PY7-38431PGSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, NFC and GNSS

XXXXX Cautions on using the product Be sure to read this manual before use •In this manual, "Xperia XX XX" is usually referred to as "the product" or "main unit". •In this manual, "Quick Start Guide", "Cautions on using the product" (this manual) and " (Full instruction manual)" (Japanese) are collectively referred to as "Instruction Manual". •Descriptions in this manual are based on Android™ 12. •In this manual, "microSD™ memory card (commercially available)", "microSDHC™ memory card (commercially available)" and "microSDXC™ memory card (commercially available)" are abbreviated as "microSD memory card". •Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies. The TM and ® marks may be omitted in this manual. Follow the instructions of a gas station or other such location before using the product there. Do not charge the product at a gas station, etc. Take care not to drop the product at a gas station, etc.; in particular, do not use the product while filling. Ignition of flammable gas might cause explosion, fire, etc. If you notice anything unusual about the equipment such as an unusual odor, abnormal noise, smoke generation, overheating, discoloration or deformation during operation, charging or storage, perform the following measures carefully. •Remove the power plug from an outlet •Turn off the power of the product Failure to do so might cause fire, burns, injury, electric shock, etc. Caution Be sure to read the following cautions before use. Do not use damaged product or peripheral devices. Doing so might cause fire, burns, injury, etc. Do not place the product on an unstable or inclined platform. Be careful especially when vibrator is set. The product might fall and cause injury etc. Do not use or keep in a place that is very humid, dusty, or subject to high temperature. Doing so might cause fire, burns, electric shock, etc. For waterproofness/dustproofness, refer to "Notes on waterproof and dustproof properties" (P. 26). If children use the product, parents or guardians should give them proper instructions and do not allow them to use the product in the wrong way. Use of the product in the wrong way might cause accidental ingestion, injury, electric shock, etc. Never connect the USB Type-C plug to the product or the specified charging equipment (sold separately) when it is wet. Although the product has the waterproof property, inserting USB Type-C plug to the product when it is wet might cause electric shock or short-circuit due to the moisture or foreign substance on the product or USB Type-C plug, or might cause abnormal overheating, fire damage, fire, burns, or a fault if corrosion occurs. Do not touch the cable, charging terminals or power plug of the specified charging equipment (sold separately) with wet hands. Doing so might cause fire, burns, electric shock, etc. Use the adapter only on the specified power supply and voltage. When charging the battery overseas, use AC adapter that can be used overseas (sold separately). Using the incorrect power supply and voltage might cause fire, burns, electric shock, etc. AC adapter (sold separately): 100V AC (Connect to the AC outlet for internal household use) AC adapter (sold separately) that can be used overseas: 100V AC to 240V AC (Connect to the AC outlet for internal household use) Clean dust from the power plug. Using it with dust adhered might cause fire, burns, electric shock, etc. Firmly insert the specified charging equipment (sold separately) into an outlet. Insecure inserting might cause fire, burns, electric shock, etc. When you disconnect a power plug of the specified charging equipment (sold separately) from an outlet, do not apply excessive force to it such as pulling the cable. Instead, hold the adapter main unit to disconnect. Pulling the cable of the specified charging equipment (sold separately) might damage the cable causing fire, burns, electric shock, etc. When plugging/unplugging the specified charging equipment (sold separately) into/from the product, plug/unplug it straight toward the product without applying excessive force such as pulling the cable. Incorrect plugging/unplugging might cause fire, burns, injury, electric shock, etc. When using the product Before you start using the product, make sure to read the "Safety Precautions" to ensure correct use. Before you assume that the product is malfunctioning, refer to " (Check here first)" in " (Full Instruction Manual)" (Japanese). •Communication is not possible even inside of the service area in places where the signal does not reach (e.g. tunnels and basements). Also, communication is sometimes not possible in poor signal reception areas. Communication is sometimes interrupted if you move into poor signal reception area during communication. •Since the product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (Though 5G/LTE/WiMAX 2+/ GSM/UMTS system has highly secure confidential communication features.) •For connecting to the emergency call acceptance organization, VoLTE (LTE network) is used. 3G (Line exchange network) connection is not available. • Since the product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law. •The IMEI information of your mobile phone is automatically sent to your carrier for maintenance and monitoring operational status of your mobile phone. •Before you start using the product overseas, check the relevant laws and regulations of the country/region you visit. •The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as well as fires, actions by third parties, other accidents, intentional, mistaken, or incorrect use by the customer, or use under other unusual conditions outside the responsibility of the Company. •The Company is not liable for any incidental dama…

Text truncated - open the document above for the full version.

