PY7PM-0030GSM/GPRS/EDGE/UMTS/HSPA Smartphone with WLAN, Bluetooth, RFID

Startup guide Xperia ™ T LT30p Sony Mobile Communications AB SE-221 88 Lund, Sweden www.sonymobile.com 1263-5432.1 To view the CE mark 1 2 3 4 1 Open the memory card and the micro SIM card cover. 2 Insert the tip of a pen or a similar object into the hole, then drag out the tray. 3 Open the peel & read label to view the CE mark. Phone basics Phone overview 234 5 67 8 9 10 11 12 1 13 14 15 16 17 18 19 20 1. Notification LED 2. Light sensor 3. Proximity sensor 1 4. Proximity sensor 2 5. Ear speaker 6. Front camera lens 7. Headset connector 8. Power key 9. Volume/Zoom key 10. Camera key 11. Main microphone 12. Touchscreen 13. Second microphone 14. Camera lens 15. Camera LED light 16. Connector for charger/USB cable 17. Speaker 18. SIM card slot 19. microSD™ card slot 20. SIM card/microSD™ card cover Use the accessories provided with your phone, or other compatible accessories, for optimal performance. Turning on the phone To turn on the phone Make sure that the battery is charged for at least 30 minutes before you turn on the phone for the first time. 1 Press and hold down the power key on the right side of the phone until the phone vibrates. 2 Wait a while for the phone to start. Waking up the screen To activate the screen • Briefly press the power key . To unlock the screen • Drag to the right across the screen. Using the keys Back • Go back to the previous screen • Close the on-screen keypad, a dialog box, an options menu, or the Notification panel Home • Go to the Home screen Task • Tap to open a window showing your most recently used applications and a small apps bar Set up your phone What is Android™? Android is your phone's operating system. Since it's developed by Google™, your phone is preloaded with several Google™ services, such as Google Maps™ and Google™ web search. To use some of the services provided by Google™, you need a Google account. What is different about Android? Android™ is an open system, which means that you're not limited to using applications and services from only one provider. Google™ account With a Google™ account, you can use Gmail™ to send emails, Google Talk™ to chat with friends, and Google Play™ to download applications and games, music, movies and books. To set up a Google™ account in your phone 1 From your Home screen, tap . 2 Find and tap Settings > Accounts & sync > Add account > Google. 3 Follow the registration wizard to create a Google™ account, or sign in if you already have an account. Your phone is now ready to use with Gmail™ , Google Talk™ and Google Calendar™. You can also sign in or create a Google™ account from the setup guide the first time you start your phone. Or you can go online and create an account at www.google.com/accounts. Basic settings The first time you start your phone, a setup guide explains basic phone functions and helps you enter essential settings. You can also access the setup guide later. To access the setup guide manually 1 From the Home screen, tap . 2 Find and tap Setup guide. Transferring contacts to your new phone Transferring contacts to your new phone can sometimes be complicated, but help is available. You can transfer contacts from several phone brands, including iPhone, Samsung, HTC and Nokia. You need: • An Internet-connected PC running Windows® • A USB cable for your old phone • A USB cable for your new Android™ phone • Your old phone • Your new Android™ phone If you don't have access to all of the items listed above, go to www.sonymobile.com to find out about other ways to transfer your contacts. Get started transferring your contacts Use the PC Companion program to transfer your contacts. It's free, and the installation files are already saved on your new phone. PC Companion also offers a range of other features, including help to update your phone software. To install PC Companion 1 New phone: Turn on your new Android™ phone and connect it to a PC using a USB cable. 2 New phone: Tap Install to install PC Companion on the PC. 3 Computer: If a popup window appears, select Run Startme.exe. In the new popup window that appears, click Install to start the installation and then follow the instructions to complete the installation. To transfer contacts to your new phone using PC Companion 1 Make sure that PC Companion is installed on your PC. 2 Open the PC Companion program on the PC, then click Contacts Setup and follow the instructions to transfer your contacts. Welcome Important information Please read the Important information leaflet before you use your mobile phone. Assembly To insert the memory card and the micro SIM card The memory card may not be included at purchase in all markets. July 5, 2012 13:49:00 LT30p__Booklet_EN_1263-5432.1.pdf 1 of 2 Finding your way Home screen Your phone Home screen is the equivalent of the desktop on a computer. You can customise your Home screen with widgets, shortcuts, folders, themes, wallpaper and other items. The Home screen extends beyond the regular screen display width, so you need to flick left or right to view content in one of the screen's four extensions. The items in the bar at the bottom of the screen are always available for quick access. To go to the Home screen • Press . To browse the Home screen • Flick right or left. To change your Home screen wallpaper 1 Tap an empty area on your Home screen, then tap . 2 Tap Wallpaper and select an option. Widgets Widgets are small applications that you can use directly on your Home screen. For example, the Music player widget allows you to start playing music directly. Some widgets are resizable, so you can expand them to view more content or shrink them to save space on your Home screen. Application screen The Application screen, which you open from your Home screen, contains the applications that come installed with your phone as well as the applications you download. The Application screen extends beyond the regular screen width, so you need to flick left and right to view all content. To open the Notification pane…

Text truncated - open the document above for the full version.

SONY Sony Mobile Communications SE-221 88 LUND· SWEDEN Confidentiality Request 2012-08-13 CGQBDA 12:330 SoM/CGQBDA Afrah Sadiq +46 10 80 12250 Receiver Federal Communications Commission Subject: Request for Confidentiality FCC 10: PY7PM-0030 To Whom It May Concern: In accordance with §0.459 of CFR 47, Sony Mobile Communications AB requests confidentiality for the below listed items for our Sony mobile phone type PM-0030-BV, FCC ID: PY7PM-0030: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational/Technical Descriptions These items contain detailed system and equipment description and related information about the product which Sony Mobile Communications AB considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Mobile Communications AB also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Best Regards, Afrah Sadiq Staff Verification Engineer Global Type Approval Sony Mobile Communications Nya Vattentomet 221 88 Lund, Sweden Fax: +46 10 80 02441 sOQvmcLilp.ccm Sony Mobile Communications Styrelsens sate: Lund Momsnr • VA T. No: SE556615665801 Regis/ered office: Lund Organlsatiansnr • Reg No: 556615-6658 Postadress • Mail BesoksadrS6S • Office address Telelan • Telephone Telelax • Telefax SE-221 88 Lund Nya Vattentornet Nat 010-80 00000 Nat 010-8002040 SWeden Lund Int +46 108000000 Int ·H6 10 80 02040

Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 60 of 71 Annex B External photographs of the EUT Photo documentation: Photo 1: Photo 2: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 61 of 71 Photo 3: Photo 4: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 62 of 71 Photo 5: Photo 6:

1(3) Document number Revision 1267-0775 2 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Anna Englund 2012-06-27 Contents responsible if other than preparer Remarks Approved by SEM/CGOVDPLG, Anna Englund LT30p Mint Rita, MoP-label content, preprinted label page 2 and 3, non geo 1 General information 2 Information Label Tray, Page 2, preprinted Content Format Line 1a (18,5/1,0) WEEE trashcan without bar symbol Graphics, min. height 5mm,. Line 1b (18,5/5,7) CE approval symbol Graphics, height 5 mm. Mobile Phone label part no • 1265-7632 Content • Page 2 and 3 will be preprinted by the supplier, acc to below Text If applicable, or nothing else specified, Zebra printer Arial Narrow is imposed. When needed, the text is adjusted to fit the label. Coordinates “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. 2(3) Document number Revision 1267-0775 2 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Anna Englund 2012-06-27 Contents responsible if other than preparer Remarks Approved by SEM/CGOVDPLG, Anna Englund 3 Information Label Tray, Page 3, preprinted Content Format Line 1 (3,0/5 ,0) Company name, SONY stylized name Graphics, Height 2 mm, width 11,3 mm Line 2 (6,0/5 ,0) “TYPE: PM-0030-BV” Text, height 1,2 mm. . Line 3 (8,0/5 ,0) “FCC ID: PY7PM-0030” Text, height 1,2 mm, Line 3 (10,0/5,0) “IC ID: 4170B-PM0030” Text, height 1,2 mm, Line 5a (18,5/5,0) Text; The notified body number “0682” Text, height 5mm, width 1,3 Line 5b (18,5/11,2) Graphics; “Alert Symbol” Height 5 mm. width 5 mm 4 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. Conceptual picture Label Tray – peel-read 3(3) Document number Revision 1267-0775 2 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Anna Englund 2012-06-27 Contents responsible if other than preparer Remarks Approved by SEM/CGOVDPLG, Anna Englund double underlined = major changes since last revision. 1(6) Document number Revision 1267-0783. Uen 1 Sony Mobile Communications AB Prepared by Date CGOVPDPLG, Anna Englund 2012-06-05 Contents responsible if other than preparer Remarks Approved by CGOVPDPLG, Anna Englund Mint label disposition on LT30p Abstract This document contains information on the phone label design required for Type Approval. This document is valid for Mint Rita LT30p. There will be a similar document for Mint Amy LT30at Type number: PM-0030-BV Marketing name: LT30p Contents 1 Mint Label Disposition ....................................................................... 1 2 Drawing of phone label front and back............................................... 3 2.1 Front, page one ................................................................................. 3 2.2 Front, page two and three - CE marking and Type numbers .............. 3 2.3 Back .................................................................................................. 5 3 Made in statement, SIM-and SD card info ......................................... 5 4 SONY name placement on phone ..................................................... 6 1 Mint Label Disposition There are no pictures of the sharp phone labels, only drawings of the sharp label. All pictures are from prototype labels and all label pictures are from the Rita and Amy AP- build . Mint Mobile Phone Label Content information is spread over three different labels; 1) Label tray Front, page one, semi dynamic information 2) Label tray front page two and three (the so called peel read. This label is preprinted by the label supplier) 3) Label tray back, contains dynamic info such as IMEI number 2(6) Document number Revision 1267-0783. Uen 1 Sony Mobile Communications AB Prepared by Date CGOVPDPLG, Anna Englund 2012-06-05 Contents responsible if other than preparer Remarks Approved by CGOVPDPLG, Anna Englund It is important in the User Documentation to include drawings, and clearly stated and show the customer where to find the CE-marking symbols and the IMEI-number.Below pictures illustrates where the label is located under the front tray and how to open it 1) Shows who to open the lid, where the label tray, SIM-card and Micro SD card are to inserted How to open the label tray and what it looks like once it has be opened 3(6) Document number Revision 1267-0783. Uen 1 Sony Mobile Communications AB Prepared by Date CGOVPDPLG, Anna Englund 2012-06-05 Contents responsible if other than preparer Remarks Approved by CGOVPDPLG, Anna Englund 2 Drawing of phone label front and back 2.1 Front, page one Below is the drawing of the sharp label for the regular non geographical version. According to SPACE label content part 1266-9158 for front label on tray Below is a picture of opened label tray, with prototype label content. The below picture shows how the label will be pasted on the front of the tray. 2.2 Front, page two and three - CE marking and Type numbers In order to be able to find the CE-mark symbols, the label on the front label tray must be opened as illustrated in the two picture below. The document is uploaded in SPACE, number 1265-7632 4(6) Document number Revision 1267-0783. Uen 1 Sony Mobile Communications AB Prepared by Date CGOVPDPLG, Anna Englund 2012-06-05 Contents responsible if other than preparer Remarks Approved by CGOVPDPLG, Anna Englund Below page two and three of the opened peel read label will contain the CE-mark symbols, as illustrated in the below drawing. 5(6) Document number Revision 1267-0783. Uen 1 Sony Mobile Communications AB Prepared by Date CGOVPDPLG, Anna Englund 2012-06-05 Contents responsible if other than preparer Remarks Approved by CGOVPDPLG, Anna Englund The label is preprinted at the supplier’s DeRoyal Mark. …

Text truncated - open the document above for the full version.

Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 63 of 71 Annex C Internal photographs of the EUT Photo documentation: Photo 1: Photo 2: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 64 of 71 Photo 3: Photo 4: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 65 of 71 Photo 5: Photo 6: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 66 of 71 Photo 7: Photo 8: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 67 of 71 Photo 9: Photo 10: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 68 of 71 Photo 11: Photo 12: Test report no.: 1-4254/12-26-07-A 2012-08-10 Page 69 of 71 Photo 13: Photo 14:

Page 1 of 261 TEST REPORT Test Report No.: 1-4254/12-18-02-A Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Sony Mobile Communications AB Nya Vattentornet 22188 Lund/SWEDEN Phone: +46 46 19 30 00 Contact: Håkan Sjöberg e-mail: [email protected] Phone: +46 46 19 35 59 Fax: +46 46 19 32 95 Manufacturer Sony Mobile Communications AB Nya Vattentornet 22188 Lund/SWEDEN Test Standard/s IEEE 1528-2003 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR)in the Human Head from Wireless Communications Devices: Measurement Techniques OET Bulletin 65 Supplement C Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields RSS-102 Issue 4 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Mobile Phone Device type: portable device Model name: PM-0030-BV S/N serial number: CB511ZXHQ0 / CB511ZY9K9 (WLAN) FCC-ID: PY7PM-0030 IC: 4170B-PM0030 IMEI-Number: 00440214-5722256 Hardware status: AP1.2 Software status: 7.0.A.1.68 / atp_mint_0_0_52 Frequency: see technical details Antenna: integrated antenna Battery option: Integrated battery Accessories: Stereo headset Test sample status: identical prototype Exposure category: general population / uncontrolled environment This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test Report authorised: Test performed: 2012-08-03 Thomas Vogler 2012-08-03 Oleksandr Hnatovskiy Senior Testing Manager Testing Manager Test report no.: 1-4254/12-18-02-A Page 2 of 261 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information .................................................................................................................................. 4 2.1 Notes and disclaimer ..................................................................................................................... 4 2.2 Application details ......................................................................................................................... 4 2.3 Statement of compliance ............................................................................................................... 4 2.4 Technical details............................................................................................................................. 5 3 Test standards/ procedures references .................................................................................................. 6 3.1 RF exposure limits ......................................................................................................................... 7 4 Summary of Measurement Results ......................................................................................................... 8 5 Test Environment ...................................................................................................................................... 8 6 Test Set-up ................................................................................................................................................. 9 6.1 Measurement system ..................................................................................................................... 9 6.1.1 System Description ................................................................................................................ 9 6.1.2 Test environment ................................................................................................................. 10 6.1.3 Probe description ................................................................................................................. 10 6.1.4 Phantom description ............................................................................................................ 11 6.1.5 Device holder description .................................................................................................... 11 6.1.6 Scanning procedure ............................................................................................................ 12 6.1.7 Spatial Peak SAR Evaluation .............................................................................................. 13 6.1.8 Data Storage and Evaluation............................................................................................... 14 6.1.9 Tissue simulating liquids: dielectric properties .................................................................... 16 6.1.10 Tissue simulating liquids: parameters ................................................................................. 17 6.1.11 Measurement uncertainty evaluation for SAR test .............................................................. 18 6.1.12 Measurement uncertainty evaluation for SAR test > 3 GHz ............................................... 19 6.1.13 Measurement uncertainty evaluation for system check ...................................................... 20 6.1.14 Measurement uncertainty evaluation for system check > 3 GHz ........................................ 21 6.1.15 System check ...........................................................................…

Text truncated - open the document above for the full version.

Page 1 of 12 Annex C Photo documentation Appendix to Test Report No.: 1-4254/12-18-02-A Testing Laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Annex C to Test report no.: 1-4254/12-18-02-A Page 2 of 12 Photo 1: Measurement System DASY 4 Photo 2: DUT - front view Annex C to Test report no.: 1-4254/12-18-02-A Page 3 of 12 Photo 3: DUT - side view Photo 4: DUT - rear view Annex C to Test report no.: 1-4254/12-18-02-A Page 4 of 12 Photo 5: DUT - label Photo 6: Test position left hand touched Annex C to Test report no.: 1-4254/12-18-02-A Page 5 of 12 Photo 7: Test position left hand touched Photo 8: Test position left hand touched Annex C to Test report no.: 1-4254/12-18-02-A Page 6 of 12 Photo 9: Test position left hand tilted 15° Photo 10: Test position left hand tilted 15° Annex C to Test report no.: 1-4254/12-18-02-A Page 7 of 12 Photo 11: Test position right hand touched Photo 12: Test position right hand touched Annex C to Test report no.: 1-4254/12-18-02-A Page 8 of 12 Photo 13: Test position right hand touched Photo 14: Test position right hand tilted 15° Annex C to Test report no.: 1-4254/12-18-02-A Page 9 of 12 Photo 15: Test position right hand tilted 15° Photo 16: Test position body hot spot front side with 10 mm distance Annex C to Test report no.: 1-4254/12-18-02-A Page 10 of 12 Photo 17: Test position body hot spot rear side with 10 mm distance Photo 18: Test position body hot spot left side with 10 mm distance Annex C to Test report no.: 1-4254/12-18-02-A Page 11 of 12 Photo 19: Test position body hot spot right side with 10 mm distance Photo 20: Test position body hot spot bottom side with 10 mm distance Annex C to Test report no.: 1-4254/12-18-02-A Page 12 of 12 Photo 21: Test position body hot spot top side with 10 mm distance Photo 22: Test position body worn rear side with 15 mm distance

