PWX-CF76GSM 850/1800/1900 Mobile Phone

Table of Contents1 right page (1) of CF76 SUG 140 mm us-en A31008-H6090-A40-1-4A19 (28.09.2005, 11:45) © Siemens AG 2004, E:\Auftrag\Siemens\M obilePhones\FCCs\cf76\SUG\S_ADONIS_IVZ.fm Template: X75, Version 2.2; VAR La nguage: am; VAR issue date: 050718 Legal notices ...................................... 2 Safety precautions ............................. 4 Telephone list ..................................... 9 Display symbols ................................ 11 Getting started ................................. 12 Switch on/off, PIN ............................. 13 General instructions ......................... 14 Standard features ............................. 15 Security ............................................ 16 Text entry ......................................... 17 Calling .............................................. 19 Default book ..................................... 20 Address book .................................... 20 Phonebook ....................................... 21 Call records ....................................... 22 Dur./charges ..................................... 22 Camera ............................................. 23 Message list ...................................... 24 SMS ................................................... 24 MMS ................................................. 25 E-mail ............................................... 27 Voice message/CB ............................ 28 Surf & fun ......................................... 28 Setup ................................................ 30 Fast access key ................................. 36 Organizer ......................................... 37 Extras ............................................... 38 My stuff ............................................ 41 Mobile Phone Manager ................... 42 Accessories ...................................... 42 Customer Care ................................. 43 Care and maintenance ..................... 45 Product data ..................................... 46 SAR ................................................. 47 U.S. FDA ........................................... 48 FCC/Industry Canada Notice ............ 52 Ten Driving Safety Tips .................... 53 Intellectual Property ........................ 55 End user license agreement ............ 56 Menu tree ........................................ 59 Index ................................................ 61 Table of Contents This is a sum- marized ver- sion of the Operating Manual. The complete ver- sion can be found on the Internet at: www.sie- mens.com/ cf75 Legal notices2 © Siemens AG 2004, E:\Auftrag\Siemens\Mob ilePhones\FCCs\cf76\SUG\am_LegalNotices.fm left page (2) of CF76 SUG 140 mm us-en, A31008-H6090-A40-1-4A19 (28.09.2005, 11:45) Template: X75, Version 2.2; VAR La nguage: am; VAR issue date: 050718 Legal notices The mobile phone described in this guide is approved for use on the GSM and GPRS net- works operating on the GSM 850, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries. © 2005 Siemens Information and Communication Mobile, LLC. All rights reserved. Siemens and the CF76 model phone are trademarks or registered trademarks of Siemens AG and/or its affiliates in the United States and/or other countries. T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Disclaimer THE INFORMATION CONTAINED IN THE USER GUIDE IS WRITTEN FOR THE CF76 PHONE. SIEMENS RESERVES THE RIGHT TO MAKE CHANGES AND IMPROVEMENTS TO THE PRODUCTS AND ANY OF THE FEA- TURES OF THE PRODUCTS DESCRIBED IN THIS DOCUMENT WITHOUT PRIOR NO- TICE. THE CONTENTS OF THE USER GUIDE ARE PROVIDED "AS IS". EXCEPT AS RE- QUIRED BY APPLICABLE LAW, NO WAR- RANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMIT- ED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RE- LATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. SIEMENS RESERVES THE RIGHT TO REVISE THE USER GUIDE OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. UN- DER NO CIRCUMSTANCES SHALL SIEMENS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDEN- TAL, CONSEQUENTIAL OR INDIRECT DAM- AGES HOWSOEVER CAUSED. Export Information The mobile phone may be subject to ex- port regulation of the United States and other countries. Diversion contrary to law is prohibited. You must comply with all applicable export laws, restrictions and regulations of the United States foreign agencies or authorities, and may not ex- port, or transfer for the purpose of re-ex- port, the mobile phone or any part of the phone in violation of any applicable re- strictions, laws or regulations, or without all necessary approvals. Network Services A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. In order to use any of these Network Services, you must sub- scribe to these service(s) from your ser- vice provider and obtain instructions for their use. Some of these Network Servic- es may not be available when roaming on a network other than your home network. Standby and Talk Time Information The mobile phone incorporates features that are new to the mobile phone world. These may include color displays and lighting, graphic games, music reproduc- tion and browsing the Internet. The way you use the display and the features will affect the performance of the battery and how long it lasts between charge cycles. The quoted standby times and talk times show the minimum and maximum per- 3Legal notices right page (3) of CF76 SUG 140 mm us-en A31008-H6090-A40-1-4A19…

Text truncated - open the document above for the full version.

Siemens Communications, Inc. Siemens Communications, Inc. 16745 West Bernardo Drive Suite 120 San Diego, CA 92127 Tel. 858-521-3200 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 August 22, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Siemens Communications, Inc requests confidentiality for the following products: FCC ID Number Product Title/Model PWX – CF76 Tri -Band/CF76 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Parts List 4) Technical Description Required for section 2.1003 (c) • Operational Description 5) Tune-up Procedure No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Siemens Communications, Inc trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Kevin Wolentarski Regulatory Engineer

Page 1 of 3 Front View Rear View CF76 Clamshell Opened Page 2 of 3 CF76 Side View Page 3 of 3 CF76 Clamshell Closed

27CC Z30880-Z9999-Z27-* IMEI LPT1 300DPI Labelname Partno. baselabel Description Resolution T y p e Printer STANDARD / NO BAND / CE 0682 / NO BITMAPS / NO SPECIAL Add. information (# INFO 4 #) FCC ID: PWX-CF76 Add.information (# INFO 5 #) IC: 267E-CF76 Produkttyp (# INFO 2 #) CF76 CE_0682_SYMBOL BMP CORPORATE-LOGO BMP Datecode assignment by PICS Devicepartnumber S30XXX-SXXXX-XXXX-1 IMEI as barcode assignment by PICS IMEI as plain writing assignment by PICS Made in text depending on product location BOM-181798-01-000 12/08/2005 1 Page 1 of 12/08/2005 1 Page 1 of LabelDocument V7.04 23/05/2005 Name Zhi Wang_Zhi Documentnumber CF76 IMEL Lable Placement Label according to BOM-181798-01-000

Page 1 of 7 CF76 Open Battery Cover Page 2 of 7 CF76 Disassembly Step 1 Page 3 of 7 GSM Tri-band Antenna CF76 Disassembly Step 2 Page 4 of 7 CF76 Antenna Disassembly Page 5 of 7 CF76 Disassembly Step 3 Page 6 of 7 CF76 Disassembly Step 4 Page 7 of 7 CF76 Disassembly Step 5

DAT-P-152/98-01 SAR Report, Siemens_6620_535_FCC_850_1900_CF76 Appendix for the Report Dosimetric Assessment of the Siemens CF76 (FCC ID: PWX-CF76) According to the FCC Requirements September 09, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16745 West Bernado Drive, Suite 400 San Diego-CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory.

