PY7A3880092GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD1&2&5 / HSPA mobile phone with Bluetooth, WLAN, A-GPS, FM receiver

X8 User guide – short version July 22, 2010 23:19:44 User guide in the phone An extended User guide is available in your phone. The extended User guide is also available at www.sonyericsson.com/support. To access the User guide in your phone 1 From the Home screen, drag upwards. 2 Find and tap User guide. If the supplied memory card is not inserted into your phone, you can access the User guide by selecting the Online user guide option after you tap User guide in step 2. User support application The support application is your window to Sony Ericsson support. Watch how-to videos, get the latest support news, enter the support zone or get the latest software for your phone. To open the user support application • From the Home screen, flick through the horizontal list of widgets and tap Support . Experience more. Discover how. Visit www.sonyericsson.com/support to get the most from your phone. 2 July 22, 2010 23:19:44 Important information Please read the Important information leaflet before you use your mobile phone. Some of the services and features described in this User guide are not supported in all countries/regions or by all networks and/or service providers in all areas. Without limitation, this applies to the GSM International Emergency Number 112. Please contact your network operator or service provider to determine availability of any specific service or feature and whether additional access or usage fees apply. Assembly To remove the battery cover • Insert the tip of your finger or a thin object into the opening on the side of the phone, between the phone and the battery cover, and slowly lift up the cover. Do not use sharp objects that may damage parts of the phone. 3 July 22, 2010 23:19:44 To insert the SIM card and the memory card 1 2 • Slide in the SIM card and the memory card with the gold- coloured contacts facing down. To insert the battery • Insert the battery with the battery usage labels facing down and the connectors facing each other. 4 July 22, 2010 23:19:45 To attach the battery cover 1 2 1 Secure the left side of the battery cover by aligning it into the openings on the rear left of the phone. 2 Press the right side of the battery cover down to lock the cover into place. Turning the phone on and off To turn on the phone 1 Press and hold down the key on the top of the phone. 2 Press to unlock the screen. 3 Enter your SIM card PIN, when requested, and select OK. 4 At first startup, follow the instructions in Setup guide. Your PIN is supplied by your network operator. If you want to correct a mistake made while entering your SIM card PIN, press . 5 July 22, 2010 23:19:45 To turn off the phone 1 Press and hold until the options menu opens. 2 In the options menu, tap Power off. 3 Tap OK. To activate the screen • Press . Starting your phone for the first time The first time you start your phone, a setup guide helps you enter essential phone settings and set up your email and online services accounts. This is also a good time to use Sony Ericsson Sync to synchronise your old contacts with your new phone or to import contacts from a SIM card. You can also access the setup guide later from the Settings menu. To set the language 1 Scroll through the available languages list. 2 Tap the language you want to use in your phone. The language is marked. 3 Tap Save. If you choose the wrong language and cannot read the menu texts, go to www.sonyericsson.com/support for help. Internet and messaging settings To send text and multimedia messages and to access the Internet, you must have a 2G/3G mobile data connection 6 July 22, 2010 23:19:45 and the correct settings. There are different ways to get these settings: • For most mobile phone networks and operators, Internet and messaging settings come preinstalled on your phone. You can then start using the Internet and send messages right away. • In some cases you will get the option to download Internet and messaging settings the first time you turn on your phone. It is also possible to download these settings later from the Settings menu. • You can manually add and change Internet and network settings in your phone at any time. Contact your network operator for detailed information on your Internet and messaging settings. To import contacts from the SIM card When you copy contacts from a phone to a SIM card, the amount and the type of information you can transfer for each contact is limited. To get more help on how to copy contacts between two phones, go to www.sonyericsson.com/support from your computer. 1 When you start your phone for the first time, the setup wizard prompts you to import your SIM contacts. Tap Import contacts. 2 When you are asked to confirm if you want to import your contacts from the SIM card to the phone, tap Yes. To set the time and date 1 From the setup guide, tap Time & date. 2 Unmark the Automatic checkbox, if it is marked. 3 Tap Set date or Set time. 4 Tap or to adjust the date or hour and minute. 7 July 22, 2010 23:19:45 Home screen The Home screen is the starting point of your phone. You can personalise the Home screen by adding widgets, or by changing the wallpaper and the applications in the corners. A widget is a part of an application on the Home screen. It displays important information from a particular application. For example, the Sony Ericsson Timescape™ widget displays incoming messages and the Media widget allows you to start playing music directly. JJanuaJanuary7, 27701000 To view the extended Home screen • Drag your finger to the sides of the screen. To change the Home screen wallpaper 1 Press . 2 Tap Change wallpaper. 14 July 22, 2010 23:19:46 To charge the phone using a computer 1 Connect the phone to a USB port on a computer using the USB cable included in the phone kit. 2 Tap Charge phone. Using the hardware keys Menu • Open a list of options available in the current screen or application Home • Go to the Home screen or to the applications panes from any application or screen • Open the r…

Text truncated - open the document above for the full version.

---------------------------- Sony Ericsson Confidential 1(1) Document number Revision CWA10:334 A Prepared by Date SEMC/CWALG Afrah Sadiq + 46108012250 2010-08-09 Contents responsible if other lhan preparer Remarks Approved by SEMC/CVVALG Johan Wedin Svensk tel +46108011987 Receiver: Federal Communication Commission and Certification and Engineering Bureau Industry Canada Application Type number: AAO-3880092-BV, FCC 10: PY7A3880092, Canada IC: 4170B-A3880092 Statement on WLAN hardware Sony Ericsson mobile phone E15a (FCC ID PY7A3880092, IC: 4170B-A3880092) uses the exact same WLAN hardware and software as E15i (FCC ID PY7A3880091, IC: 4170B-A3880091 ). Based on this, FCC part 15.247 and RSS -210 Issue 7 report (report no. 1-1954-31­ 06/10_E, dated 2010-07-20) issued for E15i also applies for E15a. Best regards, Johan Wedin Svensk Manager GSM/UMTS Sony Ericsson Mobile Communications (Sweden)AB Sony Ericsson Mobile Communications AS Styrelsens sate: Lund Momsnr. VA. TNo: SE556615665801 Registered office: Lund Organisationsnr. Reg No: 556615-6658 Postadress • Mail Besbksadress • Office address Telefon • Telephone Telefax • Telefax SE-221 88 Lund Nya Vattentornet Nat 010-80 00000 Nat 010-80 02040 Sweden Lund Int +46 10 80 00000 Int +46 10 80 02040

Sony Ericsson Confidentiality Request 2010-08-09 CVVA10:330 SEMC/CVVALE Afrah Sadiq +46 108012250 Receiver Federal Communications Commission Subject: Request for Confidentiality FCC ID: PY7A3880092 To Whom It May Concern: In accordance with §0.459 of CFR 47, Sony Ericsson Mobile Communications AS requests confidentiality for the below listed items for our mobile phone type AAD­ 3880092-BV, FCC 10: PY7A3880092: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational/Technical Descriptions These items contain detailed system and equipment description and related information about the product which Sony Ericsson Mobile Communications AS considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Ericsson Mobile Communications AS also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Best Regards, Afrah Sadiq Development Engineer - Global Type Approval Sony Ericsson Mobile Communications AB Sony Ericsson Mobile Communications AB Styrelsens sate: Lund Momsnr. II.A. rNo: SE556615665801 Registered office: Lund Organisationsnr. Reg No: 556615-6658 Postadress • Mail Besoksadress • Office address Telefon • Telephone Telefax • Telefax SE-221 88 Lund Nya Valtentornet Nat 010-80 00000 Nat 010-80 02040 Sweden Lund Int +46 10 80 00000 Int +4610 80 02040

Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 23 of 39 An ne x B Ex te rna l P ho to gra phs o f the E UT Photo documentation: Photo 1: Photo 2: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 24 of 39 Photo 3: Photo 4: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 25 of 39 Photo 5: Photo 6:

Company Internal MARKING DRAWING 1 ( 4) Prepared (also subject responsible if other) No. SEM/CVVGP, Leif Hedin 1237-0269 Uen Approved Checked Date Rev Reference SEM/CVVGP, Leif Hedin 2010-06-28 1 2 E15a, Mobile Phone label content, a-version, Made in... 1 General information Mobile Phone label part no  1230-8964 Mobile Phone label content part no  1237-0268 Bar code  Print quality: according to COSMETIC GUIDELINE – Bar code labels document 1222-6072 Uen  Quiet zone: No bar codes are allowed to be closer to a label edge than 2 mm! Text If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. Coordinates “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. 2 Printing information Content Format Line 1 (9,5/22,0) SIM-card logo Graphics height 7,0mm acc to 1001-6195 Line 2a (11,0/4,0) Sony Ericsson stylized name. Graphics, height 1,5 mm. According to 1200-1925 Line 2b (11,0/18,0) Model Name “E15a” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 3 (13,0/4,0) Product number of the Sales Item in which the phone is packed, if applicable. “SI XXXX-XXXX” Text, height 1,2 mm. Line 4a (15,0/4,0) “TYPE: AAD-3880092-BV” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 4b (15,0/20,0) HW & SW identification field, if applicable; “FFGG” Text, height 1,2 mm. According to Type-testing report under Product Model Specifying Documents Line 5a (17,0/4,0) ”FCC ID: PY7A3880092” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 5b (17,0/20,0) Repair week, if applicable. “Ryy’W’ww” (y = year, ww = week) Text, height 1,2 mm. Line 6a (19,0/4,0) “IC: 4170B-A3880092” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 6b (19,0/20,0) Location code of where the phone is flashed, if applicable, “XXX” Text, height 1,2 mm Company Internal MARKING DRAWING 2 (4) Prepared (also subject responsible if other) No. SEM/CVVGP, Leif Hedin 1237-0269 Uen Approved Checked Date Rev Reference SEM/CVVGP, Leif Hedin 2010-06-28 1 2 Line 6c (19,0/24,0) Production week (flash), “yy’W’ww” (yy = year, ww = week Text, height 1,2 mm. Line 7 (21,0/4,0) Line 7 in bar code, according to line 8a. As desired by supplier (e.g. only actual number). Bar code, height 2,0 mm. As desired by supplier (e.g. Code 128 symbology). Line 8a (23,0/4,0) Supplier’s identification for trace-ability of the telephone, as desired by supplier (e.g. “S/N: nnn....” for serial number). Text, height 1,2 mm. Defined by supplier. Line8b (23,0/17,0) Actual electronic serial number (IMEI) of the mobile phone, “00000000-000000-0” Text, height 1,2 mm. In the format TAC-SNR-CD. TAC and SNR derived from pos 500 in BOM. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 9 (25,0/4,0) Line 9 in bar code, according to line 8b (only actual number, without data identifier). Bar code, height 2,0 mm. Code 128 symbology, code C subset. If uneven number of digits, code B subset shall be used for the last digit. Line 10 (27,0/4,0) Marking of origin. “Made in Xxx”; “Xxx” = actual country of production of the included telephone, in English Text, height 1,2 mm. Line 11a (33,0/4,0) CE approval symbol Graphics, height 5 mm. According to 1210-0131. Line 11b (33,0/12,2) The notified body number “0682” Text, height 5 mm. Line 11c (33,0/26,5) “Alert Symbol” Graphics, height 5 mm According to 1001-5859 Line 11d (33,0/35,5) WEEE trashcan without bar symbol Graphics, min. height 5mm, according to 1202-5537. Company Internal MARKING DRAWING 3(4) Prepared (also subject responsible if other) No. SEM/CVVGP, Leif Hedin 1237-0269 Uen Approved Checked Date Rev Reference SEM/CVVGP, Leif Hedin 2010-06-28 1 2 3 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 3.1 Conceptual picture double underlined = major changes since last revision. Company Internal MARKING DRAWING 4(4) Prepared (also subject responsible if other) No. SEM/CVVGP, Leif Hedin 1237-0269 Uen Approved Checked Date Rev Reference SEM/CVVGP, Leif Hedin 2010-06-28 1 6 Label placement To find the label follow these steps: 1. Remove the cover on the rear side of the product. 2. Remove the battery. 3. The label is located behind the battery. Rear side of the phone Place for battery Label placement

Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 26 of 39 Photo 7: Photo 8: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 27 of 39 Photo 9: Photo 10: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 28 of 39 Photo 11: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 29 of 39 An ne x C Inte r na l Ph o tog ra phs o f the E UT Photo documentation: Photo 1: Photo 2: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 30 of 39 Photo 3: Photo 4: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 31 of 39 Photo 5: Photo 6: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 32 of 39 Photo 7: Photo 8: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 33 of 39 Photo 9: Photo 10: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 34 of 39 Photo 11: Photo 12: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 35 of 39 Photo 13: Photo 14: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 36 of 39 Photo 15: Photo 16: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 37 of 39 Photo 17: Photo 18: Annex to Test Report No.: 1-1954-32-02/10 2010-06-30 Page 38 of 39 Photo 19:

Company Internal REPORT 1 (19) Prepared (also subject responsible if other) No. LD/SEMC/CVVBALE Kent Lorentzon CVVA10:305 Approved Checked Date Rev Reference BA/SEMC/CVVBAU Jon Kenny JK 100714 A File Report issued by Accredited SAR Laboratory for FCC ID: PY7A3880092 IC: 4170B-A3880092 Date of test: 2010-07-05 to 2010-07-14 Laboratory: Sony Ericsson SAR Test Laboratory Sony Ericsson Mobile Communications AB Nya Vattentornet SE-221 88 Lund, Sweden Testing Engineer: Kent Lorentzon [email protected] +46 10 80 19043 Testing Approval: Jon Kenny [email protected] +44 1252 55 5711 Statement of Compliance Sony Ericsson Mobile Communications AB declares under its sole responsibility that the product Sony Ericsson Type AAD-3880092-BV; FCC ID PY7A3880092; IC 4170B-A3880092 to which this declaration relates, is in conformity with the appropriate RF exposure standards recommendations and guidelines. It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (None) This laboratory is accredited to ISO/IEC 17025 (SWEDAC accreditation no. 1847). Laboratories are accredited by the Swedish Board for Accreditation and Conformity Assessment (SWEDAC) under the terms of Swedish legislation. The accredited laboratory activities meet the requirements in SS-EN ISO/IEC 17025 (2005). This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Sony Ericsson encourages all feedback, both positive and negative, on this report. © Sony Ericsson Mobile Communication AB, 2010 Company Internal REPORT 2 (19) Prepared (also subject responsible if other) No. LD/SEMC/CVVBALE Kent Lorentzon CVVA10:305 Approved Checked Date Rev Reference BA/SEMC/CVVBAU Jon Kenny JK 100714 A File Table of contents 1 INTRODUCTION .................................................................................................................................................................. 3 2 CUSTOMER DETAILS ........................................................................................................................................................ 3 3 DEVICE UNDER TEST ........................................................................................................................................................ 3 3.1 ANTENNA DESCRIPTION ................................................................................................................................................... 3 3.2 DEVICE DESCRIPTION ...................................................................................................................................................... 4 3.3 HSPA POWER CHARACTERISTICS ................................................................................................................................... 6 4 TEST EQUIPMENT .............................................................................................................................................................. 8 4.1 DOSIMETRIC SYSTEM ....................................................................................................................................................... 8 4.2 ADDITIONAL EQUIPMENT ................................................................................................................................................. 8 5 ELECTRICAL PARAMETERS ON THE TISSUE SIMULATING LIQUID .............................................................. 9 6 SYSTEM ACCURACY VERIFICATION ........................................................................................................................ 10 7 SAR MEASUREMENT UNCERTAINTY ....................................................................................................................... 11 8 TEST RESULTS .................................................................................................................................................................. 12 9 REFERENCES ..................................................................................................................................................................... 15 APPENDIX .................................................................................................................................................................................... 16 9.1 PHOTOGRAPHS OF THE DEVICE UNDER TEST .................................................................................................................. 16 9.2 DEVICE POSITION AT SAM TWIN PHANTOM ................................................................................................................. 17 9.3 ATTACHMENTS ............................................................................................................................................................... 19 Company Internal REPORT 3 (19) Prepared (also subject responsible if other) No. LD/SEMC/CVVBALE Kent Lorentzon CVVA10:305 Approved Checked Date Rev Reference BA/SEMC/CVVBAU Jon Kenny JK 100714 A File 1 Introduction In this test report, compliance of the Sony Ericsson FCC ID: PY7A3880092 (E15a) portable telephone with RF safety guidelines is demonstrated. The applicable RF safety guidelines and the SAR measurement specifications used for the test are described in the SAR Measurement Specifications of Wireless Handsets [1]. 2 Customer details Company Name: Sony Ericsson Mobile Communications AB Address: Sony Ericsson, Lund, Sweden Contact Name: Adam Al-Mosawi 3 Device Under Test 3.1 Antenna Description Type Internal antenna Location Bottom of the phone Main and BT antennas distance 50 mm Dimensions Max l…

Text truncated - open the document above for the full version.

