PX8RD-8132RD8132 CDMA Repeater

USER MANUAL FOR RD-8132 RD-8132 QI Copyright - refer to title page Page 1 ENU Status : 1-0-0 RD-8132 CDMA REPEATER USER MANUAL The information contained herein is the responsibility of and is approved by the following, to whom all enquiries should be directed in the first instance: Comba Telecom Ltd This is an unpublished work the copyright in which vests in Comba International ("Comba"). All rights reserved. The information contained herein is confidential and the property of Comba and is supplied without liability for errors or omissions. No part may be reproduced, disclosed or used except as authorised by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied. USER MANUAL FOR RD-8132 RD-8132 QI Copyright - refer to title page Page 2 ENU Status : 1-0-0 0.2 CONTENTS Section Page 0.2 CONTENTS ...........................................................................................................................2 0.3 INDEX TO FIGURES .............................................................................................................3 0.4 ISSUE CONTROL..................................................................................................................3 0.5 SAFETY NOTICES AND ADMONISHMENTS ......................................................................5 1 EQUIPMENT DESCRIPTION ................................................................................................6 1.1 BLOCK DIAGRAM .................................................................................................................6 1.2 EQUIPMENT CONSTITUTION .............................................................................................7 1.2.1 EQUIPMENT ENCLOSURE LAYOUT...................................................................................7 1.2.2 EQUIPMENT INTERNAL LAYOUT .......................................................................................7 2 INSTALLATION .....................................................................................................................9 2.1 INSTALLLATION CHECKLIST AND PREPARATION ..........................................................9 2.1.1 REPEATER INSTALLATION CHECKLIST............................................................................9 2.1.2 ANTENNA INSTALLATION CHECKLIST..............................................................................9 2.1.3 PREPARATIONS ...................................................................................................................9 2.2 ELECTRICAL INSTALLATION ............................................................................................10 2.2.1 GROUNDING CONNECTION .............................................................................................11 2.2.2 POWER CONNECTION......................................................................................................11 2.2.3 RF CABLE CONNECTION ..................................................................................................11 2.2.4 LI-ION BATTERY CONNECTION .......................................................................................11 2.2.5 OMT CONNECTION............................................................................................................12 2.2.6 EXTERNAL ALARM CONNECTION ...................................................................................12 2.2.7 DRIP-LOOP .........................................................................................................................12 2.2.8 REMOTE CONNETION OF OMT USING WIRELESS MODEM.........................................12 3 OMT .....................................................................................................................................14 3.1 LOCAL AND REMOTE CONNECTIONS TO OMT .............................................................14 3.1.1 LOCAL CONNECTION TO OMT .........................................................................................14 3.1.2 REMOTE CONNECTION TO OMT .....................................................................................15 3.2 OMT CONFIGURATION......................................................................................................15 3.3 RF PARAMETER .................................................................................................................16 3.3.1 SWITCH ...............................................................................................................................16 3.3.2 CHANNEL NO. ....................................................................................................................16 3.3.3 ATT ......................................................................................................................................17 3.3.4 ALARM THRESHOLD.........................................................................................................17 3.3.5 ALARM INFORMATION ......................................................................................................18 3.4 PROPERTIES INFO. ...........................................................................................................20 3.4.1 EQUIPMENT ID ...................................................................................................................20 3.4.2 COMM. CONFIG..................................................................................................................21 4 COMMISSIONING ...............................................................................................................22 4.1 PRE-COMMISSIONING TASKS .........................................................................................22 4.2 MCU LED INDICATOR AND RESET BUTTON ..................................................................22 4.3 COMMISSIONING PROCEDURE ........................................…

Text truncated - open the document above for the full version.

AUTHORIZATION LETTER To: Federal Communications Commission 7435 Oaklanf Mills Road Columbia, MD 21046 To whom it may concern: FCC ID: PX8RD-8132 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf, as our agent, in the following matters related to the FCC approval of our product: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by SGS within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, John Cheng Director of Product Marketing 8 Feb 2010 Application: Comba Telecom Limited Tel : +852 21166082 Fax: +852 21166055 Email:[email protected]

DATE Feb 8th, 2010 Equipment Authorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: PX8RD-8132 Product Name: RD8132 CDMA Repeater Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operational description • Part List These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 8 Day of 2 20 10 By: John Cheng Signature Printed Title: Director of Product Marketing On behalf of : Comba Telecom Ltd. Telephone: +852 21166082

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 March 30, 2010 TO: Federal Communications Commission RE: Post grant STC At the client's request we placed the internal photos in STC status after grant - the appropriate letter is on file. Thank you. Marianne Bosley American TCB Inc. Direct 717-676-3203

FCC ID: PX8RD-8132 EXTERNAL PHOTOS FCC ID: PX8RD-8132 EXTERNAL PHOTOS

SGS-CSTC Standards Technical Services Co., Ltd. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: PX8RD-8132 RF Exposure Compliance Requirement 1. Standard requirement Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radia frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (a) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)(mW/cm 2 ) Averaging Times ׀E׀ 2 ׀ ,H׀ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/500 30 1500-100000 1.0 30 Note: f=frequency in MHz; *Plane-wave equivalent power density SGS-CSTC Standards Technical Services Co., Ltd. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2. MPE Calculation Method S (mW/cm 2 )=P*G/4Pi*R 2 S= Power Density (mW/cm 2 ) P=Peak RF conducted output Power (mW) G=EUT Antenna numeric gain (numeric) R= Separation distance between radiator and human body (cm); R= SPiGP*4/)*( From the maximum EUT RF output power, as well as the gain of the used antenna, according to the RF power density limit above, the minimum distance between the antenna and human body will be calculated. 3. Calculated Result For downlink: Frequency (MHz) F Maximum Antenna Gain (dBi) Maximum Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Limit of Power Density (S) (mW/cm 2 ) Minimum Distance to human body (cm) 881.5 21 125 42.7 17800 F/300 246 881.5 21 125 42.7 17800 F/500 317 For uplink: Frequency (MHz) F Maximum Antenna Gain (dBi) Maximum Antenna Gain (Numeric) Peak Output Power (dBm) Peak Output Power (mW) Limit of Power Density (S) (mW/cm 2 ) Minimum Distance to human body (cm) 837.5 21 125 24.7 300 F/300 32.7 837.5 21 125 24.7 300 F/500 42.5 Conclusion: So the recommend use distance away from EUT external antenna is larger than 3.17 meter.

Report No.: GLEMO1001005801 Page: 1 of 113 FCC ID :PX8RD-8132 Authorized Signature: Stephen Guo Lab Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only SGS-CSTC Standards Technical Services Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 TEST REPORT Application No.: GLEMO10010058RF Applicant: Comba Telecom Limited FCC ID: PX8RD-8132 Downlink: 869MHz to 894MHz Frequency Band: Uplink: 824MHz to 849MHz Equipment under Test (EUT) Name: RD8132 CDMA Repeater Model No: RD-8132 (43); RD-8132 (40); RD-8132 (37); RD-8132 (33); RD-8132 (30); RD- 8132 (27); RD-8132 (23); RD-8132 (19) ♣ ♣ Please refer to section 3 of this report which indicates which item was actually tested and which were electrically identical. Standards: FCC part 22H, Date of Test: 05 January to 21 January 2010 Date of Issue: 28 January 2010 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMO1001005801 Page: 2 of 113 FCC ID:PX8RD-8132 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htmand, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Version No. Date Description 01 12 January 2010 Original 02 28 January 2010 Add Multi-type test for the identical system (The original type is RD-8132 (43) ) Prepared By: Jeffrey Chen Date 26 January 2010 Project Engineer Check By: Strong Yao Date 28 January 2010 Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMO1001005801 Page: 3 of 113 FCC ID:PX8RD-8132 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htmand, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Item Test Requirement Test Method Result Output Po…

Text truncated - open the document above for the full version.

FCC ID: PX8RD-8132 test setup photos Test Setup photos 30MHz ~ 1GHz Radiated Emission FCC ID: PX8RD-8132 test setup photos Above 1GHz Radiated Emission