PY7FF051012EDGE PC card

GC86 EDGE PC Card User Guide Contentsi Contents About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii How this guide is organised . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Additional resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Software overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Guidelines for safe and efficient use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disputes and Governing Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 FCC statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 iiContents GC86 EDGE PC Card First edition (August 2006) This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. This manual is copyrighted work of Sony Ericsson Mobile Communications AB, Sweden. The programs referred to herein are copyrighted and trademarked works of Sony Ericsson Mobile Communications AB, Sweden. Reproduction in whole or in part, including utilisation in machines capable of reproduction or retrieval, without the express written permission of the copyright holders is prohibited. Reverse engineering is also prohibited. All other product or service names mentioned in this manual are trademarks of their respective companies. All rights reserved. © Sony Ericsson Mobile Communications AB, 2006 Publication number: EN/LZT 123 8447/33 R1A About this guideiii About this guide Congratulations and thank you for purchasing a Sony Ericsson GC86 PC Card. This book includes an overview of the supported features, detailed technical specifications, system requirements, and safety guidelines for your Sony Ericsson GC86 PC Card. Note: Be sure to read all safety guidelines in this book before using your PC Card. How this guide is organised Chapter 1: Overview on page 1, contains an overview of your Sony Ericsson GC86 PC Card and the features that it supports. It also provides a list of the requirements and tools needed to use your new PC Card. Chapter 2: Technical specifications on page 4, provides detailed technical specifications for your PC Card. Chapter 3: Additional information on page 9, provides safety guidelines, warranty information, and regulations that are relevant to your Sony Ericsson GC86 PC Card. Additional resources Additional resources can be found on the CD that came with your GC86 or on the Internet at the Sony Ericsson support Website. Sony Ericsson support Website You can use the Sony Ericsson Website to find the most up-to-date product information and support wherever you are. It gives you access to online customer services, user manuals, the latest software downloads, and other useful information. For more information, go to: http://www.SonyEricsson.com Publications The following documents are located on the Wireless Manager CD-ROM which is provided with your GC86: •A printed Quick Start Guide aimed at getting you operational as quickly as possible. •An online Wireless Manager User Guide that provides a comprehensive description of how to use Wireless Manager to manage the wireless connections for your GC86. The Wireless Manager User Guide is saved as an Adobe Acrobat PDF file. It is located on the CD-ROM that came with your PC Card. •An online GC86 PC Card User Guide (this document) that contains a detailed description of your GC86 and the features that it supports. The GC86 PC Card User Guide is saved as an Adobe Acrobat PDF file on the CD-ROM that came with your PC Card. The CD-ROM also contains Adobe Acrobat Reader ® which you can install if necessary. 1Overview Overview The GC86 is a quad band GSM PC Card. The GC86 is designed for use in the home and at work; it is very simple to install and use; the software provided allows you to select the best data service available so that the GC86 is always available for data transfer. The GC86 enables your laptop PC to: •Connect to your corporate network •Browse the Internet •Send and receive e-mails •Receive information services in real time •Access files, databases and discussion groups •Send and receive SMS text messages •Edit SIM card entries Note: The Wireless Manager software, which is provided with your PC Card, is the software you use to control your PC Card. Before using your PC Card, read the Wireless Manager User Guide. Wireless Manager must be installed before you insert your PC Card into your PC. The GC86 supports the following services and bands: The GSM, GPRS and EDGE facilities provide almost worldwide portable modem a…

Text truncated - open the document above for the full version.

