PY76220501-BVTransmitter module for mobile applications

GM 47/GM 48 Technical Description CE The product described in this manual conforms to the Radio and Teleterminals directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. SAR statement: This product is intended to be used with the antenna or other radiating element 20 cm far away of the any part of the human body. The information contained in this document is the proprietary information of Sony Ericsson Mobile Communications. The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Sony Ericsson Mobile Communications, is strictly prohibited. Further, no portion of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written consent of Sony Ericsson Mobile Communications, the copyright holder. Second edition (February 2002) Sony Ericsson Mobile Communications. publishes this manual without making any warranty as to the content contained herein. Further Sony Ericsson Mobile Communications. reserves the right to make modifications, additions and deletions to this manual due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications., 2002 Publication number: Printed in UK Trademarks AIX is a trademark owned by International Business Machines Corporation GM47/48 Technical description BA/SEM/MS 02:0004 Rev B3 Contents 1INTRODUCTION...........................................................................................................5 1.1OVERVIEW...............................................................................................................5 1.2FEATURES................................................................................................................6 1.2.1Type of Mobile Station......................................................................................6 1.2.2SMS................................................................................................................7 1.2.3Voice calls.......................................................................................................7 1.2.4Data.................................................................................................................7 1.2.5SIM Card..........................................................................................................8 1.2.6Power consumption..........................................................................................8 1.2.7Other features..................................................................................................8 1.2.8Development Kit...............................................................................................8 1.3PRECAUTIONS...........................................................................................................9 1.4ABBREVIATIONS........................................................................................................9 2MECHANICAL DESCRIPTION.....................................................................................11 2.1INTERFACE DESCRIPTION..........................................................................................11 2.2PHYSICAL DIMENSIONS.............................................................................................12 3SYSTEM CONNECTOR INTERFACE...........................................................................13 3.1OVERVIEW.............................................................................................................13 3.2GENERAL ELECTRICAL AND LOGICAL CHARACTERISTICS................................................16 3.2.1General Protection Requirements....................................................................16 3.3GROUNDS..............................................................................................................16 3.3.1The Analogue Ground.....................................................................................17 3.3.2The Digital Ground (DGND).............................................................................17 3.4REGULATED POWER SUPPLY....................................................................................17 3.4.1Power Supply (VCC).......................................................................................18 3.5ON/OFF AND EXTERNAL POWER SIGNALS..................................................................18 3.5.1Module ON/OFF.............................................................................................18 3.5.2External 2.75 V (VIO)......................................................................................19 3.6ANALOGUE AUDIO...................................................................................................19 3.6.1Audio To Mobile Station (ATMS)......................................................................20 3.6.2Audio From Mobile Station (AFMS)..................................................................22 3.7MICROPHONE SIGNALS............................................................................................22 3.8SPEAKER SIGNALS..................................................................................................23 3.9DIGITAL AUDIO........................................................................................................23 3.10SERIAL DATA..........................................................................................................24 3.10.1UART 1 (RS232) - RD, TD, RTS, CTS, DTR, DCD and RI.................................26 3.10.2Serial Data Signals - RD, TD..............................…

Text truncated - open the document above for the full version.