DAT-P-152/98-01 SAR Report, Siemens_6620_535_FCC_850_1900_SAR Plots_CF76 Page 1 of 38 Appendix for the Report Dosimetric Assessment of the Siemens CF76 (FCC ID: PWX-CF76) According to the FCC Requirements SAR Distribution Plots August 30, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16475 West Bernado Drive, Suite 400 San Diego CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH SAR Report, Siemens_6620_535_FCC_850_1900_SAR Plots_CF76 Page 2 of 38 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Table of Contents 1 SAR DISTRIBUTION PLOTS, GSM 850 HEAD WITHOUT FLASH........................................................ 3 2 SAR DISTRIBUTION PLOTS, GSM 850 HEAD WITH FLASH.............................................................. 11 3 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD WITHOUT FLASH.................................................... 15 4 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD WITH FLASH............................................................. 23 5 SAR DISTRIBUTION PLOTS, GSM 850 BODY WITHOUT ACCESSORY IN GSM MODE............. 27 6 SAR DISTRIBUTION PLOTS, GSM 850 BODY WITH HEADSET IN GSM MODE............................ 28 7 SAR DISTRIBUTION PLOTS, GSM 850 BODY WITHOUT ACCESSORY IN GPRS MODE........... 29 8 SAR DISTRIBUTION PLOTS, GSM 850 BODY WITH DATA CABLE IN GPRS MODE................... 30 9 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITHOUT ACCESSORY IN GSM MODE............ 31 10 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH HEADSET IN GSM MODE.......................... 32 11 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITHOUT ACCESSORY IN GPRS MODE.......... 33 12 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH DATA CABLE IN GPRS MODE................. 34 13 SAR Z-AXIS SCANS (VALIDATION)......................................................................................................... 35 14 SAR Z-AXIS SCANS (MEASUREMENTS)................................................................................................ 37 SAR Report, Siemens_6620_535_FCC_850_1900_SAR Plots_CF76 Page 3 of 38 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH 1 SAR Distribution Plots, GSM 850 Head without flash Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 179balm_1.da4 DUT: Siemens; Type: CF76; Serial: 004400014517179 Program Name: Cheek Left Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.92 mho/m; ε r = 41.1; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Left/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.02 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.0 V/m; Power Drift = -0.052 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.962 mW/g; SAR(10 g) = 0.621 mW/g Maximum value of SAR (measured) = 1.03 mW/g Fig. 1: SAR distribution for GSM 850, channel 190, cheek position, left side of head (August 18, 2005; Ambient Temperature: 22.0∞ C; Liquid Temperature: 21.0∞ C). SAR Report, Siemens_6620_535_FCC_850_1900_SAR Plots_CF76 Page 4 of 38 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 179balm_2.da4 DUT: Siemens; Type: CF76; Serial: 004400014517179 Program Name: Tilted Left Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.92 mho/m; ε r = 41.1; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilted Left/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.239 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.7 V/m; Power Drift = -0.053 dB Peak SAR (extrapolated) = 0.298 W/kg SAR(1 g) = 0.232 mW/g; SAR(10 g) = 0.171 mW/g Maximum value of SAR (measured) = 0.244 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.7 V/m; Power Drift = -0.053 dB Peak SAR (extrapolated) = 0.270 W/kg SAR(1 g) = 0.187 mW/g; SAR(10 g) = 0.120 mW/g Maximum value of SAR (measured) = 0.216 mW/g Fig. 2: SAR distribution for GSM 850, channel 190, tilted position, left side of head (August 18, 2005; Ambient Temperature: 22.0∞ C; Liquid Temperature : 21.1∞ C). SAR Report, Siemens_6620_535_FCC_850_1900_SAR Plots_CF76 Page 5 of 38 dasy_report_fcc_850_1900_plots_1.1.doc/04.07.2005/CH Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 179barm_1.da4 DUT: Siemens; Type: CF76; Serial: 004400014517179 Program Name: Cheek Right Communication System: GSM 850; Frequency: 836.6 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 836.6 MHz; σ = 0.92 mho/m; ε r = 41.1; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(6.61, 6.61, 6.61); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Right/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (mea…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR Report, Siemens_6620_535_FCC_850_1900_CF76 Page 1 of 45 Report Dosimetric Assessment of the Portable Device Siemens CF76 (FCC ID: PWX-CF76) According to the FCC Requirements August 29, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16745 West Bernado Drive, Suite 400 San Diego-CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH SAR Report, Siemens_6620_535_FCC_850_1900_CF76 Page 2 of 45 dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH Executive Summary The CF76 is a mobile phone (Portable Device) from Siemens operating in the 850 MHz, 1800 MHz and 1900 MHz frequency range. The device has an integrated antenna and the system concepts used are the GSM 850, GSM 1800 and PCS 1900 standards including GPRS Class 10 capability. The objective of the measurements done by IMST was the dosimetric assessment of one device in the GSM 850 and PCS 1900 standards, with and without flash. The examinations have been carried out with the dosimetric assessment system ÑDASY4ì. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. The Siemens CF76 mobile phone (FCC ID: PWX-CF76) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following configurations: Body worn with the following accessories: • GSM without accessory (15 mm distance) • GSM with headset (15 mm distance) • GPRS (Class 10) with and without data cable (15 mm distance) prepared by: ........................................... reviewed by: ..................................... Alexander Rahn AndrÈ van den Bosch test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gaufl-Strafle 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 378 Fax +49- 2842-981 399 email: [email protected] SAR Report, Siemens_6620_535_FCC_850_1900_CF76 Page 3 of 45 dasy_report_fcc_850_1900_4.3.doc/22.07.2005/CH Table of Contents 1 SUBJECT OF INVESTIGATION.................................................................................................................... 4 2 THE IEEE STANDARD C95.1 AND THE FCC EXPOSURE CRITERIA................................................. 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS....................................... 5 2.3 SAR LIMIT.................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR....................................................................................... 6 4 BODY-WORN CONFIGURATIONS.............................................................................................................. 9 4.1 POC (PTT) POSITION...............................................................................................................................9 4.2 PHANTOM REQUIREMENTS...................................................................................................................... 10 4.3 TEST TO BE PERFORMED......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM................................................................................................................. 10 5.1 PHANTOM................................................................................................................................................. 12 5.2 PROBE...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE.................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT................................................................................................................... 14 6 SAR RESULTS............................................................................................................................................... 15 7 EVALUATION................................................................................................................................................. 19 8 APPENDIX....................................................................................................................................................... 22 8.1 ADMINISTRATIVE DATA............................................................................................................................ 22 8.2 DEVICE UNDER TEST AND TEST CONDITIONS......................................................................................... 22 8.3 TISSUE RECIPES...................................................................................................................................... 23 8.4 MATERIAL PARAMETERS......................................................................................................................... 23 8.5 SIMPLIFIED PERFORMANCE CHECKING......................................................................…

