PY7A3022091Licensed Transmitter

Congratulations on your purchase of the Sony Ericsson K530i. For additional phone content, go to www.sonyericsson.com/fun. Register now to get free online storage and special offers at www.sonyericsson.com/myphone. For product support, go to www.sonyericsson.com/support. Accessories - More for your phone Bluetooth™ Headset HBH-PV705 A powerful Bluetooth™ headset with compact design. •Talk time: up to 12 hours •Standby time: up to 300 hours •Weight: 14 g Bluetooth™ Car Speakerphone HCB-120 A handsfree solution with caller display. For use in the car, office or home. •Talk time: up to 24 hours •Standby time: up to 450 hours Desk Stand CDS-65 Your phone’s best assistant: connect a USB cable, charger and portable handsfree. These accessories can be purchased separately but may not be available in every market. To view the full range go to www.sonyericsson.com/accessories. 1Contents Contents Getting started ................... 4 Calling ............................... 17 Messaging ........................ 25 Imaging ............................. 30 Entertainment ................... 33 Connectivity ...................... 37 More features ................... 43 Important information ...... 45 Index ................................. 56 www.sonyericsson.com/support At Sony Ericsson Product Support there is more information and help to get the most out of your product: User guide with additional information, troubleshooting, tips and tricks, software, settings for Internet and messaging. Sony Ericsson UMTS 2100 GSM/GPRS 900/1800/1900 This User guide is published by Sony Ericsson Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB or its local affiliated company at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide. All rights reserved. ©Sony Ericsson Mobile Communications AB, 2007 Publication number: EN/LZT 108 9414/1 R1A Please note: Some of the services in this User guide are not supported by all networks. This also applies to the GSM International Emergency Number 112. Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not. Please read the Guidelines for safe and efficient use and the Limited warranty chapters before you use your mobile phone. 2Contents Your mobile phone has the capability to download, store and forward additional content, e.g. ringtones. The use of such content may be restricted or prohibited by rights of third parties, including but not limited to restriction under applicable copyright laws. You, and not Sony Ericsson, are entirely responsible for additional content that you download to or forward from your mobile phone. Prior to your use of any additional content, please verify that your intended use is properly licensed or is otherwise authorized. Sony Ericsson does not guarantee the accuracy, integrity or quality of any additional content or any other third party content. Under no circumstances will Sony Ericsson be liable in any way for your improper use of additional content or other third party content. The liquid identity logo, PlayNow, MusicDJ, PhotoDJ, VideoDJ and TrackID are trademarks or registered trademarks of Sony Ericsson Mobile Communications AB. Sony, Memory Stick Micro, and M2 are trademarks or registered trademarks of Sony Corporation. Ericsson is a trademark or registered trademark of Telefonaktiebolaget LM Ericsson. Bluetooth™ is a trademark or registered trademark of Bluetooth SIG Inc. TrackID™ is powered by Gracenote Mobile MusicID™. Gracenote and Gracenote Mobile MusicID are trademarks of Gracenote, Inc. Real is a trademark or a registered trademark of RealNetworks, Inc. RealPlayer® for Mobile is included under license from RealNetworks, Inc. Copyright 1995-2007, RealNetworks, Inc. All rights reserved. Adobe™ Photoshop™ Album Starter Edition is a trademark or registered trademark of Adobe Systems Incorporated. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. T9™ Text Input is a trademark or a registered trademark of Tegic Communications. T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057, United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide. Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. End-user license agreement for Sun™ Java™ J2ME™. 1Restrictions: Software is confidential copyrighted information of Sun and title to all copies is retained by Sun and/or its licensors. Customer shall not modify, decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software. Software may not be leased, assigned, or sublicensed, in whole or in part. 3Contents 2Export Regulations: Software, including technical data, is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. Customer agrees to comply strictly with all such regulations and acknowledges that it has the responsibility to obtain licenses to export, re-export, or import Software. Software may not be downloaded, or otherwise exported or re-exported (i) into, or to a national or resident of, Cuba, Iraq, Iran, North Korea, Libya, Sudan, Syria (as such listing may be revised from time to time) or any country to which the U.S. has e…

Text truncated - open the document above for the full version.

Confidentiality Request Sony Ericsson Datum . Date Beteckn~ng . Reference 2007-05-30 BGL107: 195 s E w!m?~R6m Y'~Y&~PP~V$"&'~S(SW~~'~~~~~~ Ert datum . Your date Er beteckn~ng Your reference Receiver Federal Communications Commission Subject: Request for Confidentiality FCC ID: PY7A3022091 To Whom It May Concern: In accordance with s0.459 of CFR 47, Sony Ericsson Mobile Communications AB requests confidentiality for the below listed items for our mobile phone type AAD- 3022091 -BV, FCC ID: PY7A3022091: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational/TechnicaI Descriptions These items contain detailed system and equipment description and related information about the product which Sony Ericsson Mobile Communications AB considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Ericsson Mobile Communications AB also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Best Regards, Kent Lorentzon Development Engineer - Global Type Approvals Sony Ericsson Mobile Communications AB Sony Ericsson Mobile Communications AB Styrelsens sate: Lund Mornsnr . VA.TNo: SE556615665801 Registered office: Lund Organisationsnr ' Reg No: 55661 5-6658 Postadress - Mail Besoksadress Office address Telefon ' Telephone Telefax Telefax SE-221 88 Lund Nya Vattentornet Nat 046-1 9 40 00 Nat 046-1 9 41 00 Sweden Lund Int +46 46 19 40 00 Int +46 46 19 41 00

CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 18 of 25 8 Photographs of the EUT Photo 5: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 19 of 25 Photo 6: Photo 7: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 20 of 25 Photo 8: Photo 9: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 21 of 25 Photo 10: Photo 11:

Company Internal MARKING DRAWING 1 (4) Prepared (also subject responsible if other) No. SEM/BGLCV, (Yulin Cheng) 151 86–SVV 107 747/1 Uen Approved Checked Date Rev Reference SEM/BGLCV, (Yulin Cheng) 2007-5-24 A 12 Approved according to 000 21–LXE 107 42/1 K530i, KRH-label, TYPE: AAD-3022091-BV, No Made in... 1 General information The format of the label is based on a label SVF 930 2406 (40,4 x 31,4 mm). If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. All bar codes, when applicable, are according to Ericsson corporate standard 102 01–109 Uen. All bar codes shall fulfil minimum print quality C according to ANSI X3.182-1990 as stated in Ericsson corporate standard 102 01–1003 Uen. No bar codes are allowed to be closer to a label edge than 2 mm! (quiet zone). “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. The label shall be placed on the back of the telephone according to the Assembly Drawing (151 88-) for the KRH. 2 Printing information Content Format Line 1 (1,0/29,0) SIM-card logo Graphics, height 7,3 mm. According to 1424-SVF 930 1418. Rotated 90° Clockwise. Line 2a (20,7/1,0) Sony Ericsson stylized name. Graphics, height 2,0 mm. According to 190 89–EN/LZT 108 5347 Line 2b (20,2/18,0) Model name, “K530i” Text, height 1,2 mm. Line 2c (20,2/23,0) Product number of the DPY kit in which the phone is packed. Printed without R-state, “DPY 101 0000/000” Text, height 1,2 mm. Line 3a (22,2/1,0) Type number of the phone (KRH), “Type: AAD-3022091-BV”. Text, height 1,2 mm. Line 3b (22,2/18,0) ROA and R-state identification field, “FG” Text, height 1,2 mm. According to the 3/151 86- document in the 1095- for the SVV. Company Internal MARKING DRAWING 2 (4) Prepared (also subject responsible if other) No. SEM/BGLCV, (Yulin Cheng) 151 86–SVV 107 747/1 Uen Approved Checked Date Rev Reference SEM/BGLCV, (Yulin Cheng) 2007-5-24 A 12 Content Format Line 3c (22,2/24,0) Location code of where the phone is flashed, if applicable, “FFF” Text, height 1,2 mm. According to 1050-LZT 108 6537. Line 3d (22,2/27,5) Production week (flash), “yy’W’ww” (yy = year, ww = week) Text, height 1,2 mm. Line 3e (22,2/34,0) Repair week, if applicable. “Ry’W’ww” (y = year, ww = week) Text, height 1,2 mm. Line 4a (24,0/1,0) Country approval mark 1 “FCC ID: PY7A3022091” Text, height 1,2 mm. Line 4b (24,0/15,0) Country approval mark 2 “IC: 4170B-A3022091” Text, height 1,2 mm. Line 5 (26,5/1,0) Line 6a in bar code. As desired by supplier (e.g. only actual number). Bar code, height 2,0 mm. As desired by supplier (e.g. Code 128 symbology). Line 6a (28,0/1,0) Supplier’s identification for trace- ability of the telephone, as desired by supplier (e.g. “S/N: nnn....” for serial number). Text, height 1,2 mm. Defined by supplier. Line 6b (28,0/13,0) Actual electronic serial number (IMEI) of the phone (KRH), “00000000-000000-0” Text, height 2,0 mm. In the format TAC-SNR-CD. TAC and SNR derived from the 3/151 86- document in the 1095- for the SVV. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 6c (28,0/28,5) CE approval symbol. Graphics, height 5 mm. According to 1424-SVF 930 52. Line 6d (28,0/35,3) The Notified body number. “0682” Text, height 2,0 mm. Line 7 (30,2/1,0) Line 6b in bar code (only actual number, without data identifier). Bar code, height 2,0 mm. Code 128 symbology, code C subset. If uneven number of digits, code B subset shall be used for the last digit. Company Internal MARKING DRAWING 3 (4) Prepared (also subject responsible if other) No. SEM/BGLCV, (Yulin Cheng) 151 86–SVV 107 747/1 Uen Approved Checked Date Rev Reference SEM/BGLCV, (Yulin Cheng) 2007-5-24 A 12 3 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 3.1 Conceptual picture double underlined = major changes since last revision. Company Internal MARKING DRAWING 4 (4) Prepared (also subject responsible if other) No. SEM/BGLCV, (Yulin Cheng) 151 86–SVV 107 747/1 Uen Approved Checked Date Rev Reference SEM/BGLCV, (Yulin Cheng) 2007-5-24 A 12 3.2 Label placement To find the label follow these steps: 1. Remove the cover on the rear side of the product. 2. Remove the battery. 3. The label is located behind the battery. Rear side of the phone Place for battery Label placement

CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 22 of 25 Photo 12: Photo 13: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 23 of 25 Photo 14: Photo 15: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 24 of 25 Photo 16: Photo 17: CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 25 of 25 Photo 18: Photo 19:

1 (11) Company Internal REPORT Prepared (also subject responsible if other) No. LD/SEMC/BGLIM Hamid Kami Shirazi BGLI07:184 Approved Checked Date Rev Reference LD/SEMC/BGLIM/C Peter Lindeborg 070528 070525 A File Report issued by Accredited SAR Laboratory For PY7A3022091 (K530i) Date of test: 23, 24 May 2007 Laboratory: SAR Test Laboratory Sony Ericsson Mobile Communications AB Nya Vattentornet SE-221 82 LUND, Sweden Testing Engineer: Hamid Kami Shirazi [email protected] +46 46232644 Testing Approval Peter Lindeborg Sign [email protected] +46462126180 Statement of Compliance Sony Ericsson Mobile Communications AB declares under its sole responsibility that the product Sony Ericsson Type AAD-3022091-BV; FCC ID: PY7A3022091; IC:4170A-3022091 to which this declaration relates, is in conformity with the appropriate RF exposure standards recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (None) This laboratory is accredited to ISO/IEC 17025 (SWEDAC accreditation no. 1847). Laboratories are accredited by the Swedish Board for Accreditation and Conformity Assessment (SWEDAC) under the terms of Swedish legislation. The accredited laboratory activities meet the requirements in SS-EN ISO/IEC 17025 (2005). This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Sony Ericsson encourages all feedback, both positive and negative, on this report. © Sony Ericsson Mobile Communication AB, 2007 2 (11) Company Internal REPORT Prepared (also subject responsible if other) No. LD/SEMC/BGLI/NM Hamid Kami Shirazi BGLI07:184 Approved Checked Date Rev Reference LD/SEMC/BGLI/NMC Peter Lindeborg 070528 070525 A File 1 Table of contents 2 INTRODUCTION ............................................................................................................................................................. 3 3 DEVICE UNDER TEST ................................................................................................................................................... 3 3.1 A NTENNA DESCRIPTION................................................................................................................................................... 3 3.2 D EVICE DESCRIPTION....................................................................................................................................................... 3 4 TEST EQUIPMENT.......................................................................................................................................................... 4 4.1 D OSIMETRIC SYSTEM....................................................................................................................................................... 4 4.2 A DDITIONAL EQUIPMENT................................................................................................................................................. 4 5 ELECTRICAL PARAMETERS ON THE TISSUE SIMULATING LIQUID ............................................................ 4 6 SYSTEM ACCURACY VERIFICATION ...................................................................................................................... 5 7 SAR MEASUREMENT UNCERTAINTY ...................................................................................................................... 6 8 TEST RESULTS ................................................................................................................................................................ 7 9 REFERENCES .................................................................................................................................................................. 8 10 APPENDIX......................................................................................................................................................................... 9 10.1 P HOTOGRAPHS OF THE DEVICE UNDER TEST................................................................................................................. 9 10.2 DEVICE POSITION ON SAM TWINS PHANTOM............................................................................................................ 11 10.3 A TTACHMENTS.......................................................................................................................................................... 12 3 (11) Company Internal REPORT Prepared (also subject responsible if other) No. LD/SEMC/BGLI/NM Hamid Kami Shirazi BGLI07:184 Approved Checked Date Rev Reference LD/SEMC/BGLI/NMC Peter Lindeborg 070528 070525 A File 2 Introduction In this test report, compliance of the Sony Ericsson PY7A3022091 (K530i) portable telephone with RF safety guidelines is demonstrated. The applicable RF safety guidelines and the SAR measurement specifications used for the test are described in the SAR Measurement Specifications of Wireless Handsets [1]. 3 Device under Test 3.1 Antenna Description Type Internal antenna Location Inside, Back, at the top Max length 32mm Dimensions Max width 24mm Configuration PIFA 3.2 Device description Device model PY7A3022091(K530i) Serial number CB5AB92YV#7629 Mode GSM1900 Crest Factor 8.3 Multiple Access Scheme TDMA Ch512 Ch661 Ch810 Maximum Output Power Setting (dBm) 29.2 29.2 29.2 Factory Tolerance in Power Setting ±0.5dB Maximum Peak Output Power (dBm) 29.7 29.7 29.7 Data and connectivity GPRS Class: 10 Capability Class: B Ch512 Ch661 Ch810 Maximum Output Power Setting (dBm) 28.0 28.0 28.0 Factory Tolerance in Power Setting ±0.5dB Maximum Peak Output Power (dBm) 28.…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Straße 6-10 . D-66117 Saarbrücken Phone: +49 (0) 681-598-0 Fax:-9075 RSC-Laboratory 2007-05-21 Page 1 of 36 Accredited testing-laboratory DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463A-1 (IC) Certification ID: DE 0001 Accreditation ID: DE 0002 Accredited Bluetooth ® Test Facility (BQTF) The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license Test report no. : 2-4576-07-02/07 Type identification : AAD-3022091-BV Applicant : Sony Ericsson Mobile Communications AB FCC ID : PY7A3022091 IC Reg. No. : 4170B-A3022091 Test standards : 47 CFR Part 24 RSS - 133 Issue 3 CETECOM ICT Services GmbH Test report no.: 2-4576-07-02/07 2007-05-21 Page 2 of 36 Table of contents 1 G e n e r a l i n f o r m a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 3 1.1 Notes ...................................................................................................................................................................3 1.2 Testing laboratory ...............................................................................................................................................4 1.3 Details of applicant .............................................................................................................................................4 1.4 Application details ..............................................................................................................................................4 2 T e s t s t a n d a r d / s : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 5 3 T e c h n i c a l t e s t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . 6 3.1 Details of manufacturer .......................................................................................................................................6 3.1.1 Test item......................................................................................................................................................6 3.2 Test Setup............................................................................................................................................................7 4 S t a t e m e n t o f C o m p l i a n c e . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . 8 4.1 Summary of Measurement Results......................................................................................................................8 4.1.1 PCS 1900.....................................................................................................................................................8 5 M e a s u r e m e n t s a n d r e s u l t s . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 9 5.1 PART PCS 1900 .................................................................................................................................................9 5.1.1 RF Power Output.........................................................................................................................................9 5.1.2 Frequency Stability ...................................................................................................................................13 5.1.3 Radiated Emissions ...................................................................................................................................16 5.1.4 Receiver Radiated Emissions ....................................................................................................................22 5.1.5 Conducted Spurious Emissions .................................................................................................................25 5.1.6 Block Edge Compliance............................................................................................................................28 5.1.7 Occupied Bandwidth .................................................................................................................................30 6 T e s t E q u i p m e n t u t i l i z e d . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 3 4 CETECOM ICT Services GmbH Test report no.: 2-4576-07-02/07 2007-05-21 Page 3 of 36 1 General infor mat ion 1 . 1 N o t e s The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Test laboratory manager: 2007-05-21 Detlev Gillmann Date Name Signature Technical responsibility for area of testing: 2007-05-21 Harro Ames Date Name Signature CETECOM ICT Services GmbH Test repor…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Straße 6-10 . D-66117 Saarbrücken Phone: +49 (0) 681-598-0 Fax:-9075 RSC-Laboratory 2007-05-22 Page 1 of 25 Accredited testing-laboratory DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463A-1 (IC) Certification ID: DE 0001 Accreditation ID: DE 0002 Accredited Bluetooth ® Test Facility (BQTF) The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license Annex to Test report no. : 2-4576-07-02/07 Type identification : AAD-3022091-BV Applicant : Sony Ericsson Mobile Communications AB FCC ID : PY7A3022091 IC Reg. No. : 4170B-A3022091 Test standards : 47 CFR Part 15 RSS - 210 Issue 6 CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 2 of 25 Table of contents 1 General information.................................................................................................. 3 1.1 Notes ...................................................................................................................................................................3 1.2 Testing laboratory ...............................................................................................................................................4 1.3 Details of applicant .............................................................................................................................................4 1.4 Application details ..............................................................................................................................................4 2 Test standard/s:........................................................................................................ 5 3 Technical tests.......................................................................................................... 6 3.1 Details of manufacturer.......................................................................................................................................6 3.2 Test item(s) and test configuration......................................................................................................................6 4 Summary of Measurement Results and list of all performed test cases ......................... 7 5 Measurements and results ......................................................................................... 8 6 Annex A: FCC Part 15 Subpart B .............................................................................. 9 6.1 Conducted Limits ................................................................................................................................................9 6.2 Receiver spurious emission radiated (Idle mode) .............................................................................................12 7 Photographs of the Test Set-up ................................................................................ 15 8 Photographs of the EUT .......................................................................................... 18 CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 3 of 25 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Test laboratory manager: 2007-05-21 Detlev Gillmann Date Name Signature Technical responsibility for area of testing: 2007-05-21 Harro Ames Date Name Signature CETECOM ICT Services GmbH Annex to Test report no.: 2-4576-07-02/07 2007-05-22 Page 4 of 25 1.2 Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 e-mail: [email protected] Internet: http://www.cetecom-ict.de State of accreditation: Accredited by: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Testing location, if diff…

Text truncated - open the document above for the full version.