GM 47/GM 48 Design Guidelines CE The product described in this manual conforms to the TTE directive 91/263/EEC and EMC directive 89/336/EEC. The product fulfils the requirements according to ETS 300 342-1. The information contained in this document is the proprietary information of Sony Ericsson Mobile Communications. The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Sony Ericsson Mobile Communications, is strictly prohibited. Further, no portion of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written consent of Sony Ericsson Mobile Communications, the copyright holder. First edition (January 2002) Sony Ericsson Mobile Communications. publishes this manual without making any warranty as to the content contained herein. Further Sony Ericsson Mobile Communications. reserves the right to make modifications, additions and deletions to this manual due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications., 2002 Publication number: Printed in UK Trademarks AIX is a trademark owned by International Business Machines Corporation GM47/48 Design Guidelines BA/SEM/MSC 02:0006 Rev PA13 Contents 1INTRODUCTION...........................................................................................................5 1.1OVERVIEW...............................................................................................................5 1.2PRECAUTIONS...........................................................................................................5 1.3ABBREVIATIONS........................................................................................................5 2MECHANICAL INTEGRATION.......................................................................................7 2.1PHYSICAL DIMENSIONS...............................................................................................7 3ELECTRICAL INTEGRATION........................................................................................8 3.1GENERAL.................................................................................................................8 3.2GROUNDING.............................................................................................................9 3.2.1The Analogue Ground.......................................................................................9 3.2.2The Digital Ground (DGND)...............................................................................9 3.3EXTERNAL SUPPLY TO MODULE.................................................................................10 3.3.1Power Supply (VCC).......................................................................................10 3.4GENERAL RECOMMENDATIONS..................................................................................11 3.5SIM CONNECTIONS..................................................................................................13 3.6AUDIO CONNECTIONS...............................................................................................14 3.6.1Analogue Audio..............................................................................................14 3.6.2Advanced Portable Hands Free Functionality...................................................15 3.7RF AND ANTENNA INTEGRATION.................................................................................16 3.8INTERFACING TO A 3.3V μPROCESSOR.......................................................................17 3.9SOFTWARE DOWNLOAD AND LOGGING CIRCUITRY.........................................................17 4DEVELOPERS BOARD...............................................................................................18 4.1POWER CIRCUIT......................................................................................................18 4.2SIM CIRCUIT..........................................................................................................18 5PART NUMBERS........................................................................................................20 5.1SYSTEM CONNECTOR...............................................................................................20 5.2RF CONNECTOR......................................................................................................20 5.3SIM CARD HOLDER..................................................................................................20 5.4SUPPLIERS.............................................................................................................20 5.4.1Imperial connectors........................................................................................20 5.4.2IMS connectors..............................................................................................21 6TYPE APPROVAL.......................................................................................................22 6.1DOCUMENTATION REQUIRED......................................................................................22 6.2POWER SUPPLY......................................................................................................22 6.3SIM TESTING..........................................................................................................23 6.4EMC/ESD & SAFETY..............................................................................................23 6.5RF TESTING...........................................................................................................23 6.5.1GM47......................................................…

Text truncated - open the document above for the full version.

Product Photo/Illustration GM47/GM48 The product described in this manual conforms to the TTE directive 91/263/EEC and EMC directive 89/336/EEC. The product fulfils the requirements according to ETS 300 342-1. SAR statement:This product is intended to be used with the antenna or other radiating element at least 20 cm away from any part of the human body. The information contained in this document is the proprietary information of Sony Ericsson Mobile Communications International.The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent ofSony Ericsson Mobile Communications International,is strictly prohibited. Further, no portion of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written consent ofSony Ericsson Mobile Communications International,the copyright holder. First edition (April 2002) Sony Ericsson Mobile Communications Internationalpublishes this manual without making any warranty as to the content contained herein. Further Sony Ericsson Mobile Communications Internationalreserves the right to make modifications, additions and deletions to this manual due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications International, 2002 Publication number: LZT 123 7263 R1A Printed in UK Trademarks AIXis a trademark owned by International Business Machines Corporation. 3 LZT 123 7263 R1A Contents Part 1: Overview ................................................................................................. 11 1.Introduction ............................................................................................................ 13 1.1Target Users......................................................................................... 13 1.2Prerequisites......................................................................................... 13 1.3Manual Structure ......................................................................................... 13 2.GM47/GM48 Modules ........................................................................................... 15 2.1About the GM47/GM48 Family .................................................................. 15 2.2GM47 in a Communication System ............................................................. 15 2.3Features......................................................................................... 17 2.3.1Types of Mobile Station .................................................................. 17 2.3.2Short Message Service .................................................................... 18 2.3.3Voice Calls ...................................................................................... 18 2.3.4Data................................................................................................. 18 2.3.5SIM Card......................................................................................... 19 2.3.6Average Power Consumption ......................................................... 19 2.3.7Other Features ................................................................................ 19 2.4Service and Support ..................................................................................... 19 2.4.1Web Pages....................................................................................... 19 2.4.2Integrator’s Manual ........................................................................ 19 2.4.3Developer’s Kit ............................................................................... 20 2.5Precautions......................................................................................... 20 3.Abbreviations ......................................................................................................... 21 Part 2: Developer’s Kit ....................................................................................... 23 1.Introduction ............................................................................................................ 25 1.1Overview......................................................................................... 25 1.2Contents of the Kit ....................................................................................... 25 1.3General Functioning of the Kit .................................................................... 26 2.Using the Developer’s Kit ...................................................................................... 29 2.1Start up Check List....................................................................................... 30 2.2Developer’s Board Overlay.......................................................................... 31 2.3Jumpers, Switches and Connectors .............................................................. 32 2.4System Connector Pin Assignments ............................................................ 36 Part 3: Integrating the Module............................................................................ 37 1.Mechanical Description ......................................................................................... 39 1.1Interface Description .................................................................................... 39 1.2Physical Dimensions .................................................................................... 40 GM47/GM48 INTEGRATOR’S MANUAL 4 LZT 123 7263 R1A 2.System Connector Interface ..................................................................................41 2.1Overview..........................................................................................…

Text truncated - open the document above for the full version.

GM47/48 Design Guidelines BA/SEM/MSC 02:0006 Rev PB124 6.6 SAR warning If the application is using an antenna which is less than 20cm away from the any part of the users body, integrators are legally obliged to publish SAR figures for the product. This testing would need to be carried out by the system integrator. The GM48 module is FCC approved for fixed and mobile applications. If the final product after integration is intended for portable use, a new application and FCC ID is required. Even if SAR measurements are not required it is considered good practice to insert a warning in any manual produced indicating it is a radio product and that care should be taken. 6.7 Other TA issues 6.7.1External Application software If the software of the external application is changed it has no effect upon the type approval certificate issued to it. 6.7.2GM47 software updates If the GM47 software is updated there should be no further action required by the system integrator as accessories lists are generally carried across between TA certificates and any software supplied by Sony Ericsson will be fully Type Approved.

Response to email 23032.doc Page 1 of 1 CETECOM Certification and Testing in Communications GmbH Im Teelbruch 122 45219 Essen Germany Phone: +49 (0) 2054 9519-0 Fax: +49 (0) 2054 9519-9 FCC ID: PY76220501-BV Applicant: Sony Ericsson Mobile Communications AB Correspondence Reference Nr.: 23032 Dated: 2002-05-30 731 Confirmation Number: EA423013 Answer to 1) The GSM Module operates in two Bands: GSM 1900 (1850MHz-1910MHz) and GSM850 (824 MHz – 849 MHz). Both frequency bands are operational on U.S. territories. Answer to 2) Please refer to the new uploaded document “Exhibit 8 Design Guidelines” page 23 and 24. Furthermore, Sony Ericsson will only commercialise the module with the antenna used for testing. In case their customer would use an antenna with a different gain than the gain of the antenna in the Sony Ericsson Kit, they will have to update via Class II Permissive Change this application. This information is however also stated in above mentioned document on page 23. Answer to 3) Please refer to the new uploaded document “Exhibit 11 MPE Evaluation” Answer to 4) Please refer to the “Exhibit 2 Intended Use”.

CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 91 (97) Photographs of the equipment CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 92 (97) Photographs of the equipment CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 93 (97) Photographs of the equipment

Limited Internal MARKING DRAWING 1 (3) Prepared (also subject responsible if other)No. BA/SEM/MD/V José A. Rodrigo151 86-KRD 102 436+ Uen ApprovedCheckedDateRevReference BA/SEM/MD/P (Hilary Brownlow)2002-02-01ELilium-Cecilia Marking Drawing Type 6220501-BV Label The label used for marking is defined in the Manufacturing Specification on the SVF 930 2159. Placing The label shall be placed on the back of the module according to the Assembly Drawing (151 88) for the KRD. Print layout Approval marks (1, 2, 3)Local Approval marksApproval marks (5) Approval marks (4)Approval marks (6) IMEI-numbers as barcode IMEI-numbers as characters Serial number as barcode * Serial number as characters Type numberG – H – Y 1 – Y 2 – Y 3 – field KRD numberR-stateRepair week Manufacturing countryProduction week Definitions Sony Ericsson trademarkSony Ericsson and the Sony Ericsson trademark shall be according to the corporate standard 190 89-EN/LZT 108 5347. Approval marks1. FCC approval marking: consists of the text: FCC ID: PY76220501-BV Within a frame with height > 1.5 mm. 2. This field shall be blank. Sony Ericsson trademark Limited Internal MARKING DRAWING 2 (3) Prepared (also subject responsible if other)No. BA/SEM/MD/V José A. Rodrigo151 86-KRD 102 436+ Uen ApprovedCheckedDateRevReference BA/SEM/MD/P (Hilary Brownlow)2002-02-01ELilium-Cecilia 3. This field shall be blank. 4. Canada approval marking: consists of text: CAN XXXXXXXXXX 5. This field shall be blank. 6. This field shall be blank. Local approval marksThis field shall be used for local approval marks in countries where special marking is required. IMEI number as bar codeSee below for definition of IMEI-number. The bar code shall only contain the digits of the IMEI number (no -). IMEI number as characters The IMEI number has format: TAC-FAC-SNR-CD TAC =Type Approval code after assignment from the Notified Body FAC =The corresponding Final Assembly Code of the factory used for the production (i.e. 69 for the Bilbao factory). SNR =A serial number from 000 001 to 999 999. CD =A check digit, from 0-9, calculated according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Serial number as bar code According to Ericsson corporate standard 102 01 - 109. Serial number as characters According to Ericsson group standard 0012-101. Ericsson group factory number system according the Ericsson corporate standard 1120-101 Factory codes: Bilbao S69 Tecom (Taiwan) S48 Type numberThe type number is 6220501-BV and shall be printed “Type 6220501-BV”. G-fieldR-state identification of the CXC-module according to the Marking data 1/151 86 for the KRD. H-fieldR-state identification of the hardware version used during the current Type Approval according to the Marking data 1/151 86 for the KRD. Y 1 -fieldR-state identification of the current KRD Limited Internal MARKING DRAWING 3 (3) Prepared (also subject responsible if other)No. BA/SEM/MD/V José A. Rodrigo151 86-KRD 102 436+ Uen ApprovedCheckedDateRevReference BA/SEM/MD/P (Hilary Brownlow)2002-02-01ELilium-Cecilia according to the Marking data 1/151 86 for the KRD. Y 2 -fieldROA structure identification according to the Marking data 1/151 86 for the KRD. Y 3 -fieldR-state identification of the ROA according to the Marking data 1/151 86 for the KRD. Production weekThe production week shall be given as yyWww (yy = year, ww = week) KRD numberThe KRD number for the product. R-stateThe R-state for the KRD according to the 1095 for the KRD. Repair weekThe field shall be left blank unless a repair centre repairs the unit. The repair week shall then be given as RyyWww (yy = year, ww = week) Manufacturing countryThe text “Made by Sony Ericsson” printed horizontally for phones produced in Bilbao. For phones produced in Tecom (Taiwan) the horizontal text shall be “Made in Taiwan”. *Text “GM48” printed vertically. Print regulations The printing shall be well readable and permanent. Other texts different whose definition is not specified formerly have the following characteristics: Typeface:ZPL II standard font D Type size:min 1.1 mm Line spacing:min 1.5 mm Trademark:min 1.5 mm Approval marks:min 5.0 mm

CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 94 (97) Photographs of the equipment CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 95 (97) Photographs of the equipment CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 96 (97) Photographs of the equipment CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 97 (97) Photographs of the equipment

Application PY76220501-BV Dipl.-Ing. Karin Silberhorn CETECOM GmbH, Essen, Germany Prediction of MPE limit at given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 2 4R PG S π = where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Prediction for GSM 1900 (1850-1910 MHz) Band Maximum peak output power at antenna input terminal: 31,45 dBm Maximum peak output power at antenna input terminal: 1396,368 mW Antenna gain(typical): -1,84 dBi Maximum antenna gain: 0,654 numeric Prediction distance: 20 cm Prediction frequency: 1880 MHz MPE limit for uncontrolled exposure at prediction frequency: 1 2 cm mW Power density at prediction frequency: 0,181680276 2 cm mW Prediction for GSM 850 (824-849 MHz) Band Maximum peak output power at antenna input terminal: 30,47 dBm Maximum peak output power at antenna input terminal: 1114,294 mW Antenna gain(typical): -1,47 dBi Maximum antenna gain: 0,713 numeric Prediction distance: 20 cm Prediction frequency: 839 MHz MPE limit for uncontrolled exposure at prediction frequency: 1 2 cm mW Power density at prediction frequency: 0,158059086 2 cm mW The power density levels at a distance of 20 cm. are well below the maximum levels allowed by the FCC regulations.

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC11issue test report consist of 97 PagesPage 1 (97) BLUETOOTH TM is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM TTI-P-G-166/98-30 Accredited Bluetooth Test Facility (BQTF) Test report no.: 4_0551-01-03/02 FCC Part 24 and Part 22 GM48 FCC ID: PY76220501-BV CETECOM – ICT Services GmbH Untertürkheimerstr. 6-10 66117 Saarbrücken, Germany Telephone: + 49 (0) 681 / 598-0 Fax: + 49 (0) 681 / 9075 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 2 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. 1.2Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telefone: + 49 681 598 - 9100 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom.de Accredited testing laboratory DAR-registration number : TTI-P-G-166/98-30 Accredited Bluetooth TM Test Facility (BQTF) BLUETOOTH TM is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 3 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 1.3Details of applicant Name : Sony Ericsson Mobile Communication AB Street : Nya Vattentornet City : 22188 Lund Country : Sweden Telephone : +46-46-193-242 Telefax : +46-46-193-295 Contact : Mr. Bo Johansson Telephone : +46-46-193-242 1.4Application details Date of receipt of application : 25.02.2002 Date of receipt of test item : 25.02.2002 Date of test : 25.02.-26.02.2002 1.5Test item Type of equipment : Dual Band PCS module (PCS 850 and PCS1900) Type designation:GM48 / 6220501-BV Manufacturer:Applicant Street: City: Country: Serial number:IMEI 001003-83-033173-5 Additional informations: : Frequency:1850 – 1910 MHz and 824 – 849 MHz Type of modulation:300KF2D Number of channels :300 (PCS1900) and 125 (PCS850) Antenna:coax socket and dedicated dual band antenna Power supply:3.6V DC via socket Output power PCS 850:cond. 30.47 dBm Peak , ERP 27.0 dBm (Burst); EIRP: 29.0 dBm (Burst) Output power PCS 1900:cond 31.45 dBm Peak , ERP 27.51 dBm (Burst); EIRP: 29.61 dBm (Burst) Type of equipment:Temperature range : -30°C - +60°C FCC – ID:PY76220501-BV Hardware:P1D Software:R1A017 1.6Test standards: FCC Part 22 and Part 24 CETECOM ICT Services GmbH Test report no.:4_0551-01-03/02Issue date: 2002-03-11Page 4 (97) REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers …

Text truncated - open the document above for the full version.