 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 378 Fax +49- 2842-981 399 email: [email protected] SAR Report, Siemens_6620_529_FCC_850_1900_AX76 Page 3 of 46 dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH Table of Contents 1 SUBJECT OF INVESTIGATION.................................................................................................................... 4 2 THE IEEE STANDARD C95.1 AND THE FCC EXPOSURE CRITERIA................................................. 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS....................................... 5 2.3 SAR LIMIT.................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR....................................................................................... 6 4 BODY-WORN CONFIGURATIONS.............................................................................................................. 9 4.1 POC (PTT) POSITION...............................................................................................................................9 4.2 PHANTOM REQUIREMENTS...................................................................................................................... 10 4.3 TEST TO BE PERFORMED......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM................................................................................................................. 10 5.1 PHANTOM................................................................................................................................................. 12 5.2 PROBE...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE.................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT................................................................................................................... 14 6 SAR RESULTS............................................................................................................................................... 15 7 EVALUATION................................................................................................................................................. 19 8 APPENDIX....................................................................................................................................................... 22 8.1 ADMINISTRATIVE DATA............................................................................................................................ 22 8.2 DEVICE UNDER TEST AND TEST CONDITIONS......................................................................................... 22 8.3 TISSUE RECIPES...................................................................................................................................... 23 8.4 MATERIAL PARAMETERS......................................................................................................................... 24 8.5 SIMPLIFIED PERFORMANCE CHECKING................................................................................................... 24 8.6 EN…

Text truncated - open the document above for the full version.

1 of 5 ________________________________________________________________________________ Siemens Communications, Inc Project: AX76 Date: 28-07-2005 Test case: Conducted power report Page: 1 of 5 - 1 - Report No: FCC_AX76.doc Test Report Conducted Output power GSM 850 and GSM 1900 Report No: FCC_AX76 Issue date: July 28, 2005 Test Site: Siemens A/S Mobile Phones Development ICM MP PD HW 1 AAL 1 DK-9400 Noerresundby Denmark Tel.: +45 72 19 50 00 Fax.: +45 72 19 50 02 Arne Bisgaard Kristensen Part Project Leader EMC & Antenna Morten Christensen Line Group Manager EMC & Antenna 2 of 5 ________________________________________________________________________________ Siemens Communications, Inc Project: AX76 Date: 28-07-2005 Test case: Conducted power report Page: 2 of 5 - 2 - Report No: FCC_AX76.doc Contents 1 Objective and Method............................................................................... 3 2 Results........................................................................................................ 3 2.1 GSM 850 ................................................................................................................ 3 2.2 GSM 1900 .............................................................................................................. 3 3 Minutes of Test .......................................................................................... 3 3.1 Description of device under test ............................................................................. 3 3.2 Measurement Set-up .............................................................................................. 4 4 Calibration Certificate ............................................................................... 5 3 of 5 ________________________________________________________________________________ Siemens Communications, Inc Project: AX76 Date: 28-07-2005 Test case: Conducted power report Page: 3 of 5 - 3 - Report No: FCC_AX76.doc 1 Objective and Method FCC approval for mobile phones requires reporting output power at RF output terminal pursuant to title 47 CFR part 2.1046. SIEMENS devices feature a special 50 Ohm RF connector suitable for such measurements. Using a special adapter and connecting the phone to an appropriate load in terms of the input port of the measurement equipment used, we hereby report the values for highest power setting. 2 Results 2.1 GSM 850 Table 1: Results of power measurements at connector in the GSM 850 Band 2.2 GSM 1900 Average Power during burst at connector Device Ch. 512 1850.2 MHz Ch. 661 1880.0 MHz Ch. 810 1909.8 MHz Siemens AX76, #9 SAR IMEI: 004400012073803 + 29.19 dBm + 29.12 dBm + 28.98 dBm Siemens AX76, #6 SAR IMEI: 004400012074538 + 29.27 dBm + 29.18 dBm + 29.05 dBm Siemens AX76, #4 Cetecom IMEI: 004400012074512 + 29.27 dBm + 29.15 dBm + 28.99 dBm Siemens AX76, #5 Cetecom IMEI: 004400012074048 + 29.33 dBm + 29.2 dBm + 28.95 dBm Table 2: Results of power measurements at connector in the GSM 1900 Band 3 Minutes of Test 3.1 Description of device under test Mobile phone: Siemens AX76 Frequency range GSM 850: 824 – 894 MHz Average Power during burst at connector Device Ch. 128 824.2 MHz Ch. 190 836.6 MHz Ch. 251 848.8 MHz Siemens AX76, #9 SAR IMEI: 004400012073803 + 31.65 dBm + 31.84 dBm + 31.94 dBm Siemens AX76, #6 SAR IMEI: 004400012074538 + 31.68 dBm + 31.83 dBm + 31.95 dBm Siemens AX76, #4 Cetecom IMEI: 004400012074512 + 31.76 dBm + 31.82 dBm + 31.96 dBm Siemens AX76, #5 Cetecom IMEI: 004400012074048 + 31.62 dBm + 31.79 dBm + 31.90 dBm 4 of 5 ________________________________________________________________________________ Siemens Communications, Inc Project: AX76 Date: 28-07-2005 Test case: Conducted power report Page: 4 of 5 - 4 - Report No: FCC_AX76.doc Frequency range GSM 1900: 1850 – 1990 MHz Siemens Part number: L36880-N2870-xxxx FCC ID: PWX-AX76 IC ID: 267E-AX76 3.2 Measurement Set-up Figure 1: Block Diagram of set-up for conducted power measurement Figure 2: Set-up for conducted power measurement Base Station Simulator DUT Special Adapter 5 of 5 ________________________________________________________________________________ Siemens Communications, Inc Project: AX76 Date: 28-07-2005 Test case: Conducted power report Page: 5 of 5 - 5 - Report No: FCC_AX76.doc 4 Calibration Certificate

TTI-P-G 081/94-A0 Accredited according to ISO/IEC 17025 Bluetooth Qualification Test Facility (BQTF) FCC listed # 101450 IC recognized # 3925 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM FCC Test Report FCC Part 22,24 / RSS 132,133 FOR: TRI-BAND GSM MOBILE PHONE MODEL #: AX76 SIEMENS INFORMATION AND COMMUNICATION MOBILE LLC 16745 WEST BERNARDO DRIVE SUITE 120 SAN DIEGO, CALIFORNIA 92127 U.S.A FCC ID: PWX-AX76 IC ID: 267E-AX76 TEST REPORT #: EMC_1016_2005_FCC22/24 DATE: AUGUST 23, 2005 Test Report #: EMC_1016_2005_FCC22/24 Date of Report: 2005-08-23 Page 2 of 94 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT .................................................................................................................................... 4 2 ADMINISTRATIVE DATA............................................................................................................... 5 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT......................... 5 2.2 IDENTIFICATION OF THE CLIENT................................................................................................... 5 2.3 IDENTIFICATION OF THE MANUFACTURER.................................................................................... 5 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................ 6 3.1 IDENTIFICATION OF THE EQUIPMENT UNDER TEST....................................................................... 6 4 SUBJECT OF INVESTIGATION..................................................................................................... 7 5 MEASUREMENTS............................................................................................................................. 8 5.1 RF POWER OUTPUT....................................................................................................................... 8 5.1.1 FCC 2.1046 Measurements required: RF power output....................................................... 8 5.1.2 Limits: ................................................................................................................................... 8 5.1.2.1 FCC 22.913 (a) Effective radiated power limits. .............................................................. 8 5.1.2.2 FCC 24.232 (b)(c) Power limits. ....................................................................................... 8 5.1.3 Conducted Output Power Measurement procedure:............................................................. 8 5.1.4 Results 850 MHz band(conducted): ...................................................................................... 9 5.1.5 Results 1900 MHz band(conducted): .................................................................................... 9 5.1.6 Radiated Output Power Measurement procedure:.............................................................. 10 5.1.7 ERP Results 850 MHz band: ............................................................................................... 11 5.1.8 EIRP Results 1900 MHz band:............................................................................................ 11 5.2 OCCUPIED BANDWIDTH/EMISSION BANDWIDTH........................................................................ 18 5.2.1 FCC 2.1049 Measurements required: Occupied bandwidth............................................... 18 5.2.2 Occupied / emission bandwidth measurement procedure:.................................................. 18 5.2.3 Occupied / Emission bandwidth results 850 MHz band: .................................................... 19 5.2.4 Occupied / Emission bandwidth results 1900 MHz band: .................................................. 26 5.3 FREQUENCY STABILITY............................................................................................................... 33 5.3.1 Limit .................................................................................................................................... 33 5.3.2 FREQUENCY STABILITY (GSM-850) ............................................................................... 34 5.3.3 FREQUENCY STABILITY (PCS-1900) .............................................................................. 35 5.4 SPURIOUS EMISSIONS CONDUCTED............................................................................................. 36 5.4.1 FCC 2.1051 Measurements required: Spurious emissions at antenna terminals. .............. 36 5.4.2 Limits:…

Text truncated - open the document above for the full version.