PY7A3880065GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD1&8 / HSPA mobile phone with Bluetooth, WLAN, GPS/A-GPS, FM receiver

Elm ™ User guide Important information Please read the Important information leaflet before you use your mobile phone. Experience more. Discover how. Fill it with pop and let it rock. Share your life in pictures. Or why not go online for the latest updates? Your new phone is the key to a wider world. And it's just around the corner. Get started with this User guide. And join us online to get the full picture. Music, games, apps, updates, downloads, support and more. All in one place: www.sonyericsson.com/Elm Don't forget to update your phone software. See Updating your phone on page 28. User guide in the phone An extended User guide is available in your phone. To access the User guide in your phone • Select Menu > Settings > User help > User guide. 2 Phone overview 1Ear speaker 1 11 10 12 13 14 2 3 4 5 6 7 9 8 2Light sensor 3Connector for charger, handsfree, and USB cable 4Screen 5Selection keys 6Call key 7Activity menu key 8Navigation key 9Keylock key 10Video call camera* 11End key, On/off key 12C key (Clear) 13Silent key 14Microphone 3 15Microphone 15 17 16 18 19 20 21 16Flash light 17Volume, digital zoom key 18Main camera lens 19Camera key 20Speaker 21Strap hole * The video call camera may not be available in your phone. 4 Getting started To insert the SIM card 1 Remove the battery cover. 2 Slide the SIM card into its holder with the gold-coloured contacts facing down. 5 To insert the battery 1 Insert the battery with the label side up and the connectors facing each other. 2 Attach the battery cover. Turning on the phone To turn on the phone 1 Press and hold down . 6 2 Enter your SIM card PIN (Personal Identification Number), if requested, and select OK. 3 Select a language. 4 Follow the instructions that appear. If you want to correct a mistake when you enter your PIN, press . Help In addition to this User guide, Feature guides and more information are available at www.sonyericsson.com/support. There are also help functions in your phone. See the following instructions on how to access them. To view tips and tricks • Select Menu > Settings > User help > Tips and tricks. To view information about functions • Scroll to a function and select Info, if available. In some cases, Info appears under Options. To view the phone status • Press the volume key. Phone, memory and battery information is shown. Supported services and features Some of the services and features described in this User guide are not supported by all networks and/or service providers in all areas. Without limitation, this applies to the GSM International Emergency Number 112. Please contact your network operator or service provider to determine availability of any specific 7 service or feature and whether additional access or usage fees apply. Charging the battery The phone battery is partly charged when you buy it. To charge the battery 1 Connect the charger to the phone. 2 Remove the charger by tilting the plug upwards. Maximising battery performance • Charge your phone often. The battery lasts longer if you charge it frequently. • If you are in an area with no coverage, your phone repeatedly scans for available networks. This consumes power. If you cannot move to an area with better coverage, turn off your phone temporarily. 8 • Turn off 3G, Bluetooth™ wireless technology, any active Wi-Fi™ connection, and GPS when you do not need these functions. • Do not cover the phone antenna when you are engaged in a call. Go to www.sonyericsson.com/support to learn more about how to maximise the battery performance. Navigation To access the main menu • When Menu appears on the screen, press the centre selection key to select Menu. • If Menu does not appear on the screen, press , and then press the centre selection key to select Menu. To navigate the phone menus • Press the navigation key upwards, downwards, left or right to move through the menus. To end a function • Press . 9 To return to standby • Press . To delete items • Press to delete items such as numbers, letters, pictures and sounds. Shortcuts You can use the navigation key shortcuts to go directly to functions from standby. To use navigation key shortcuts • Press the navigation key upwards, downwards, left or right to go directly to a function. To edit a navigation key shortcut 1 Select Menu > Settings > General > Shortcuts. 2 Scroll to an option and select Edit. 3 Scroll to a menu option and select Shortc.. Activity menu The activity menu gives you quick access to: • New events – missed calls and new messages. • Running apps – applications that are running in the background. • My shortcuts – add your favourite functions to access them quickly. • Internet – connect conveniently to the Internet. To open the activity menu • Press . 10 Memory card You may have to purchase a memory card separately. Your phone supports a microSD™ memory card, adding more storage space to your phone. This type of card can also be used as a portable memory card with other compatible devices. You can move content between a memory card and the phone memory. To insert a memory card • Remove the battery cover and insert the memory card with the gold-coloured contacts facing down. 11 To remove a memory card • Remove the battery cover and slide the memory card to remove it. Entering text You can use multitap text input or Quick text input to enter text. The Quick text input method uses a dictionary application in your phone. To change the writing language • When you enter text, press and hold down . To change the text input method • When you enter text, press and hold down . To shift between upper- and lower-case letters or numbers • When you enter text, press . To enter numbers 1 When you enter text, press repeatedly until appears at the top of the screen. 12 2 To enter a number, press . To enter a number from text input mode, you can press and hold down – . To enter punctuation marks and symbols 1 When you enter text, press briefly. 2 Scroll to a symbol and select Insert. To select from the most …

Text truncated - open the document above for the full version.

Datum'Date Beteckning • Reference Son Eric son VA, handlagga,e, namn, tin • ANending to this maNer, name, telephone Ert datum' Your date Er beteckning . Your reference Confidentiality Request 2009-12-30 CCDA09:659 SEM/CCDALE Afrah Sadiq +46 10 80 12250 Receiver Federal Communications Commission Subject: Request for Confidentiality FCC ID: PY7A3880065 To Whom It May Concern: In accordance with §0.459 of CFR 47, Sony Ericsson Mobile Communications AB requests confidentiality for the below listed items for our mobile phone type AAD­ 3880065-BV, FCC 10: PY7A3880065: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. OperationallTechnical Descriptions These items contain detailed system and equipment description and related information about the product which Sony Ericsson Mobile Communications AB considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Ericsson Mobile Communications AB also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Best Regards, Afrah Sadiq Development Engineer - Global Type Approval Sony Ericsson Mobile Communications AB Sony Ericsson Mobile Communications AS Styrelsens sate: Lund Momsnr' V.A. T.No: SE556615665801 Registered office: Lund Organisationsnr • Reg No: 556615-6658 Postadress • Mail Besiiksadress • Office address Telefon • Telephone Telefax • Telefax SE-221 88 Lund Nya Vattentornet Nat 046-19 40 00 Nat 046-1941 00 Sweden Lund Int +4646194000 Int +4646194100

CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 69 of 86 8 Photographs of t he E UT Photo documentation: External photos Photo 1: Photo 2: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 70 of 86 Photo 3: Photo 4: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 71 of 86 Photo 5: Photo 6: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 72 of 86 Photo 7: Photo 8: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 73 of 86 Photo 9:

Company Internal MARKING DRAWING 1 (3) Prepared (also subject responsible if other) No. Flora Kang (28848956) xxxx-xxxx Approved Checked Date Rev Reference Flora Kang (28848956) 2009-11-06 1 4 J10i2, Label Content Specification, Mobile Phone, Made in Type Number: AAD-3880065-BV FCC ID: PY7A3880065 Canada IC: 4170B-A3880065 1 General information Mobile Phone label part no • 1001-2238 Bar code • Standard: according to Ericsson corporate standard 102 01–109 Uen • Print quality: C, according to ANSI X3.182-1990 as stated in Ericsson corporate standard 102 01– 1003 Uen • Quiet zone: No bar codes are allowed to be closer to a label edge than 2 mm! Text If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. Coordinates “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. 2 Printing information Content Format Line 1a (2,5/1,0) Sony Ericsson stylized name. Graphics, height 1,5 mm. According to 1200-1925. Line 1b (2,5/16,0) Model Name “J10i2” Text, height 1,2 mm. Line 2a (4,5/1,0) Type number of the phone, “Type: AAD-3880065-BV”. Text, height 1,2 mm. Line 2b (4,5/16,0) HW & SW identification field, if applicable; “FFGG” Text, height 1,2 mm. According to Type-testing report under Product Model Specifying Document Line 3a (5,7/20,7) CE approval symbol Graphics, height 5 mm. According to 1210-0131. Line 3b (5,7/27,7) The notified body number “0682” Text, height 1,2 mm. Line 4a (6,5/1,0) “FCC ID: PY7A3880065” Text, height 1,2 mm. Line 4b (6,5/16,0) Location code of where the phone is flashed, if applicable, “XXX” Text, height 1,2 mm. Line 5a (8,5/1,0) “IC: 4170B-A3880065” Text, height 1,2 mm. Line 5b (8,5/15,0) Product number without revision of the Sales Item in which the phone is packed, if applicable. “SI XXXX-XXXX” Text, height 1,2 mm. Line 6 (10,5/1,0) Line 8a in bar code. As desired by supplier (e.g. only actual number). Bar code, height 2,0 mm. As desired by supplier (e.g. Code 128 symbology). Line 7 (11,0/26,0) “Alert Symbol” Graphics, height 5 mm According to 1001-5859 Line 8a (12,5/1,0) Supplier’s identification for trace-ability of the telephone, as desired by supplier (e.g. “S/N: nnn....” for serial number). Text, height 1,2 mm. Defined by supplier. Company Internal MARKING DRAWING 2 (3) Prepared (also subject responsible if other) No. Flora Kang (28848956) xxxx-xxxx Approved Checked Date Rev Reference Flora Kang (28848956) 2009-11-06 1 4 Line 8b (12,5/15,0) Actual electronic serial number (IMEI) of the mobile phone, “00000000-000000-0” Text, height 1,2 mm. In the format TAC-SNR-CD. TAC and SNR derived from pos 500 in BOM. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 9 (14,5/1,0) Line 8b in bar code (only actual number, without data identifier). Bar code, height 2,0 mm. Code 128 symbology, code C subset. If uneven number of digits, code B subset shall be used for the last digit. Line 10 (16,5/15,0) Repair week, if applicable. “Ry’W’ww” (y = year, ww = week) Text, height 1,2 mm. Line 11a (18,5/1,0) Marking of origin. “Made in Xxx”; “Xxx” = actual country of production of the included telephone, in English Text, height 1,2 mm. Line 11b (18,5/15,0) Production week (flash), “yy’W’ww” (yy = year, ww = week) Text, height 1,2 mm. Line 11c (18,5/26,0) WEE trashcan without bar symbol Graphics, min. height 5mm According to 1202-5537. 3 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 3.1 Conceptual picture double underlined = major changes since last revision. Company Internal MARKING DRAWING 3 (3) Prepared (also subject responsible if other) No. Flora Kang (28848956) xxxx-xxxx Approved Checked Date Rev Reference Flora Kang (28848956) 2009-11-06 1 4 Label placement To find the label follow these steps: 1. Remove the cover on the rear side of the product. 2. Remove the battery. 3. The label is located behind the battery. Rear side of the phone Place for battery Label placement

CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 74 of 86 Photo documentation: Internal photos Photo 1: Photo 2: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 75 of 86 Photo 3: Photo 4: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 76 of 86 Photo 5: ́ Photo 6: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 77 of 86 Photo 7: Photo 8: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 78 of 86 Photo 9: Photo 10: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 79 of 86 Photo 11: Photo 12: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 80 of 86 Photo 13: Photo 14: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 81 of 86 Photo 15: Photo 16: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 82 of 86 Photo 17: Photo 18: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 83 of 86 Photo 19: Photo 20: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 84 of 86 Photo 21: Photo 22: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 85 of 86 Photo 23: Photo 24: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 86 of 86 Photo 25: Photo 26:

APPLICANT: Sony Ericsson Mobile Communications Inc. FCC ID: PY7A3880065 REPORT 1(82) Prepared (also subject responsible if other) No. SEM/CCMVAR Rodney Dixon REP 2009 006 J10i2 02 Approved Checked SEM/CCMVPCP Gary Thomas D E E E x x h h i i b b i i t t 1 1 1 1 Exhibit 11: SAR Test Report of Portable Cellular Phone FCC ID: PY7A3880065 Model: J10i2 Date of test: Date of Report: November 19 – December 01, 2009 February 18, 2010 Laboratory: SAR Testing Laboratory Sony Ericsson Mobile Communications, Inc. 7001 Development Drive, P.O. Box 13969, Research Triangle Park, NC, 27709, USA Tested by: Rodney G. Dixon Eng. Technician IV, Global Type Approval Test Responsible: Gary Thomas Technical Manager Accreditation: A2LA Certificate #1650-01 This laboratory is accredited to ISO/IEC 17025-2003 to perform the following electromagnetic exposure tests: Specific Absorption Rate (SAR) Dielectric parameters RF power measurement On the following types of products: Wireless communications devices. Statement of Compliance: Sony Ericsson Mobile Communications, Inc declares under its sole responsibility that portable cellular telephone FCC ID PY7A3880065 model J10i2 to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines (FCC 47 CFR §2.1093). It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (none) © Sony Ericsson Mobile Communications, Inc. 2009 This test report shall not be reproduced except in full, without written approval of the laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Sony Ericsson Mobile Communications encourages all feedback, both positive and negative, on this test report. APPLICANT: Sony Ericsson Mobile Communications Inc. FCC ID: PY7A3880065 REPORT 2(82) Prepared (also subject responsible if other) No. SEM/CCMVAR Rodney Dixon REP 2009 006 J10i2 02 Approved Checked SEM/CCMVPCP Gary Thomas D E E E x x h h i i b b i i t t 1 1 1 1 Table of Contents 1. Introduction 3 2. Description of the Device Under Test 3 2.1 Customer Details 3 2.2 Device Description 3 2.3 Antenna Description 4 3. Test Equipment Used 5 3.1 Dosimetric System 5 3.2 Additional Equipment 6 4. Electrical parameters of the tissue simulating liquid 7 5. System Accuracy Verification 9 6. Test Results 10 6.1 Head Adjacent Test Results 11 6.2 Body-Worn Test Results 15 References 18 Appendix 1: SAR distribution comparison for system accuracy verification 19 Appendix 2: SAR distribution plots for Phantom Head Adjacent Use 28 Appendix 3: SAR distribution plots for Body Worn Configuration 57 Appendix 4: Probe Calibration Certificate 66 Appendix 5: Measurement Uncertainty Budget 73 Appendix 6: Photographs of the device under test 79 APPLICANT: Sony Ericsson Mobile Communications Inc. FCC ID: PY7A3880065 REPORT 3(82) Prepared (also subject responsible if other) No. SEM/CCMVAR Rodney Dixon REP 2009 006 J10i2 02 Approved Checked SEM/CCMVPCP Gary Thomas D E E E x x h h i i b b i i t t 1 1 1 1 1. Introduction The Sony Ericsson SAR Laboratory has performed measurements of the maximum potential exposure to the user of portable cellular phone FCC ID PY7A3880065 model J10i2. The Specific Absorption Rate (SAR) of this product was measured. The applicable RF safety guidelines and the SAR measurement specifications used for the test are described in [1]. 2. Description of the Device Under Test All information in this section was supplied by the customer. 2.1 Customer Details Company Name: Sony Ericsson Mobile Communications (USA) Inc. Address: 7001 Development Drive P.O. Box 13969 Research Triangle Park, NC 27709, USA Department: Global Type Acceptance Contact Name: Iyad Hindi 2.2 Device Description Device Model AAD-3880065-BV Market Name J10i2 GPRS Multislot Class 10 EDGE Class 10 GPRS Capability Class B BT Class and Conducted Power Class 1, 6 dBm (4 mW) Production Unit or Identical Prototype Note 1 Identical Prototype Hardware Version AP Software Version R7AA040 Device Category Portable RF Exposure Environment General Population / Uncontrolled Note 1: Per 47 47 CFR §2.908 Serial Number (of EUT used for each test) BX900ZN51W BX900ZN53K Mode GSM 800 GSM 1900 Crest Factor 8.3 8.3 Multiple Access Scheme TDMA TDMA Channel No. 128 189 251 512 660 810 Measured Power Level [dBm] Note 2 33.4 33.5 33.4 30.5 30.5 30.4 Product Maximum Power Level [dBm] Note 2 33.5 30.5 Transmitting Frequency Range [MHz] 824.2 – 848.8 1850.2 – 1909.8 APPLICANT: Sony Ericsson Mobile Communications Inc. FCC ID: PY7A3880065 REPORT 4(82) Prepared (also subject responsible if other) No. SEM/CCMVAR Rodney Dixon REP 2009 006 J10i2 02 Approved Checked SEM/CCMVPCP Gary Thomas D E E E x x h h i i b b i i t t 1 1 1 1 WLAN Output Power Serial Number of EUT BX900ZN4ZX Mode Max Output Power [dBm] Note 2 Factory Tolerance [dBm] Note 2 Measured Power [dBm] Note 2, 3 Ch 1 Ch 6 Ch 11 Ch 13 801.11b 1Mbit/sec 17.5 1 17.7 17.6 17.7 17.7 801.11b 2Mbit/sec 801.11b 5.5Mbit/sec 801.11b 11Mbit/sec 801.11g 6Mbit/sec 13.5 1 13.6 13.6 13.7 13.5 801.11g 9Mbit/sec 801.11g 12Mbit/sec 801.11g 18Mbit/sec 801.11g 24Mbit/sec 801.11g 36Mbit/sec 801.11g 48Mbit/sec 801.11g 54Mbit/sec Note 2: All power levels in this section refer to average power in dBm. Note 3: Only the highest reported power level per mode is shown in this table. 2.3 Antenna Description Type Internal Antenna Location Bottom of Phone Main and WLAN antennas distance 80 mm Dimensions Max Length 30 mm Max Width 15 mm Configuration Semi-PIFA APPLICANT: Sony Ericsson Mobile Communications Inc. FCC ID: PY7A3880065 REPORT 5(82) Prepared (also subject responsible if other) No. SEM/CCMVAR Rodney Dixon REP 2009 006 J10i2 02 …

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Straße 6-10 . D-66117 Saarbrücken Phone: +49 (0) 681-598-0 Fax: -9075 RSC-Laboratory 2009-12-18 Page 1 of 86 Accredited testing-laboratory DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3462C-1 (IC) Certification ID: DE 0001 Accreditation ID: DE 0002 Accredited Bluetooth ® Test Facility (BQTF) The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license Test report no. : 1-1065-70-06/09 Type identification : AAD-3880065-BV Applicant : Sony Ericsson Mobile Communications AB FCC ID : PY7A3880065 IC Certification No : 4170B-A3880065 Test standards : 47 CFR Part 2 47 CFR Part 15 RSS - 210 Issue 7 CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 2 of 86 Table of contents 1 G e n e r a l i n f o r m a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 3 1.1 Notes ...................................................................................................................................................................3 1.2 Testing laboratory ...............................................................................................................................................4 1.3 Details of applicant .............................................................................................................................................4 1.4 Application details ..............................................................................................................................................4 2 T e s t s t a n d a r d / s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 5 3 T e c h n i c a l t e s t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . 6 3.1 Details of manufacturer .......................................................................................................................................6 3.1.1 Test item......................................................................................................................................................6 3.1.2 Additional EUT information For IC Canada (appendix 2)..........................................................................7 3.1.3 EUT operating modes..................................................................................................................................8 3.1.4 Extreme conditions testing values ...............................................................................................................8 4 S u m m a r y o f M e a s u r e m e n t R e s u l t s a n d l i s t o f a l l p e r fo r m e d t e s t c a s e s . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 R F m e a s u r e m e n t t e s t i n g . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . 1 0 5.1 Description of test set-up...................................................................................................................................10 5.1.1 Radiated measurements.............................................................................................................................10 5.1.2 Conducted measurements..........................................................................................................................10 5.2 Referenced Documents .....................................................................................................................................11 5.3 Additional comments ........................................................................................................................................11 5.4 Antenna gain .....................................................................................................................................................11 5.5 Peak Power Spectral density (digitally modulated systems) §15.247(e)...........................................................12 5.6 Spectrum Bandwidth of a DSSS System / 6 dB Bandwidth §15.247(a)(2).......................................................16 5.7 Spectrum Bandwidth of a DSSS System / 20 dB Bandwidth............................................................................20 5.8 Maximum output power (conducted) §15.247 (b)(3) ........................................................................................24 5.9 Max. peak output power (radiated) §15.247 (b)(3) ...........................................................................................28 5.10 Band-edge compliance of conducted emissions §15.247 (d) ........................................................................29 5.11 Band-edge compliance of radiated emissions §15.205 .................................................................................31 5.12 Spurious Emissions - conducted (Transmitter) §15.247 (c) ..........................................................................33 5.13 Spurious Emissions - radiated (Transmitter) §15.209...................................................................................43 5.14 Spurious Emissions - radiated (Receiver) §15.109 / 209 ..............................................................................59 5.15 Spurious Emissions - radiated <30 MHz §15.20…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 67 of 86 7 Photographs of t he Test Set- up Photo documentation: Photo 1: Photo 2: CETECOM ICT Services GmbH Test report no.: 1-1065-70-06/09 2009-12-18 Page 68 of 86 Photo 3: