PY7FD022011Licensed Transmitter

1(1) Document number Revision BGGIN06:143 A Prepared by Date BGGINK Lennart Skoglund 2006-05-05 Contents responsible if other than preparer Remarks Approved by BGGINK Kenth Skoglund Reference POWER OF ATTORNEY To whom it may concern: The following organisation is granted authority to act on Sony Ericsson Mobile Communications AB’s behalf, to file technical reports, measurements and forms for Sony Ericsson Mobile Communication mobile phone with the FCC ID: PY7FD022011 as it applies for a new equipment grant. CETECOM GmbH Im Teelbruch 122 45219 Essen, Germany We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. Further, no party as defined in 47CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Sincerely Lennart Skoglund

Re: FCC ID PY7FD022011 Applicant: Sony Ericsson Mobile Communications AB Correspondence Reference Number: 31069 1) If not in filing already, please state GPRS mobile station class (A, B, C) - if class A please submit multislot-operation SAR data for head positions. Answer: The device has GPRS class B implemented. The revised SAR report reflects this information 2) SAR report says procedures from draft IEC 62209-2 were used; as we understand that draft includes various multi-mode SAR methods. If not in filing already, please explain which of these methods were applied here and how. Answer: please refer to the revised SAR report see page 8 (15) § 8.6. "Alternative 1" was used 3) SAR report does not seem to include all info specified by OET 65 Supplement C Appendix B. II., including by maybe not limited to: measurement uncertainty details, system verification plot(s). Please revise filing to bring into accordance with Suppl. C. Answer: A revised SAR report has been uploaded.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 48 of 60 5 Annex C: External Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 49 of 60 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 50 of 60 Photo 3: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 51 of 60 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 52 of 60 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 53 of 60 Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 54 of 60 Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 55 of 60 6 Annex D: Internal Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 56 of 60 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 57 of 60 Photo 3: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 58 of 60 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 59 of 60 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 60 of 60 Photo 6:

Company Internal MARKING DRAWING 1 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 Hermione, KRH-label, TYPE: FAD-3022011-BV, Made in... 1 General information The format of the label is based on a label SVF 930 863 (33,0 x 20,0 mm). If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. All bar codes, when applicable, are according to Ericsson corporate standard 102 01–109 Uen. All bar codes shall fulfil minimum print quality C according to ANSI X3.182-1990 as stated in Ericsson corporate standard 102 01–1003 Uen. No bar codes are allowed to be closer to a label edge than 2 mm! (quiet zone). “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. The label shall be placed on the back of the telephone according to the Assembly Drawing (151 88-) for the KRH. 2 Printing information Content Format Line 1a (2,5/1,5) Sony Ericsson stylized name. Graphics, height 2,0 mm. According to 190 89–EN/LZT 108 5347 Line 1b (2,5/14,0) Model name, “P990i” Text, height 1,2 mm. Line 1c (2,5/19,0) Country approval mark 2 “IC: 4170B-FD022011” Text, height 1,2 mm. Line 2a (4,5/1,5) Type number of the phone (KRH), “Type: FAD-302 2011-BV”. Text, height 1,2 mm. Line 2b (4,5/16,0) ROA and R-state identification field, “G 1 G 2 G 3 HY 1 Y 2 Y 3 ” Text, height 1,2 mm. “G”, “H” and “Y”-field According to the Type approval report 174 52-SVV 107 311/1. Documents to be found in the 1095- for this SVV. Line 2c (4,5/24,0) Production week (flash), “yy’W’ww” (yy = year, ww = week) Text, height 1,2 mm. Line 3 (7,0/2,0) Line 4a in bar code. As desired by supplier (e.g. only actual number). Bar code, height 2,0 mm. As desired by supplier (e.g. Code 128 symbology). Company Internal MARKING DRAWING 2 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 Line 4a (8,0/1,5) Supplier’s identification for trace- ability of the telephone, as desired by supplier (e.g. “S/N: nnn....” For serial number). Text, height 1,2 mm. Defined by supplier. Line 4b (8,0/14,0) Country approval mark 1 “FCC ID: PY7FD022011” Text, height 1,2 mm. Line 5 (11,0/2,0) Line 6a in bar code (only actual number, without data identifier). Bar code, height 4,0 mm. Code 128 symbology, code C subset. If uneven number of digits, code B subset shall be used for the last digit. Line 6a (12,0/1,5) Actual electronic serial number (IMEI) of the phone (KRH), “00000000-000000-0” Text, height 1,2 mm. In the format TAC-SNR-CD. TAC and SNR derived from the 1301- FAD 109 0104/1 document in the 1095- for the SVV. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 6b (12,0/20,0) Product number of the DPY kit in which the phone is packed. Printed without “DPY 101” and R-state, “0000/000” Text, height 1,2 mm. Line 7a (19,0/2,0) CE approval symbol. Graphics, height 5 mm. According to 1424-SVF 930 52. Line 7b (19,0/8,0) The Notified body number. “0682” Text, height 2,5 mm. Rotated 90° counter clockwise. Line 7c (19,0/9,0) Alert sign Graphics, height 5 mm. According to 1424-SVF 930 2517. Line 8a (12,0/30,0) Location code of where the phone is flashed, if applicable, “FFF” Text, height 1,2 mm. Rotated 90° counter clockwise. Line 8b (9,0/30,0) Repair week, if applicable. “Ry’W’ww” (y = year, ww = week) Text, height 1,2 mm. Rotated 90° counter clockwise. Line 9 (12,0/32,5) Marking of origin. The line shall be printed as stated in chapter 3 in this document. Text, height 1,2 mm. Rotated 90° counter clockwise. Company Internal MARKING DRAWING 3 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 3 Marking of Origin 3.1 Content “Made in Xxx”; “Xxx” = actual country of production of the included telephone, in English 4 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 4.1 Conceptual picture double underlined = major changes since last revision.

Company Internal MARKING DRAWING 1 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 Hermione, KRH-label, TYPE: FAD-3022011-BV, Made in... 1 General information The format of the label is based on a label SVF 930 863 (33,0 x 20,0 mm). If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. All bar codes, when applicable, are according to Ericsson corporate standard 102 01–109 Uen. All bar codes shall fulfil minimum print quality C according to ANSI X3.182-1990 as stated in Ericsson corporate standard 102 01–1003 Uen. No bar codes are allowed to be closer to a label edge than 2 mm! (quiet zone). “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. The label shall be placed on the back of the telephone according to the Assembly Drawing (151 88-) for the KRH. 2 Printing information Content Format Line 1a (2,5/1,5) Sony Ericsson stylized name. Graphics, height 2,0 mm. According to 190 89–EN/LZT 108 5347 Line 1b (2,5/14,0) Model name, “P990i” Text, height 1,2 mm. Line 1c (2,5/19,0) Country approval mark 2 “IC: 4170B-FD022011” Text, height 1,2 mm. Line 2a (4,5/1,5) Type number of the phone (KRH), “Type: FAD-302 2011-BV”. Text, height 1,2 mm. Line 2b (4,5/16,0) ROA and R-state identification field, “G 1 G 2 G 3 HY 1 Y 2 Y 3 ” Text, height 1,2 mm. “G”, “H” and “Y”-field According to the Type approval report 174 52-SVV 107 311/1. Documents to be found in the 1095- for this SVV. Line 2c (4,5/24,0) Production week (flash), “yy’W’ww” (yy = year, ww = week) Text, height 1,2 mm. Line 3 (7,0/2,0) Line 4a in bar code. As desired by supplier (e.g. only actual number). Bar code, height 2,0 mm. As desired by supplier (e.g. Code 128 symbology). Company Internal MARKING DRAWING 2 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 Line 4a (8,0/1,5) Supplier’s identification for trace- ability of the telephone, as desired by supplier (e.g. “S/N: nnn....” For serial number). Text, height 1,2 mm. Defined by supplier. Line 4b (8,0/14,0) Country approval mark 1 “FCC ID: PY7FD022011” Text, height 1,2 mm. Line 5 (11,0/2,0) Line 6a in bar code (only actual number, without data identifier). Bar code, height 4,0 mm. Code 128 symbology, code C subset. If uneven number of digits, code B subset shall be used for the last digit. Line 6a (12,0/1,5) Actual electronic serial number (IMEI) of the phone (KRH), “00000000-000000-0” Text, height 1,2 mm. In the format TAC-SNR-CD. TAC and SNR derived from the 1301- FAD 109 0104/1 document in the 1095- for the SVV. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 6b (12,0/20,0) Product number of the DPY kit in which the phone is packed. Printed without “DPY 101” and R-state, “0000/000” Text, height 1,2 mm. Line 7a (19,0/2,0) CE approval symbol. Graphics, height 5 mm. According to 1424-SVF 930 52. Line 7b (19,0/8,0) The Notified body number. “0682” Text, height 2,5 mm. Rotated 90° counter clockwise. Line 7c (19,0/9,0) Alert sign Graphics, height 5 mm. According to 1424-SVF 930 2517. Line 8a (12,0/30,0) Location code of where the phone is flashed, if applicable, “FFF” Text, height 1,2 mm. Rotated 90° counter clockwise. Line 8b (9,0/30,0) Repair week, if applicable. “Ry’W’ww” (y = year, ww = week) Text, height 1,2 mm. Rotated 90° counter clockwise. Line 9 (12,0/32,5) Marking of origin. The line shall be printed as stated in chapter 3 in this document. Text, height 1,2 mm. Rotated 90° counter clockwise. Company Internal MARKING DRAWING 3 (3) Prepared (also subject responsible if other) No. SEM/BGULD, Mats Hörlin 151 86–SVV 107 311/1 Uen Approved Checked Date Rev Reference SEM/BGULDC (Hans-Olov Hallin) 2006-02-23 PA1 2 3 Marking of Origin 3.1 Content “Made in Xxx”; “Xxx” = actual country of production of the included telephone, in English 4 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 4.1 Conceptual picture double underlined = major changes since last revision. Label Placement

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 48 of 60 5 Annex C: External Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 49 of 60 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 50 of 60 Photo 3: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 51 of 60 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 52 of 60 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 53 of 60 Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 54 of 60 Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 55 of 60 6 Annex D: Internal Photographs of the Equipment Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 56 of 60 Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 57 of 60 Photo 3: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 58 of 60 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 59 of 60 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 60 of 60 Photo 6:

1 (34) EAB-06:018378 Uen, Rev A, 2006-04-26 Report issued by an Accredited Laboratory Rapport utfärdad av ett ackrediterat laboratorium This laboratory is accredited to SS-EN ISO/IEC 17025 (SWEDAC accreditation no. 1761). SAR Test Report: PY7FD022011 Document number: EAB-06:018378 Uen Rev A Date of report: 2006-04-26 Testing laboratory: Ericsson EMF Research Laboratory Ericsson AB Torshamnsgatan 23 SE-164 80 Stockholm Sweden Company/Client: Lars Melin Sony Ericsson Mobile Communications AB Torshamnsgatan 27 Box 64 SE-164 94 Kista Sweden Tests performed by: Martin Siegbahn Date of tests: Jan 13 – Feb 24, Mar 20-22, 2006 Manufacturer and market name(s) of device: Sony Ericsson P990i Testing has been performed in accordance with: IEEE Standard 1528, IEC 62209-1, FCC OET Bulletin 65 Supplement C Test results: The tested device complies with the requirements in respect of all parameters subject to the test. Additional information: This report presents the results for the GSM/GPRS1900, WLAN and Bluetooth modes. The test report EAB-06:010931 contains the results for all the frequency bands and modes used by the tested device. Signature: Test engineer ______________________ Martin Siegbahn Senior Research Engineer [email protected] Tel: +46 8 7570811 Quality manager ______________________ Christer Törnevik Director, EMF Health and Safety [email protected] Tel: +46 8 7641235 2 (34) EAB-06:018378 Uen, Rev A, 2006-04-26 1 Table of Contents 1 Table of Contents ........................................................................................................................2 Test report summary.....................................................................................................................................3 2 General information.....................................................................................................................4 3 Device under test .........................................................................................................................4 4 Test equipment ............................................................................................................................5 4.1 Dosimetric system..................................................................................................................5 4.2 Additional equipment............................................................................................................. 5 5 Electrical parameters of the tissue simulating liquids..................................................................6 6 SAR system performance check ..................................................................................................7 7 Test results...................................................................................................................................8 7.1 Results for the GSM1900 mode (head)..................................................................................9 7.2 Results for the GSM1900 mode (body) ...............................................................................10 7.3 Results for the GPRS(2TX)1900 mode (body) ....................................................................11 7.4 Results for the WLAN mode (head) ....................................................................................12 7.5 Results for the WLAN mode (body)....................................................................................13 7.6 Multi-mode maximum SAR ................................................................................................14 8 Conclusion.................................................................................................................................15 9 References .................................................................................................................................16 APPENDIX 1: Photographs of the DUT ....................................................................................................17 APPENDIX 2: Photographs of the DUT when positioned for SAR measurements ...................................19 APPENDIX 3: SAR distribution plots .......................................................................................................21 APPENDIX 4: Probe calibration parameters for ET3DV6, SN: 1394 .......................................................32 APPENDIX 5: Probe calibration parameters for ET3DV6, SN: 1582 .......................................................33 APPENDIX 6: Probe calibration parameters for ET3DV6, SN: 3062 .......................................................34 3 (34) EAB-06:018378 Uen, Rev A, 2006-04-26 Test report summary The table below summarizes the SAR measurement results obtained for the PY7FD022011 mobile phone model. The results show that the maximum SAR values are below the applicable SAR limit of 1.6 W/kg (1g) and thus the PY7FD022011 mobile phone is in compliance with the appropriate RF exposure standards and recommendations. Mode Maximum SAR 1g (W/kg) Maximum SAR 1g for simultaneous operation with WLAN (W/kg) GSM1900 (Head) 0.30 0.51 GSM1900 (Body) 0.56 0.59 GPRS(2TX)1900 (Body) 0.76 0.79 WLAN (Head) 0.21 - WLAN (Body) 0.03 - 4 (34) EAB-06:018378 Uen, Rev A, 2006-04-26 2 General information The tests reported in this document have been performed in accordance with the SAR measurement standards IEC 62209-1 [1], IEEE Standard 1528 [2] and the FCC Supplement C [3]. The purpose of the tests was to verify that the tested device is in compliance with the appropriate RF exposure standards, recommendations and limits [3-4]. 3 Device under test The table below summarizes the technical data for the tested device. Photographs of the device are presented in Appendix 1. Device model Type Number FAD-3022011-BV; FCC ID PY7FD022011; IC 4170B-FD022011 Serial number of tested unit ALR0000KNM Mode GSM/GPRS(2TX)1900 WLAN 802.11b Antenna Internal Maximum output power level 1 (dBm) GSM1900: 30.5, …

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 1 of 60 \\ut55\2_PROJEKTE\05_closed\4011_1\2-4011-01-04_05 FCC15.247 WLAN.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463 (IC) TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no. : 2-4011-01-04/05 Applicant : Sony Ericsson Mobile Communication s AB Type : FAD-3022011-BV Test Standard : FCC Part 15.247 RSS210 FCC ID : PY7FD022011 Certification No. IC : 4170B-FD022011 CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 2 of 60 Table of contents 1. ADMINISTRATIVE DATA ...................................................................................................................................... 3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items..................................................................................................................................... 3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 APPLICATION DETAILS.......................................................................................................................................... 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ...................................................................................................................................... 5 1.3.2 If RF component testing only, describtion of additional used HW/SW ......................................................... 5 1.3.3 Additional EUT information For IC Canada (appendix 2)...........................................................................6 1.3.3 Additional EUT information For IC Canada (appendix 2)...........................................................................6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2 TESTSTANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES .............................................. 8 3 RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.2 REFERENCED DOCUMENTS.................................................................................................................................. 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.4 ANTENNA GAIN................................................................................................................................................... 10 3.5 PEAK POWER SPECTRAL DENSITY (DIGITALLY MODULATED SYSTEMS) §15.247(E)............................................. 11 3.6 SPECTRUM BANDWIDTH OF A DSSS SYSTEM / 6 DB BANDWITH §15.247(A)(2).................................................. 14 3.7 MAXIMUM OUTPUT POWER (CONDUCTED) §15.247 (B)(3) ................................................................................... 17 3.8 MAX. PEAK OUTPUT POWER (RADIATED) §15.247 (B)(3) ..................................................................................... 21 3.9 BAND-EDGE COMPLIANCE OF CONDUCTED EMISSIONS §15.247 (C) ..................................................................... 22 3.10 BAND-EDGE COMPLIANCE OF RADIATED EMISSIONS §15.205 .............................................................................. 24 3.11 SPURIOUS EMISSIONS - CONDUCTED (TRANSMITTER) §15.247 (C) ...................................................................... 27 3.12 SPURIOUS EMISSIONS - RADIATED (TRANSMITTER) §15.209 ............................................................................... 31 3.13 SPURIOUS EMISSIONS - RADIATED (RECEIVER) §15.109 / 209 ............................................................................. 36 3.14 SPURIOUS EMISSIONS - RADIATED <30 MHZ §15.209 ......................................................................................... 39 3.15 CONDUCTED EMISSIONS <30 MHZ §15.107/207 ................................................................................................. 40 4 PHOTOGRAPHS ..................................................................................................................................................... 45 5 ANNEX C: EXTERNAL PHOTOGRAPHS OF THE EQUIPMENT .....…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 45 of 60 4 Photographs Photo 1 (Radiated Emissions): CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4011-01-04/05 Date: 2006-02-22 Page 46 of 60 Photo 2 (Radiated Emissions): CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681…

Text truncated - open the document above for the full version.