PX8MBDA-200SmBDA Band Wireless Repeater

B B A A N N D D S S E E L L E E C C T T I I V V E E W W I I R R E E L L E E S S S S R R E E P P E E A A T T E E R R USER MANUAL MBDA-200S QE: 1-0-0 Comba Telecom Ltd. mBDA-200S The information contained herein is the responsibility of and is approved by the following, to whom all enquiries should be directed in the first instance: This is an unpublished work the copyright in which vests in Comba International ("Comba"). All rights reserved. The information contained herein is confidential and the property of Comba and is supplied without liability for errors or omissions. No part may be reproduced, disclosed or used except as authorised by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied. USER MANUAL FOR MBDA-200S ENU STATUS : 1-0-0 Copyright - refer to title page Page 3 0.1 CONTENTS Section Page 0.1 CONTENTS .................................................................................................................................................... 3 0.2 INDEX TO FIGURES AND TABLES ................................................................................................................... 5 0.3 HISTORY ....................................................................................................................................................... 7 0.4 GLOSSARY OF TERMS .................................................................................................................................... 8 0.5 SAFETY NOTICES AND ADMONISHMENTS ..................................................................................................... 9 1 GENERAL INFORMATION ............................................................................................................................ 10 2 EQUIPMENT DESCRIPTION .......................................................................................................................... 11 2.1 SYSTEM DIAGRAM ...................................................................................................................................... 11 2.2 EQUIPMENT LAYOUT .................................................................................................................................. 12 2.3 EQUIPMENT CONSTITUTION ....................................................................................................................... 13 2.4 KIT OF PART ................................................................................................................................................ 13 3 INSTALLATION ............................................................................................................................................ 14 3.1 WARNINGS AND ALERTS ............................................................................................................................. 14 3.2 SITE PLANNING CONSIDERATIONS .............................................................................................................. 15 3.3 INSTALLATION PROCEDURES ...................................................................................................................... 16 3.4 EQUIPMENT CONNECTORS ......................................................................................................................... 26 3.5 EQUIPMENT CONNECTION ......................................................................................................................... 27 4 COMMISSIONING ....................................................................................................................................... 29 4.1 PRE-COMMISSIONING TASKS ...................................................................................................................... 29 4.2 LED INDICATORS ......................................................................................................................................... 29 4.3 COMMISSIONING PROCEDURE ................................................................................................................... 30 5 WEB GUI ..................................................................................................................................................... 32 5.1 WEB GUI CONNECTION ............................................................................................................................... 32 5.2 WEB GUI INTRODUCTION ........................................................................................................................... 33 5.2.1 [DEVICES] ............................................................................................................................................... 33 5.2.2 [COMMISSIONING] ................................................................................................................................ 35 5.2.3 [FIRMWARE] .......................................................................................................................................... 36 5.2.4 [MANAGEMENT] .................................................................................................................................... 37 5.3 COMMISSIONING PROCEDURE ................................................................................................................... 43 6 MAINTENANCE ........................................................................................................................................... 49 USER MANUAL FOR MBDA-200S ENU STATUS : 1-0-0 Copyright - refer to title page Page 4 7 APPENDICES ............................................................................................................................................... 50 7.1 APPENDIX A: TOOLS FOR INSTALLATION AND MAINTENANCE .................................................................... 50 7.2 APPENDIX B: RMA (RETURN MATERIAL AUTHORIZATION) ......................…

Text truncated - open the document above for the full version.

