PWX-SL75Tri-Band GSM Mobile Phone with BT

Table of Contents1 See also Index at the end of this User Guide right page (1) of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:40) © Siemens AG 2003, E:\Auftrag\Siemens\M obilePhones\FCCs\sl75\FUG\HYDRA_FUGIVZ.fm Template: X75, Version 2.2;VAR La nguage: am; VAR issue date: 050822 Legal notices .............................. 3 Safety precautions ..................... 5 Antenna care ........................... 7 Phone operation ...................... 7 Phone overview ....................... 11 Display symbols ....................... 13 Getting started ......................... 15 Inserting SIM card/battery ...... 15 Charging the battery .............. 16 Switching on/off, PIN entry ...... 18 General instructions ................ 19 User guide ............................. 19 Slider ..................................... 19 Standby mode ....................... 20 Tabs ...................................... 20 Digital Rights Mgmt. (DRM) .... 20 Menu controls ........................ 21 Centre key ............................. 21 Standard functions ................. 22 Security .................................... 23 PIN code ................................ 23 Text input ................................. 25 Calling ...................................... 29 Ending a call .......................... 29 Setting the volume ................ 29 Accept call ............................. 30 Rejecting a call ....................... 31 Handsfree .............................. 31 Swapping between 2 calls ...... 31 Conference ............................ 32 Call options ............................ 33 Direct call ............................... 33 Tone sequences (DTMF) ......... 34 Contacts .................................... 35 All contacts ............................ 35 Groups ................................... 36 Online status .......................... 36 SIM ........................................ 37 Filter ...................................... 37 General options ...................... 38 Call records ............................... 40 Dur./charges ............................. 41 Camera ..................................... 42 SMS/MMS .................................. 45 Writing an SMS ....................... 45 Writing an MMS ...................... 46 Receive .................................. 48 Reading .................................. 48 Draft ...................................... 49 Outbox ................................... 49 Sent ....................................... 49 Archive ................................... 49 Templates .............................. 49 General settings ..................... 50 SMS settings ........................... 50 MMS settings ......................... 52 Save aft. send ......................... 52 Zoom in ................................. 52 Emoticons .............................. 52 E-mail ........................................ 53 Writing/sending ...................... 53 Receiving/reading ................... 54 Draft ...................................... 55 Archive ................................... 55 Settings .................................. 55 Table of Contents See also In- dex at the end of this User Guide 2Table of Contents See also Index at the end of this User Guide © Siemens AG 2003, E:\Auftrag\Siemens\M obilePhones\FCCs\sl75\FUG\HYDRA_FUGIVZ.fm left page (2) of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:40) Template: X75, Version 2.2;VAR La nguage: am; VAR issue date: 050822 WAP push ................................. 57 Chat room ................................ 58 Voice mailbox/Mailbox ............ 63 CB services ............................... 64 Internet .................................... 65 Settings .................................... 68 Profiles .................................. 68 Ringtones .............................. 70 Topics .................................... 71 Display ................................... 72 Silent alert ............................. 73 Phone Pilot ............................ 74 Connectivity .......................... 75 Shortcuts ............................... 79 Call settings ........................... 81 Phone setup ........................... 83 Clock ..................................... 86 Security ................................. 87 Network ................................ 89 Accessories ............................ 91 Organizer ................................. 93 Calendar ................................ 93 Appointments ........................ 94 Tasks ..................................... 96 Notes ..................................... 96 Dictat.machine ...................... 97 Time zones ............................ 98 Remote synchronisation ......... 99 Extras ...................................... 101 SIM services (optional) ......... 101 My applications .................... 101 Calculator ............................. 101 Unit converter ...................... 102 Online status ........................ 103 Sound recorder ..................... 104 Stopwatch ............................ 105 Countdown .......................... 106 Date calculator ..................... 106 My menu .............................. 106 Alarm clock ............................. 108 Media player ........................... 109 My stuff .................................. 112 Mobile Phone Manager .......... 115 Questions & Answers ............. 118 Customer Care ........................ 122 Care and maintenance ........... 124 Product data ........................... 125 SAR ......................................... 126 Accessories ............................. 127 U.S. FDA .................................. 129 FCC/Industry Canada Notice ... 135 Intellectual Property ............... 136 Ten Driving Safety Tips ........... 137 End user license agreement ... 139 Menu tree ............................... 143 Index ....................................... 149…

Text truncated - open the document above for the full version.

Siemens Communications Haidenauplatz 1 81667 München Germany Tel. +49 89 722 37148 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 October 10, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Siemens Communications requests confidentiality for the following products: FCC ID Number Product Title/Model PWX–SL75 Tri -Band/SL75 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Parts List 4) Technical Description Required for section 2.1003 (c) • Operational Description 5) Tune-up Procedure No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Siemens Communications trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Dr. Martin Weinberger Engineering Manager

Siemens Communications SL75 - Front View Siemens Communications SL75 - Back View Siemens Communications SL75 - Front View (open slider) Siemens Communications SL75 - Right View Siemens Communications SL75 - Left View

Confidential Confidential Confidential SL75 - Label

Confidential SL75 - Open Battery Cover Confidential SL75 - open Front Cover Confidential SL75 - open Back Cover (with antenna), Printed Circuit Board with labeling Confidential SL75 - Printed Circuit Board, back view Confidential SL75 - Printed Circuit Board, front view Confidential SL75 - Printed Circuit Board, back view with shield lid removed Confidential SL75 - Printed Circuit Board, front view with shielding lid removed Confidential SL75 - Printed Circuit Board, front view, closeup Confidential SL75 –Display-conenctor Confidential SL75 – Display-connector with removed slider-mechanics Confidential SL75 – Printed Circuit Board and display-unit with removed flex-cable Confidential SL75 – Upper-Part of slider with display removed, display

DAT-P-152/98-01 SAR Report, Siemens_6620_506_FCC_1900_SL75 Page 1 of 42 Report Dosimetric Assessment of the Portable Device Siemens SL75 (FCC ID: PWX-SL75) According to the FCC Requirements September 08, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Information & Communication Mobile LLC 16475 West bernado Drive, Suite 400 CA 92127 San Diego The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_1900_4.3.doc/22.07.2005/CH SAR Report, Siemens_6620_506_FCC_1900_SL75 Page 2 of 42 dasy_report_fcc_1900_4.3.doc/22.07.2005/CH Executive Summary The SL75 is a mobile phone (Portable Device) from Siemens operating in the 900 MHz, 1800 MHz and 1900 MHz frequency range. The device has an integrated antenna and the system concepts used are the GSM 900, GSM 1800 and PCS 1900 standards including GPRS Class 10. The objective of the measurements done by IMST was the dosimetric assessment of one device in the PCS 1900 standard with slider up and down. The examinations have been carried out with the dosimetric assessment system ÑDASY4ì. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. The Siemens SL75 mobile phone (FCC ID: PWX-SL75) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following configurations: Body worn with the following accessories: • GSM without accessory, slider up and down (15 mm distance) • GSM with headset, slider up and down (15 mm distance) • GPRS (Class 10) without accessory, slider up and down (20 mm distance) • GPRS (Class 10) with data cable, slider up and down (20 mm distance) • GPRS (Class 10) with BT activated, slider up and down (20 mm distance) prepared by: ........................................... reviewed by: ..................................... Alexander Rahn AndrÈ van den Bosch test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gaufl-Strafle 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 378 Fax +49- 2842-981 399 email: [email protected] SAR Report, Siemens_6620_506_FCC_1900_SL75 Page 3 of 42 dasy_report_fcc_1900_4.3.doc/22.07.2005/CH Table of Contents 1 SUBJECT OF INVESTIGATION.................................................................................................................... 4 2 THE IEEE STANDARD C95.1 AND THE FCC EXPOSURE CRITERIA................................................. 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS....................................... 4 2.3 SAR LIMIT.................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR....................................................................................... 6 4 BODY-WORN CONFIGURATIONS.............................................................................................................. 9 4.1 POC (PTT) POSITION...............................................................................................................................9 4.2 PHANTOM REQUIREMENTS...................................................................................................................... 10 4.3 TEST TO BE PERFORMED......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM................................................................................................................. 10 5.1 PHANTOM................................................................................................................................................. 12 5.2 PROBE...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE.................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT................................................................................................................... 14 6 SAR RESULTS............................................................................................................................................... 15 7 EVALUATION................................................................................................................................................. 18 8 APPENDIX....................................................................................................................................................... 20 8.1 ADMINISTRATIVE DATA............................................................................................................................ 20 8.2 DEVICE UNDER TEST AND TEST CONDITIONS......................................................................................... 20 8.3 TISSUE RECIPES...................................................................................................................................... 21 8.4 MATERIAL PARAMETERS.............................................................…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 Appendix for the Report Dosimetric Assessment of the Portable Device Siemens SL75 (FCC ID: PWX-SL75) According to the FCC Requirements Calibration Data September 08, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 1900_cal_data_2 .0.doc/08.01.200 5/CH D-47475 Kamp-Lintfort Customer Siemens Information & Communication Mobile LLC 16475 West Bernado Drive, Suite 400 San Diego-CA 92127 DASY Test-Report, Siemens_6620_506_FCC_1900_Cal Data_SL75 dasy_report_fcc_ This report shall not be reproduced except in full without the written approval of the testing laboratory.