Sony Corporation CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: February 10, 2023 Grantee Code: PY7 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Sony Corporation (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Mr. Mark Arthurs FRN 0033408097 Sony Electronics Inc. 16535 Via Esprillo San Diego California, 92127 [email protected] Sincerely yours, Mika Kaneko Chief Regulatory Compliance Manager Sony Corporation

Sony Corporation CFR 47 §2.903 and §2.911(d)(5) Attestation Date: February 10, 2023 FCC ID: PY7-38431P To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Sony Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Sony Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Mika Kaneko Chief Regulatory Compliance Manager Sony Corporation

Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Date: February 27, 2023 SGS-CSTC Standards Technical Services Suzhou Co., Ltd. South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China, 215000 (Jiangsu) Pilot Free Trade Zone Authorization Letter for SGS FCC ID:PY7-38431P To Whom It May Concern: I, the undersigned, hereby authorize SGS to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Mobile Communications Business Group Sony Corporation

Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Date: March 10, 2023 PY7-38431P Data Reuse Justification and Summary To Whom It May Concern: We are applying data reuse for FCC ID PY7-38431P (Variant) of DXX, DSS, DTS, and NII equipment codes based on the reference FCC ID PY7-51629L(Parent). FCC ID PY7-38431P is the variant from FCC ID PY7-51629L. They have the same dimension and share the same PCB layout, antennas and components in WLAN and Bluetooth. Though both devices use different names for the NFC chipset, this difference is the payment management software installed on the secure microcomputer and there is no difference in electrical and RF performance for NFC. The above unlicensed band data for the parent model remain representative for the variant model (equipment classes DSS, DTS, NII and DXX) and test reports for the parent model plus test reports with the spot check data for the variant model have been submitted. The power to be listed on the F-731 and FCC grants for these bands are the values detailed in the parent report as the spot check data shows all values within expected tolerances of the parent model. FCC ID 802.11 DTS Bluetooth DTS Bluetooth DSS 802.11 NII NFC DXX PY7-51629L Parent SEWM221200 0308RG04 SEWM221200 0308RG03 SEWM221200 0308RG02 SEWM221200 0308RG05 SEWM221200 0308RG07 PY7-38431P Variant SEWM221200 0310RG04 SEWM221200 0310RG03 SEWM221200 0310RG02 SEWM221200 0310RG05 SEWM221200 0310RG07 Indicates full set of test data. Values in this report to be listed on the grant for these bands. Partial test data used to confirm that parent model data is representative for the variant model. Data for these bands is for reference only DFS and SAR have been fully tested on the variant model. We confirm that the test data reuse policy of FCC KDB 484596 D01 Referencing Test Data v01 has been followed and take full responsibility that the test data as referenced from the parent model report represents compliance for the new FCC ID. Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Mobile Communications Business Group Sony Corporation

External Photos FCC-ID :PY7-38431P

Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan 1 E-Label and Label Location PY7-38431P E- Label Location Users can access the FCC ID information within 3 step as the followings. Setting from Main Menu Settings -> About Phone -> Certificates 2 Access to the required information on the e-label (1)The user manual directs the user where to find the FCC ID E-Label. To view the regulatory compliance mark Find and tap [Settings]->[About Phone]->[Certificates] Regulatory compliance mark such as FCC ID is displayed on the screen. Special codes or permissions are not required the above steps beyond the normal security protection to unlock the screen. (2)Produc ts must not require special accessories or supplemental plug-ins. (3)The regulatory information is clearly legible without the aid of magnification. (4)The regulatory information is secure. The user can not access and modify the regulatory information. (5)The physical temporary label or the label on the packaging for purchasing and importation is attached in case of the device is sold in the United States. 3 FCC Statement FCC15.19(a) statement can be seen in the manual.