April 4, 2014 Mr. Jim Dillard Dearborn County Hospital 600 Wilson Creek Rd. Lawrenceburg, OH 47025 Re: Repeater or Other Radio Frequency Enhancer Located at 600 Wilson Creek Rd., Lawrenceburg, IN 47025 Dear Mr. Dillard, AT&T Mobility National Accounts LLC and its affiliates (collectively, “AT&T”) must ensure that the integrity of the AT&T network is maintained so that AT&T can provide you and other subscribers with quality service and avoid harmful interference to other FCC licensees. Moreover, the FCC requires AT&T to maintain operational control over any transmitting device deployed within AT&T’s network, whether such device is using AT&T’s assigned frequencies or the frequencies on which other carriers operate. Repeaters, bi-directional amplifiers and similar radio frequency enhancements (each, a “device”) deployed on your premises may negatively impact AT&T’s network or the networks of other carriers or FCC licensees. In order to comply with this FCC requirement, AT&T must control the devices utilized on its network and must be able to access any devices operating on AT&T’s spectrum or within AT&T’s network on a twenty-four (24) hours per day, seven (7) days per week basis in order to ensure that the devices are not interfering with AT&T’s network or the networks of other carriers or FCC licensees. Accordingly, any entity that installs a device within AT&T’s network that transmits AT&T’s frequencies must first obtain AT&T’s consent to deploy such device and must provide AT&T with twenty- four (24) hour a day, seven (7) day a week access to, and contact information for, any such device. AT&T will, of course, work with our customers by providing appropriate notice when access is needed. Notwithstanding the foregoing, in order to prevent harmful interference, AT&T retains the right to shut down, without advance notice, any device operated within AT&T’s network that causes harmful interference to AT&T’s own network, customers or users, or any other licensee’s network, customers or users. There may be other federal, state or local legal requirements and guidelines with which you have to comply in order to install or deploy such devices. As these become applicable, we will attempt to advise you of their impact. In order for you and AT&T to comply with the foregoing, any device and related electronics, antennas, cabling and other equipment installed on your premises (collectively, the “System”) must meet the requirements set forth below. You are authorized to deploy a System only if you comply with the following requirements: (a) The device used in the System must be approved by AT&T. Please consult with your AT&T In-building Solutions Consultant to obtain a list of approved devices and vendors. (b) The System may only be installed by an AT&T-approved contractor. Please consult with your AT&T In-Building Solutions Consultant to obtain a list of approved contractors. (c) You cannot install the System without AT&T’s prior approval of the component equipment and system design. AT&T has absolute discretion to determine whether to approve the installation of any System. Thus, the system design (detailing the device and any associated signal distribution system and other equipment) must be presented to AT&T through your AT&T project manager for approval. AT&T reserves the right to reject any system design without qualification. Permission to activate the System as designed is contingent upon such specific written approval from AT&T and shall not occur otherwise. (d) You are responsible for any costs associated with the initial device qualification process, the approval of the System, and the installation and maintenance of the System. (e) You may need to make modifications to your System in the future in order to maintain satisfactory performance, due to changes made by AT&T on its network or due to harmful interference being caused to AT&T’s network or the network of any other FCC licensee, and any such modifications will be at your sole expense. In addition to complying with the foregoing requirements, you must provide AT&T with the information set forth below and immediately notify AT&T in writing if any of the information changes. • The specific location of the System, including the street address and description in building. • The anticipated number of users. • The effective “on-air” date/installation date. • Upon installation of the System, a copy of the “as built” information. • The name(s) and phone number(s) of the person(s) who can be contacted by AT&T or its subcontractors twenty-four (24) hours per day, seven (7) days per week to provide prompt access to the System as needed, twenty-four (24) hour per day, seven (7) days per week. If you are in agreement with the foregoing, please sign below where indicated and then send the signed original, along with all of the required information specified above, to: AT&T Mobility National Accounts LLC Attn: EBS Mobility Contract Management P.O. Box 97061 Redmond, WA 98052 Please do not hesitate to contact Brian Baxter at 248-229-0568 if you have any questions. Very truly yours, Brian Baxter AT&T Mobility National Accounts LLC