DAT-P-152/98-01 SAR Report, Siemens_6620_506_FCC_1900_SAR Plots_SL75 Page 1 of 22 Appendix for the Report Dosimetric Assessment of the Siemens SL75 (FCC ID: PWX-SL75) According to the FCC Requirements SAR Distribution Plots September 08, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16475 West Bernado Drive, Suite 400 San Diego CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH SAR Report, Siemens_6620_506_FCC_1900_SAR Plots_SL75 Page 2 of 22 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Table of Contents 1 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD SLIDER UP.................................................................. 3 2 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD SLIDER DOWN........................................................... 7 3 SAR DISTRIBUTION PLOTS, PCS 1900 BODY, GSM MODE, WITHOUT ACCESSORY............... 11 4 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH HEADSET....................................................... 13 5 SAR DISTRIBUTION PLOTS, GPRS 1900 (CLASS 10) BODY, WITHOUT ACCESSORY............. 15 6 SAR DISTRIBUTION PLOTS, GPRS 1900 (CLASS 10) BODY, WITH DATA CABLE..................... 17 7 SAR DISTRIBUTION PLOTS, GPRS 1900 (CLASS 10) BODY, WITH BLUETOOTH ACTIVATED19 8 SAR Z-AXIS SCANS (VALIDATION)......................................................................................................... 21 9 SAR Z-AXIS SCANS (MEASUREMENTS)................................................................................................ 22 SAR Report, Siemens_6620_506_FCC_1900_SAR Plots_SL75 Page 3 of 22 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH 1 SAR Distribution Plots, PCS 1900 Head slider up Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 143bplm_1_su.da4 DUT: Siemens ; Type: SL75; Serial: 004400009254143 Program Name: Cheek Left Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.47 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.28, 5.28, 5.28); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 07.07.2005 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Left/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.150 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.18 V/m; Power Drift = -0.062 dB Peak SAR (extrapolated) = 0.193 W/kg SAR(1 g) = 0.144 mW/g; SAR(10 g) = 0.092 mW/g Maximum value of SAR (measured) = 0.157 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.18 V/m; Power Drift = -0.062 dB Peak SAR (extrapolated) = 0.196 W/kg SAR(1 g) = 0.127 mW/g; SAR(10 g) = 0.080 mW/g Maximum value of SAR (measured) = 0.137 mW/g Fig. 1: SAR distribution for PCS 1900, channel 661, cheek position, left side of head (September 05, 2005; Ambient Temperature: 22.3∞C; Liquid Temperature: 20.9∞C). SAR Report, Siemens_6620_506_FCC_1900_SAR Plots_SL75 Page 4 of 22 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 143bplm_2_su.da4 DUT: Siemens ; Type: SL75; Serial: 004400009254143 Program Name: Tilted Left Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.47 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.28, 5.28, 5.28); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 07.07.2005 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilted Left/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.154 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.69 V/m; Power Drift = 0.056 dB Peak SAR (extrapolated) = 0.216 W/kg SAR(1 g) = 0.142 mW/g; SAR(10 g) = 0.086 mW/g Maximum value of SAR (measured) = 0.155 mW/g Fig. 2: SAR distribution for PCS 1900, channel 661, tilted position, left side of head (September 05, 2005; Ambient Temperature: 22.3∞ C; Liquid Temperature : 20.9∞ C). SAR Report, Siemens_6620_506_FCC_1900_SAR Plots_SL75 Page 5 of 22 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 143bprm_1_su.da4 DUT: Siemens ; Type: SL75; Serial: 004400009254143 Program Name: Cheek Right Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.47 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.28, 5.28, 5.28); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 07.07.2005 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Right/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.153 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.74 V/m; Power Drift = 0.022 dB Peak SAR (extrapolated) = 0.246 W/kg SAR(1 g) = 0.158 mW/g; SAR(10 g) = 0.097 mW/g Maximum value of SAR (measured) = 0.172 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.74 V/m; Power Drift = 0.022 dB Peak SAR (extrapolated) = 0.177 W/kg SAR(1 g) = 0.125 mW/g; SAR(10 g) = 0.079 mW/g Ma…

Text truncated - open the document above for the full version.

1 of 5 Test Report Conducted Output power GSM 1900 Report No: EMC_SL75 Issue date: July 11, 2005 Test Site: Siemens A/S Mobile Phones Development ICM MP PD HW 1 AAL 1 DK-9400 Noerresundby Denmark Tel.: +45 72 19 50 00 Fax.: +45 72 19 50 02 Payman Ahmadi Part Project Leader EMC & Antenna Morten Christensen Line Group Manager EMC & Antenna ________________________________________________________________________________ Siemens Communications, Inc Project: SL75 Date: 11-07-2005 Test case: Conducted power report Page: 1 of 5 - 1 - Report No: FCC_SL75 2 of 5 Contents 1 Objective and Method..............................................................................3 2 Results.......................................................................................................3 2.1 GSM 1900...............................................................................................................3 3 Minutes of Test.........................................................................................3 3.1 Description of device under test..............................................................................3 3.2 Measurement Set-up...............................................................................................4 4 Calibration Certificate..............................................................................5 ________________________________________________________________________________ Siemens Communications, Inc Project: SL75 Date: 11-07-2005 Test case: Conducted power report Page: 2 of 5 - 2 - Report No: FCC_SL75 3 of 5 1 Objective and Method FCC approval for mobile phones requires reporting output power at RF output terminal pursuant to title 47 CFR part 2.1046. SIEMENS devices feature a special 50 Ohm RF connector suitable for such measurements. Using a special adapter and connecting the phone to an appropriate load in terms of the input port of the measurement equipment used, we hereby report the values for highest power setting. 2 Results 2.1 GSM 1900 Average Power during burst at connector Ch. 512 1850.2MHz Ch. 661 1880.0MHz Ch. 810 1909.8MHz Device GSM EDGE GSM EDGE GSM EDGE Siemens SL75, (B2.2 7254) White IMEI: 00440009254140 (SAR) 30,51 24,55 30,33 24,60 30,32 24,74 Siemens SL75, (B2.2 7257) Silver IMEI: 004400009253180 (SAR) 30,53 24,50 30,35 24,57 30,30 24,74 Siemens SL75, (B2.2 7262) White IMEI: 004400009253970 30,51 24,51 30,32 24,61 30,31 24,77 Siemens SL75, (B2.2 7282) White IMEI: 004400009254036 30,55 24,51 30,36 24,56 30,30 24,77 Siemens SL75, (B2.2 7278) Silver IMEI: 004400009253657 30,55 24,52 30,33 24,59 30,29 24,80 Table 2: Results of power measurements at connector in the GSM 1900 Band (dBm) 3 Minutes of Test 3.1 Description of device under test Mobile phone: Siemens SL75 Frequency range GSM 1900: 1850 – 1990 MHz Siemens Part number: L36880-N3300-xxxx FCC ID: PWX-SL75 IC ID: 267E-SL75 ________________________________________________________________________________ Siemens Communications, Inc Project: SL75 Date: 11-07-2005 Test case: Conducted power report Page: 3 of 5 - 3 - Report No: FCC_SL75 4 of 5 3.2 Measurement Set-up Base Station Simulator DUT Special Adapter Figure 1: Block Diagram of set-up for conducted power measurement Figure 2: Set-up for conducted power measurement ________________________________________________________________________________ Siemens Communications, Inc Project: SL75 Date: 11-07-2005 Test case: Conducted power report Page: 4 of 5 - 4 - Report No: FCC_SL75 5 of 5 4 Calibration Certificate ________________________________________________________________________________ Siemens Communications, Inc Project: SL75 Date: 11-07-2005 Test case: Conducted power report Page: 5 of 5 - 5 - Report No: FCC_SL75

TTI-P-G 081/94-A0 Accredited according to ISO/IEC 17025 Bluetooth Qualification Test Facility (BQTF) FCC listed # 101450 IC recognized # 3925 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM FCC Test Report FCC Part 24 / RSS 133 FOR: TRI-BAND GSM MOBILE PHONE WITH BLUETOOTH MODEL #: SL75 SIEMENS COMMUNICATIONS HAIDENAUPLATZ 1 81667 MUNCHEN GERMANY FCC ID: PWX-SL75 IC ID: 267E-SL75 TEST REPORT #: EMC_1053_2005_FCC24_REV2 DATE: OCTOBER 18, 2005 Test Report #: EMC_1053_2005_FCC24_REV2 Date of Report: 2005-10-18 Page 2 of 70 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT .................................................................................................................................... 4 2 ADMINISTRATIVE DATA............................................................................................................... 5 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT......................... 5 2.2 IDENTIFICATION OF THE CLIENT................................................................................................... 5 2.3 IDENTIFICATION OF THE MANUFACTURER.................................................................................... 5 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................ 6 3.1 IDENTIFICATION OF THE EQUIPMENT UNDER TEST....................................................................... 6 4 SUBJECT OF INVESTIGATION..................................................................................................... 7 5 MEASUREMENTS............................................................................................................................. 8 5.1 RF POWER OUTPUT....................................................................................................................... 8 5.1.1 FCC 2.1046 Measurements required: RF power output....................................................... 8 5.1.2 Limits: ................................................................................................................................... 8 5.1.2.1 FCC 24.232 (b)(c) Power limits. ....................................................................................... 8 5.1.3 Conducted Output Power Measurement procedure:............................................................. 8 5.1.4 Results 1900 MHz band(conducted): .................................................................................... 9 5.1.5 Radiated Output Power Measurement procedure:.............................................................. 10 5.1.6 EIRP Results 1900 MHz band:............................................................................................ 11 5.2 OCCUPIED BANDWIDTH/EMISSION BANDWIDTH........................................................................ 12 5.2.1 FCC 2.1049 Measurements required: Occupied bandwidth............................................... 12 5.2.2 Occupied / emission bandwidth measurement procedure:.................................................. 12 5.2.3 Occupied / Emission bandwidth results 1900 MHz band (GMSK): .................................... 13 5.2.4 Occupied / Emission bandwidth results 1900 MHz band (8PSK):...................................... 13 5.3 FREQUENCY STABILITY............................................................................................................... 26 5.3.1 Limit .................................................................................................................................... 26 5.3.2 FREQUENCY STABILITY (PCS-1900) .............................................................................. 27 5.4 SPURIOUS EMISSIONS CONDUCTED............................................................................................. 28 5.4.1 FCC 2.1051 Measurements required: Spurious emissions at antenna terminals. .............. 28 5.4.2 Limits: ................................................................................................................................. 28 5.4.2.1 FCC 24.238 Emission limitations for Broadband PCS equipment. ............................... 28 5.4.3 Conducted out of band emissions measurement procedure: ............................................... 28 5.4.4 Bandedge Results PCS-1900 ............................................................................................... 30 5.4.5 Conducted Spurious Results PCS-1900 .............................................................................. 32 5.5 SPURIOUS EMISSIONS RADIATED................................................................................................ 36 5.5.1 FCC 2.1053 Measurements required: Field strength of spurious radiation....................... 36 5.5.2 Limits: ................................................................................................................................. 36 5.5.2.1 F…

Text truncated - open the document above for the full version.