PY7-PM0910GSM/WCDMA/LTE Phone + Bluetooth, DTS/UNII a/b/g/n/ac, ANT+, & NFC

Important Information United States THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The SO-02H Series mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the important information chapter in the User Guide. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is W/kg*, and when worn on the body is W/ kg*. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines. Please use an accessory designated for this product or an accessory which contains no metal and which positions the handset a minimum of 15 mm from the body. For devices which include “WiFi hotspot” functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm. Use of third-party accessories may result in different SAR levels than those reported. Radio Wave Exposure and Specific Absorption Rate (SAR) Information :NJ  : 62+ ** Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http:// transition.fcc.gov/oet/ea/fccid/ after searching on FCCID PY7-PM0882. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at http://www.emfexplained.info/. *In the United States, the SAR limit for mobile phones used by the public is 1.6 watts/ kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements. **This paragraph is only applicable to authorities and customers in the United States. 3<30 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Statement for the USA (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

INSTRUCTION MANUAL 03H Introduction Thank you for your purchase of "SO-03H". For proper use of the SO-03H, read this manual carefully before and while you use the SO-03H. About manuals of SO-03H In addition to this manual, the operations of SO-03H are described in " (Quick Start Guide)" (in Japanese only) and "Instruction Manual" application of the terminal (in Japanese only). " (Quick Start Guide)" (Supplied accessories) The initial operations and settings after purchasing the terminal, screen view contents and operations of main function are explained. "Instruction Manual" (Application of the terminal) Operations and settings of each function are explained. To use "Instruction Manual" application, from the Home screen, u [Instruction Manual]. When using for the first time, download and install the application according to the onscreen instructions. If you uninstall "Instruction Manual" application, access to Google Play from Play Store to download it again. From the Home screen, tap [Play Store], search " (Instruction Manual)" application to select, then install it following the onscreen instructions. You can use the application as an electronic book. You can also shift to actual operations by tapping the description in the contents or view reference contents. "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html * You can download the latest information of " (Quick Start Guide)". The URL and contents are subject to change without prior notice. ❖ Note Reproduction or reprint of all or part of this manual without prior permission is prohibited. Important information for SO-03H is posted in the following website. Be sure to check before using. http://www.sonymobile.co.jp/support/use_support/ product/so-03h/ (In Japanese only) 1 Operation descriptions In this manual, each key (key icon) operation is described with P , k , b , h , n . And selection operations of the icons or function items on the touch screen are described as follows. ❖ Information Display examples and illustrations used in this manual are just images for explanations and may be different from actual ones. In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures. Please note that "SO-03H" is called "the terminal" in this manual. In this manual, explanations for "docomo LIVE UX" as Home application are provided (P.60). In this manual, the instructions are described with the default Home screen. If you set the other application to the home screen, the operations may differ from the descriptions. DescriptionOperation From the Home screen, u [Settings] u [About phone]. From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Touch and hold an icon. Keep touching an icon longer (1- 2 seconds). 2 SO-03H (with warranty) (Quick Start Guide) (In Japanese only) SO-03H (Notes on usage Safety/Handling precautions) (In Japanese only) TV/Mobacas antenna cable SO02 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/product/ option/ (In Japanese only) Supplied accessories Contents/Precautions 3 Contents Supplied accessories. . . . . . . . . . . . . . . . . 2 About using the terminal . . . . . . . . . . . . 5 Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Handling precautions . . . . . . . . . . . . . . . 16 Waterproofness/Dustproofness . . . . . 22 Before Using the Terminal . . . 27 Part names and functions................................................ 27 docomo nano UIM card.................................................... 28 CE mark and FCC ID............................................................. 30 Charging ..................................................................................... 31 Turning power on/off......................................................... 36 Initial settings........................................................................... 37 Basic operations ..................................................................... 38 Notification LED ..................................................................... 42 Status bar ................................................................................... 42 Notification panel ................................................................. 45 Quick settings panel............................................................ 45 Home screen............................................................................ 46 Xperia ™ Application screen .......................................... 52 Task manager........................................................................... 59 Switching Home application ......................................... 60 Searching information in the terminal and web pages ............................................................................................ 61 Character entry ....................................................................... 61 Setting character entry ...................................................... 67 docomo LIVE UX . . . . . . . . . . . . 68 Home screen............................................................................ 68 Managing the Home screen .......................................... 68 Application screen................................................................ 70 Display all apps....................................................................... 72 Backing up and restoring the Home screen ........ 72 Using My Magazine ............................................................. 73 Checking Home application information.............. 74 Phone . . . . . . . . . . . . . . . . . . . . . . 75 Making/Receiving a call ...............…

Text truncated - open the document above for the full version.

Sony Mobile Communications Company Internal LETTER 1(2) Document number Revision 54/0061-LXE 110 1480 Uen A Prepared by Date SEM/CGQKACD DAN 3 LI 2015-09-10 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by SEM/CGQKACD (YUSHENG WU) It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; Company Internal LETTER 2(2) Document number Revision 54/0061-LXE 110 1480 Uen A f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Yours sincerely Yusheng Wu () Manager Global Type Approval China Sony Mobile Communications (China) Co., Ltd

Sony Mobile Communications Company Internal LETTER 1(2) Document number Revision 55/0061-LXE 110 1480 Uen A Prepared by Date SEM/CGQKACD DAN 3 LI 2015-09-10 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by SEM/CGQKACD (YUSHENG WU) It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY7-PM0910 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. - Schematic Diagram - Block Diagram - Theory of Operation - Antenna Specification - Parts List - Tune up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization. - External Photos - Internal Photos - Test Setup Photos - User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential Company Internal LETTER 2(2) Document number Revision 55/0061-LXE 110 1480 Uen A documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely Yusheng Wu Manager Global Type Approval China Sony Mobile Communications (China) Co., Ltd

Sony Mobile Communications Company Internal REPORT 1(2) Document number Revision 14/0360-1/FCP 119 1495/4 Uen PA1 Prepared by Date 2014-08-29 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA FCC ID: PY7-PM0910: External Photo Front: Rear: Sony Mobile Communications Company Internal REPORT 2(2) Document number Revision 14/0360-1/FCP 119 1495/4 Uen PA1 Prepared by Date 2014-08-29 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA Side view: Top/Bottom view:

Sony Mobile Communications Confidential WORK DESCRIPTION 1(1) Document number Revision A Pr epared by Date Takashi Okada (22715996) 2015-07-21 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Label and Label Location FCC ID: PY7-PM0910 FCC ID: PY7-PM0910 Back side of ETU

Sony Mobile Communications Confidential REPORT 1(4) Document number Revision PA3 Prepared by Date 2014-08-27 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA FCC ID: PY7-PM0910: External Photo Without Rear Panel Rear Panel Sony Mobile Communications Confidential REPORT 2(4) Document number Revision PA3 Prepared by Date 2014-08-27 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA With PWB Without PWB Internal PWB with/without Shield cases – Front (LCD)-side: Internal PWB with Shield cases (Front-side) Sony Mobile Communications Confidential REPORT 3(4) Document number Revision PA3 Prepared by Date 2014-08-27 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA Internal PWB without Shield cases (Front-side) Internal PWB with Shield cases (Rear-side) Internal PWB without Shield cases (Rear-side) Sony Mobile Communications Confidential REPORT 4(4) Document number Revision PA3 Prepared by Date 2014-08-27 Contents responsible if other than preparer Remarks Approved by SEM/CGVOHCA AKINORI YAMADA Battery:

SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 / FAX : 886-3-328-4978 Issued Date : Sep. 25, 2015 FCC ID : PY7-PM0910 Page 1 of 61 Form version. : 150415 FCC SAR Test Report Report No. : FA571620 FCC SAR Test Report APPLICANT : Sony Mobile Communications Inc. BRAND NAME : Sony FCC ID : PY7-PM0910 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2013 We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and had been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. No.52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Taoyuan City, Taiwan (R.O.C.) Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 / FAX : 886-3-328-4978 Issued Date : Sep. 25, 2015 FCC ID : PY7-PM0910 Page 2 of 61 Form version. : 150415 FCC SAR Test Report Report No. : FA571620 Table of Contents 1. Attestation of Test Results ........................................................................................................................................... 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Standard ....................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 Wireless Technologies ........................................................................................................................................... 6 4.2 Device Serial Number ............................................................................................................................................ 6 4.3 Maximum Tune-up Limit ......................................................................................................................................... 7 5. RF Exposure Limits....................................................................................................................................................... 9 5.1 Uncontrolled Environment ...................................................................................................................................... 9 5.2 Controlled Environment .......................................................................................................................................... 9 6. Specific Absorption Rate (SAR) ..................................................................................................................................10 6.1 Introduction ...........................................................................................................................................................10 6.2 SAR Definition .......................................................................................................................................................10 7. System Description and Setup ...................................................................................................................................11 8. Measurement Procedures ...........................................................................................................................................12 8.1 Spatial Peak SAR Evaluation ................................................................................................................................12 8.2 Power Reference Measurement............................................................................................................................13 8.3 Area Scan .............................................................................................................................................................13 8.4 Zoom Scan ............................................................................................................................................................14 8.5 Volume Scan Procedures ......................................................................................................................................14 8.6 Power Drift Monitoring ...........................................................................................................................................14 9. Test Equipment List .....................................................................................................................................................15 10. System Verification ....................................................................................................................................................16 10.1 Tissue Verification ...............................................................................................................................................16 10.2 System Performance Check Results ...................................................................................................................18 11. RF Exposure Positions ..............................................................................................................................................20 11.1 Ear and handset reference point .........................................................................................................................20 11.2 Definition of the cheek position ............................................................................................................................21 11.3 Definition of the tilt position....................................................................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2015/9/4 System Check_Head_750MHz_150904 DUT: D750V3-1012 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_150904 Medium parameters used: f = 750 MHz; σ = 0.893 S/m; ε r = 42.633; ρ = 1000 kg/m 3 23.5 22.5 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(10.93, 10.93, 10.93); Calibrated: 2014/11/21; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2015/7/21 - Phantom: SAM_Right; Type: QD000P40CC; Serial: TP:1383 - Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.48 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 51.76 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.83 W/kg SAR(1 g) = 2 W/kg; SAR(10 g) = 1.36 W/kg Maximum value of SAR (measured) = 2.47 W/kg 0 dB = 2.47 W/kg = 3.93 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2015/9/4 System Check_Body_750MHz_150904 DUT: D750V3-1012 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: MSL_750_150904 Medium parameters used: f = 750 MHz; σ = 0.97 S/m; ε r = 54.646; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(10.07, 10.07, 10.07); Calibrated: 2014/11/21; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2015/7/21 - Phantom: SAM_Right; Type: QD000P40CC; Serial: TP:1383 - Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.75 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.89 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 3.07 W/kg SAR(1 g) = 2.07 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.73 W/kg 0 dB = 2.73 W/kg = 4.36 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2015/9/4 System Check_Head_835MHz_150904 DUT: D835V2-499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL_850_150904 Medium parameters used: f = 835 MHz; σ = 0.899 S/m; ε r = 43.004; ρ = 1000 kg/m 3 23.5 22.5 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(10.33, 10.33, 10.33); Calibrated: 2014/11/21; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2015/7/21 - Phantom: SAM_Right; Type: QD000P40CC; Serial: TP:1383 - Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.98 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 58.09 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 3.56 W/kg SAR(1 g) = 2.35 W/kg; SAR(10 g) = 1.54 W/kg Maximum value of SAR (measured) = 2.99 W/kg 0 dB = 2.99 W/kg = 4.76 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2015/9/4 System Check_Body_835MHz_150904 DUT: D835V2-499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_150904 Medium parameters used: f = 835 MHz; σ = 0.981 S/m; ε r = 55.337; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(10.01, 10.01, 10.01); Calibrated: 2014/11/21; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2015/7/21 - Phantom: SAM_Right; Type: QD000P40CC; Serial: TP:1383 - Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.22 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 58.36 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.64 W/kg SAR(1 g) = 2.48 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 3.14 W/kg 0 dB = 3.14 W/kg = 4.97 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2015/9/4 System Check_Head_1900MHz_150904 DUT: D1900V2-5d041 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL1900_150904 Medium parameters used: f = 1900 MHz; σ = 1.428 S/m; ε r = 40.987; ρ = 1000 kg/m 3 23.2 22.2 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(8.1, 8.1, 8.1); Calibrated: 2014/11/21; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1279; Calibrated: 2015/7/21 - Phantom: SAM_Right; Type: QD000P40CC; Serial: TP:1383 - Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.7 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 106.0 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 17.2 W/kg SAR(1 g) = 9.24 W/kg; SAR(10 g) = 4.74 W/kg Maximum value of SAR (measured) = 14.1 W/kg 0 dB = 14.1 W/kg = 11.49 dBW/k…

Text truncated - open the document above for the full version.