PY7AF061011PCS HAC Mobile Phone

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 25 of 41 6 Annex C: External Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 26 of 41 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 27 of 41 Photo 3: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 28 of 41 Photo 4:

Limited Internal MARKING DRAWING 1 (3) Prepared (also subject responsible if other) No. SEM/BGRRP MICHAEL FRINK 1/151 86 – DPY 101 2890 Approved Checked Date Rev Reference SEM/BGRRP (MICHAEL FRINK) 25 Aug 05 B Approved according to: 000 21 – LXE 107 42/1 Type AAF-1061011-BV. Label The label used for marking is defined in the Manufacturing Specification on the SVF 930 361/1. Placing The label shall be placed on the back of the telephone as shown across. Print layout Sony Ericsson trademark Model Number DPY number, r-state/variant Type number G H Y1 field Country approval mark 1 Country approval mark 2 IMEI-numbers as barcode IMEI-numbers as characters Serial number as barcode Serial number as characters Marking of Origin Production Week Repair Code CE Marking Definitions: Sony Ericsson trademark Sony Ericsson trademark shall be according to the corporate standard 190 89-EN/LZT 108 5347. Model number The model number is Z502a and shall be printed “Model : Z502a” DPY product number & r-state/variant The product number of the DPY including the R- state of the file, eg. DPY 2890/XX RXX Type number Print : “Type number: AAF-1061011-BV” G – Field R-State identification of the CXC-module according to the Marking Data 1/151 86 for the KRH H-field R-state identification of the KRH according to the Marking data 1/151 86 for the KRH. Y 1 -field R-state identification of the ROA according to the Marking data 1/151 86 for the KRH. Country approval mark 1 Consist of text: FCC:PY7AF061011 Within a frame with height > 1,5 mm. Country approval mark 2 Consist of text: IC:4170B-AF061011 Limited Internal MARKING DRAWING 2 (3) Prepared (also subject responsible if other) No. SEM/BGRRP MICHAEL FRINK 1/151 86 – DPY 101 2890 Approved Checked Date Rev Reference SEM/BGRRP (MICHAEL FRINK) 25 Aug 05 B IMEI number as bar code See below for definition of IMEI-number. The bar code shall only contain the digits of the IMEI number IMEI number as characters Actual electronic serial number (IMEI) of the phone (KRH), “00000000-000000-0” In the format TAC-SNR-CD. TAC and SNR derived from the 1/151 86- document in the 1095- for the KRH. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16.. Serial number as bar code According to Ericsson corporate standard 102 01 – 109. Serial number as characters According to Ericsson group standard 0012-101. Ericsson group factory number system according the Ericsson corporate standard 1120-101 Production week (Prod wk) The production week shall be given as yyWww (yy = year, ww = week) according to the ISO 8601 standard. Repair code Six character code to identify repair data; four characters for date code followed by a two character repair code. “Manufacturing” will NOT be using this space; populated ONLY after completion of repairs and “RELABELING ”, when required. Marking of origin “Made in” statement should reflect the country of origin of the DPY (i.e. Made in Malaysia). Approval Marks (CE Marking) 1. According to 1424 - SVF 930 52 2. The notified body number from the type approval certificate, 0682. The print size (height) for the notified body number (e.g. 0682) and the corresponding approval marks shall be minimum 5 mm. This is a regulatory requirement. Limited Internal MARKING DRAWING 3 (3) Prepared (also subject responsible if other) No. SEM/BGRRP MICHAEL FRINK 1/151 86 – DPY 101 2890 Approved Checked Date Rev Reference SEM/BGRRP (MICHAEL FRINK) 25 Aug 05 B Print regulations The printing shall be well readable and permanent. Typeface OCR-B Type size min 1.1 mm Line spacing min 1.5 mm Trademark min 1.5 mm Document History Rev. Date Created (not released date) Detailed Changes (BOLD) A 26 April 2005 1. Initial Release B 25 August 2005 2. Correct FCC ID and change CAN to IC.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 29 of 41 7 Annex D: Internal Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 30 of 41 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 31 of 41 Photo 3 CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 32 of 41 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 33 of 41 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 34 of 41 Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 35 of 41 Photo 7: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 36 of 41 Photo 8: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 37 of 41 Photo 9: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 38 of 41 Photo 10: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 39 of 41 Photo 11: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 40 of 41 Photo 12: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Annex to Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 41 of 41 Photo 13:

APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 1(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Exhibit 11: SAR Test Report of Portable Cellular Phone FCC ID: PY7AF061011 Model :Z502A Date of test: Date of Report: June 22- July 29, 2004 March 17, 2005 Laboratory:SAR Testing Laboratory Sony Ericsson Mobile Communications, Inc.7001 Development Drive, P.O. Box 13969, Research Triangle Park, NC, 27709, USA Tested by: Rodney Dixon Technician III, Product Verification Group Test Responsible: Gerard Hayes Consulting Engineer, Antenna/RF Development Group Accreditation: This laboratory is accredited to ISO/IEC 17025-1999 to perform the following electromagnetic exposure tests: Specific Absorption Rate (SAR) Dielectric parameters RF power measurement On the following types of products: Wireless communications devices.A2LA certificate #1650-01 Statement of Compliance: Sony Ericsson Mobile Communications, Inc declares under its sole responsibility that portable cellular telephone FCC IDPY7AF061011modelZ502A to which this declaration relates, is in conformity with the appropriate General Population/Uncontrolled RF exposure standards, recommendations and guidelines (FCC 47 CFR §2.1093). It also declares that the product was tested in accordance with the appropriate measurement standards, guidelines and recommended practices. Any deviations from these standards, guidelines and recommended practices are noted below: (none) © Sony Ericsson Mobile Communications, Inc. 2005 This test report shall not be reproduced except in full, without written approval of the laboratory. The results and statements contained herein relate only to the items tested. The names of individuals involved may be mentioned only in connection with the statements or results from this report. Sony Ericsson Mobile Communications encourages all feedback, both positive and negative, on this test report. APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 2(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Table of Contents 1. Introduction3 2. Description of the Device Under Test3 2.1 Antenna description3 2.2 Device description3 3. Test Equipment Used4 3.1 Dosimetric System4 3.2 Additional Equipment4 4. Electrical parameters of the tissue simulating liquid5 5. System Accuracy Verification6 6. Test Res ults7 6.1 Head Adjacent Test Results7 6.2 Body-Worn Test Results12 References16 Appendix 1: SAR distribution comparison for system accuracy verification17 Appendix 2: SAR distribution plots for Phantom Head Adjacent Use24 Appendix 3: SAR distribution plots for Body Worn Configuration41 Appendix 4: Probe Calibration Certificate58 Appendix 5: Measurement Uncertainty Budget69 Appendix 6: Photographs of the device under test79 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 3(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 1.Introduction The Sony Ericsson SAR Laboratory has performed measurements of the maximum potential exposure to the user of portable cellular phone FCC IDPY7AF061011modelZ502A . The Specific Absorption Rate (SAR) of this product was measured. The applicable RF safety guidelines and the SAR measurement specifications used for the test are described in [1]. 2.Description of the Device Under Test 2.1Antenna description TypeInternal antenna LocationInside the lowerback cover, near the hinge Width35 mm Length15 mm Dimensions Height10mm ConfigurationPIFA -Type Antenna 2.2Device description FCC ID Number / Device ModelPY7AF061011 / Z502A Serial numberBD3017AYMN Mode(s) of OperationGSM 1900 Modulation Mode(s)TDMA f low 29.7± 0.3 dBm f mid 29.5± 0.5 dBm Target Value and Factory Tolerance Window for Maximum Output Power Setting f high 29.2± 0.8 dBm Calibration Frequency (f low , f mid , f high )f low Duty Cycle 1/8 GSM 2/8 EGPRS (Data) Transmitting Frequency Rang(s)1850-1910 MHz Production Unit or Identical Prototype (47 CFR §2..908) Identical Prototype Model:Z500A(FCC ID: PY7AF031011) without GSM-850 operation. Device CategoryPortable RF Exposure LimitsGeneral Population / Uncontrolled APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 4(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 3.Test Equipment Used 3.1Dosimetric System The Sony Ericsson SAR Laboratory utilizes Dosimetric Assessment Systems (Dasy3™ v3.1dfor body-worn measurements and Dasy4™ for adjacent to head measurements) manufactured by Schmid & Partner Engineering AG (SPEAG™), of Zurich Switzerland. The overall RSS uncertainty of the measurement system is ±11.33% (K=1) with an expanded uncertainty of ±22.67% (K=2) for Dasy3™ v3.1d and ±10.14% (K=1) with an expanded uncertainty of ±20.27% (K=2) for Dasy4™. The measurement uncertainty budget is given in Appendix 5 for both systems . The list of calibrated equipment used for the measurements is shown in the following table. DescriptionSerial NumberCal Due Date DASY3 DAE V141510-Dec-2004 DASY3 DAE V141710-Dec-2004 DASY3 DAE V143126-Nov-2004 DASY3 DAE V143224-Nov-2004 E-Field Probe ETDV6153827-May-2005 E-Field Probe ETDV6153916-Dec-2004 E-Field Probe ETDV6158316-Dec-2004 E-Field Probe ETDV6158627-May-2005 Dipole Validation Kit, DV1900V253621-Jan-2005 S.A.M. Phantom used for …

Text truncated - open the document above for the full version.

APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 24(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Appendix 2 SAR distribution plots for Phantom Head Adjacent Use APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 25(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 1900 GSM Band: Distribution and Extrapolation of Maximum SAR Model:Z502A SN: BD3017AYMN with Standard Battery: BST-35 Right Side, Cheek/Touch Position. Date/Time: 06/21/04 12:47:55 File Name: 21June04_Z502A_GSM1900_AYMN_RC01.da4 Program Notes: Battery BST-35 Humidity: 41.9 Ambient Temp: 22.5 Simulant Temp: 21.7 Communication System: DCS 1900; Frequency: 1850.2 MHz; Duty Cycle: 1:8.3 Medium: Head 1800/1900 MHz Medium parameters used (interpolated): f = 1850.2 MHz; s = 1.37 mho/m; e r = 39.9; ? = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6 - SN1586; ConvF(5.14, 5.14, 5.14); Calibrated: 5/27/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn432; Calibrated: 5/24/2004 - Phantom: SAM with CRP (High Band Head); Type: SAM; Serial: TP: 1054 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 Area Scan (51x81x1):Measurement grid: dx=15mm, dy=15mm Reference Value = 26.2 V/m; Power Drift = -0.1 dB Maximum value of SAR (interpolated) = 1.3 mW/g Zoom Scan (7x7x7)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.2 V/m; Power Drift = -0.1 dB Maximum value of SAR (measured) = 1.47 mW/g Peak SAR (extrapolated) = 2.2 W/kg SAR(1 g) = 1.29 mW/g; SAR(10 g) = 0.673 mW/g Zoom Scan (31x31x36)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.2 V/m; Power Drift = -0.1 dB Maximum value of SAR (interpolated) = 2.2 mW/g APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 26(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 0 dB = 2.2mW/g APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 27(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 1900 GSM Band: Distribution and Extrapolation of Maximum SAR Model:Z502A SN: BD3017AYMN with Standard Battery: BST-35 Right Side, Tilt Position. Date/Time: 06/21/04 11:32:29 File Name: 21June04_Z502A_GSM1900_AYMN_RT01.da4 Program Notes: Battery BST-35 Humidity: 40.9 Ambient Temp: 23.6 Simulant Temp: 21.8 Communication System: DCS 1900; Frequency: 1880 MHz; Duty Cycle: 1:8.3 Medium: Head 1800/1900 MHz Medium parameters used: f = 1880 MHz; s = 1.4 mho/m; e r = 39.7; ? = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6 - SN1586; ConvF(5.14, 5.14, 5.14); Calibrated: 5/27/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn432; Calibrated: 5/24/2004 - Phantom: SAM with CRP (High Band Head); Type: SAM; Serial: TP: 1054 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 Area Scan (51x81x1):Measurement grid: dx=15mm, dy=15mm Reference Value = 9.63 V/m; Power Drift = -0.0 dB Maximum value of SAR (interpolated) = 0.221 mW/g Zoom Scan (7x7x7)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.63 V/m; Power Drift = -0.0 dB Maximum value of SAR (measured) = 0.224 mW/g Peak SAR (extrapolated) = 0.302 W/kg SAR(1 g) = 0.205 mW/g; SAR(10 g) = 0.129 mW/g Zoom Scan (31x31x36)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.63 V/m; Power Drift = -0.0 dB Maximum value of SAR (interpolated) = 0.302 mW/g APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 28(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 0 dB = 0.302mW/g APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 29(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 1900 GSM Band: Distribution and Extrapolation of Maximum SAR Model:Z502A SN: BD3017AYMN with Standard Battery: BST-35 Left Side, Cheek/Touch Position. Date/Time: 06/21/04 08:41:22 File Name: 21June04_Z502A_GSM1900_AYMN_LC01.da4 Program Notes: Battery BST-35 Humidity: 43.9 Ambient Temp: 23.5 Simulant Temp: 21.7 Communication System: DCS 1900; Frequency: 1850.2 MHz; Duty Cycle: 1:8.3 Medium: Head 1800/1900 MHzMedium parameters used (interpolated): f = 1850.2 MHz; s = 1.37 mho/m; e r = 39.9; ? = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6 - SN1586; ConvF(5.14, 5.14, 5.14); Calibrated: 5/27/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn432; Calibrated: 5/24/2004 - Phantom: SAM with CRP (High Band Head); Type: SAM; Serial: TP: 1054 - Measurement SW: DASY4, V4.2 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 112 Area Scan (51x81x1):Measurement grid: dx=15mm, dy=15mm Reference Value = 27.4 V/m; Power Drift = -0.1 dB Maximum value of SAR (interpolated) = 1.42 mW/g Zoom Scan (7x7x7)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference …

Text truncated - open the document above for the full version.

APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 58(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Appendix 4 Probe Calibration Certificates APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 59(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 60(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 61(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 62(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 63(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 64(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 65(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 66(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 67(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 68(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 69(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Appendix 5 Measurement Uncertainty Budget APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 70(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 Table 1 a. Uncertainty Budget for System Performance Check (Dipole & flat phantom) DASY3 System abcd e = f(d,k) fg h = c x f / e i = c x g / e k Uncertainty Component Sec. Tol. (± %) Prob . Dist. Div. c i (1-g) c i (10-g) 1-g u i (±%) 10-g u i (±%) v i Measurement System Probe Calibration (k=1)E2.14.8N1114.84.8∞ Axial IsotropyE.2.24.7R1.730.7070.7071.91.9∞ Hemispherical IsotropyE.2.29.6R1.730.7070.7073.93.9∞ Boundary EffectE.2.38.3R1.73114.84.8∞ LinearityE.2.44.7R1.73112.72.7∞ SystemDetection LimitsE.2.51.0R1.73110.60.6∞ Readout ElectronicsE.2.61.0N1111.01.0∞ Response TimeE.2.70.0R1.73110.00.0∞ Integration Time E.2.80.0R1.73110.00.0∞ RF Ambient Conditions E.6.13.0R1.73111.71.7∞ Probe Positioner Mechanical Tolerance(corresponds to the mechanical constrains of the robot) E.6.20.4R1.73110.20.2∞ P P r r o o b b e e P P o o s s i i t t i i o o n n i i n n g g w w i i t t h h r r e e s s p p e e c c t t t t o o P P h h a a n n t t o o m m S S h h e e l l l l E.6.32.9R1.73111.71.7∞ Extrapolation, interpolation and Integration Algorithms for Max. SAR Evaluation E.53.9R1.73112.32.3∞ Dipole Dipole Axis to Liquid Distance8, E.4.21.0R1.73110.60.6∞ Input Power and SAR Drift Measurement 8, 6.6.25.0R1.73112.92.9∞ Phantom and Tissue Parameters Phantom Uncertainty - shell thickness tolerance E.3.14.0R1.73112.32.3∞ Liquid Conductivity - deviation E.3.24.3R1.730.640.431.591.07∞ APPLICANT: Sony Ericsson Mobile Communications Inc.FCC ID: PY7AF061011 REPORT 71(87) Prepared (also subject responsible if other)No. SEM/CV/PF/PGerard Hayes REP 2004 001Z502A 02 ApprovedChecked SEM/CV/PF/PGerard HayesA X:\SAR Chamber \FCC reports\Z502A\Final Reports\FCCZ502A.doc E E E x x h h i i b b i i t t 1 1 1 1 from target values (5) Liquid Conductivity - measurement uncertainty (6) E.3.36.20…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4072-01-02/05 Date: 2005-08-25 Page 1 of 54 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463 (IC) TCB ID: BE 0012 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report No. : 2-4072-01-02/05 Applicant : Sony Ericsson Mobile Communications AB Type : AAF-1061011-BV Test Standard : FCC Part 24 RSS 133 FCC ID : PY7AF061011 Certification No. IC : 4170B-AF061011 CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report No.: 2-4072-01-02/05 Date: 2005-08-25 Page 2 of 54 Table of contents 1 GENERAL INFORMATION ................................................................................................................................... 3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.2. NOTES................................................................................................................................................................... 3 1.3 DETAILS OF APPLICANT......................................................................................................................................... 4 1.4 APPLICATION DETAILS.......................................................................................................................................... 4 1.5 TEST ITEM............................................................................................................................................................. 5 1.6 TEST SETUP........................................................................................................................................................... 6 1.7 TEST STANDARDS.................................................................................................................................................. 6 2 STATEMENT OF COMPLIANCE .......................................................................................................................... 7 2.1 SUMMARY OF MEASUREMENT RESULTS................................................................................................................ 7 2.1.1 PCS 1900 ...................................................................................................................................................... 7 3 MEASUREMENTS AND RESULTS ....................................................................................................................... 8 3.1 PART PCS 1900 ................................................................................................................................................... 8 3.1.1 RF Power Output .......................................................................................................................................... 8 3.1.2 Frequency Stability..................................................................................................................................... 12 3.1.3 Radiated Emissions..................................................................................................................................... 15 3.1.4 Receiver Radiated Emissions ...................................................................................................................... 25 3.1.6 Block Edge Compliance ............................................................................................................…

Text truncated - open the document above for the full version.