Text truncated - open the document above for the full version.

Siemens Communications, Inc. CF76 - Conducted Output Power Contents 1 Objective and Method..............................................................................3 2 Device under test......................................................................................3 3 Measurement Set-up................................................................................3 4 Test Result................................................................................................5 Annex 1 Calibration Certificate.....................................................................7 Page 2 / 7 Siemens Communications, Inc. CF76 - Conducted Output Power 1 Objective and Method FCC approval for mobile phone requires reporting output power at RF output terminal pursuant to title 47 CFR part 2.1046. SIEMENS devices use special test fixtures with 50 Ohm connection suitable for such measurements. Using a special adapter and connecting the phone to an appropriate load in terms of the input port of the measurement equipment used, we hereby report the values for highest power setting. 2 Device under test Mobile Phone: Siemens CF76 (GSM850/PCN1800/PCS1900) Frequency Range GSM 850: 824– 894 MHz Frequency Range GSM 1800: 1710 – 1880 MHz Frequency Range GSM 1900: 1850 – 1990 MHz Siemens Part Number: S30880-S6090-* There are 10 devices has been tested listed in “Chapter 4 Test Result”. 3 Measurement Set-up Figure 1: Block Diagram of set-up for conducted power measurement Base Station Simulator DUT Special Adapter Base Station Simulator CMU 200 Serial Number 105851 Software Version Base 3.61 / GSM 3.61 Calibration Certification Annex 1 Test Voltage: 4.0 V Temperature: Room Temperature Page 3 / 7 Siemens Communications, Inc. CF76 - Conducted Output Power Figure 2: Set-up for conducted power measurement Page 4 / 7 Siemens Communications, Inc. CF76 - Conducted Output Power 4 Test Result Conducted Output Power (GSM850 Band) EUTs Average Power during burst at phone connector (dBm) CF76 IMEI Ch. 128 824.2 MHz Ch. 190 836.6 MHz Ch. 251 848.8 MHz FCC Emission Sample #1 004400014518219 31.6 31.5 31.5 FCC Emission Sample #2 004400014517500 31.6 31.4 31.4 FCC Emission Sample #3 004400014517179 31.6 31.5 31.5 FCC Emission Sample #4 004400014517153 31.6 31.5 31.5 FCC Emission Sample #5 004400014518318 31.6 31.5 31.6 FCC Emission Sample #6 004400014516874 31.6 31.4 31.5 FCC Emission Sample #7 004400014516965 31.6 31.5 31.5 FCC Emission Sample #8 004400014516932 31.6 31.4 31.4 FCC Emission Sample #9 004400014517799 31.6 31.4 31.5 FCC Emission Sample #10 004400014517575 31.6 31.4 31.4 Page 5 / 7 Siemens Communications, Inc. CF76 - Conducted Output Power Conducted Output Power (PCS1900 Band) EUTs Average Power during burst at phone connector (dBm) CF76 IMEI Ch. 512 1850.2 MHz Ch. 661 1880.0 MHz Ch. 810 1909.8 MHz FCC Emission Sample #1 00440001451821928.8 28.9 28.9 FCC Emission Sample #2 00440001451750028.8 28.8 28.9 FCC Emission Sample #3 00440001451717928.8 28.9 28.9 FCC Emission Sample #4 00440001451715328.8 28.9 29.0 FCC Emission Sample #5 00440001451831828.8 28.9 28.9 FCC Emission Sample #6 00440001451687428.8 28.9 29.0 FCC Emission Sample #7 00440001451696528.8 28.9 28.9 FCC Emission Sample #8 00440001451693228.9 29.0 29.0 FCC Emission Sample #9 00440001451779928.8 28.8 28.9 FCC Emission Sample #10 00440001451757528.9 29.0 29.0 Page 6 / 7 Siemens Communications, Inc. CF76 - Conducted Output Power Annex 1 Calibration Certificate Page 7 / 7

TTI-P-G 081/94-A0 Accredited according to ISO/IEC 17025 Bluetooth Qualification Test Facility (BQTF) FCC listed # 101450 IC recognized # 3925 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM FCC Test Report FCC Part 22,24 / RSS 132,133 FOR: TRI-BAND GSM MOBILE PHONE MODEL #: CF76 SIEMENS COMMUNICATIONS, INC. 16745 WEST BERNARDO DRIVE SUITE 120 SAN DIEGO, CA 92127 U.S.A FCC ID: PWX-CF76 IC ID: 267E-CF76 TEST REPORT #: EMC_1028_2005_FCC22/24 DATE: SEPTEMBER 02, 2005 Test Report #: EMC_1028_2005_FCC22/24 Date of Report: 2005-09-02 Page 2 of 94 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT .................................................................................................................................... 4 2 ADMINISTRATIVE DATA............................................................................................................... 5 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT......................... 5 2.2 IDENTIFICATION OF THE CLIENT................................................................................................... 5 2.3 IDENTIFICATION OF THE MANUFACTURER.................................................................................... 5 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................ 6 3.1 IDENTIFICATION OF THE EQUIPMENT UNDER TEST....................................................................... 6 4 SUBJECT OF INVESTIGATION..................................................................................................... 7 5 MEASUREMENTS............................................................................................................................. 8 5.1 RF POWER OUTPUT....................................................................................................................... 8 5.1.1 FCC 2.1046 Measurements required: RF power output....................................................... 8 5.1.2 Limits: ................................................................................................................................... 8 5.1.2.1 FCC 22.913 (a) Effective radiated power limits. .............................................................. 8 5.1.2.2 FCC 24.232 (b)(c) Power limits. ....................................................................................... 8 5.1.3 Conducted Output Power Measurement procedure:............................................................. 8 5.1.4 Results 850 MHz band(conducted): ...................................................................................... 9 5.1.5 Results 1900 MHz band(conducted): .................................................................................... 9 5.1.6 Radiated Output Power Measurement procedure:.............................................................. 10 5.1.7 ERP Results 850 MHz band: ............................................................................................... 11 5.1.8 EIRP Results 1900 MHz band:............................................................................................ 11 5.2 OCCUPIED BANDWIDTH/EMISSION BANDWIDTH........................................................................ 18 5.2.1 FCC 2.1049 Measurements required: Occupied bandwidth............................................... 18 5.2.2 Occupied / emission bandwidth measurement procedure:.................................................. 18 5.2.3 Occupied / Emission bandwidth results 850 MHz band: .................................................... 19 5.2.4 Occupied / Emission bandwidth results 1900 MHz band: .................................................. 26 5.3 FREQUENCY STABILITY............................................................................................................... 33 5.3.1 Limit .................................................................................................................................... 33 5.3.2 FREQUENCY STABILITY (GSM-850) ............................................................................... 34 5.3.3 FREQUENCY STABILITY (PCS-1900) .............................................................................. 35 5.4 SPURIOUS EMISSIONS CONDUCTED............................................................................................. 36 5.4.1 FCC 2.1051 Measurements required: Spurious emissions at antenna terminals. .............. 36 5.4.2 Limits: ................................................................................................................................. 36 5.4.2.1 FCC 22.917 Emission limitations for cellular equipment. ............................................. 36 5.4.2.2 FCC 24.238 Emission limitations for Broadband PCS equipment. ............................... 36 5.4.3 Conducted out of band emissions measurement procedure: ............................................... 37 5.4.4 Bandedge Results GSM-850 ................................................................................................ 38 5.4.5 Conducted Spurious Results GSM-850 ................................................…

Text truncated - open the document above for the full version.