2012-08-30 Page 1 of 71 TEST REPORT Test report no.: 1-4254/12-26-07-B Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications Sony Mobile Communications AB Nya Vattentornet 22188 Lund / SWEDEN Phone: +46 46 19 30 00 Fax: +46 46 19 32 95 Contact: Håkan Sjöberg e-mail: [email protected] Phone: +46 46 19 35 59 Manufacturer Sony Mobile Communications AB Nya Vattentornet 22188 Lund / SWEDEN Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications - Radio Standards Specification Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM Mobile Phone GPRS/EGPRS 850/900/1800/1900; UMTS FDDI/FDDII/FDDIV/FDDV/FDDVIII; HSPA; BT3.1; WLAN a/b/g/n; AGPS; RFID, FM Rx Model name: PM-0030-BV FCC ID: PY7PM-0030 IC: 4170B-PM0030 Frequency: ISM band 2400 MHz to 2483.5 MHz (lowest channel 01 – 2412 MHz; highest channel 11 – 2462 MHz) Technology tested: WLAN (DSSS / b – mode; OFDM / g – mode and OFDM / n HT20 – mode) Antenna: Integrated antenna Power Supply: 3.7 V DC by Li - polymer battery Temperature Range: -20°C to +55 °C Test report authorised: Test performed: 2012-08-30 Marco Bertolino 2012-08-30 Christoph Schneider Testing Manager Test report no.: 1-4254/12-26-07-B 2012-08-30 Page 2 of 71 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Summary of measurement results ............................................................................................................... 5 8 RF measurements .......................................................................................................................................... 6 8.1 Description of test setup .................................................................................................................... 6 8.1.1 Radiated measurements............................................................................................................. 6 8.1.2 Conducted measurements.......................................................................................................... 7 8.2 Additional comments .......................................................................................................................... 7 8.3 RSP100 test report cover sheet / performance test data ................................................................ 8 9 Measurement results ...................................................................................................................................... 9 9.1 Output power verification (conducted) ............................................................................................. 9 9.2 Antenna gain ........................................................................................................................................ 9 9.3 Maximum output power .................................................................................................................... 10 9.4 Power spectral density ..................................................................................................................... 12 9.5 Spectrum bandwidth – 6 dB / 75 % power bandwidth (EBW) ....................................................... 12 9.6 Spectrum bandwidth – 20 dB / 99 % power bandwidth ................................................................. 12 9.7 Band edge compliance conducted .................................................................................................. 12 9.8 Band edge compliance radiated ...................................................................................................... 13 9.9 TX spurious emissions conducted .................................................................................................. 16 9.10 TX spurious emissions radiated................................................................................................... 17 9.11 RX spurious emissions radiated ..................................................................................................…

Text truncated - open the document above for the full version.

2012-08-30 Page 1 of 62 TEST REPORT Test report no.: 1-4254/12-26-10-A Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications Sony Mobile Communications AB Nya Vattentornet 22188 Lund / SWEDEN Phone: +46 46 19 30 00 Fax: +46 46 19 32 95 Contact: Håkan Sjöberg e-mail: [email protected] Phone: +46 46 19 35 59 Manufacturer Sony Mobile Communications AB Nya Vattentornet 22188 Lund / SWEDEN Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Pa…

Text truncated - open the document above for the full version.