External Photos

External Photos

SGS-CSTC Standards Technical Services Co., Ltd. Application No.: GZEM1405002259RF Page: 1 of 7 FCC ID: PX8HRU-4300 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radia frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/500 30 1500-100000 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density SGS-CSTC Standards Technical Services Co., Ltd. Application No.: GZEM1405002259RF Page: 2 of 7 FCC ID: PX8HRU-4300 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2. MPE Calculation Method S (mW/cm 2 )=P*G/4Pi*R 2 S= Power Density (mW/cm 2 ) P=Peak RF conducted output Power (mW) G=EUT Antenna numeric gain (numeric) R= Separation distance between radiator and human body (cm); R= SPiGP*4/)*( From the maximum EUT RF output power, as well as the gain of the used antenna, according to the RF power density limit above, the minimum distance between the antenna and human body will be calculated. 3. Calculated Result 3.1 For downlink: 728MHz to 746MHz LTE: Frequency (MHz) F Maximum Antenna Gain (dBi) Maximum Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Limit of Power Density (S) (mW/cm 2 ) Minimum Distance to human body (cm) Lowest 10 10 33.7 2344.229 1.461 35.75 Middle 10 10 32.8 1905.461 1.474 32.08 Highest 10 10 33.6 2290.868 1.487 35.02 3.2 For uplink: 698MHz to 716MHz LTE: Frequency (MHz) F Maximum Antenna Gain (dBi) Maximum Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Limit of Power Density (S) (mW/cm 2 ) Minimum Distance to human body (cm) Lowest 10 10 16.9 48.9779 1.411 5.26 Middle 10 10 17.1 51.2861 1.414 5.37 Highest 10 10 17.0 50.1187 1.417 5.30 SGS-CSTC Standards Technical Services Co., Ltd. Application No.: GZEM1405002259RF Page: 3 of 7 FCC ID: PX8HRU-4300 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM131100566801 Page: 1 of 149 FCC ID: PX8MBDA-200 Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1311005668RF Applicant: Comba Telecom Ltd. FCC ID: PX8MBDA-200 Product Name: mBDA Band Selective Wireless Repeater Model No.: mBDA-200 Trade Mark: Comba Standards: FCC Part 22,FCC Part 24,FCC Part 2 Date of Receipt: 2013-12-11 Date of Test: 2013-12-11 to 2013-12-16 Date of Issue: 2013-12-20 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM131100566801 Page: 2 of 149 FCC ID: PX8MBDA-200 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2013-12-20 Original Authorized for issue by: Tested By 2013-12-11 to 2013-12-16 (Daniel Hew) /Project Engineer Date Prepared By 2013-12-20 (Daniel Hew) /Clerk Date Checked By 2013-12-20 (Jeffrey Chen) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM131100566801 Page: 3 of 149 FCC ID: PX8MBDA-200 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Item Test Requirement Test Method Result Output Power FCC part 22.913 FCC part 24.232 FCC part 2.1046 KDB935210 D02 PASS Conducted Spurious Emissions FCC part 22.917 FCC part 24.238 FCC part 2.1051 KDB935210 D02 PASS Band Edge& Intermodulation FCC part 22.917 FCC part 24.238 FCC part 2.1051 KDB935210 D02 PASS Radiated Spurious Emissions FCC part 22.917 FC…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 Report No.: GZEM140700341203 Page: 1 of 214 FCC ID: PX8MBDA-200S Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1407003412RF Applicant: Comba Telecom Ltd. FCC ID: PX8MBDA-200S Product Name: mBDA Band Selective Wireless Repeater Model No.: mBDA-200S Trade Mark: Comba Standards: FCC Part 22, FCC Part 24, FCC Part 27, FCC Part 2 Date of Receipt: 2014-07-08 Date of Test: 2014-07-09 to 2014-08-31 Date of Issue: 2014-10-30 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. This report GZEM140700341203 supersedes the previous report GZEM140700341201, issued on 2014-09-01 which is hereby deemed null and void. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700341203 Page: 2 of 214 FCC ID: PX8MBDA-200S This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-09-01 Original (null) 01 2014-10-30 Adding test information for RF Output power. Authorized for issue by: Tested By 2014-07-09 to 2014-08-31 (Fred Zhu) /Project Engineer Date Prepared By 2014-10-30 (Fred Zhu) /Clerk Date Checked By 2014-10-30 (Jerry Chen) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700341203 Page: 3 of 214 FCC ID: PX8MBDA-200S This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Item Test Requirement Test Method Result Output Power FCC part 22.913 FCC part 24.232 FCC part 27.50 FCC part 2.1046 2-11-04/EAB/RF PASS Conducted Spurious Emission…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700341203 Page: 81 of 214 FCC ID: PX8MBDA-200S This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not …

Text truncated - open the document above for the full version.