Date August 2, 2006 ATTESTATION STATEMENT Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Industry Canada Certification & Engineering Bureau 3701 Carling Ave. Bldg. 94 Ottawa, On K2H 8S2 TO WHOM IT MAY CONCERN FCC ID : PY7FF051012 Industry Canada ID : 4170B-FF051012 Model / Type Number : Sony Ericsson GC86 / FAF-1051012-BV We, Sony Ericsson Mobile Communications AB, declare under our sole responsibility, that the device does not support any WLAN IEEE 802.11 operation modes. The end user has no possibility to activate these features. Sincerely, Michael Bower Type Approval Consultant Mobile Computing & PC Cards Sony Ericsson Mobile Communications AB 1 Lakeside Road, Aerospace Centre Farnborough, Hampshire, GU14 6XP, UK Phone: +441252551631 E-mail: [email protected]

Date July 28, 2006 CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Sony Ericsson Mobile Communications AB requests confidentiality for the following products: FCC ID Number Model / Type Number PY7FF051012 GC86 / Type FAF-1051012-BV For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams and PCBs submitted as Equipment Authorization Electronic Filing attachment: “schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description”. 4. Part List and Tune Up Info submitted as Equipment Authorization Electronic Filing attachment: “Part List / Tune Up Info”. The above exhibits contain Sony Ericsson Mobile Communications AB trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our cellular modules. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please contact me at the address shown below. Sincerely, Michael Bower Sony Ericsson Mobile Communications AB 1 Lakeside Road, Aerospace Centre Farnborough, Hampshire, GU14 6XP, UK Phone: +441252551631 E-mail: [email protected]

Company Internal SPECIFICATION 1 (7) Prepared (also subject responsible if other) No. GBFA/GBFAS/SEM/BMD/TP Pam Wood 151 86-KRD 102 339 Uen Approved Checked Date Rev Reference GBFA/GBFA/SEM/BMD/ (Mike Bower) 2006-07-24 C Marking Drawing GC86 Type FAF-1051012- BV The KRD Labels should be marked as described below. All labels must meet print quality requirements outlined in the ANSI Bar Code Print Quality Guideline - ANSI X3.182-1990. All bar codes should be printed to a density between 5.9 CPI and 3.7 CPI. Specifically, barcode quality shall exceed ANSI Grade B or better. Label The label shall be SVF 930 2562 Placing The label shall be placed on the back of the PC card according to the Assembly Drawing (151 88) for the KRD. Print layout

CETECOM ICT Services GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken, Germany Phone: +49 (0) 681 598-0 Fax: -8475 SAR-Laboratory Phone: +49 (0) 681 598-8454 . As of 2006-07-27 Page 1 of 38 Accredited testing laboratory DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Appendix to test report 4-2133-02-01/06 Calibration data, Phantom certificate and detail information of the DASY4 System CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 2 of 38 Table of Content 1 Calibration report “Probe ET3DV6” .................................................................................................................................... 3 2 Calibration report “900 MHz System validation dipole” ................................................................................................... 12 3 Calibration report “1900 MHz System validation dipole” ................................................................................................. 13 4 Calibration certificate of Data Aquisition Unit (DAE) ...................................................................................................... 13 5 Certificate of “SAM Twin Phantom V4.0/V4.0C” ........................................................................................................... 13 6 Application Note System Performance Check ................................................................................................................... 13 2006-07-27 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 3 of 38 1 Calibration report “Probe ET3DV6” CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 4 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 5 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 6 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 7 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 8 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 9 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 10 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 11 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 12 of 38 2 Calibration report “900 MHz System validation dipole” CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 13 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 14 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 15 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 16 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 17 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 18 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 19 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 20 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 21 of 38 3 Calibration report “1900 MHz System validation dipole” CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 22 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 23 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 24 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 25 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 26 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 27 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 28 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 29 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 30 of 38 4 Calibration certificate of Data Aquisition Unit (DAE) CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 31 of 38 5 Certificate of “SAM Twin Phantom V4.0/V4.0C” CETECOM ICT Services GmbH Calibration Data and Phantom Information to test report no.: 4-2133-02-01/06-B As of 2006-07-27 Page 32 of 38 CETECOM ICT Services GmbH Calibration Data and Phantom Information to test r…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken, Germany Phone: +49 (0) 681 598-0 Fax: -8475 SAR-Laboratory Phone: +49 (0) 681 598-8454 . As of 2006-07-31 Page 1 of 99 Accredited testing laboratory DAR registration number: DAT-P-176/94-D1 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Test report no. : 4-2133-02-01/06-B Type identification : FAF-1051012-BV Test specification : IEEE P1528/D1.2 FCC-ID : PY7FF051012 IC-ID : 4170B-FF051012 Test specification : CETECOM ICT Services GmbH Test report no.: 4-2133-02-01/06-B As of 2006-07-31 Page 2 of 99 Table of Contents 1 General Information............................................................................................................................................................... 3 1.1 Notes ............................................................................................................................................................................... 3 1.1.1 Statement of Compliance ....................................................................................................................................... 3 1.2 Testing laboratory............................................................................................................................................................ 4 1.3 Details of applicant.......................................................................................................................................................... 4 1.4 Application details........................................................................................................................................................... 4 1.5 Test item .......................................................................................................................................................................... 5 1.6 Test specification(s) ........................................................................................................................................................ 6 1.6.1 RF exposure limits ................................................................................................................................................. 6 2 Technical test ......................................................................................................................................................................... 7 2.1 Summary of test results ................................................................................................................................................... 7 2.2 Test environment ............................................................................................................................................................. 7 2.3 Measurement and test set-up ........................................................................................................................................... 7 2.4 Measurement system ....................................................................................................................................................... 8 2.4.1 System Description ................................................................................................................................................ 8 2.4.2 Test environment ................................................................................................................................................... 9 2.4.3 Probe description ................................................................................................................................................... 9 2.4.4 Phantom description ............................................................................................................................................ 10 2.4.5 Device holder description .................................................................................................................................... 10 2.4.6 Scanning procedure.............................................................................................................................................. 11 2.4.7 Spatial Peak SAR Evaluation............................................................................................................................... 12 2.4.8 Data Storage and Evaluation................................................................................................................................ 13 2.4.9 Test equipment utilized........................................................................................................................................ 15 2.4.10 Tissue simulating liquids: dielectric properties.................................................................................................... 16 2.4.11 Tissue simulating liquids: parameters.................................................................................................................. 16 2.4.12 Measurement uncertainty evaluation for SAR test .............................................................................................. 17 2.4.13 Measurement uncertainty evaluation for system validation................................................................................. 18 2.4.14 System validation................................................................................................................................................. 19 2.4.15 Validation procedure............................................................................................................................................ 20 2.5 Test results (Body SAR)................................................................................................................................................ 21 2.5.1 General description of test procedures................................................................................................................. 23 2.6 Test results (condu…

Text truncated - open the document above for the full version.

TTI-P-G 081/94-A0 Accredited according to ISO/IEC 17025 Bluetooth Qualification Test Facility (BQTF) FCC listed# 101450 IC recognized # 3925 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM 1) FCC Test Report FCC Part 22,24 / RSS 132,133 FOR: Quad-Band GPRS/EGPRS PC Card MODEL #: GC86 Sony Ericsson Mobile Communications Int. AB 1 Lakeside Road, Aerospace Centre, Farnborough, Hants. GU14 6XP, UK FCC ID: PY7FF051012 IC ID: 4170B-FF051012 TEST REPORT #: SONYU-003-06001_GC86_FCC22-24 DATE: 8/03/2006 Test Report #: SONYU-003-06001_GC86_FCC22-24 Date of Report: 2006-06-12 Page 2 of 80 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT ....................................................................................................................................4 2 ADMINISTRATIVE DATA............................................................................................................... 5 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT.........................5 2.2 IDENTIFICATION OF THE CLIENT...................................................................................................5 2.3 IDENTIFICATION OF THE MANUFACTURER....................................................................................5 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................6 3.1 IDENTIFICATION OF THE EQUIPMENT UNDER TEST.......................................................................6 3.2 IDENTIFICATION OF ACCESSORY EQUIPMENT...............................................................................6 4 SUBJECT OF INVESTIGATION.....................................................................................................7 5 MEASUREMENTS.............................................................................................................................8 5.1 RF POWER OUTPUT.......................................................................................................................8 5.1.1 FCC 2.1046 Measurements required: RF power output.......................................................8 5.1.2 Limits: ...................................................................................................................................8 5.1.2.1 FCC 22.913 (a) Effective radiated power limits. ..............................................................8 5.1.2.2 FCC 24.232 (b)(c) Power limits. .......................................................................................8 5.1.3 Conducted Output Power Measurement procedure:.............................................................8 5.1.4 Results 850 MHz band(conducted): ......................................................................................9 Note: Measured with R&S CMU200 and 16.5dBm Attenuation ...........................................................9 5.1.5 Results 1900 MHz band(conducted): ....................................................................................9 Note: Measured with R&S CMU200 and 16.5dBm Attenuation Radiated Output Power Measurement procedure: ............................................................................................................................................. 9 Radiated Output Power Measurement procedure: .............................................................................10 5.1.6 ERP Results 850 MHz band: ...............................................................................................11 5.1.7 EIRP Results 1900 MHz band:............................................................................................11 5.2 OCCUPIED BANDWIDTH/EMISSION BANDWIDTH........................................................................12 5.2.1 FCC 2.1049 Measurements required: Occupied bandwidth...............................................12 5.2.2 Occupied / emission bandwidth measurement procedure:..................................................12 5.2.3 Occupied / Emission bandwidth results 850 MHz band: ....................................................13 5.2.4 Occupied / Emission bandwidth results 1900 MHz band: ..................................................22 5.3 FREQUENCY STABILITY...............................................................................................................31 5.3.1 Limit ....................................................................................................................................31 5.3.2 FREQUENCY STABILITY : Test Results ............................................................................32 5.3.2.1 FREQUENCY STABILITY (GSM-850)........................................................................32 5.3.2.2 FREQUENCY STABILITY (PCS-1900) .......................................................................32 5.4 SPURIOUS EMISSIONS CONDUCTED.............................................................................................33 5.4.1 FCC 2.1051 Measurements required: Spurious emissions at antenna terminals. ..............33 5.4.2 Limits: .................................................................................................................................33 5.4.2.1 FCC 22.917 Emission limitations for cellular equipment. .............................................33 5.4.2.2 FCC 24.238 Emission limitations for Broadband PCS equipment. ...............................33 5.4.3 Conducted out of band emissions measurement procedure: ...............................................34 5.4.4 Bandedge Results GSM-850 ......................................................…

Text truncated - open the document above for the full version.

This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Test Setup Photos FOR: Quad-Band GPRS/EGPRS PC Card MODEL #: GC86 Sony Ericsson Mobile Communications Int. AB 1 Lakeside Road, Aerospace Centre, Farnborough, Hants. GU14 6XP, UK FCC ID: PY7FF051012 IC ID: 4170B-FF051012 REFERENCE TEST REPORT #: SONYU-003-06001_GC86_FCC22-24 DATE: 8/03/2006 SONYU-003-06001_GC86_FCC22-24 PAGE 2 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents 1 ASSESSMENT .................................................................................................................................... 3 2 TEST SETUP PHOTOS ..................................................................................................................... 4 SONYU-003-06001_GC86_FCC22-24 PAGE 3 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. 1 Assessment The following is in compliance with the applicable criteria specified in FCC rules Parts 2, 22 and 24 of Title 47 of the Code of Federal Regulations and in compliance with the applicable criteria specified in Industry Canada rules RSS132 and RSS133. Company Description Model # Sony Ericsson Mobile Communications Int. AB Quad-Band GPRS/EGPRS PC Card GC 86 SONYU-003-06001_GC86_FCC22-24 PAGE 4 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. 2 TEST SETUP PHOTOS RADIATED EMISSIONS SONYU-003-06001_GC86_FCC22-24 PAGE 5 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. RADIATED EMISSIONS SONYU-003-06001_GC86_FCC22-24 PAGE 6 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. AC LINE CONDUCTION SONYU-003-06001_GC86_FCC22-24 PAGE 7 OF 7 DATE: 8/03/2006 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. AC LINE CONDUCTION