2010-07-20 Page 1 of 70 TEST REPORT Test Report No.: 1-1954-31-06/10-E Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Area of Testing: Radio Satellite Communications Sony Ericsson Mobile Communications AB Nya Vattentornet 22188 Lund/Sweden Phone: +46 46 19 30 00 Fax: +46 46 19 32 95 Contact: Johan Wedin e-mail: [email protected] Phone: +46 707 19 57 36 Manufacturer Sony Ericsson Mobile Communications AB Nya Vattentornet 22188 Lund/Sweden Test Standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission subchapter A - general, Part 15-Radio frequency devices RSS - 210 Issue 7 Spectrum Management and Telecommunications - Radio Standards Specification Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Mobile Phone 850/900/1800/1900/UMTS /HSDPA /HSUPA/ BT2.0+EDR, A-GPS, FM Rx, WLAN Model name: AAD-3880091-BV FCC ID: PY7A3880091 IC: 4170B-A3880091 Frequency [MHz]: 2400 MHz – 2483.50 MHz Power supply: 3.70V DC by Li-Polymer Battery (EP500) Temperature range: 22 °C Test performed: Test Report authorised: 2010-07-20 Jakob Reschke 2010-07-20 Stefan Bös Test report no.: 1-1954-31-06/10-E 2010-07-20 Page 2 of 70 1 Table of contents 1 Table of contents............................................................................................................................................2 2 General Information .......................................................................................................................................3 2.1 Notes.....................................................................................................................................................3 2.2 Application details...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test Environment ...........................................................................................................................................3 5 Test item ..........................................................................................................................................................4 6 Test Laboratories sub-contracted ................................................................................................................4 7 Summary of measurement results ...............................................................................................................5 8 RF measurement testing ...............................................................................................................................6 8.1 Description of test setup ....................................................................................................................6 8.1.1 Radiated measurements.............................................................................................................6 8.1.2 Conducted measurements..........................................................................................................7 8.2 Additional comments ..........................................................................................................................7 8.3 Additional EUT information for IC Canada (Appendix 2) ................................................................8 9 Measurement Results ....................................................................................................................................9 9.1 Maximum Output Power (conducted)................................................................................................9 9.2 Antenna Gain .....................................................................................................................................10 9.3 Power Spectral Density.....................................................................................................................11 9.4 Spectrum Bandwidth of a FHSS System – 6 dB Bandwidth .........................................................15 9.5 Spectrum Bandwidth of a FHSS System – 20 dB Bandwidth .......................................................19 9.6 Maximum Output Power ...................................................................................................................23 9.7 Band Edge Compliance Conducted ................................................................................................28 9.8 Band Edge Compliance Radiated ....................................................................................................31 9.9 TX Spurious Emissions Conducted ................................................................................................34 9.10 TX Spurious Emissions Radiated ................................................................................................39 9.11 RX Spurious Emissions Radiated ................................................................................................48 9.12 TX Spurious Emissions Radiated < 30 MHz ................................................................................53 9.13 TX Spurious Emissions Conducted < 30 MHz ............................................................................55 10 Test equipment and ancillaries used for tests ...................................................................................58 Annex A Ph…

Text truncated - open the document above for the full version.

Test report no.: 1-1954-31-06/10-E 2010-07-20 Page 60 of 70 Annex A Photographs of the Test Setup Photo documentation Photo 1: Test report no.: 1-1954-31-06/10-E 2010-07-20 Page 61 of 70 Photo 2: Photo 3: Test report no.: 1-1954-31-06/10-E 2010-07-20 Page 62 of 70 Photo 4: