PWXA70GSM 900/1800/1900 Mobile Phone

1 Legal notices right page (1) of A70 Dorado, 140mm, us-en A31008-H2770-A1-4-7619 (05.10.2005, 11:51) © Siemens AG 2004, E:\Auftrag\Siemens\Mob ilePhones\FCCs\a70\SUG\am_LegalNotices.fm VAR Language: am; VAR issue date: 050302 Legal notices The mobile phone described in this guide is approved for use on the GSM and GPRS net- works operating on the GSM 900, 1800 (DCS/PCN) and 1900 (PCS) bands. It is approved for use in the country where it was originally sold and may be approved for use in other countries. © 2005 Siemens Information and Communication Mobile, LLC. All rights reserved. Siemens and the A70 model phone are trademarks or registered trademarks of Siemens AG and/or its affiliates in the United States and/or other countries. T9® is a registered trademark of America Online, Inc. in the United States. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S and other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Disclaimer THE INFORMATION CONTAINED IN THE USER GUIDE IS WRITTEN FOR THE A70 PHONE. SIEMENS RESERVES THE RIGHT TO MAKE CHANGES AND IMPROVEMENTS TO THE PRODUCTS AND ANY OF THE FEA- TURES OF THE PRODUCTS DESCRIBED IN THIS DOCUMENT WITHOUT PRIOR NO- TICE. THE CONTENTS OF THE USER GUIDE ARE PROVIDED "AS IS". EXCEPT AS RE- QUIRED BY APPLICABLE LAW, NO WAR- RANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMIT- ED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RE- LATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. SIEMENS RESERVES THE RIGHT TO REVISE THE USER GUIDE OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. UN- DER NO CIRCUMSTANCES SHALL SIEMENS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDEN- TAL, CONSEQUENTIAL OR INDIRECT DAM- AGES HOWSOEVER CAUSED. Export Information The mobile phone may be subject to ex- port regulation of the United States and other countries. Diversion contrary to law is prohibited. You must comply with all applicable export laws, restrictions and regulations of the United States foreign agencies or authorities, and may not ex- port, or transfer for the purpose of re-ex- port, the mobile phone or any part of the phone in violation of any applicable re- strictions, laws or regulations, or without all necessary approvals. Network Services A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. In order to use any of these Network Services, you must sub- scribe to these service(s) from your serv- ice provider and obtain instructions for their use. Some of these Network Servic- es may not be available when roaming on a network other than your home network. Standby and Talk Time Information The mobile phone incorporates features that are new to the mobile phone world. These may include color displays and lighting, graphic games, music reproduc- tion and browsing the Internet. The way you use the display and the features will affect the performance of the battery and how long it lasts between charge cycles. The quoted standby times and talk times show the minimum and maximum per- Legal notices 2 © Siemens AG 2004, E:\Auftrag\Siemens\Mob ilePhones\FCCs\a70\SU G\am_LegalNotices.fm left page (2) of A70 Dorado, 140mm, us-en, A31008-H2770-A1-4-7619 (05.10.2005, 11:51) VAR Language: am; VAR issue date: 050302 formance that can be expected from the battery under normal network conditions and with the default settings as set by the factory. However, playing games (particu- larly with the backlight continuously switched on) and listening to music will shorten the time available for standby and to make and receive telephone calls. Operation times also vary depending on network conditions, SIM settings, charg- ing and battery condition, how you use your phone and other factors. Memory The mobile phone contains an internal memory device that stores the software required to operate the mobile phone, communicate with the GSM/GPRS net- work and provide the user interface. Some features in the internal memory run additional devices and some addition- al games and utilities. The amount of memory available in the mobile phone is finite and may be insufficient to store large numbers of applications and files. Warning! Remember to back up your data and to do so fre- quently. Always back up all data and programs before sending the mobile phone in for repair. 3 Safety precautions right page (3) of A70 Dorado, 140mm, us-en A31008-H2770-A1-4-7619 (05.10.2005, 12:21) © Siemens AG 2004, E:\Auftrag\Siemens\Mob ilePhones\FCCs\a70\SUG\Dorado_Security.fm VAR Language: am; VAR issue date: 050302 Safety precautions Information for parents Please read the operating instructions and safety precautions carefully before use. Explain the content and the hazards associated with using the phone to your children. Remember to comply with legal re- quirements and local restrictions when using the phone. For example in aeroplanes, petrol stations, hos- pitals or while driving. Cellular phones can interfere with the functioning of medical devices such as hearing aids or pace- makers. Keep at least 9 inches (20 cm) between phone and pace- maker. When using the cell phone hold it to the ear which is farthest from the pacemaker. For more in- formation consult your doctor. The ringtone, info tones and speak- erphone talking are reproduced through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the speakerphone function. Other- wise you risk serious, permanent damage to your hearing. Only use original Siemens batteries (100 % mercury-free) and – charg- ing devices. Otherwise you risk seri- ous damage to health and property. The battery could explode, for in- stance. Small parts such as the SIM card, sealing stop, lens ring and lens cap c…

Text truncated - open the document above for the full version.

Siemens Communications Haidenauplatz 1 81667 München Germany Tel. +49 89 722 37148 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 October 6, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Siemens Communications requests confidentiality for the following products: FCC ID Number Product Title/Model PWXA70 Tri -Band/A70 For the product stated above, we request that the following information be held confidential: 1) Electrical Schematics of the Circuitry 2) Block Diagram 3) Parts List 4) Technical Description Required for section 2.1003 (c) • Operational Description 5) Tune-up Procedure No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Siemens Communications trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Dr. Martin Weinberger Engineering Manager

Siemens A70 Front View Confidential Page 1 of 3 Siemens Communications, Inc. Siemens A70 Rear View Confidential Page 2 of 3 Siemens Communications, Inc. Siemens A70 Side View Confidential Page 3 of 3 Siemens Communications, Inc.

85CCB Z30880-Z9999-Z85-* IMEI LPT1 300DPI Labelname Partno. baselabel Description Resolution T y p e Printer A70/IMEI/Z85/STD/BQ Add. information (# INFO 4 #) FCC ID: PWXA70 Add.information (# INFO 5 #) IC: 267E-A70 Devicepartnumber S30XXX-SXXXX-XXXX-1 Produkttyp (# INFO 2 #) A70 BENQ BMP IMEI as plain writing assignment by PICS Made in text depending on product location IMEI as barcode assignment by PICS CE_0682_SYMBOL BMP Datecode assignment by PICS BOM-121839-04-000 9/29/2005 1 Page 1 of 9/29/2005 1 Page 1 of LabelDocument V7.05 8/4/2005 Name Dai Documentnumber

Siemens Communications, Inc. A70 Open Battery Cover Confidential Page 1 of 4 Siemens Communications, Inc. A70 Disassembly Step 1 Confidential Page 2 of 4 Siemens Communications, Inc. A70 Disassembly Step 2 Confidential Page 3 of 4 Siemens Communications, Inc. A70 Disassembly Step 3 Confidential Page 4 of 4

DAT-P-152/98-01 SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 1 of 11 Appendix for the Report Dosimetric Assessment of the Siemens A70 (FCC ID: PWXA70) According to the FCC Requirements SAR Distribution Plots August 31, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Communication Inc. 16475 West Bernado Drive, Suite 400 San Diego CA 92127 The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 2 of 11 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Table of Contents 1 SAR DISTRIBUTION PLOTS, PCS 1900 HEAD........................................................................................ 3 2 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH HEADSET IN GSM MODE............................ 7 3 SAR DISTRIBUTION PLOTS, PCS 1900 BODY WITH DATA CABLE IN GPRS MODE................... 9 4 SAR Z-AXIS SCANS (VALIDATION)......................................................................................................... 10 5 SAR Z-AXIS SCANS (MEASUREMENTS)................................................................................................ 11 SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 3 of 11 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH 1 SAR Distribution Plots, PCS 1900 Head Test Laboratory: IMST GmbH, DASY Yellow (II); File Name: 672yplm_1.da4 DUT: Siemens; Type: A70; Serial: 004400000168672 Program Name: Cheek Left Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.44 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.11, 5.11, 5.11); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Left/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.248 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.7 V/m; Power Drift = -0.046 dB Peak SAR (extrapolated) = 0.377 W/kg SAR(1 g) = 0.237 mW/g; SAR(10 g) = 0.135 mW/g Maximum value of SAR (measured) = 0.259 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.7 V/m; Power Drift = -0.046 dB Peak SAR (extrapolated) = 0.205 W/kg SAR(1 g) = 0.117 mW/g; SAR(10 g) = 0.073 mW/g Maximum value of SAR (measured) = 0.133 mW/g Fig. 1: SAR distribution for PCS 1900, channel 661, cheek position, left side of head (August 29, 2005; Ambient Temperature: 22.3∞ C; Liquid Temperature:21.5∞ C). SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 4 of 11 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Test Laboratory: IMST GmbH, DASY Yellow (II); File Name: 672yplm_2.da4 DUT: Siemens; Type: A70; Serial: 004400000168672 Program Name: Tilted Left Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.44 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.11, 5.11, 5.11); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Tilted Left/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.297 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.1 V/m; Power Drift = 0.025 dB Peak SAR (extrapolated) = 0.449 W/kg SAR(1 g) = 0.273 mW/g; SAR(10 g) = 0.155 mW/g Maximum value of SAR (measured) = 0.304 mW/g Fig. 2: SAR distribution for PCS 1900, channel 661, tilted position, left side of head (August 29, 2005; Ambient Temperature:22.2∞C; Liquid Temperature:21.4∞ C). SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 5 of 11 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Test Laboratory: IMST GmbH, DASY Yellow (II); File Name: 672yprm_1.da4 DUT: Siemens; Type: A70; Serial: 004400000168672 Program Name: Cheek Right Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.44 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.11, 5.11, 5.11); Calibrated: 13.01.2005 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 17.03.2005 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek Right/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.346 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.9 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 0.662 W/kg SAR(1 g) = 0.373 mW/g; SAR(10 g) = 0.200 mW/g Maximum value of SAR (measured) = 0.409 mW/g Fig. 3: SAR distribution for PCS 1900, channel 661, cheek position, right side of head (August 29, 2005; Ambient Temperature: 22.4∞ C; Liquid Temperature:21.5∞ C). SAR Report, Siemens_6620_536_FCC_1900_SAR Plots_A70 Page 6 of 11 dasy_report_fcc_1900_plots_1.1.doc/08.07.2005/CH Test Laboratory: IMST GmbH, DASY Yellow (II); File Name: 672yprm_2.da4 DUT: Siemens; Type: A70; Serial: 004400000168672 Program Name: Tilted Right Communication System: GSM 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.44 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom sectio…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 Appendix for the Report Dosimetric Assessment of the Portable Device Siemens A70 (FCC ID: PWXA70) According to the FCC Requirements Calibration Data August 31, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 1900_cal_data_2 .0.doc/08.01.200 5/CH D-47475 Kamp-Lintfort Customer Siemens Information & Communication Mobile LLC 16475 West Bernado Drive, Suite 400 San Diego-CA 92127 DASY Test-Report, Siemens_6620_536_FCC_1900_Cal Data_A70 dasy_report_fcc_ This report shall not be reproduced except in full without the written approval of the testing laboratory.

DAT-P-152/98-01 SAR Report, Siemens_6620_536_FCC_1900_A70_2 Page 1 of 35 Report Dosimetric Assessment of the Portable Device Siemens A70 (FCC ID: PWXA70) According to the FCC Requirements August 31, 2005 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Siemens Information & Communication Mobile LLC 16475 West Bernado Drive, Suite 400 CA 92127 San Diego The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_1900_4.3.doc/22.07.2005/CH SAR Report, Siemens_6620_536_FCC_1900_A70_2 Page 2 of 35 dasy_report_fcc_1900_4.3.doc/22.07.2005/CH Executive Summary The A70 is a mobile phone (Portable Device) from Siemens operating in the 900 MHz, 1800 MHz and 1900 MHz frequency range. The device has an integrated antenna and the system concepts used are the GSM 900, GSM 1800 and PCS 1900 standards including GPRS Class 8. The objective of the measurements done by IMST was the dosimetric assessment of one device in the PCS 1900 standard. The examinations have been carried out with the dosimetric assessment system ÑDASY4ì. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. The Siemens A70 mobile phone (FCC ID: PWXA70) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following configurations: Body worn with the following accessories: • GSM with headset and FCT 650 carry case (10 mm distance) • GSM with headset and FCL 600 carry case (13 mm distance) • GPRS (Class 8) with data cable and FCL 600 carry case (13 mm distance) prepared by: ................. .......................... reviewed by: ..................................... Frank Schmidt AndrÈ van den Bosch test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gaufl-Strafle 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 378 Fax +49- 2842-981 399 email: [email protected] SAR Report, Siemens_6620_536_FCC_1900_A70_2 Page 3 of 35 dasy_report_fcc_1900_4.3.doc/22.07.2005/CH Table of Contents 1 SUBJECT OF INVESTIGATION.................................................................................................................... 4 2 THE IEEE STANDARD C95.1 AND THE FCC EXPOSURE CRITERIA................................................. 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS....................................... 5 2.3 SAR LIMIT.................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR....................................................................................... 6 4 BODY-WORN CONFIGURATIONS.............................................................................................................. 9 4.1 POC (PTT) POSITION...............................................................................................................................9 4.2 PHANTOM REQUIREMENTS...................................................................................................................... 10 4.3 TEST TO BE PERFORMED......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM................................................................................................................. 10 5.1 PHANTOM................................................................................................................................................. 12 5.2 PROBE...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE.................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT................................................................................................................... 14 6 SAR RESULTS............................................................................................................................................... 15 7 EVALUATION................................................................................................................................................. 17 8 APPENDIX....................................................................................................................................................... 19 8.1 ADMINISTRATIVE DATA............................................................................................................................ 19 8.2 DEVICE UNDER TEST AND TEST CONDITIONS......................................................................................... 19 8.3 TISSUE RECIPES...................................................................................................................................... 19 8.4 MATERIAL PARAMETERS......................................................................................................................... 20 8.5 SIMPLIFIED PERFORMANCE CHECKING............................................................................…

Text truncated - open the document above for the full version.

TTI-P-G 081/94-A0 Accredited according to ISO/IEC 17025 Bluetooth Qualification Test Facility (BQTF) FCC listed # 101450 IC recognized # 3925 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM FCC Test Report FCC Part 24 / RSS 133 FOR: TRI-BAND GSM MOBILE PHONE MODEL #: A70 SIEMENS COMMUNICATIONS HAIDENAUPLATZ 1 81667 MUNCHEN GERMANY FCC ID: PWXA70 IC ID: 267E-A70 TEST REPORT #: EMC_1058_2005_FCC24 DATE: OCTOBER 07, 2005 Test Report #: EMC_1058_2005_FCC24 Date of Report: 2005-10-07 Page 2 of 59 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT .................................................................................................................................... 3 2 ADMINISTRATIVE DATA............................................................................................................... 4 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT......................... 4 2.2 IDENTIFICATION OF THE CLIENT................................................................................................... 4 2.3 IDENTIFICATION OF THE MANUFACTURER.................................................................................... 4 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................ 5 3.1 IDENTIFICATION OF THE EQUIPMENT UNDER TEST....................................................................... 5 4 SUBJECT OF INVESTIGATION..................................................................................................... 6 5 MEASUREMENTS............................................................................................................................. 7 5.1 RF POWER OUTPUT....................................................................................................................... 7 5.1.1 FCC 2.1046 Measurements required: RF power output....................................................... 7 5.1.2 Limits: ................................................................................................................................... 7 5.1.2.1 FCC 24.232 (b)(c) Power limits. ....................................................................................... 7 5.1.3 Conducted Output Power Measurement procedure:............................................................. 7 5.1.4 Results 1900 MHz band(conducted): .................................................................................... 8 5.1.5 Radiated Output Power Measurement procedure:................................................................ 9 5.1.6 EIRP Results 1900 MHz band:............................................................................................ 10 5.2 OCCUPIED BANDWIDTH/EMISSION BANDWIDTH........................................................................ 14 5.2.1 FCC 2.1049 Measurements required: Occupied bandwidth............................................... 14 5.2.2 Occupied / emission bandwidth measurement procedure:.................................................. 14 5.2.3 Occupied / Emission bandwidth results 1900 MHz band: .................................................. 15 5.3 FREQUENCY STABILITY............................................................................................................... 22 5.3.1 Limit .................................................................................................................................... 22 5.3.2 FREQUENCY STABILITY (PCS-1900) .............................................................................. 23 5.4 SPURIOUS EMISSIONS CONDUCTED............................................................................................. 24 5.4.1 FCC 2.1051 Measurements required: Spurious emissions at antenna terminals. .............. 24 5.4.2 Limits: ................................................................................................................................. 24 5.4.2.1 FCC 24.238 Emission limitations for Broadband PCS equipment. ............................... 24 5.4.3 Conducted out of band emissions measurement procedure: ............................................... 24 5.4.4 Bandedge Results PCS-1900 ............................................................................................... 26 5.4.5 Conducted Spurious Results PCS-1900 .............................................................................. 28 5.5 SPURIOUS EMISSIONS RADIATED................................................................................................ 32 5.5.1 FCC 2.1053 Measurements required: Field strength of spurious radiation....................... 32 5.5.2 Limits: ................................................................................................................................. 32 5.5.2.1 FCC 24.238 Emission limitations for Broadband PCS equipment. ............................... 32 5.5.3 Radiated out of band measurement procedure: .................................................................. 33 5.6 RECEIVER RADIATED EMISSIONS § 2.1053 / RSS-133 .................................................... 50 5.6.1 Receiver Spurious on EUT .................................................................................................. 51 5.7 AC POWERLINE CONDUCTED EMISSIONS § 15.107/207 ................................................. 56 5.7.1 Results EUT......................................................................................................................... 57 6 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS ................................................ 58 7 REFERENCES .......…

Text truncated - open the document above for the full version.

Siemens ________________________________________________________________________________ Siemens Communications, Inc - 2 - Contents 1 Objective and Method ..............................................................................3 2 Results.......................................................................................................3 2.1 GSM 850.................................................................................................................. 3 2.2 GSM 1800................................................................................................................ 3 2.3 GSM 1900................................................................................................................ 3 3 Minutes of Test .........................................................................................4 3.1 Description of device under test.................................................................................. 4 3.2 Measurement Set-up................................................................................................. 4 4 Calibration Certificate ..............................................................................5 Siemens ________________________________________________________________________________ Siemens Communications, Inc - 3 - 1 Objective and Method FCC approval for mobile phones requires reporting output power at RF output terminal pursuant to title 47 CFR part 2.1046. SIEMENS devices use special test fixtures with 50 Ohm connection suitable for such measurements. Using a special adapter and connecting the phone to an appropriate load in terms of the input port of the measurement equipment used, we hereby report the values for highest power setting. 2 Results 2.1 GSM 900 Average Power during burst at connector Device Ch. 128 824.2 MHz Ch. 190 836.6 MHz Ch. 251 893.8 MHz 004400015459371 32.3 31.8 31.8 004400015459157 32.3 31.7 31.6 004400015459348 32.4 31.8 31.7 Table 1: Results of power measurements at connector in the GSM 900 Band 2.2 GSM 1800 Average Power during burst at connector Device Ch. 512 1710.2 MHz Ch. 698 1747.4 MHz Ch. 885 1784.8 MHz 004400015459371 29.2 29.7 29.6 004400015459157 29.0 29.5 29.5 004400015459348 29.2 29.6 29.6 Table 2: Results of power measurements at connector in the GSM 1800 Band 2.3 GSM 1900 Average Power during burst at connector Device Ch. 512 1850.2 MHz Ch. 661 1880.0 MHz Ch. 810 1909.8 MHz 004400015459371 29.8 29.4 29.2 004400015459157 29.7 29.3 29.0 004400015459348 29.8 29.4 29.2 Table 3: Results of power measurements at connector in the GSM 1900 Band Siemens ________________________________________________________________________________ Siemens Communications, Inc - 4 - 3 Minutes of Test 3.1 Description of device under test Mobile Phone: Siemens A70 Frequency Range GSM 900: 880 – 915 MHz Frequency Range GSM 1800: 1710 – 1785 MHz Frequency Range GSM 1900: 1850 – 1990 MHz Siemens Part Number: S30880-Q2710-****-* 3.2 Measureme…

Text truncated - open the document above for the full version.